T113-S3 的XR829 连上网之后，一直打印[AP_WRN] [STA] ASSOC HTCAP 11N 58

[captain]

主控：T113
wifi模块：XR829
SDK:longan_sdk
在连上wifi 之后，就一直打印如下信息，请问一下这个是什么回事

[  586.553631] [AP_WRN] [STA] ASSOC HTCAP 11N 58
[  586.558528] [AP_WRN] [HT40][xradio_bss_info_changed][ht_prot:0x00000004][HtProtMode:0x0001][Green:0x0000]
[  586.560386] [AP_WRN] [HT40][xradio_bss_info_changed][PhyModeCfg:0x5007]
[  586.560386] [ModemFlags    :0x00000007]
[  586.560386] [ChWidthCfg    :0x00000000]
[  586.560386] [PriChCfg      :0x00000000]
[  586.560386] [BandCfg       :0x00000000]
[  586.560386] [STBC_Enable   :0x00000000]
[  586.560386] [PreambleCfg   :0x00000001]
[  586.560386] [SGI_Enable    :0x00000001]
[  586.560386] [GF_Enable     :0x00000000]
[  627.716151] [AP_WRN] [STA] ASSOC HTCAP 11N 58
[  627.721115] [AP_WRN] [HT40][xradio_bss_info_changed][ht_prot:0x00000000][HtProtMode:0x0000][Green:0x0000]
[  627.722846] [AP_WRN] [HT40][xradio_bss_info_changed][PhyModeCfg:0x5007]
[  627.722846] [ModemFlags    :0x00000007]
[  627.722846] [ChWidthCfg    :0x00000000]
[  627.722846] [PriChCfg      :0x00000000]
[  627.722846] [BandCfg       :0x00000000]
[  627.722846] [STBC_Enable   :0x00000000]
[  627.722846] [PreambleCfg   :0x00000001]
[  627.722846] [SGI_Enable    :0x00000001]
[  627.722846] [GF_Enable     :0x00000000]
[  627.921806] [AP_WRN] [STA] ASSOC HTCAP 11N 58
[  627.926705] [AP_WRN] [HT40][xradio_bss_info_changed][ht_prot:0x00000004][HtProtMode:0x0001][Green:0x0000]
[  627.928532] [AP_WRN] [HT40][xradio_bss_info_changed][PhyModeCfg:0x5007]
[  627.928532] [ModemFlags    :0x00000007]
[  627.928532] [ChWidthCfg    :0x00000000]
[  627.928532] [PriChCfg      :0x00000000]
[  627.928532] [BandCfg       :0x00000000]
[  627.928532] [STBC_Enable   :0x00000000]
[  627.928532] [PreambleCfg   :0x00000001]
[  627.928532] [SGI_Enable    :0x00000001]
[  627.928532] [GF_Enable     :0x00000000]
[  664.994049] [AP_WRN] [STA] ASSOC HTCAP 11N 58
[  664.998968] [AP_WRN] [HT40][xradio_bss_info_changed][ht_prot:0x00000000][HtProtMode:0x0000][Green:0x0000]
[  665.001088] [AP_WRN] [HT40][xradio_bss_info_changed][PhyModeCfg:0x5007]
[  665.001088] [ModemFlags    :0x00000007]
[  665.001088] [ChWidthCfg    :0x00000000]
[  665.001088] [PriChCfg      :0x00000000]
[  665.001088] [BandCfg       :0x00000000]
[  665.001088] [STBC_Enable   :0x00000000]
[  665.001088] [PreambleCfg   :0x00000001]
[  665.001088] [SGI_Enable    :0x00000001]
[  665.001088] [GF_Enable     :0x00000000]
[  665.196802] [AP_WRN] [STA] ASSOC HTCAP 11N 58
[  665.201824] [AP_WRN] [HT40][xradio_bss_info_changed][ht_prot:0x00000004][HtProtMode:0x0001][Green:0x0000]
[  665.203601] [AP_WRN] [HT40][xradio_bss_info_changed][PhyModeCfg:0x5007]
[  665.203601] [ModemFlags    :0x00000007]
[  665.203601] [ChWidthCfg    :0x00000000]
[  665.203601] [PriChCfg      :0x00000000]
[  665.203601] [BandCfg       :0x00000000]
[  665.203601] [STBC_Enable   :0x00000000]
[  665.203601] [PreambleCfg   :0x00000001]
[  665.203601] [SGI_Enable    :0x00000001]
[  665.203601] [GF_Enable     :0x00000000]

[wulong]

@captain 打印的频率如何？路由器的beacon信息如果有变化，是会有这个打印的，属于正常打印。可以换个路由器看看。

[captain]

@wulong
这个频率一分钟不到就会打印一次，换了路由器就好了。