T113-S3 G2D 裸机测试

L13819506056 LV 5

终于将G2D裸机环境使用搞定了。简单测试了一下bitblt 和矩形填充。

extern const unsigned char image_mn_map[800*480*4];/*图片文件*/
void  g2d_test(void)
{
   g2d_probe();
   g2d_open();
	 g2d_blt_h blit_para;
   while(1)
   {
      /* bitblt测试  */
      memset(&blit_para,0,sizeof(g2d_blt_h));
      g2d_image_enh *src = &blit_para.src_image_h;
      g2d_image_enh *des = &blit_para.dst_image_h;
      blit_para.flag_h   =  G2D_ROT_180;//G2D_ROT_V;// G2D_ROT_0;

      src->laddr[0] = (uint32_t)image_mn_map;
      src->align[0] = 4;
      src->clip_rect.w = 800;
      src->clip_rect.h = 480;
      src->width       = 800;
      src->height      = 480;
      src->format      = G2D_FORMAT_ARGB8888;
      src->mode        = G2D_PIXEL_ALPHA;
      src->bpremul     = 0;

      des->laddr[0]    = r528_de_config.LayerAddr[0] ;
      des->align[0]    = 4;
      des->clip_rect.w = 800;
      des->clip_rect.h = 480;
      des->width       = 800;
      des->height      = 480;
      des->format      = G2D_FORMAT_ARGB8888;
      des->mode        = G2D_PIXEL_ALPHA;
      des->bpremul     = 0;
      long ret         = g2d_ioctl( G2D_CMD_BITBLT_H, (unsigned long )&blit_para);

      /* 矩形填充测试  */
      g2d_fillrect_h fill_para;
      memset(&fill_para,0,sizeof(g2d_fillrect_h));
      src = &fill_para.dst_image_h;
      src->laddr[0] = (uint32_t)r528_de_config.LayerAddr[0] ;;
      src->align[0] = 4;
      src->clip_rect.w = 800;
      src->clip_rect.h = 480;
      src->width       = 800;
      src->height      = 480;
      src->format      = G2D_FORMAT_ARGB8888;
      src->mode = G2D_PIXEL_ALPHA;
      src->bpremul = 0;
      src->gamut = G2D_BT709;
      src->color = 0xFFFF0000;
      src->alpha = 0xff;
      ret = g2d_ioctl( G2D_CMD_FILLRECT_H, (unsigned long )&fill_para);
   }
}

smiletiger LV 6

@l13819506056 在 T113-S3 G2D 裸机测试中说：

终于将G2D裸机环境使用搞定了。简单测试了一下bitblt 和矩形填充。

extern const unsigned char image_mn_map[800*480*4];/*图片文件*/
void  g2d_test(void)
{
   g2d_probe();
   g2d_open();
	 g2d_blt_h blit_para;
   while(1)
   {
      /* bitblt测试  */
      memset(&blit_para,0,sizeof(g2d_blt_h));
      g2d_image_enh *src = &blit_para.src_image_h;
      g2d_image_enh *des = &blit_para.dst_image_h;
      blit_para.flag_h   =  G2D_ROT_180;//G2D_ROT_V;// G2D_ROT_0;

      src->laddr[0] = (uint32_t)image_mn_map;
      src->align[0] = 4;
      src->clip_rect.w = 800;
      src->clip_rect.h = 480;
      src->width       = 800;
      src->height      = 480;
      src->format      = G2D_FORMAT_ARGB8888;
      src->mode        = G2D_PIXEL_ALPHA;
      src->bpremul     = 0;

      des->laddr[0]    = r528_de_config.LayerAddr[0] ;
      des->align[0]    = 4;
      des->clip_rect.w = 800;
      des->clip_rect.h = 480;
      des->width       = 800;
      des->height      = 480;
      des->format      = G2D_FORMAT_ARGB8888;
      des->mode        = G2D_PIXEL_ALPHA;
      des->bpremul     = 0;
      long ret         = g2d_ioctl( G2D_CMD_BITBLT_H, (unsigned long )&blit_para);

      /* 矩形填充测试  */
      g2d_fillrect_h fill_para;
      memset(&fill_para,0,sizeof(g2d_fillrect_h));
      src = &fill_para.dst_image_h;
      src->laddr[0] = (uint32_t)r528_de_config.LayerAddr[0] ;;
      src->align[0] = 4;
      src->clip_rect.w = 800;
      src->clip_rect.h = 480;
      src->width       = 800;
      src->height      = 480;
      src->format      = G2D_FORMAT_ARGB8888;
      src->mode = G2D_PIXEL_ALPHA;
      src->bpremul = 0;
      src->gamut = G2D_BT709;
      src->color = 0xFFFF0000;
      src->alpha = 0xff;
      ret = g2d_ioctl( G2D_CMD_FILLRECT_H, (unsigned long )&fill_para);
   }
}

请问可以共享一下更多的细节吗,一直也在研究裸机G2D,一直搞不定看了linux的源代码
void g2d_top_set_base(unsigned long base)
{
g2d_top = (struct g2d_top_reg *)(base);
mixer_glb = (struct g2d_mixer_glb_reg *)(base + 0x0100);
}

void g2d_rot_set_base(unsigned long base)
{
base_addr = base;
}

这里的基址base是多少啊,是不是0x05410000

L13819506056 LV 5

__s32 drv_g2d_init(void)
{
	memset(&g2d_ext_hd, 0, sizeof(__g2d_drv_t));
	init_wait_event(&g2d_ext_hd.wait_event);
	g2d_top_set_base((unsigned long) para.io);

#if defined(CONFIG_SUNXI_G2D_ROTATE)
	g2d_rot_set_base((unsigned long) para.io);
#endif
	return 0;
}


int g2d_probe(void )
{

	__g2d_info_t *info = NULL;

	info = &para;
	info->dev =  0;
	info->io =  (__u32 *)0x05410000;
 	info->irq = 121;
  info->clk = (__u32 *)0x02001630;
  info->clk_parent = 0;
  info->bus_clk = (__u32 *)0x0200163c;
	info->mbus_clk = (__u32 *)0x02001804;

  bsp_int_vect_set(info->irq,  /* Assign ISR handler. */
                   8u,            /* 中断的优先级         */
                   1u,            /* 中断的目标CPU        */
                   0u,            /* 参数                 */
                   g2d_handle_irq);

  irq_enable(info->irq);//
	drv_g2d_init();
	mutex_init(&info->mutex);
	mutex_init(&global_lock);
	return 0;

}

smiletiger LV 6

@l13819506056 谢谢回复,我先按照你提供的代码理解下移植下,谢谢你兄弟

smiletiger LV 6

@l13819506056 请问可以提供一下裸机g2d部分的全部驱动吗,我愿意给红包,因为自己对linux不太熟,感觉要修改好多才能用在裸机上,可否把g2d部分的代码打包发给我参考下,谢谢