使用D1-H驱动树莓派DSI屏幕
-
续这位仁兄的贴子:https://bbs.aw-ol.com/topic/263
屏幕链接:https://item.taobao.com/item.htm?id=623507778498
转接板工程:
坑1:这个屏幕竟然是1lane,并非2lane。
坑2:卖家没给具体时序参数,看来得从屏幕上iic配置抓。
还没详细调时序参数,但初步已有显示。
软件过几天有空了详细调试后整理上传。
-
还是有点偏,改天再抓数据研究
不能不过七夕啊对吧
-
大佬, 是这样改吗?
只要改 linux-5.4/board.dts, uboot-board.dts 这两个文件就可以了吗?
为什么我改完之后屏幕没有显示呢?
-
device nand0 <nand>, # parts = 4 #: name size offset mask_flags 0: boot0 0x00100000 0x00000000 1 1: uboot 0x00300000 0x00100000 1 2: secure_storage 0x00100000 0x00400000 1 3: sys 0x0fb00000 0x00500000 0 active partition: nand0,0 - (boot0) 0x00100000 @ 0x00000000 defaults: mtdids : nand0=nand mtdparts: mtdparts=nand:1024k@0(boot0)ro,3072k@1048576(uboot)ro,1024k@4194304(secure_storage)ro,-(sys) [00.760]ubi0: attaching mtd4 [01.155]ubi0: scanning is finished [01.164]ubi0: attached mtd4 (name "sys", size 251 MiB) [01.169]ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 258048 bytes [01.175]ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 2048 [01.182]ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [01.188]ubi0: good PEBs: 1004, bad PEBs: 0, corrupted PEBs: 0 [01.193]ubi0: user volume: 9, internal volumes: 1, max. volumes count: 128 [01.200]ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0 [01.208]ubi0: available PEBs: 0, total reserved PEBs: 1004, PEBs reserved for bad PEB handling: 40 [01.216]sunxi flash init ok [01.219]line:714 init_clocks __clk_init: clk pll_periph0x2 already initialized register fix_factor clk error [01.229]drv_disp_init request pwm success, pwm2:pwm2:0x2000c00. [01.246]drv_disp_init finish [01.248]boot_gui_init:start [01.251]set disp.dev2_output_type fail. using defval=0 [01.443]boot_gui_init:finish
早上看看,uboot都没启动。
-
device nand0 <nand>, # parts = 4 #: name size offset mask_flags 0: boot0 0x00100000 0x00000000 1 1: uboot 0x00300000 0x00100000 1 2: secure_storage 0x00100000 0x00400000 1 3: sys 0x0fb00000 0x00500000 0 active partition: nand0,0 - (boot0) 0x00100000 @ 0x00000000 defaults: mtdids : nand0=nand mtdparts: mtdparts=nand:1024k@0(boot0)ro,3072k@1048576(uboot)ro,1024k@4194304(secure_storage)ro,-(sys) [00.647]ubi0: attaching mtd4 [01.042]ubi0: scanning is finished [01.052]ubi0: attached mtd4 (name "sys", size 251 MiB) [01.057]ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 258048 bytes [01.063]ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 2048 [01.069]ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [01.076]ubi0: good PEBs: 1004, bad PEBs: 0, corrupted PEBs: 0 [01.081]ubi0: user volume: 9, internal volumes: 1, max. volumes count: 128 [01.088]ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0 [01.095]ubi0: available PEBs: 0, total reserved PEBs: 1004, PEBs reserved for bad PEB handling: 40 [01.104]sunxi flash init ok [01.107]line:714 init_clocks __clk_init: clk pll_periph0x2 already initialized register fix_factor clk error [01.117]drv_disp_init request pwm success, pwm2:pwm2:0x2000c00. [01.134]drv_disp_init finish [01.136]boot_gui_init:start [01.139]set disp.dev2_output_type fail. using defval=0 [01.331]boot_gui_init:finish [01.743]LCD open finish partno erro : can't find partition bootloader 54 bytes read in 0 ms [01.904]bmp_name=bootlogo.bmp size 307254 307254 bytes read in 30 ms (9.8 MiB/s) [02.148]Loading Environment from SUNXI_FLASH... OK [02.181]out of usb burn from boot: not need burn key [02.206]update bootcmd [02.228]change working_fdt 0x5eaafda8 to 0x5ea8fda8 [02.249]update dts Hit any key to stop autoboot: 0 Android's image name: d1-nezha No reserved memory region found in source FDT [03.178] Starting kernel ... [ 0.000000] OF: fdt: Ignoring memory range 0x40000000 - 0x40200000 [ 0.000000] Linux version 5.4.61 (cube@ubuntu) (riscv64-unknown-linux-gnu-gcc (C-SKY RISCV Tools V1.8.4 B20200702) 8.1.0, GNU ld (GNU Binutils) 2.32) #37 PREEMPT Sat Aug 21 02:51:22 UTC 2021 [ 0.000000] cma: Reserved 8 MiB at 0x000000005f800000 [ 0.000000] Zone ranges:
刚刚恢复了一下,正常的启动日志是这样的。
-
$ git diff nezha/uboot-board.dts diff --git a/configs/nezha/uboot-board.dts b/configs/nezha/uboot-board.dts index 793dec2..3df96b1 100644 --- a/configs/nezha/uboot-board.dts +++ b/configs/nezha/uboot-board.dts @@ -268,10 +268,10 @@ lcd_if = <4>; lcd_x = <800>; - lcd_y = <1280>; + lcd_y = <480>; lcd_width = <52>; lcd_height = <52>; - lcd_dclk_freq = <70>; + lcd_dclk_freq = <34>; lcd_pwm_used = <1>; lcd_pwm_ch = <2>; @@ -282,12 +282,12 @@ lcd_hbp = <32>; lcd_ht = <868>; lcd_hspw = <4>; - lcd_vbp = <12>; - lcd_vt = <1311>; + lcd_vbp = <10>; + lcd_vt = <520>; lcd_vspw = <4>; lcd_dsi_if = <0>; - lcd_dsi_lane = <4>; + lcd_dsi_lane = <1>; lcd_lvds_if = <0>; lcd_lvds_colordepth = <0>; lcd_lvds_mode = <0>;
$ git diff nezha/linux-5.4/board.dts diff --git a/configs/nezha/linux-5.4/board.dts b/configs/nezha/linux-5.4/board.dts index bfeed6c..de0cacf 100755 --- a/configs/nezha/linux-5.4/board.dts +++ b/configs/nezha/linux-5.4/board.dts @@ -1240,26 +1240,33 @@ pull up or pull down(default 0), driver level(default 1), data> lcd_if = <4>; lcd_x = <800>; - lcd_y = <1280>; + lcd_y = <480>; lcd_width = <52>; lcd_height = <52>; - lcd_dclk_freq = <70>; + lcd_dclk_freq = <34>; lcd_pwm_used = <1>; lcd_pwm_ch = <2>; lcd_pwm_freq = <1000>; lcd_pwm_pol = <0>; lcd_pwm_max_limit = <255>; - +/* lcd_hbp = <32>; lcd_ht = <868>; lcd_hspw = <4>; lcd_vbp = <12>; - lcd_vt = <1311>; + lcd_vt = <500>; lcd_vspw = <4>; +*/ + lcd_hbp = <32>; + lcd_ht = <868>; + lcd_hspw = <4>; + lcd_vbp = <10>; + lcd_vt = <520>; + lcd_vspw = <4>; lcd_dsi_if = <0>; - lcd_dsi_lane = <4>; + lcd_dsi_lane = <1>; lcd_lvds_if = <0>; lcd_lvds_colordepth = <0>; lcd_lvds_mode = <0>;
经过芒果大佬提醒,再查看A20手册,终于把这个树莓派 MIPI DSI屏幕点亮了。
-
-
按照晕哥的修改方法就可以显示。贴一下我暂时用的参数:
lcd_dclk_freq = <27>; lcd_hbp = <25>; lcd_ht = <871>; lcd_hspw = <14>; lcd_vbp = <40>; lcd_vt = <550>; lcd_vspw = <4>;
如果是默认的sdk 1.0.1,修改完后在uboot启动logo时会报个图片太大的错误,修改下configs目录的bootlogo.bmp就行:
bootlogo.zip -
不错噢,LVGL快速滑动的时候,CPU占用率35%,保持33FPS。
-
-
@tigger 这流畅度可以啊
-
Qt 整起来。
-
QWS_MOUSE_PROTO=IntelliMouse:/dev/input/mice QT_QPA_FONTDIR=/usr/share/fonts/wqy-zenhei/ /usr/lib/qt/examples/widgets/widgets/calculator/calculator -platform linuxfb
-
QT 帧率咋样,O不OK
-
@bedrock 我去找到Qt测帧率的app试一试。
-
@tigger 这QT,保熟吗?
-
【极简操作】使用builroot 2021一键编译生成D1 nezha 系统镜像!
https://bbs.aw-ol.com/topic/171就是用韦老师这个 buildroot 勾选Qt5就可以了
# # Automatically generated file; DO NOT EDIT. # Buildroot -g51c4355-dirty Configuration # BR2_HAVE_DOT_CONFIG=y BR2_HOST_GCC_AT_LEAST_4_9=y BR2_HOST_GCC_AT_LEAST_5=y BR2_HOST_GCC_AT_LEAST_6=y BR2_HOST_GCC_AT_LEAST_7=y # # Target options # BR2_ARCH_IS_64=y BR2_ARCH_HAS_MMU_MANDATORY=y # BR2_arcle is not set # BR2_arceb is not set # BR2_arm is not set # BR2_armeb is not set # BR2_aarch64 is not set # BR2_aarch64_be is not set # BR2_csky is not set # BR2_i386 is not set # BR2_m68k is not set # BR2_microblazeel is not set # BR2_microblazebe is not set # BR2_mips is not set # BR2_mipsel is not set # BR2_mips64 is not set # BR2_mips64el is not set # BR2_nds32 is not set # BR2_nios2 is not set # BR2_or1k is not set # BR2_powerpc is not set # BR2_powerpc64 is not set # BR2_powerpc64le is not set BR2_riscv=y # BR2_s390x is not set # BR2_sh is not set # BR2_sparc is not set # BR2_sparc64 is not set # BR2_x86_64 is not set # BR2_xtensa is not set BR2_ARCH_HAS_TOOLCHAIN_BUILDROOT=y BR2_ARCH_NEEDS_GCC_AT_LEAST_4_8=y BR2_ARCH_NEEDS_GCC_AT_LEAST_4_9=y BR2_ARCH_NEEDS_GCC_AT_LEAST_5=y BR2_ARCH_NEEDS_GCC_AT_LEAST_6=y BR2_ARCH_NEEDS_GCC_AT_LEAST_7=y BR2_ARCH="riscv64" BR2_ENDIAN="LITTLE" BR2_GCC_TARGET_ABI="lp64d" BR2_BINFMT_SUPPORTS_SHARED=y BR2_READELF_ARCH_NAME="RISC-V" BR2_BINFMT_ELF=y BR2_RISCV_ISA_RVI=y BR2_RISCV_ISA_RVM=y BR2_RISCV_ISA_RVA=y BR2_RISCV_ISA_RVF=y BR2_RISCV_ISA_RVD=y BR2_riscv_g=y # BR2_riscv_custom is not set # BR2_RISCV_32 is not set BR2_RISCV_64=y # BR2_RISCV_ABI_LP64 is not set # BR2_RISCV_ABI_LP64F is not set BR2_RISCV_ABI_LP64D=y # # Build options # # # Commands # BR2_WGET="wget --passive-ftp -nd -t 3" BR2_SVN="svn --non-interactive" BR2_BZR="bzr" BR2_GIT="git" BR2_CVS="cvs" BR2_LOCALFILES="cp" BR2_SCP="scp" BR2_HG="hg" BR2_ZCAT="gzip -d -c" BR2_BZCAT="bzcat" BR2_XZCAT="xzcat" BR2_LZCAT="lzip -d -c" BR2_TAR_OPTIONS="" BR2_DEFCONFIG="/home/book/Buildroot/guanfang/buildroot-2021.02.1/configs/hifive_unleashed_defconfig" BR2_DL_DIR="$(TOPDIR)/dl" BR2_HOST_DIR="$(BASE_DIR)/host" # # Mirrors and Download locations # BR2_PRIMARY_SITE="" BR2_BACKUP_SITE="http://sources.buildroot.net" BR2_KERNEL_MIRROR="https://cdn.kernel.org/pub" BR2_GNU_MIRROR="http://ftpmirror.gnu.org" BR2_LUAROCKS_MIRROR="http://rocks.moonscript.org" BR2_CPAN_MIRROR="http://cpan.metacpan.org" BR2_JLEVEL=0 # BR2_CCACHE is not set # BR2_ENABLE_DEBUG is not set BR2_STRIP_strip=y BR2_STRIP_EXCLUDE_FILES="" BR2_STRIP_EXCLUDE_DIRS="" # BR2_OPTIMIZE_0 is not set # BR2_OPTIMIZE_1 is not set # BR2_OPTIMIZE_2 is not set # BR2_OPTIMIZE_3 is not set # BR2_OPTIMIZE_G is not set BR2_OPTIMIZE_S=y # BR2_OPTIMIZE_FAST is not set # BR2_STATIC_LIBS is not set BR2_SHARED_LIBS=y # BR2_SHARED_STATIC_LIBS is not set BR2_PACKAGE_OVERRIDE_FILE="$(CONFIG_DIR)/local.mk" BR2_GLOBAL_PATCH_DIR="" # # Advanced # BR2_COMPILER_PARANOID_UNSAFE_PATH=y # BR2_FORCE_HOST_BUILD is not set # BR2_REPRODUCIBLE is not set # BR2_PER_PACKAGE_DIRECTORIES is not set # # Security Hardening Options # # BR2_PIC_PIE is not set BR2_SSP_NONE=y # BR2_SSP_REGULAR is not set # BR2_SSP_STRONG is not set # BR2_SSP_ALL is not set BR2_RELRO_NONE=y # BR2_RELRO_PARTIAL is not set # BR2_RELRO_FULL is not set BR2_FORTIFY_SOURCE_NONE=y # BR2_FORTIFY_SOURCE_1 is not set # BR2_FORTIFY_SOURCE_2 is not set # # Toolchain # BR2_TOOLCHAIN=y BR2_TOOLCHAIN_USES_GLIBC=y # BR2_TOOLCHAIN_BUILDROOT is not set BR2_TOOLCHAIN_EXTERNAL=y # # Toolchain External Options # BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y # BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED is not set BR2_TOOLCHAIN_EXTERNAL_GLIBC=y BR2_PACKAGE_HAS_TOOLCHAIN_EXTERNAL=y BR2_PACKAGE_PROVIDES_TOOLCHAIN_EXTERNAL="toolchain-external-custom" BR2_TOOLCHAIN_EXTERNAL_PREFIX="$(ARCH)-unknown-linux-gnu" BR2_TOOLCHAIN_EXTERNAL_URL="https://weidongshan.coding.net/p/Tina-D1/d/Toolchain/git/raw/master/riscv64-glibc-gcc-thead_20200702.tar.xz" BR2_TOOLCHAIN_EXTERNAL_REL_BIN_PATH="bin" BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="$(ARCH)-unknown-linux-gnu" # BR2_TOOLCHAIN_EXTERNAL_GCC_10 is not set # BR2_TOOLCHAIN_EXTERNAL_GCC_9 is not set BR2_TOOLCHAIN_EXTERNAL_GCC_8=y # BR2_TOOLCHAIN_EXTERNAL_GCC_7 is not set # BR2_TOOLCHAIN_EXTERNAL_GCC_6 is not set # BR2_TOOLCHAIN_EXTERNAL_GCC_5 is not set # BR2_TOOLCHAIN_EXTERNAL_GCC_4_9 is not set # BR2_TOOLCHAIN_EXTERNAL_GCC_4_8 is not set # BR2_TOOLCHAIN_EXTERNAL_GCC_4_7 is not set # BR2_TOOLCHAIN_EXTERNAL_GCC_4_6 is not set # BR2_TOOLCHAIN_EXTERNAL_GCC_4_5 is not set # BR2_TOOLCHAIN_EXTERNAL_GCC_4_4 is not set # BR2_TOOLCHAIN_EXTERNAL_GCC_4_3 is not set # BR2_TOOLCHAIN_EXTERNAL_GCC_OLD is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_10 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_9 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_8 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_7 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_6 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_5 is not set BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_4=y # BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_3 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_2 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_1 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_0 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_20 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_19 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_18 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_17 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_16 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_15 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_14 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_13 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_12 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_11 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_10 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_9 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_8 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_7 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_6 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_5 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_4 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_3 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_2 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_1 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_0 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_19 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_18 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_17 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_16 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_15 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_14 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_13 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_12 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_11 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_9 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_8 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_7 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_6 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_5 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_4 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_3 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_2 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_1 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_0 is not set # BR2_TOOLCHAIN_EXTERNAL_HEADERS_REALLY_OLD is not set # BR2_TOOLCHAIN_EXTERNAL_CUSTOM_UCLIBC is not set BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y # BR2_TOOLCHAIN_EXTERNAL_CUSTOM_MUSL is not set BR2_TOOLCHAIN_EXTERNAL_HAS_SSP=y BR2_TOOLCHAIN_EXTERNAL_HAS_SSP_STRONG=y BR2_TOOLCHAIN_EXTERNAL_INET_RPC=y BR2_TOOLCHAIN_EXTERNAL_CXX=y # BR2_TOOLCHAIN_EXTERNAL_DLANG is not set BR2_TOOLCHAIN_EXTERNAL_FORTRAN=y BR2_TOOLCHAIN_EXTERNAL_OPENMP=y # BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY is not set # # Toolchain Generic Options # BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS=y BR2_TOOLCHAIN_SUPPORTS_VARIADIC_MI_THUNK=y BR2_TOOLCHAIN_HAS_NATIVE_RPC=y BR2_USE_WCHAR=y BR2_ENABLE_LOCALE=y BR2_INSTALL_LIBSTDCPP=y BR2_TOOLCHAIN_HAS_FORTRAN=y BR2_TOOLCHAIN_HAS_THREADS=y BR2_TOOLCHAIN_HAS_THREADS_DEBUG=y BR2_TOOLCHAIN_HAS_THREADS_NPTL=y BR2_TOOLCHAIN_HAS_SSP=y BR2_TOOLCHAIN_HAS_SSP_STRONG=y BR2_TOOLCHAIN_HAS_UCONTEXT=y BR2_TOOLCHAIN_HAS_OPENMP=y BR2_TOOLCHAIN_SUPPORTS_PIE=y # BR2_TOOLCHAIN_GLIBC_GCONV_LIBS_COPY is not set BR2_TOOLCHAIN_EXTRA_LIBS="lib64xthead lib64vxthead" BR2_TOOLCHAIN_HAS_FULL_GETTEXT=y BR2_USE_MMU=y BR2_TARGET_OPTIMIZATION="-Os -pipe -mcmodel=medany -mabi=lp64d -march=rv64gcxthead" BR2_TARGET_LDFLAGS="" # BR2_ECLIPSE_REGISTER is not set BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_1=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_3=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_4=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_5=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_6=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_7=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_8=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_9=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_11=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_12=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_13=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_14=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_15=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_16=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_17=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_18=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_19=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_0=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_1=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_2=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_3=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_4=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_5=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_6=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_7=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_8=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_9=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_10=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_11=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_12=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_13=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_14=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_15=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_16=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_17=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_18=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_19=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_20=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_0=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_1=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_2=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_3=y BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4=y BR2_TOOLCHAIN_HEADERS_AT_LEAST="5.4" BR2_TOOLCHAIN_GCC_AT_LEAST_4_3=y BR2_TOOLCHAIN_GCC_AT_LEAST_4_4=y BR2_TOOLCHAIN_GCC_AT_LEAST_4_5=y BR2_TOOLCHAIN_GCC_AT_LEAST_4_6=y BR2_TOOLCHAIN_GCC_AT_LEAST_4_7=y BR2_TOOLCHAIN_GCC_AT_LEAST_4_8=y BR2_TOOLCHAIN_GCC_AT_LEAST_4_9=y BR2_TOOLCHAIN_GCC_AT_LEAST_5=y BR2_TOOLCHAIN_GCC_AT_LEAST_6=y BR2_TOOLCHAIN_GCC_AT_LEAST_7=y BR2_TOOLCHAIN_GCC_AT_LEAST_8=y BR2_TOOLCHAIN_GCC_AT_LEAST="8" BR2_TOOLCHAIN_HAS_MNAN_OPTION=y BR2_TOOLCHAIN_HAS_SYNC_1=y BR2_TOOLCHAIN_HAS_SYNC_2=y BR2_TOOLCHAIN_HAS_SYNC_4=y BR2_TOOLCHAIN_HAS_SYNC_8=y BR2_TOOLCHAIN_HAS_LIBATOMIC=y BR2_TOOLCHAIN_HAS_ATOMIC=y # # System configuration # BR2_ROOTFS_SKELETON_DEFAULT=y # BR2_ROOTFS_SKELETON_CUSTOM is not set BR2_TARGET_GENERIC_HOSTNAME="buildroot" BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot" BR2_TARGET_GENERIC_PASSWD_SHA256=y # BR2_TARGET_GENERIC_PASSWD_SHA512 is not set BR2_TARGET_GENERIC_PASSWD_METHOD="sha-256" BR2_INIT_BUSYBOX=y # BR2_INIT_SYSV is not set # BR2_INIT_OPENRC is not set # BR2_INIT_SYSTEMD is not set # BR2_INIT_NONE is not set # BR2_ROOTFS_DEVICE_CREATION_STATIC is not set # BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS is not set # BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV is not set BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y BR2_ROOTFS_DEVICE_TABLE="system/device_table.txt" # BR2_ROOTFS_DEVICE_TABLE_SUPPORTS_EXTENDED_ATTRIBUTES is not set # BR2_ROOTFS_MERGED_USR is not set BR2_TARGET_ENABLE_ROOT_LOGIN=y BR2_TARGET_GENERIC_ROOT_PASSWD="" BR2_SYSTEM_BIN_SH_BUSYBOX=y # # bash, dash, mksh, zsh need BR2_PACKAGE_BUSYBOX_SHOW_OTHERS # # BR2_SYSTEM_BIN_SH_NONE is not set BR2_TARGET_GENERIC_GETTY=y BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" BR2_TARGET_GENERIC_GETTY_BAUDRATE_KEEP=y # BR2_TARGET_GENERIC_GETTY_BAUDRATE_9600 is not set # BR2_TARGET_GENERIC_GETTY_BAUDRATE_19200 is not set # BR2_TARGET_GENERIC_GETTY_BAUDRATE_38400 is not set # BR2_TARGET_GENERIC_GETTY_BAUDRATE_57600 is not set # BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200 is not set BR2_TARGET_GENERIC_GETTY_BAUDRATE="0" BR2_TARGET_GENERIC_GETTY_TERM="vt100" BR2_TARGET_GENERIC_GETTY_OPTIONS="" BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW=y BR2_SYSTEM_DHCP="eth0" BR2_SYSTEM_DEFAULT_PATH="/bin:/sbin:/usr/bin:/usr/sbin" BR2_ENABLE_LOCALE_PURGE=y BR2_ENABLE_LOCALE_WHITELIST="C en_US" BR2_GENERATE_LOCALE="" # BR2_SYSTEM_ENABLE_NLS is not set # BR2_TARGET_TZ_INFO is not set BR2_ROOTFS_USERS_TABLES="" BR2_ROOTFS_OVERLAY="" BR2_ROOTFS_POST_BUILD_SCRIPT="board/Neza/d1/post-build.sh" BR2_ROOTFS_POST_FAKEROOT_SCRIPT="" BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/Neza/d1/genimage.cfg" # # Kernel # BR2_LINUX_KERNEL=y # BR2_LINUX_KERNEL_LATEST_VERSION is not set # BR2_LINUX_KERNEL_LATEST_CIP_VERSION is not set # BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION is not set # BR2_LINUX_KERNEL_CUSTOM_VERSION is not set # BR2_LINUX_KERNEL_CUSTOM_TARBALL is not set BR2_LINUX_KERNEL_CUSTOM_GIT=y # BR2_LINUX_KERNEL_CUSTOM_HG is not set # BR2_LINUX_KERNEL_CUSTOM_SVN is not set BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://gitee.com/weidongshan/NezaD1-linuxkernel.git" BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="origin/master" BR2_LINUX_KERNEL_VERSION="origin/master" BR2_LINUX_KERNEL_PATCH="" BR2_LINUX_KERNEL_USE_DEFCONFIG=y # BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG is not set # BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG is not set BR2_LINUX_KERNEL_DEFCONFIG="sun20iw1p1_d1" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="" BR2_LINUX_KERNEL_CUSTOM_LOGO_PATH="" BR2_LINUX_KERNEL_IMAGE=y # BR2_LINUX_KERNEL_IMAGEGZ is not set # BR2_LINUX_KERNEL_VMLINUX is not set # BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM is not set BR2_LINUX_KERNEL_GZIP=y # BR2_LINUX_KERNEL_LZ4 is not set # BR2_LINUX_KERNEL_LZMA is not set # BR2_LINUX_KERNEL_LZO is not set # BR2_LINUX_KERNEL_XZ is not set # BR2_LINUX_KERNEL_ZSTD is not set BR2_LINUX_KERNEL_DTS_SUPPORT=y # BR2_LINUX_KERNEL_DTB_IS_SELF_BUILT is not set BR2_LINUX_KERNEL_INTREE_DTS_NAME="board" BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="" # BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME is not set # BR2_LINUX_KERNEL_DTB_OVERLAY_SUPPORT is not set # BR2_LINUX_KERNEL_INSTALL_TARGET is not set BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y # # Linux Kernel Extensions # # BR2_LINUX_KERNEL_EXT_RTAI is not set # BR2_LINUX_KERNEL_EXT_EV3DEV_LINUX_DRIVERS is not set # BR2_LINUX_KERNEL_EXT_FBTFT is not set # BR2_LINUX_KERNEL_EXT_AUFS is not set # # Linux Kernel Tools # # BR2_PACKAGE_LINUX_TOOLS_CPUPOWER is not set # BR2_PACKAGE_LINUX_TOOLS_GPIO is not set # BR2_PACKAGE_LINUX_TOOLS_IIO is not set # BR2_PACKAGE_LINUX_TOOLS_PCI is not set # BR2_PACKAGE_LINUX_TOOLS_PERF is not set # # selftests needs BR2_PACKAGE_BUSYBOX_SHOW_OTHERS and a toolchain w/ dynamic library # # BR2_PACKAGE_LINUX_TOOLS_TMON is not set # # Target packages # BR2_PACKAGE_BUSYBOX=y BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox.config" BR2_PACKAGE_BUSYBOX_CONFIG_FRAGMENT_FILES="" # BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set # BR2_PACKAGE_BUSYBOX_INDIVIDUAL_BINARIES is not set # BR2_PACKAGE_BUSYBOX_WATCHDOG is not set BR2_PACKAGE_SKELETON=y BR2_PACKAGE_HAS_SKELETON=y BR2_PACKAGE_PROVIDES_SKELETON="skeleton-init-sysv" BR2_PACKAGE_SKELETON_INIT_COMMON=y BR2_PACKAGE_SKELETON_INIT_SYSV=y # # Audio and video applications # # BR2_PACKAGE_ALSA_UTILS is not set # BR2_PACKAGE_ATEST is not set # BR2_PACKAGE_AUMIX is not set # BR2_PACKAGE_BLUEZ_ALSA is not set # BR2_PACKAGE_DVBLAST is not set # BR2_PACKAGE_DVDAUTHOR is not set # BR2_PACKAGE_DVDRW_TOOLS is not set # BR2_PACKAGE_ESPEAK is not set # BR2_PACKAGE_FAAD2 is not set BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS=y # BR2_PACKAGE_FFMPEG is not set # BR2_PACKAGE_FLAC is not set # BR2_PACKAGE_FLITE is not set # BR2_PACKAGE_FLUID_SOUNDFONT is not set # BR2_PACKAGE_FLUIDSYNTH is not set # BR2_PACKAGE_GMRENDER_RESURRECT is not set # BR2_PACKAGE_GSTREAMER1 is not set # BR2_PACKAGE_JACK1 is not set # BR2_PACKAGE_JACK2 is not set BR2_PACKAGE_KODI_ARCH_SUPPORTS=y # # kodi needs python w/ .py modules, a uClibc or glibc toolchain w/ C++, threads, wchar, dynamic library, gcc >= 4.8 # # # kodi needs an OpenGL EGL backend with OpenGL support # # BR2_PACKAGE_LAME is not set # BR2_PACKAGE_MADPLAY is not set # BR2_PACKAGE_MIMIC is not set # BR2_PACKAGE_MINIMODEM is not set # # miraclecast needs systemd and a glibc toolchain w/ threads and wchar # # BR2_PACKAGE_MJPEGTOOLS is not set # BR2_PACKAGE_MODPLUGTOOLS is not set # BR2_PACKAGE_MOTION is not set # BR2_PACKAGE_MPD is not set # BR2_PACKAGE_MPD_MPC is not set # BR2_PACKAGE_MPG123 is not set # BR2_PACKAGE_MPV is not set # BR2_PACKAGE_MULTICAT is not set # BR2_PACKAGE_MUSEPACK is not set # BR2_PACKAGE_NCMPC is not set # BR2_PACKAGE_OPUS_TOOLS is not set BR2_PACKAGE_PULSEAUDIO_HAS_ATOMIC=y # BR2_PACKAGE_PULSEAUDIO is not set # BR2_PACKAGE_SOX is not set # BR2_PACKAGE_SQUEEZELITE is not set # BR2_PACKAGE_TSTOOLS is not set # BR2_PACKAGE_TWOLAME is not set # BR2_PACKAGE_UDPXY is not set # BR2_PACKAGE_UPMPDCLI is not set # BR2_PACKAGE_V4L2GRAB is not set # BR2_PACKAGE_V4L2LOOPBACK is not set # BR2_PACKAGE_VLC is not set # BR2_PACKAGE_VORBIS_TOOLS is not set # BR2_PACKAGE_WAVPACK is not set # BR2_PACKAGE_YAVTA is not set # BR2_PACKAGE_YMPD is not set # # Compressors and decompressors # # BR2_PACKAGE_BROTLI is not set # BR2_PACKAGE_BZIP2 is not set # BR2_PACKAGE_LRZIP is not set # BR2_PACKAGE_LZIP is not set # BR2_PACKAGE_LZOP is not set # BR2_PACKAGE_P7ZIP is not set # BR2_PACKAGE_PIGZ is not set # BR2_PACKAGE_PIXZ is not set # BR2_PACKAGE_UNRAR is not set # BR2_PACKAGE_XZ is not set # BR2_PACKAGE_ZIP is not set # BR2_PACKAGE_ZSTD is not set # # Debugging, profiling and benchmark # # BR2_PACKAGE_BABELTRACE2 is not set # BR2_PACKAGE_BLKTRACE is not set # BR2_PACKAGE_BONNIE is not set # BR2_PACKAGE_CACHE_CALIBRATOR is not set # # clinfo needs an OpenCL provider # # BR2_PACKAGE_COREMARK is not set # BR2_PACKAGE_COREMARK_PRO is not set # # dacapo needs OpenJDK # # BR2_PACKAGE_DHRYSTONE is not set # BR2_PACKAGE_DIEHARDER is not set # BR2_PACKAGE_DMALLOC is not set # BR2_PACKAGE_DROPWATCH is not set # BR2_PACKAGE_DSTAT is not set # BR2_PACKAGE_DT is not set # BR2_PACKAGE_DUMA is not set # BR2_PACKAGE_FIO is not set BR2_PACKAGE_GDB_ARCH_SUPPORTS=y # BR2_PACKAGE_GDB is not set # BR2_PACKAGE_IOZONE is not set # BR2_PACKAGE_KTAP is not set # BR2_PACKAGE_KYUA is not set # BR2_PACKAGE_LATENCYTOP is not set # BR2_PACKAGE_LMBENCH is not set BR2_PACKAGE_LTP_TESTSUITE_ARCH_SUPPORTS=y # BR2_PACKAGE_LTP_TESTSUITE is not set # BR2_PACKAGE_LTTNG_BABELTRACE is not set # BR2_PACKAGE_LTTNG_MODULES is not set # BR2_PACKAGE_LTTNG_TOOLS is not set # BR2_PACKAGE_MEMSTAT is not set # BR2_PACKAGE_NETPERF is not set # BR2_PACKAGE_NETSNIFF_NG is not set # BR2_PACKAGE_NMON is not set # BR2_PACKAGE_PAX_UTILS is not set # BR2_PACKAGE_PV is not set # BR2_PACKAGE_RAMSMP is not set # BR2_PACKAGE_RAMSPEED is not set # BR2_PACKAGE_SPIDEV_TEST is not set # BR2_PACKAGE_STRACE is not set # BR2_PACKAGE_STRESS is not set # BR2_PACKAGE_STRESS_NG is not set # # sysdig needs a glibc or uclibc toolchain w/ C++, threads, gcc >= 4.8, dynamic library, a Linux kernel, and luajit or lua 5.1 to be built # # BR2_PACKAGE_TINYMEMBENCH is not set # BR2_PACKAGE_TRACE_CMD is not set # BR2_PACKAGE_UCLIBC_NG_TEST is not set BR2_PACKAGE_VALGRIND_ARCH_SUPPORTS=y # BR2_PACKAGE_VALGRIND is not set # BR2_PACKAGE_VMTOUCH is not set # BR2_PACKAGE_WHETSTONE is not set # # Development tools # # BR2_PACKAGE_BINUTILS is not set # BR2_PACKAGE_BITWISE is not set # BR2_PACKAGE_BSDIFF is not set # BR2_PACKAGE_CHECK is not set # BR2_PACKAGE_CPPUNIT is not set # BR2_PACKAGE_CUKINIA is not set # BR2_PACKAGE_CUNIT is not set # BR2_PACKAGE_CVS is not set # BR2_PACKAGE_CXXTEST is not set # BR2_PACKAGE_FLEX is not set # BR2_PACKAGE_GETTEXT is not set BR2_PACKAGE_PROVIDES_HOST_GETTEXT="host-gettext-tiny" # BR2_PACKAGE_GIT is not set # BR2_PACKAGE_GIT_CRYPT is not set # BR2_PACKAGE_GPERF is not set # BR2_PACKAGE_JO is not set # BR2_PACKAGE_JQ is not set # BR2_PACKAGE_LIBTOOL is not set # BR2_PACKAGE_MAKE is not set # BR2_PACKAGE_PKGCONF is not set # BR2_PACKAGE_SUBVERSION is not set # BR2_PACKAGE_TREE is not set # # Filesystem and flash utilities # # BR2_PACKAGE_ABOOTIMG is not set # BR2_PACKAGE_AUFS_UTIL is not set # BR2_PACKAGE_AUTOFS is not set # BR2_PACKAGE_BTRFS_PROGS is not set # BR2_PACKAGE_CIFS_UTILS is not set # BR2_PACKAGE_CPIO is not set # BR2_PACKAGE_CRAMFS is not set # BR2_PACKAGE_CURLFTPFS is not set # BR2_PACKAGE_DAVFS2 is not set # BR2_PACKAGE_DOSFSTOOLS is not set BR2_PACKAGE_E2FSPROGS=y BR2_PACKAGE_E2FSPROGS_DEBUGFS=y BR2_PACKAGE_E2FSPROGS_E2IMAGE=y BR2_PACKAGE_E2FSPROGS_E4DEFRAG=y BR2_PACKAGE_E2FSPROGS_FSCK=y BR2_PACKAGE_E2FSPROGS_FUSE2FS=y BR2_PACKAGE_E2FSPROGS_RESIZE2FS=y # BR2_PACKAGE_E2TOOLS is not set # BR2_PACKAGE_ECRYPTFS_UTILS is not set # BR2_PACKAGE_EROFS_UTILS is not set # BR2_PACKAGE_EXFAT is not set # BR2_PACKAGE_EXFAT_UTILS is not set # BR2_PACKAGE_EXFATPROGS is not set # BR2_PACKAGE_F2FS_TOOLS is not set # BR2_PACKAGE_FLASHBENCH is not set # BR2_PACKAGE_FSCRYPTCTL is not set # BR2_PACKAGE_FUSE_OVERLAYFS is not set # BR2_PACKAGE_FWUP is not set # BR2_PACKAGE_GENEXT2FS is not set # BR2_PACKAGE_GENPART is not set # BR2_PACKAGE_GENROMFS is not set # BR2_PACKAGE_IMX_USB_LOADER is not set # BR2_PACKAGE_MMC_UTILS is not set # BR2_PACKAGE_MTD is not set # BR2_PACKAGE_MTOOLS is not set # BR2_PACKAGE_NFS_UTILS is not set # BR2_PACKAGE_NILFS_UTILS is not set # BR2_PACKAGE_NTFS_3G is not set # BR2_PACKAGE_SP_OOPS_EXTRACT is not set # BR2_PACKAGE_SQUASHFS is not set # BR2_PACKAGE_SSHFS is not set # BR2_PACKAGE_UDFTOOLS is not set # BR2_PACKAGE_UNIONFS is not set # BR2_PACKAGE_XFSPROGS is not set # # Fonts, cursors, icons, sounds and themes # # # Cursors # # BR2_PACKAGE_COMIX_CURSORS is not set # BR2_PACKAGE_OBSIDIAN_CURSORS is not set # # Fonts # # BR2_PACKAGE_BITSTREAM_VERA is not set # BR2_PACKAGE_CANTARELL is not set BR2_PACKAGE_DEJAVU=y BR2_PACKAGE_DEJAVU_MONO=y BR2_PACKAGE_DEJAVU_SANS=y BR2_PACKAGE_DEJAVU_SERIF=y BR2_PACKAGE_DEJAVU_SANS_CONDENSED=y BR2_PACKAGE_DEJAVU_SERIF_CONDENSED=y BR2_PACKAGE_FONT_AWESOME=y # BR2_PACKAGE_GHOSTSCRIPT_FONTS is not set # BR2_PACKAGE_INCONSOLATA is not set # BR2_PACKAGE_LIBERATION is not set BR2_PACKAGE_WQY_ZENHEI=y # # Icons # # BR2_PACKAGE_GOOGLE_MATERIAL_DESIGN_ICONS is not set # BR2_PACKAGE_HICOLOR_ICON_THEME is not set # # Sounds # # BR2_PACKAGE_SOUND_THEME_BOREALIS is not set # BR2_PACKAGE_SOUND_THEME_FREEDESKTOP is not set # # Themes # # # Games # # BR2_PACKAGE_ASCII_INVADERS is not set # BR2_PACKAGE_CHOCOLATE_DOOM is not set # BR2_PACKAGE_FLARE_ENGINE is not set # BR2_PACKAGE_FROTZ is not set # BR2_PACKAGE_GNUCHESS is not set # BR2_PACKAGE_LBREAKOUT2 is not set # BR2_PACKAGE_LTRIS is not set # # minetest needs X11 and an OpenGL provider # # BR2_PACKAGE_OPENTYRIAN is not set # BR2_PACKAGE_PRBOOM is not set # BR2_PACKAGE_SL is not set # # solarus needs OpenGL and a toolchain w/ C++, gcc >= 4.9, NPTL, dynamic library, and luajit or lua 5.1 # # BR2_PACKAGE_STELLA is not set # BR2_PACKAGE_XORCURSES is not set # # Graphic libraries and applications (graphic/text) # # # Graphic applications # # # cage needs udev, mesa3d w/ EGL and GLES support # # # cog needs wpewebkit and a toolchain w/ threads # # BR2_PACKAGE_FSWEBCAM is not set # BR2_PACKAGE_GHOSTSCRIPT is not set # # glmark2 needs an OpenGL or an openGL ES and EGL backend # # # glslsandbox-player needs a toolchain w/ threads and an openGL ES and EGL driver # # BR2_PACKAGE_GNUPLOT is not set # BR2_PACKAGE_JHEAD is not set # BR2_PACKAGE_LIBVA_UTILS is not set BR2_PACKAGE_NETSURF_ARCH_SUPPORTS=y # BR2_PACKAGE_NETSURF is not set # BR2_PACKAGE_PNGQUANT is not set # BR2_PACKAGE_RRDTOOL is not set # # stellarium needs Qt5 and an OpenGL provider # # BR2_PACKAGE_TESSERACT_OCR is not set # # Graphic libraries # # BR2_PACKAGE_CEGUI is not set # BR2_PACKAGE_DIRECTFB is not set BR2_PACKAGE_FB_TEST_APP=y # BR2_PACKAGE_FBDUMP is not set # BR2_PACKAGE_FBGRAB is not set # BR2_PACKAGE_FBTERM is not set # BR2_PACKAGE_FBV is not set # BR2_PACKAGE_FREERDP is not set # BR2_PACKAGE_GRAPHICSMAGICK is not set # BR2_PACKAGE_IMAGEMAGICK is not set # BR2_PACKAGE_LINUX_FUSION is not set # BR2_PACKAGE_MESA3D is not set # BR2_PACKAGE_OCRAD is not set # # ogre needs X11 and an OpenGL provider # # BR2_PACKAGE_PSPLASH is not set # BR2_PACKAGE_SDL is not set # BR2_PACKAGE_SDL2 is not set # # Other GUIs # BR2_PACKAGE_QT5=y BR2_PACKAGE_QT5BASE=y BR2_PACKAGE_QT5BASE_CUSTOM_CONF_OPTS="" BR2_PACKAGE_QT5BASE_CONFIG_FILE="" # BR2_PACKAGE_QT5BASE_EXAMPLES is not set BR2_PACKAGE_QT5BASE_NETWORK=y BR2_PACKAGE_QT5BASE_CONCURRENT=y BR2_PACKAGE_QT5BASE_SQL=y # BR2_PACKAGE_QT5BASE_MYSQL is not set # BR2_PACKAGE_QT5BASE_PSQL is not set BR2_PACKAGE_QT5BASE_SQLITE_NONE=y # BR2_PACKAGE_QT5BASE_SQLITE_QT is not set # BR2_PACKAGE_QT5BASE_SQLITE_SYSTEM is not set BR2_PACKAGE_QT5BASE_TEST=y BR2_PACKAGE_QT5BASE_XML=y BR2_PACKAGE_QT5BASE_GUI=y BR2_PACKAGE_QT5BASE_WIDGETS=y # # OpenGL support needs an OpenGL-capable backend # BR2_PACKAGE_QT5BASE_LINUXFB=y # # directfb backend available if directfb is enabled # # # X.org XCB backend available if X.org is enabled # # # eglfs backend available if OpenGL and EGL are enabled # BR2_PACKAGE_QT5BASE_DEFAULT_QPA="" BR2_PACKAGE_QT5BASE_PRINTSUPPORT=y # BR2_PACKAGE_QT5BASE_FONTCONFIG is not set # BR2_PACKAGE_QT5BASE_HARFBUZZ is not set BR2_PACKAGE_QT5BASE_GIF=y BR2_PACKAGE_QT5BASE_JPEG=y BR2_PACKAGE_QT5BASE_PNG=y BR2_PACKAGE_QT5BASE_SYSLOG=y # BR2_PACKAGE_QT5BASE_DBUS is not set # BR2_PACKAGE_QT5BASE_ICU is not set BR2_PACKAGE_QT5BASE_TSLIB=y BR2_PACKAGE_QT5CHARTS=y # BR2_PACKAGE_QT5COAP is not set # # qt5connectivity needs neard and/or bluez5_utils # # BR2_PACKAGE_QT5ENGINIO is not set # BR2_PACKAGE_QT5IMAGEFORMATS is not set # BR2_PACKAGE_QT5KNX is not set # BR2_PACKAGE_QT5LOCATION is not set BR2_PACKAGE_QT5MQTT=y # BR2_PACKAGE_QT5MULTIMEDIA is not set # BR2_PACKAGE_QT5REMOTEOBJECTS is not set # BR2_PACKAGE_QT5SENSORS is not set # BR2_PACKAGE_QT5SERIALBUS is not set BR2_PACKAGE_QT5SERIALPORT=y BR2_PACKAGE_QT5SVG=y # BR2_PACKAGE_QT5TOOLS is not set # # qt5wayland needs an OpenGL-capable backend # # BR2_PACKAGE_QT5WEBCHANNEL is not set BR2_PACKAGE_QT5WEBSOCKETS=y # # qt5webview needs qt5webengine module # BR2_PACKAGE_QT5XMLPATTERNS=y # # QT libraries and helper libraries # # BR2_PACKAGE_CUTELYST is not set # BR2_PACKAGE_KF5 is not set BR2_PACKAGE_QEXTSERIALPORT=y BR2_PACKAGE_QJSON=y # BR2_PACKAGE_QUAZIP is not set BR2_PACKAGE_QWT=y # BR2_PACKAGE_QWT_SVG is not set # BR2_PACKAGE_QWT_MATHML is not set # BR2_PACKAGE_TEKUI is not set # BR2_PACKAGE_WESTON is not set # BR2_PACKAGE_XORG7 is not set # BR2_PACKAGE_APITRACE is not set # # vte needs an OpenGL or an OpenGL-EGL/wayland backend # # BR2_PACKAGE_XKEYBOARD_CONFIG is not set # # Hardware handling # # # Firmware # # BR2_PACKAGE_ARMBIAN_FIRMWARE is not set # BR2_PACKAGE_B43_FIRMWARE is not set # BR2_PACKAGE_LINUX_FIRMWARE is not set # BR2_PACKAGE_MURATA_CYW_FW is not set # BR2_PACKAGE_ODROIDC2_FIRMWARE is not set # BR2_PACKAGE_QCOM_DB410C_FIRMWARE is not set # BR2_PACKAGE_RCW_SMARC_SAL28 is not set # BR2_PACKAGE_UX500_FIRMWARE is not set # BR2_PACKAGE_WILC1000_FIRMWARE is not set # BR2_PACKAGE_WILINK_BT_FIRMWARE is not set # BR2_PACKAGE_ZD1211_FIRMWARE is not set # BR2_PACKAGE_18XX_TI_UTILS is not set # BR2_PACKAGE_ACPICA is not set # BR2_PACKAGE_ACPID is not set # BR2_PACKAGE_ACPITOOL is not set # BR2_PACKAGE_AER_INJECT is not set # BR2_PACKAGE_ALTERA_STAPL is not set # BR2_PACKAGE_APCUPSD is not set # BR2_PACKAGE_AVRDUDE is not set # BR2_PACKAGE_BCACHE_TOOLS is not set # BR2_PACKAGE_BRICKD is not set # BR2_PACKAGE_BRLTTY is not set # BR2_PACKAGE_CC_TOOL is not set # BR2_PACKAGE_CDRKIT is not set # BR2_PACKAGE_CRYPTSETUP is not set # BR2_PACKAGE_CWIID is not set # BR2_PACKAGE_DAHDI_LINUX is not set # BR2_PACKAGE_DAHDI_TOOLS is not set # BR2_PACKAGE_DBUS is not set # BR2_PACKAGE_DFU_UTIL is not set # BR2_PACKAGE_DMRAID is not set # BR2_PACKAGE_DT_UTILS is not set # BR2_PACKAGE_DTV_SCAN_TABLES is not set # BR2_PACKAGE_DUMP1090 is not set # BR2_PACKAGE_DVB_APPS is not set # BR2_PACKAGE_DVBSNOOP is not set # BR2_PACKAGE_EDID_DECODE is not set # # edid-decode needs a toolchain w/ C++, gcc >= 4.7 # BR2_PACKAGE_EUDEV=y BR2_PACKAGE_PROVIDES_UDEV="eudev" # BR2_PACKAGE_EUDEV_RULES_GEN is not set BR2_PACKAGE_EUDEV_ENABLE_HWDB=y # BR2_PACKAGE_EVEMU is not set BR2_PACKAGE_EVTEST=y # BR2_PACKAGE_FAN_CTRL is not set # BR2_PACKAGE_FCONFIG is not set BR2_PACKAGE_FLASHROM_ARCH_SUPPORTS=y # BR2_PACKAGE_FLASHROM is not set # BR2_PACKAGE_FMTOOLS is not set # BR2_PACKAGE_FXLOAD is not set # BR2_PACKAGE_GPM is not set # BR2_PACKAGE_GPSD is not set # BR2_PACKAGE_GPTFDISK is not set # BR2_PACKAGE_GVFS is not set # BR2_PACKAGE_HWDATA is not set # BR2_PACKAGE_HWLOC is not set # BR2_PACKAGE_INPUT_EVENT_DAEMON is not set # BR2_PACKAGE_IOSTAT is not set # BR2_PACKAGE_IPMITOOL is not set # BR2_PACKAGE_IRDA_UTILS is not set # BR2_PACKAGE_KBD is not set # BR2_PACKAGE_LCDPROC is not set # BR2_PACKAGE_LIBIEC61850 is not set # BR2_PACKAGE_LIBUBOOTENV is not set # BR2_PACKAGE_LIBUIO is not set # BR2_PACKAGE_LINUX_BACKPORTS is not set # BR2_PACKAGE_LINUX_SERIAL_TEST is not set # BR2_PACKAGE_LINUXCONSOLETOOLS is not set # BR2_PACKAGE_LIRC_TOOLS is not set # BR2_PACKAGE_LM_SENSORS is not set # BR2_PACKAGE_LSHW is not set # BR2_PACKAGE_LSSCSI is not set # BR2_PACKAGE_LSUIO is not set # BR2_PACKAGE_LUKSMETA is not set # BR2_PACKAGE_LVM2 is not set # BR2_PACKAGE_MBPFAN is not set # BR2_PACKAGE_MDADM is not set # BR2_PACKAGE_MDEVD is not set # BR2_PACKAGE_MEMTESTER is not set # BR2_PACKAGE_MEMTOOL is not set # BR2_PACKAGE_MINICOM is not set # BR2_PACKAGE_NANOCOM is not set # BR2_PACKAGE_NEARD is not set # BR2_PACKAGE_NVIDIA_MODPROBE is not set # BR2_PACKAGE_NVME is not set # BR2_PACKAGE_OFONO is not set # BR2_PACKAGE_OPEN2300 is not set # BR2_PACKAGE_OPENFPGALOADER is not set # BR2_PACKAGE_OPENIPMI is not set # BR2_PACKAGE_OPENOCD is not set # BR2_PACKAGE_PARTED is not set # BR2_PACKAGE_PCIUTILS is not set # BR2_PACKAGE_PDBG is not set # BR2_PACKAGE_PICOCOM is not set # BR2_PACKAGE_POWERTOP is not set # BR2_PACKAGE_PPS_TOOLS is not set # BR2_PACKAGE_PULSEVIEW is not set # BR2_PACKAGE_RASPI_GPIO is not set # BR2_PACKAGE_READ_EDID is not set # BR2_PACKAGE_RNG_TOOLS is not set # BR2_PACKAGE_RS485CONF is not set # BR2_PACKAGE_RTC_TOOLS is not set # BR2_PACKAGE_RTL8188EU is not set # BR2_PACKAGE_RTL8189FS is not set # BR2_PACKAGE_RTL8723BS is not set # BR2_PACKAGE_RTL8723BU is not set # BR2_PACKAGE_RTL8821AU is not set # BR2_PACKAGE_SANE_BACKENDS is not set # BR2_PACKAGE_SDPARM is not set # BR2_PACKAGE_SETSERIAL is not set # BR2_PACKAGE_SG3_UTILS is not set # BR2_PACKAGE_SIGROK_CLI is not set # BR2_PACKAGE_SISPMCTL is not set # BR2_PACKAGE_SMARTMONTOOLS is not set # BR2_PACKAGE_SMSTOOLS3 is not set # BR2_PACKAGE_SPI_TOOLS is not set # BR2_PACKAGE_SREDIRD is not set # BR2_PACKAGE_STATSERIAL is not set # BR2_PACKAGE_STM32FLASH is not set # BR2_PACKAGE_SYSSTAT is not set # # targetcli-fb depends on Python # # # ti-sgx-um needs the ti-sgx-km driver # # BR2_PACKAGE_TI_UIM is not set # BR2_PACKAGE_TI_UTILS is not set # BR2_PACKAGE_TIO is not set # BR2_PACKAGE_TRIGGERHAPPY is not set # BR2_PACKAGE_UBOOT_TOOLS is not set # BR2_PACKAGE_UBUS is not set # BR2_PACKAGE_UCCP420WLAN is not set BR2_PACKAGE_HAS_UDEV=y # BR2_PACKAGE_UDISKS is not set # BR2_PACKAGE_UHUBCTL is not set # BR2_PACKAGE_UMTPRD is not set # BR2_PACKAGE_UPOWER is not set # BR2_PACKAGE_USB_MODESWITCH is not set # BR2_PACKAGE_USB_MODESWITCH_DATA is not set # BR2_PACKAGE_USBMOUNT is not set # BR2_PACKAGE_USBUTILS is not set # BR2_PACKAGE_W_SCAN is not set # BR2_PACKAGE_WIPE is not set # BR2_PACKAGE_XORRISO is not set # BR2_PACKAGE_XR819_XRADIO is not set # # Interpreter languages and scripting # # BR2_PACKAGE_4TH is not set # BR2_PACKAGE_ENSCRIPT is not set BR2_PACKAGE_HOST_ERLANG_ARCH_SUPPORTS=y # BR2_PACKAGE_EXECLINE is not set # BR2_PACKAGE_FICL is not set # BR2_PACKAGE_HASERL is not set # BR2_PACKAGE_JIMTCL is not set BR2_PACKAGE_LUA=y BR2_PACKAGE_PROVIDES_LUAINTERPRETER="lua" # BR2_PACKAGE_LUA_5_1 is not set # BR2_PACKAGE_LUA_5_3 is not set BR2_PACKAGE_LUA_5_4=y # BR2_PACKAGE_LUA_32BITS is not set # BR2_PACKAGE_LUA_EDITING_NONE is not set # BR2_PACKAGE_LUA_READLINE is not set BR2_PACKAGE_LUA_LINENOISE=y BR2_PACKAGE_HAS_LUAINTERPRETER=y BR2_PACKAGE_LUAINTERPRETER_ABI_VERSION="5.4" BR2_PACKAGE_LUAINTERPRETER_ABI_VERSION_5_4=y BR2_PACKAGE_PROVIDES_HOST_LUAINTERPRETER="host-lua" # # Lua libraries/modules # # BR2_PACKAGE_ARGPARSE is not set # BR2_PACKAGE_CGILUA is not set # BR2_PACKAGE_COPAS is not set # BR2_PACKAGE_COXPCALL is not set # BR2_PACKAGE_DADO is not set # # easydbus needs a toolchain w/ wchar, threads, Lua <= 5.3 # # BR2_PACKAGE_LBASE64 is not set # # ljlinenoise needs LuaJIT # # # ljsyscall needs LuaJIT # # BR2_PACKAGE_LPEG is not set # BR2_PACKAGE_LPTY is not set # BR2_PACKAGE_LRANDOM is not set # BR2_PACKAGE_LSQLITE3 is not set # BR2_PACKAGE_LUA_BASEXX is not set # BR2_PACKAGE_LUA_BINARYHEAP is not set # BR2_PACKAGE_LUA_BIT32 is not set # BR2_PACKAGE_LUA_CJSON is not set # BR2_PACKAGE_LUA_COAT is not set # # lua-coatpersistent needs lsqlite3 or luasql-sqlite3 # # BR2_PACKAGE_LUA_CODEGEN is not set # BR2_PACKAGE_LUA_CQUEUES is not set # BR2_PACKAGE_LUA_CSNAPPY is not set # BR2_PACKAGE_LUA_CURL is not set # BR2_PACKAGE_LUA_DATAFILE is not set # BR2_PACKAGE_LUA_EV is not set # BR2_PACKAGE_LUA_FIFO is not set # # lua-flu needs a toolchain w/ threads, dynamic library, Lua <= 5.3 # # BR2_PACKAGE_LUA_GD is not set # BR2_PACKAGE_LUA_HTTP is not set # BR2_PACKAGE_LUA_ICONV is not set # BR2_PACKAGE_LUA_LIVR is not set # BR2_PACKAGE_LUA_LIVR_EXTRA is not set # BR2_PACKAGE_LUA_LPEG_PATTERNS is not set # BR2_PACKAGE_LUA_LUNITX is not set # BR2_PACKAGE_LUA_LYAML is not set # BR2_PACKAGE_LUA_MARKDOWN is not set # BR2_PACKAGE_LUA_MESSAGEPACK is not set # # lua-msgpack-native needs Lua 5.1 or LuaJIT # # BR2_PACKAGE_LUA_PERIPHERY is not set # BR2_PACKAGE_LUA_RESTY_HTTP is not set # BR2_PACKAGE_LUA_ROTAS is not set # BR2_PACKAGE_LUA_SAILOR is not set # # lua-sdl2 needs a toolchain w/ dynamic library, Lua <= 5.3 # # BR2_PACKAGE_LUA_SILVA is not set # BR2_PACKAGE_LUA_STD_DEBUG is not set # BR2_PACKAGE_LUA_STD_NORMALIZE is not set # BR2_PACKAGE_LUA_STDLIB is not set # BR2_PACKAGE_LUA_TESTMORE is not set # BR2_PACKAGE_LUA_UTF8 is not set # BR2_PACKAGE_LUA_VALUA is not set # # luabitop needs Lua 5.1 # # BR2_PACKAGE_LUADBI is not set # BR2_PACKAGE_LUADBI_SQLITE3 is not set # BR2_PACKAGE_LUAEXPAT is not set # BR2_PACKAGE_LUAEXPATUTILS is not set # BR2_PACKAGE_LUAFILESYSTEM is not set # BR2_PACKAGE_LUAJSON is not set # # lualdap needs a toolchain w/ wchar, dynamic library, Lua <= 5.3 # # BR2_PACKAGE_LUALOGGING is not set # BR2_PACKAGE_LUAOSSL is not set # BR2_PACKAGE_LUAPOSIX is not set # BR2_PACKAGE_LUASEC is not set # BR2_PACKAGE_LUASOCKET is not set # BR2_PACKAGE_LUASQL_SQLITE3 is not set # BR2_PACKAGE_LUASYSLOG is not set # BR2_PACKAGE_LUTOK is not set # # luv needs a toolchain w/ NPTL, dynamic library, Lua <= 5.3 # # # luvi needs LuaJIT # # BR2_PACKAGE_LZLIB is not set # # orbit needs a Lua 5.1 interpreter # # BR2_PACKAGE_RINGS is not set # # turbolua needs LuaJIT # # BR2_PACKAGE_WSAPI is not set # BR2_PACKAGE_WSAPI_FCGI is not set # BR2_PACKAGE_WSAPI_XAVANTE is not set # BR2_PACKAGE_XAVANTE is not set # BR2_PACKAGE_MICROPYTHON is not set BR2_PACKAGE_HOST_MONO_ARCH_SUPPORTS=y BR2_PACKAGE_HOST_OPENJDK_BIN_ARCH_SUPPORTS=y # BR2_PACKAGE_PERL is not set # BR2_PACKAGE_PHP is not set # BR2_PACKAGE_PYTHON is not set # BR2_PACKAGE_PYTHON3 is not set # BR2_PACKAGE_QUICKJS is not set # BR2_PACKAGE_RUBY is not set # BR2_PACKAGE_TCL is not set # # Libraries # # # Audio/Sound # # BR2_PACKAGE_ALSA_LIB is not set # BR2_PACKAGE_ALURE is not set # BR2_PACKAGE_AUBIO is not set # BR2_PACKAGE_BCG729 is not set # BR2_PACKAGE_CAPS is not set # BR2_PACKAGE_LIBAO is not set # BR2_PACKAGE_LIBASPLIB is not set # BR2_PACKAGE_LIBBROADVOICE is not set # BR2_PACKAGE_LIBCDAUDIO is not set # BR2_PACKAGE_LIBCDDB is not set # BR2_PACKAGE_LIBCDIO is not set # BR2_PACKAGE_LIBCDIO_PARANOIA is not set # BR2_PACKAGE_LIBCODEC2 is not set # BR2_PACKAGE_LIBCUE is not set # BR2_PACKAGE_LIBCUEFILE is not set # BR2_PACKAGE_LIBEBUR128 is not set # BR2_PACKAGE_LIBG7221 is not set # BR2_PACKAGE_LIBGSM is not set # BR2_PACKAGE_LIBID3TAG is not set # BR2_PACKAGE_LIBILBC is not set # BR2_PACKAGE_LIBLO is not set # BR2_PACKAGE_LIBMAD is not set # BR2_PACKAGE_LIBMODPLUG is not set # BR2_PACKAGE_LIBMPD is not set # BR2_PACKAGE_LIBMPDCLIENT is not set # BR2_PACKAGE_LIBREPLAYGAIN is not set # BR2_PACKAGE_LIBSAMPLERATE is not set # BR2_PACKAGE_LIBSIDPLAY2 is not set # BR2_PACKAGE_LIBSILK is not set # BR2_PACKAGE_LIBSNDFILE is not set # BR2_PACKAGE_LIBSOUNDTOUCH is not set # BR2_PACKAGE_LIBSOXR is not set # BR2_PACKAGE_LIBVORBIS is not set # BR2_PACKAGE_MP4V2 is not set BR2_PACKAGE_OPENAL_ARCH_SUPPORTS=y # BR2_PACKAGE_OPENAL is not set # BR2_PACKAGE_OPENCORE_AMR is not set # BR2_PACKAGE_OPUS is not set # BR2_PACKAGE_OPUSFILE is not set # BR2_PACKAGE_PORTAUDIO is not set # BR2_PACKAGE_SBC is not set # BR2_PACKAGE_SPANDSP is not set # BR2_PACKAGE_SPEEX is not set # BR2_PACKAGE_SPEEXDSP is not set # BR2_PACKAGE_TAGLIB is not set # BR2_PACKAGE_TINYALSA is not set # BR2_PACKAGE_TREMOR is not set # BR2_PACKAGE_VO_AACENC is not set # # Compression and decompression # # BR2_PACKAGE_LIBARCHIVE is not set # BR2_PACKAGE_LIBMSPACK is not set # BR2_PACKAGE_LIBSQUISH is not set # BR2_PACKAGE_LIBZIP is not set # BR2_PACKAGE_LZ4 is not set # BR2_PACKAGE_LZO is not set # BR2_PACKAGE_MINIZIP is not set # BR2_PACKAGE_SNAPPY is not set # BR2_PACKAGE_SZIP is not set BR2_PACKAGE_ZLIB=y BR2_PACKAGE_LIBZLIB=y BR2_PACKAGE_HAS_ZLIB=y BR2_PACKAGE_PROVIDES_ZLIB="libzlib" BR2_PACKAGE_PROVIDES_HOST_ZLIB="host-libzlib" # BR2_PACKAGE_ZZIPLIB is not set # # Crypto # # BR2_PACKAGE_BEARSSL is not set # BR2_PACKAGE_BEECRYPT is not set BR2_PACKAGE_BOTAN_ARCH_SUPPORTS=y # BR2_PACKAGE_BOTAN is not set # BR2_PACKAGE_CA_CERTIFICATES is not set # BR2_PACKAGE_CRYPTODEV is not set # BR2_PACKAGE_GCR is not set # BR2_PACKAGE_GNUTLS is not set # BR2_PACKAGE_LIBARGON2 is not set # BR2_PACKAGE_LIBASSUAN is not set # BR2_PACKAGE_LIBGCRYPT is not set BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS=y # BR2_PACKAGE_LIBGPG_ERROR is not set BR2_PACKAGE_LIBGPG_ERROR_SYSCFG="riscv64-unknown-linux-gnu" # BR2_PACKAGE_LIBGPGME is not set # BR2_PACKAGE_LIBKCAPI is not set # BR2_PACKAGE_LIBKSBA is not set # BR2_PACKAGE_LIBMCRYPT is not set # BR2_PACKAGE_LIBMHASH is not set # BR2_PACKAGE_LIBNSS is not set # BR2_PACKAGE_LIBOLM is not set # BR2_PACKAGE_LIBP11 is not set # BR2_PACKAGE_LIBSCRYPT is not set # BR2_PACKAGE_LIBSECRET is not set # BR2_PACKAGE_LIBSHA1 is not set # BR2_PACKAGE_LIBSODIUM is not set # BR2_PACKAGE_LIBSSH is not set # BR2_PACKAGE_LIBSSH2 is not set # BR2_PACKAGE_LIBTOMCRYPT is not set # BR2_PACKAGE_LIBUECC is not set # BR2_PACKAGE_MBEDTLS is not set # BR2_PACKAGE_NETTLE is not set BR2_PACKAGE_LIBOPENSSL_ARCH_SUPPORTS=y # BR2_PACKAGE_OPENSSL is not set BR2_PACKAGE_PROVIDES_HOST_OPENSSL="host-libopenssl" # BR2_PACKAGE_PKCS11_HELPER is not set # BR2_PACKAGE_RHASH is not set # BR2_PACKAGE_TINYDTLS is not set # BR2_PACKAGE_TPM2_PKCS11 is not set # BR2_PACKAGE_TPM2_TSS is not set # BR2_PACKAGE_TROUSERS is not set # BR2_PACKAGE_USTREAM_SSL is not set # BR2_PACKAGE_WOLFSSL is not set # # Database # # BR2_PACKAGE_BERKELEYDB is not set # BR2_PACKAGE_GDBM is not set # BR2_PACKAGE_HIREDIS is not set # BR2_PACKAGE_KOMPEXSQLITE is not set # BR2_PACKAGE_LEVELDB is not set # BR2_PACKAGE_LIBGIT2 is not set # BR2_PACKAGE_LIBMDBX is not set # BR2_PACKAGE_LIBODB is not set # BR2_PACKAGE_MYSQL is not set # BR2_PACKAGE_POSTGRESQL is not set # BR2_PACKAGE_REDIS is not set # BR2_PACKAGE_ROCKSDB is not set # BR2_PACKAGE_SQLCIPHER is not set # BR2_PACKAGE_SQLITE is not set # BR2_PACKAGE_UNIXODBC is not set # # Filesystem # # BR2_PACKAGE_GAMIN is not set # BR2_PACKAGE_LIBCONFIG is not set # BR2_PACKAGE_LIBCONFUSE is not set BR2_PACKAGE_LIBFUSE=y # BR2_PACKAGE_LIBFUSE3 is not set # BR2_PACKAGE_LIBLOCKFILE is not set # BR2_PACKAGE_LIBNFS is not set # BR2_PACKAGE_LIBSYSFS is not set # BR2_PACKAGE_LOCKDEV is not set # BR2_PACKAGE_PHYSFS is not set # # Graphics # # BR2_PACKAGE_ASSIMP is not set # # at-spi2-atk depends on X.org # # # at-spi2-core depends on X.org # # BR2_PACKAGE_ATK is not set # BR2_PACKAGE_ATKMM is not set # BR2_PACKAGE_BULLET is not set # BR2_PACKAGE_CAIRO is not set # BR2_PACKAGE_CAIROMM is not set # # chipmunk needs an OpenGL backend # # BR2_PACKAGE_EXEMPI is not set # BR2_PACKAGE_EXIV2 is not set # BR2_PACKAGE_FONTCONFIG is not set BR2_PACKAGE_FREETYPE=y # BR2_PACKAGE_GD is not set # BR2_PACKAGE_GDK_PIXBUF is not set # BR2_PACKAGE_GIFLIB is not set # # granite needs libgtk3 and a toolchain w/ wchar, threads # # BR2_PACKAGE_GRAPHITE2 is not set # # gtkmm3 needs libgtk3 and a toolchain w/ C++, wchar, threads, gcc >= 4.9 # # BR2_PACKAGE_HARFBUZZ is not set # BR2_PACKAGE_IJS is not set # BR2_PACKAGE_IMLIB2 is not set # # irrlicht needs X11 and an OpenGL provider # # BR2_PACKAGE_JASPER is not set # BR2_PACKAGE_JBIG2DEC is not set BR2_PACKAGE_JPEG=y BR2_PACKAGE_LIBJPEG=y # BR2_PACKAGE_JPEG_TURBO is not set BR2_PACKAGE_HAS_JPEG=y BR2_PACKAGE_PROVIDES_JPEG="libjpeg" # BR2_PACKAGE_KMSXX is not set # BR2_PACKAGE_LCMS2 is not set # BR2_PACKAGE_LENSFUN is not set # BR2_PACKAGE_LEPTONICA is not set # BR2_PACKAGE_LIBART is not set # BR2_PACKAGE_LIBDMTX is not set # BR2_PACKAGE_LIBDRM is not set # # libepoxy needs an OpenGL and/or OpenGL EGL backend # # BR2_PACKAGE_LIBEXIF is not set # # libfm needs X.org and a toolchain w/ wchar, threads, C++, gcc >= 4.8 # # BR2_PACKAGE_LIBFM_EXTRA is not set # # libfreeglut depends on X.org and needs an OpenGL backend # # BR2_PACKAGE_LIBFREEIMAGE is not set # BR2_PACKAGE_LIBGEOTIFF is not set # # libglew depends on X.org and needs an OpenGL backend # # # libglfw depends on X.org and needs an OpenGL backend # # # libglu needs an OpenGL backend # # BR2_PACKAGE_LIBGTA is not set # # libgtk3 needs an OpenGL or an OpenGL-EGL/wayland backend # # BR2_PACKAGE_LIBMEDIAART is not set # BR2_PACKAGE_LIBMNG is not set BR2_PACKAGE_LIBPNG=y # BR2_PACKAGE_LIBQRENCODE is not set # BR2_PACKAGE_LIBRAW is not set # # libsoil needs an OpenGL backend and a toolchain w/ dynamic library # # BR2_PACKAGE_LIBSVG is not set # BR2_PACKAGE_LIBSVG_CAIRO is not set # BR2_PACKAGE_LIBSVGTINY is not set # BR2_PACKAGE_LIBVA is not set # BR2_PACKAGE_LIBVIPS is not set # # libwpe needs a toolchain w/ C++, dynamic library and an OpenEGL-capable backend # # BR2_PACKAGE_MENU_CACHE is not set # BR2_PACKAGE_OPENCV3 is not set # BR2_PACKAGE_OPENJPEG is not set # BR2_PACKAGE_PANGO is not set # BR2_PACKAGE_PANGOMM is not set # BR2_PACKAGE_PIPEWIRE is not set # BR2_PACKAGE_PIXMAN is not set # BR2_PACKAGE_POPPLER is not set # BR2_PACKAGE_TIFF is not set # BR2_PACKAGE_WAYLAND is not set # BR2_PACKAGE_WEBP is not set # # wlroots needs udev, mesa3d w/ EGL and GLES support # # BR2_PACKAGE_WOFF2 is not set # # wpebackend-fdo needs a toolchain w/ C++, wchar, threads, dynamic library and an OpenEGL-capable Wayland backend # # BR2_PACKAGE_ZBAR is not set # BR2_PACKAGE_ZXING_CPP is not set # # Hardware handling # # BR2_PACKAGE_ACSCCID is not set # BR2_PACKAGE_C_PERIPHERY is not set # BR2_PACKAGE_CCID is not set # BR2_PACKAGE_DTC is not set # BR2_PACKAGE_HACKRF is not set # BR2_PACKAGE_HIDAPI is not set # BR2_PACKAGE_JITTERENTROPY_LIBRARY is not set # BR2_PACKAGE_LCDAPI is not set # BR2_PACKAGE_LET_ME_CREATE is not set # BR2_PACKAGE_LIBAIO is not set # BR2_PACKAGE_LIBATASMART is not set # BR2_PACKAGE_LIBBLOCKDEV is not set # BR2_PACKAGE_LIBCEC is not set # BR2_PACKAGE_LIBFREEFARE is not set # BR2_PACKAGE_LIBFTDI is not set # BR2_PACKAGE_LIBFTDI1 is not set # BR2_PACKAGE_LIBGPHOTO2 is not set # BR2_PACKAGE_LIBGPIOD is not set # BR2_PACKAGE_LIBGUDEV is not set # BR2_PACKAGE_LIBHID is not set # BR2_PACKAGE_LIBIIO is not set # BR2_PACKAGE_LIBINPUT is not set # BR2_PACKAGE_LIBIQRF is not set # BR2_PACKAGE_LIBLLCP is not set # BR2_PACKAGE_LIBMBIM is not set # BR2_PACKAGE_LIBNFC is not set # BR2_PACKAGE_LIBPCIACCESS is not set # BR2_PACKAGE_LIBPHIDGET is not set # BR2_PACKAGE_LIBPRI is not set # BR2_PACKAGE_LIBQMI is not set # BR2_PACKAGE_LIBRAW1394 is not set # BR2_PACKAGE_LIBRTLSDR is not set # BR2_PACKAGE_LIBSERIAL is not set # BR2_PACKAGE_LIBSERIALPORT is not set # BR2_PACKAGE_LIBSIGROK is not set # BR2_PACKAGE_LIBSIGROKDECODE is not set # BR2_PACKAGE_LIBSOC is not set # BR2_PACKAGE_LIBSS7 is not set # BR2_PACKAGE_LIBUSB is not set # BR2_PACKAGE_LIBUSBGX is not set # BR2_PACKAGE_LIBV4L is not set # BR2_PACKAGE_LIBXKBCOMMON is not set # BR2_PACKAGE_MTDEV is not set # BR2_PACKAGE_NEARDAL is not set # BR2_PACKAGE_OWFS is not set # BR2_PACKAGE_PCSC_LITE is not set BR2_PACKAGE_TSLIB=y # BR2_PACKAGE_UHD is not set # BR2_PACKAGE_URG is not set # # Javascript # # BR2_PACKAGE_ANGULARJS is not set # BR2_PACKAGE_BOOTSTRAP is not set # BR2_PACKAGE_CHARTJS is not set # BR2_PACKAGE_DATATABLES is not set # BR2_PACKAGE_DUKTAPE is not set # BR2_PACKAGE_EXPLORERCANVAS is not set # BR2_PACKAGE_FLOT is not set # BR2_PACKAGE_JQUERY is not set # BR2_PACKAGE_JSMIN is not set # BR2_PACKAGE_JSON_JAVASCRIPT is not set # BR2_PACKAGE_JSZIP is not set # BR2_PACKAGE_OPENLAYERS is not set # BR2_PACKAGE_POPPERJS is not set BR2_PACKAGE_SPIDERMONKEY_ARCH_SUPPORTS=y # BR2_PACKAGE_SPIDERMONKEY is not set # BR2_PACKAGE_VUEJS is not set # # JSON/XML # # BR2_PACKAGE_BENEJSON is not set # BR2_PACKAGE_CJSON is not set # BR2_PACKAGE_EXPAT is not set # BR2_PACKAGE_JANSSON is not set # BR2_PACKAGE_JOSE is not set # BR2_PACKAGE_JSMN is not set # BR2_PACKAGE_JSON_C is not set # BR2_PACKAGE_JSON_FOR_MODERN_CPP is not set # BR2_PACKAGE_JSON_GLIB is not set # BR2_PACKAGE_JSONCPP is not set # BR2_PACKAGE_LIBBSON is not set # BR2_PACKAGE_LIBFASTJSON is not set # BR2_PACKAGE_LIBJSON is not set # BR2_PACKAGE_LIBROXML is not set # BR2_PACKAGE_LIBUCL is not set # BR2_PACKAGE_LIBXML2 is not set # BR2_PACKAGE_LIBXMLPP is not set # BR2_PACKAGE_LIBXMLRPC is not set # BR2_PACKAGE_LIBXSLT is not set # BR2_PACKAGE_LIBYAML is not set # BR2_PACKAGE_MXML is not set # BR2_PACKAGE_PUGIXML is not set # BR2_PACKAGE_RAPIDJSON is not set # BR2_PACKAGE_RAPIDXML is not set # BR2_PACKAGE_RAPTOR is not set # BR2_PACKAGE_TINYXML is not set # BR2_PACKAGE_TINYXML2 is not set # BR2_PACKAGE_VALIJSON is not set # BR2_PACKAGE_XERCES is not set # BR2_PACKAGE_YAJL is not set # BR2_PACKAGE_YAML_CPP is not set # # Logging # # BR2_PACKAGE_GLOG is not set # BR2_PACKAGE_LIBLOG4C_LOCALTIME is not set # BR2_PACKAGE_LIBLOGGING is not set # BR2_PACKAGE_LOG4CPLUS is not set # BR2_PACKAGE_LOG4CPP is not set # BR2_PACKAGE_LOG4CXX is not set # BR2_PACKAGE_OPENTRACING_CPP is not set # BR2_PACKAGE_SPDLOG is not set # BR2_PACKAGE_ZLOG is not set # # Multimedia # # BR2_PACKAGE_BITSTREAM is not set # BR2_PACKAGE_DAV1D is not set # BR2_PACKAGE_KVAZAAR is not set # BR2_PACKAGE_LIBAACS is not set # BR2_PACKAGE_LIBASS is not set # BR2_PACKAGE_LIBBDPLUS is not set # BR2_PACKAGE_LIBBLURAY is not set BR2_PACKAGE_LIBCAMERA_ARCH_SUPPORTS=y # BR2_PACKAGE_LIBCAMERA is not set # BR2_PACKAGE_LIBDCADEC is not set # BR2_PACKAGE_LIBDVBCSA is not set # BR2_PACKAGE_LIBDVBPSI is not set # BR2_PACKAGE_LIBDVBSI is not set # BR2_PACKAGE_LIBDVDCSS is not set # BR2_PACKAGE_LIBDVDNAV is not set # BR2_PACKAGE_LIBDVDREAD is not set # BR2_PACKAGE_LIBEBML is not set # BR2_PACKAGE_LIBHDHOMERUN is not set # BR2_PACKAGE_LIBMATROSKA is not set # BR2_PACKAGE_LIBMMS is not set # BR2_PACKAGE_LIBMPEG2 is not set # BR2_PACKAGE_LIBOGG is not set # BR2_PACKAGE_LIBOPUSENC is not set # BR2_PACKAGE_LIBTHEORA is not set # BR2_PACKAGE_LIBUDFREAD is not set # BR2_PACKAGE_LIBVPX is not set # BR2_PACKAGE_LIBYUV is not set # BR2_PACKAGE_LIVE555 is not set # BR2_PACKAGE_MEDIASTREAMER is not set # BR2_PACKAGE_X264 is not set # BR2_PACKAGE_X265 is not set # # Networking # # BR2_PACKAGE_AGENTPP is not set # BR2_PACKAGE_AZMQ is not set # BR2_PACKAGE_AZURE_IOT_SDK_C is not set # BR2_PACKAGE_BATMAN_ADV is not set # BR2_PACKAGE_BELLE_SIP is not set # BR2_PACKAGE_C_ARES is not set # BR2_PACKAGE_CGIC is not set # BR2_PACKAGE_CPPZMQ is not set # BR2_PACKAGE_CURLPP is not set # BR2_PACKAGE_CZMQ is not set # BR2_PACKAGE_DAQ is not set # BR2_PACKAGE_DAVICI is not set # BR2_PACKAGE_ENET is not set # BR2_PACKAGE_FILEMQ is not set # BR2_PACKAGE_FLICKCURL is not set # BR2_PACKAGE_FREERADIUS_CLIENT is not set # BR2_PACKAGE_GENSIO is not set # BR2_PACKAGE_GEOIP is not set # BR2_PACKAGE_GLIB_NETWORKING is not set # BR2_PACKAGE_GRPC is not set # BR2_PACKAGE_GSSDP is not set # BR2_PACKAGE_GUPNP is not set # BR2_PACKAGE_GUPNP_AV is not set # BR2_PACKAGE_GUPNP_DLNA is not set # BR2_PACKAGE_IBRCOMMON is not set # BR2_PACKAGE_IBRDTN is not set # BR2_PACKAGE_LIBCGI is not set # BR2_PACKAGE_LIBCGICC is not set # BR2_PACKAGE_LIBCOAP is not set # BR2_PACKAGE_LIBCPPRESTSDK is not set # BR2_PACKAGE_LIBCURL is not set # BR2_PACKAGE_LIBDNET is not set # BR2_PACKAGE_LIBEXOSIP2 is not set # BR2_PACKAGE_LIBFCGI is not set # BR2_PACKAGE_LIBGSASL is not set # BR2_PACKAGE_LIBHTP is not set # BR2_PACKAGE_LIBHTTPPARSER is not set # BR2_PACKAGE_LIBHTTPSERVER is not set # BR2_PACKAGE_LIBIDN is not set # BR2_PACKAGE_LIBIDN2 is not set # BR2_PACKAGE_LIBISCSI is not set # BR2_PACKAGE_LIBKRB5 is not set # BR2_PACKAGE_LIBLDNS is not set # BR2_PACKAGE_LIBMAXMINDDB is not set # BR2_PACKAGE_LIBMBUS is not set # BR2_PACKAGE_LIBMEMCACHED is not set # BR2_PACKAGE_LIBMICROHTTPD is not set # BR2_PACKAGE_LIBMINIUPNPC is not set # BR2_PACKAGE_LIBMNL is not set # BR2_PACKAGE_LIBMODBUS is not set # BR2_PACKAGE_LIBMODSECURITY is not set # BR2_PACKAGE_LIBNATPMP is not set # BR2_PACKAGE_LIBNDP is not set # BR2_PACKAGE_LIBNET is not set # BR2_PACKAGE_LIBNETCONF2 is not set # BR2_PACKAGE_LIBNETFILTER_ACCT is not set # BR2_PACKAGE_LIBNETFILTER_CONNTRACK is not set # BR2_PACKAGE_LIBNETFILTER_CTHELPER is not set # BR2_PACKAGE_LIBNETFILTER_CTTIMEOUT is not set # BR2_PACKAGE_LIBNETFILTER_LOG is not set # BR2_PACKAGE_LIBNETFILTER_QUEUE is not set # BR2_PACKAGE_LIBNFNETLINK is not set # BR2_PACKAGE_LIBNFTNL is not set # BR2_PACKAGE_LIBNICE is not set # BR2_PACKAGE_LIBNIDS is not set # BR2_PACKAGE_LIBNL is not set # BR2_PACKAGE_LIBNPUPNP is not set # BR2_PACKAGE_LIBOAUTH is not set # BR2_PACKAGE_LIBOPING is not set # BR2_PACKAGE_LIBOSIP2 is not set # BR2_PACKAGE_LIBPAGEKITE is not set # BR2_PACKAGE_LIBPCAP is not set # BR2_PACKAGE_LIBPJSIP is not set # BR2_PACKAGE_LIBRELP is not set # BR2_PACKAGE_LIBRSYNC is not set # BR2_PACKAGE_LIBSHAIRPLAY is not set # BR2_PACKAGE_LIBSHOUT is not set # BR2_PACKAGE_LIBSOCKETCAN is not set # BR2_PACKAGE_LIBSOUP is not set # BR2_PACKAGE_LIBSRTP is not set # BR2_PACKAGE_LIBSTROPHE is not set # BR2_PACKAGE_LIBTELNET is not set # BR2_PACKAGE_LIBTIRPC is not set # BR2_PACKAGE_LIBTORRENT is not set # BR2_PACKAGE_LIBTORRENT_RASTERBAR is not set # BR2_PACKAGE_LIBUEV is not set # BR2_PACKAGE_LIBUHTTPD is not set # BR2_PACKAGE_LIBUPNP is not set # BR2_PACKAGE_LIBUPNPP is not set # BR2_PACKAGE_LIBURIPARSER is not set # BR2_PACKAGE_LIBUWSC is not set # BR2_PACKAGE_LIBVNCSERVER is not set # BR2_PACKAGE_LIBWEBSOCK is not set # BR2_PACKAGE_LIBWEBSOCKETS is not set # BR2_PACKAGE_LIBYANG is not set # BR2_PACKAGE_LKSCTP_TOOLS is not set # BR2_PACKAGE_MBUFFER is not set # BR2_PACKAGE_MONGOOSE is not set # BR2_PACKAGE_NANOMSG is not set # BR2_PACKAGE_NEON is not set # BR2_PACKAGE_NETOPEER2 is not set # BR2_PACKAGE_NGHTTP2 is not set # BR2_PACKAGE_NORM is not set # BR2_PACKAGE_NSS_MYHOSTNAME is not set # BR2_PACKAGE_NSS_PAM_LDAPD is not set # BR2_PACKAGE_OMNIORB is not set # BR2_PACKAGE_OPEN62541 is not set # BR2_PACKAGE_OPENLDAP is not set # BR2_PACKAGE_OPENMPI is not set # BR2_PACKAGE_OPENPGM is not set # BR2_PACKAGE_OPENZWAVE is not set # BR2_PACKAGE_ORTP is not set # BR2_PACKAGE_PAHO_MQTT_C is not set # BR2_PACKAGE_PAHO_MQTT_CPP is not set # BR2_PACKAGE_PISTACHE is not set # BR2_PACKAGE_QDECODER is not set # BR2_PACKAGE_QPID_PROTON is not set # BR2_PACKAGE_RABBITMQ_C is not set # BR2_PACKAGE_RESIPROCATE is not set # BR2_PACKAGE_RESTCLIENT_CPP is not set # BR2_PACKAGE_RTMPDUMP is not set # BR2_PACKAGE_SLIRP is not set # BR2_PACKAGE_SNMPPP is not set # BR2_PACKAGE_SOFIA_SIP is not set # BR2_PACKAGE_SYSREPO is not set # BR2_PACKAGE_THRIFT is not set # BR2_PACKAGE_USBREDIR is not set # BR2_PACKAGE_WAMPCC is not set # BR2_PACKAGE_WEBSOCKETPP is not set # BR2_PACKAGE_ZEROMQ is not set # BR2_PACKAGE_ZMQPP is not set # BR2_PACKAGE_ZYRE is not set # # Other # # BR2_PACKAGE_APR is not set # BR2_PACKAGE_APR_UTIL is not set # BR2_PACKAGE_ARMADILLO is not set # BR2_PACKAGE_ATF is not set # BR2_PACKAGE_AVRO_C is not set # BR2_PACKAGE_BCTOOLBOX is not set # BR2_PACKAGE_BELR is not set # BR2_PACKAGE_BOOST is not set # BR2_PACKAGE_C_CAPNPROTO is not set # BR2_PACKAGE_CAPNPROTO is not set # BR2_PACKAGE_CCTZ is not set # BR2_PACKAGE_CEREAL is not set # BR2_PACKAGE_CLAPACK is not set # BR2_PACKAGE_CMOCKA is not set # BR2_PACKAGE_CPPCMS is not set # BR2_PACKAGE_CRACKLIB is not set # BR2_PACKAGE_DAWGDIC is not set # BR2_PACKAGE_DING_LIBS is not set # BR2_PACKAGE_EIGEN is not set # BR2_PACKAGE_ELFUTILS is not set # BR2_PACKAGE_ELL is not set # BR2_PACKAGE_FFTW is not set # BR2_PACKAGE_FLANN is not set # BR2_PACKAGE_FLATBUFFERS is not set # BR2_PACKAGE_FLATCC is not set # BR2_PACKAGE_GCONF is not set # BR2_PACKAGE_GFLAGS is not set # BR2_PACKAGE_GLI is not set # BR2_PACKAGE_GLIBMM is not set # BR2_PACKAGE_GLM is not set # BR2_PACKAGE_GMP is not set BR2_PACKAGE_GOBJECT_INTROSPECTION_ARCH_SUPPORTS=y # # gobject-introspection needs python3 # # BR2_PACKAGE_GSL is not set # BR2_PACKAGE_GTEST is not set BR2_PACKAGE_JEMALLOC_ARCH_SUPPORTS=y # BR2_PACKAGE_JEMALLOC is not set # BR2_PACKAGE_LAPACK is not set BR2_PACKAGE_LIBABSEIL_CPP_ARCH_SUPPORTS=y # BR2_PACKAGE_LIBABSEIL_CPP is not set # BR2_PACKAGE_LIBARGTABLE2 is not set # BR2_PACKAGE_LIBAVL is not set # BR2_PACKAGE_LIBB64 is not set # BR2_PACKAGE_LIBBACKTRACE is not set BR2_PACKAGE_LIBBSD_ARCH_SUPPORTS=y # BR2_PACKAGE_LIBBSD is not set # BR2_PACKAGE_LIBBYTESIZE is not set # BR2_PACKAGE_LIBCAP is not set # BR2_PACKAGE_LIBCAP_NG is not set # BR2_PACKAGE_LIBCGROUP is not set # BR2_PACKAGE_LIBCORRECT is not set # BR2_PACKAGE_LIBCROSSGUID is not set # BR2_PACKAGE_LIBCSV is not set # BR2_PACKAGE_LIBDAEMON is not set # BR2_PACKAGE_LIBEE is not set # BR2_PACKAGE_LIBEV is not set # BR2_PACKAGE_LIBEVDEV is not set # BR2_PACKAGE_LIBEVENT is not set # BR2_PACKAGE_LIBFFI is not set # BR2_PACKAGE_LIBGEE is not set # BR2_PACKAGE_LIBGEOS is not set # BR2_PACKAGE_LIBGLIB2 is not set # BR2_PACKAGE_LIBGLOB is not set # BR2_PACKAGE_LIBICAL is not set # BR2_PACKAGE_LIBITE is not set # BR2_PACKAGE_LIBLINEAR is not set # BR2_PACKAGE_LIBLOKI is not set # BR2_PACKAGE_LIBNPTH is not set BR2_PACKAGE_LIBNSPR_ARCH_SUPPORT=y # BR2_PACKAGE_LIBNSPR is not set # BR2_PACKAGE_LIBPFM4 is not set # BR2_PACKAGE_LIBPLIST is not set # BR2_PACKAGE_LIBPTHREAD_STUBS is not set # BR2_PACKAGE_LIBPTHSEM is not set # BR2_PACKAGE_LIBPWQUALITY is not set # BR2_PACKAGE_LIBSIGC is not set BR2_PACKAGE_LIBSIGSEGV_ARCH_SUPPORTS=y # BR2_PACKAGE_LIBSIGSEGV is not set # BR2_PACKAGE_LIBSPATIALINDEX is not set # BR2_PACKAGE_LIBTASN1 is not set # BR2_PACKAGE_LIBTOMMATH is not set # BR2_PACKAGE_LIBTPL is not set # BR2_PACKAGE_LIBUBOX is not set # BR2_PACKAGE_LIBUCI is not set BR2_PACKAGE_LIBURCU_ARCH_SUPPORTS=y # BR2_PACKAGE_LIBURCU is not set # BR2_PACKAGE_LIBUV is not set # BR2_PACKAGE_LIGHTNING is not set # BR2_PACKAGE_LINUX_PAM is not set # BR2_PACKAGE_LIQUID_DSP is not set # BR2_PACKAGE_LTTNG_LIBUST is not set # BR2_PACKAGE_MATIO is not set # BR2_PACKAGE_MPC is not set # BR2_PACKAGE_MPDECIMAL is not set # BR2_PACKAGE_MPFR is not set # BR2_PACKAGE_MPIR is not set # BR2_PACKAGE_MSGPACK is not set # BR2_PACKAGE_ORC is not set # BR2_PACKAGE_P11_KIT is not set BR2_PACKAGE_POCO_ARCH_SUPPORTS=y # BR2_PACKAGE_POCO is not set BR2_PACKAGE_PROTOBUF_ARCH_SUPPORTS=y # BR2_PACKAGE_PROTOBUF is not set # BR2_PACKAGE_PROTOBUF_C is not set # BR2_PACKAGE_QHULL is not set # BR2_PACKAGE_QLIBC is not set # BR2_PACKAGE_RIEMANN_C_CLIENT is not set # BR2_PACKAGE_SHAPELIB is not set # BR2_PACKAGE_SKALIBS is not set # BR2_PACKAGE_SPHINXBASE is not set # BR2_PACKAGE_TINYCBOR is not set # BR2_PACKAGE_UVW is not set # BR2_PACKAGE_XAPIAN is not set # # Security # # BR2_PACKAGE_LIBAPPARMOR is not set # BR2_PACKAGE_LIBSELINUX is not set # BR2_PACKAGE_LIBSEPOL is not set # BR2_PACKAGE_SAFECLIB is not set # # Text and terminal handling # # BR2_PACKAGE_AUGEAS is not set # BR2_PACKAGE_ENCHANT is not set # BR2_PACKAGE_FMT is not set # BR2_PACKAGE_FSTRCMP is not set # BR2_PACKAGE_ICU is not set # BR2_PACKAGE_INIH is not set # BR2_PACKAGE_LIBCLI is not set # BR2_PACKAGE_LIBEDIT is not set # BR2_PACKAGE_LIBENCA is not set # BR2_PACKAGE_LIBESTR is not set # BR2_PACKAGE_LIBFRIBIDI is not set # BR2_PACKAGE_LIBUNISTRING is not set BR2_PACKAGE_LINENOISE=y # BR2_PACKAGE_NCURSES is not set # BR2_PACKAGE_NEWT is not set # BR2_PACKAGE_ONIGURUMA is not set # BR2_PACKAGE_PCRE is not set BR2_PACKAGE_PCRE2=y BR2_PACKAGE_PCRE2_16=y # BR2_PACKAGE_PCRE2_32 is not set # BR2_PACKAGE_POPT is not set # BR2_PACKAGE_RE2 is not set # BR2_PACKAGE_READLINE is not set # BR2_PACKAGE_SLANG is not set # BR2_PACKAGE_TCLAP is not set # BR2_PACKAGE_UTF8PROC is not set # # Mail # # BR2_PACKAGE_DOVECOT is not set # BR2_PACKAGE_EXIM is not set # BR2_PACKAGE_FETCHMAIL is not set # BR2_PACKAGE_HEIRLOOM_MAILX is not set # BR2_PACKAGE_LIBESMTP is not set # BR2_PACKAGE_MSMTP is not set # BR2_PACKAGE_MUTT is not set # # Miscellaneous # # BR2_PACKAGE_AESPIPE is not set # BR2_PACKAGE_BC is not set BR2_PACKAGE_BITCOIN_ARCH_SUPPORTS=y # BR2_PACKAGE_BITCOIN is not set # BR2_PACKAGE_CLAMAV is not set # BR2_PACKAGE_COLLECTD is not set # BR2_PACKAGE_COLLECTL is not set # # domoticz needs lua 5.3 and a toolchain w/ C++, gcc >= 4.8, NPTL, wchar, dynamic library # # BR2_PACKAGE_EMPTY is not set # BR2_PACKAGE_GNURADIO is not set # BR2_PACKAGE_GOOGLEFONTDIRECTORY is not set # # gqrx needs a toolchain w/ C++, threads, wchar, dynamic library # # BR2_PACKAGE_GQRX is not set # BR2_PACKAGE_GSETTINGS_DESKTOP_SCHEMAS is not set # BR2_PACKAGE_HAVEGED is not set # BR2_PACKAGE_LINUX_SYSCALL_SUPPORT is not set # BR2_PACKAGE_MCRYPT is not set # BR2_PACKAGE_MOBILE_BROADBAND_PROVIDER_INFO is not set # BR2_PACKAGE_NETDATA is not set # BR2_PACKAGE_PROJ is not set # BR2_PACKAGE_QPDF is not set # BR2_PACKAGE_SHARED_MIME_INFO is not set # BR2_PACKAGE_SUNWAIT is not set # BR2_PACKAGE_TASKD is not set # BR2_PACKAGE_XUTIL_UTIL_MACROS is not set # # Networking applications # # BR2_PACKAGE_AIRCRACK_NG is not set # BR2_PACKAGE_AOETOOLS is not set # BR2_PACKAGE_APACHE is not set # BR2_PACKAGE_ARGUS is not set # BR2_PACKAGE_ARP_SCAN is not set # BR2_PACKAGE_ARPTABLES is not set # BR2_PACKAGE_ASTERISK is not set # BR2_PACKAGE_ATFTP is not set # BR2_PACKAGE_AVAHI is not set # BR2_PACKAGE_AXEL is not set # BR2_PACKAGE_BABELD is not set # BR2_PACKAGE_BANDWIDTHD is not set # BR2_PACKAGE_BATCTL is not set # BR2_PACKAGE_BCUSDK is not set # BR2_PACKAGE_BIND is not set # BR2_PACKAGE_BIRD is not set # BR2_PACKAGE_BLUEZ5_UTILS is not set # BR2_PACKAGE_BMON is not set # BR2_PACKAGE_BOINC is not set # BR2_PACKAGE_BRCM_PATCHRAM_PLUS is not set # BR2_PACKAGE_BRIDGE_UTILS is not set # BR2_PACKAGE_BWM_NG is not set # BR2_PACKAGE_C_ICAP is not set # BR2_PACKAGE_CAN_UTILS is not set # BR2_PACKAGE_CANNELLONI is not set # BR2_PACKAGE_CASYNC is not set # BR2_PACKAGE_CHRONY is not set # BR2_PACKAGE_CIVETWEB is not set # BR2_PACKAGE_CONNMAN is not set # # connman-gtk needs libgtk3 and a glibc or uClibc toolchain w/ wchar, threads, resolver, dynamic library # # BR2_PACKAGE_CONNTRACK_TOOLS is not set # BR2_PACKAGE_CORKSCREW is not set # BR2_PACKAGE_CRDA is not set # BR2_PACKAGE_CTORRENT is not set # BR2_PACKAGE_CUPS is not set # BR2_PACKAGE_DANTE is not set # BR2_PACKAGE_DARKHTTPD is not set # BR2_PACKAGE_DEHYDRATED is not set # BR2_PACKAGE_DHCPCD is not set # BR2_PACKAGE_DHCPDUMP is not set # BR2_PACKAGE_DNSMASQ is not set # BR2_PACKAGE_DRBD_UTILS is not set # BR2_PACKAGE_DROPBEAR is not set # BR2_PACKAGE_EASYFRAMES is not set # BR2_PACKAGE_EBTABLES is not set # # ejabberd needs erlang, toolchain w/ C++ # # BR2_PACKAGE_ETHTOOL is not set # BR2_PACKAGE_FAIFA is not set # BR2_PACKAGE_FASTD is not set # BR2_PACKAGE_FCGIWRAP is not set # BR2_PACKAGE_FPING is not set # BR2_PACKAGE_FREESWITCH is not set # BR2_PACKAGE_FRR is not set # BR2_PACKAGE_GERBERA is not set # BR2_PACKAGE_GESFTPSERVER is not set # BR2_PACKAGE_GLOOX is not set # BR2_PACKAGE_GLORYTUN is not set # # gupnp-tools needs libgtk3 # # BR2_PACKAGE_HANS is not set BR2_PACKAGE_HAPROXY_ARCH_SUPPORTS=y # BR2_PACKAGE_HAPROXY is not set # BR2_PACKAGE_HIAWATHA is not set # BR2_PACKAGE_HOSTAPD is not set # BR2_PACKAGE_HTPDATE is not set # BR2_PACKAGE_HTTPING is not set # BR2_PACKAGE_I2PD is not set # BR2_PACKAGE_IBRDTN_TOOLS is not set # BR2_PACKAGE_IBRDTND is not set # BR2_PACKAGE_IFMETRIC is not set # BR2_PACKAGE_IFTOP is not set BR2_PACKAGE_IFUPDOWN_SCRIPTS=y # BR2_PACKAGE_IGD2_FOR_LINUX is not set # BR2_PACKAGE_IGH_ETHERCAT is not set # BR2_PACKAGE_IGMPPROXY is not set # BR2_PACKAGE_INADYN is not set # BR2_PACKAGE_IODINE is not set # BR2_PACKAGE_IPERF is not set # BR2_PACKAGE_IPERF3 is not set # BR2_PACKAGE_IPROUTE2 is not set # BR2_PACKAGE_IPSET is not set # BR2_PACKAGE_IPTABLES is not set # BR2_PACKAGE_IPTRAF_NG is not set # BR2_PACKAGE_IPUTILS is not set # BR2_PACKAGE_IRSSI is not set # BR2_PACKAGE_IW is not set # BR2_PACKAGE_IWD is not set # BR2_PACKAGE_JANUS_GATEWAY is not set # BR2_PACKAGE_KEEPALIVED is not set # BR2_PACKAGE_KISMET is not set # BR2_PACKAGE_KNOCK is not set # BR2_PACKAGE_LEAFNODE2 is not set # BR2_PACKAGE_LFT is not set # BR2_PACKAGE_LFTP is not set # BR2_PACKAGE_LIGHTTPD is not set # BR2_PACKAGE_LINKNX is not set # BR2_PACKAGE_LINKS is not set # BR2_PACKAGE_LINPHONE is not set # BR2_PACKAGE_LINUX_ZIGBEE is not set # BR2_PACKAGE_LINUXPTP is not set # BR2_PACKAGE_LLDPD is not set # BR2_PACKAGE_LRZSZ is not set # BR2_PACKAGE_LYNX is not set # BR2_PACKAGE_MACCHANGER is not set # BR2_PACKAGE_MEMCACHED is not set # BR2_PACKAGE_MII_DIAG is not set # BR2_PACKAGE_MINI_SNMPD is not set # BR2_PACKAGE_MINIDLNA is not set # BR2_PACKAGE_MINISSDPD is not set BR2_PACKAGE_MJPG_STREAMER=y # BR2_PACKAGE_MODEM_MANAGER is not set BR2_PACKAGE_MONGREL2_LIBC_SUPPORTS=y # BR2_PACKAGE_MONGREL2 is not set # BR2_PACKAGE_MONKEY is not set # BR2_PACKAGE_MOSH is not set # BR2_PACKAGE_MOSQUITTO is not set # BR2_PACKAGE_MROUTED is not set # BR2_PACKAGE_MRP is not set # BR2_PACKAGE_MTR is not set # BR2_PACKAGE_NBD is not set # BR2_PACKAGE_NCFTP is not set # BR2_PACKAGE_NDISC6 is not set # BR2_PACKAGE_NETATALK is not set # BR2_PACKAGE_NETCALC is not set # BR2_PACKAGE_NETPLUG is not set # BR2_PACKAGE_NETSNMP is not set # BR2_PACKAGE_NETSTAT_NAT is not set # BR2_PACKAGE_NETWORK_MANAGER is not set # BR2_PACKAGE_NFACCT is not set # BR2_PACKAGE_NFTABLES is not set # BR2_PACKAGE_NGINX is not set # BR2_PACKAGE_NGIRCD is not set # BR2_PACKAGE_NGREP is not set # BR2_PACKAGE_NLOAD is not set # BR2_PACKAGE_NMAP is not set # BR2_PACKAGE_NOIP is not set # BR2_PACKAGE_NTP is not set # BR2_PACKAGE_NUTTCP is not set # BR2_PACKAGE_ODHCP6C is not set # BR2_PACKAGE_ODHCPLOC is not set # BR2_PACKAGE_OLSR is not set # BR2_PACKAGE_OPEN_LLDP is not set # BR2_PACKAGE_OPEN_PLC_UTILS is not set # BR2_PACKAGE_OPENNTPD is not set # BR2_PACKAGE_OPENOBEX is not set # BR2_PACKAGE_OPENRESOLV is not set # BR2_PACKAGE_OPENSSH is not set # BR2_PACKAGE_OPENSWAN is not set # BR2_PACKAGE_OPENVPN is not set # BR2_PACKAGE_P910ND is not set # BR2_PACKAGE_PARPROUTED is not set # BR2_PACKAGE_PHIDGETWEBSERVICE is not set # BR2_PACKAGE_PHYTOOL is not set # BR2_PACKAGE_PIMD is not set # BR2_PACKAGE_PIXIEWPS is not set # BR2_PACKAGE_POUND is not set # BR2_PACKAGE_PPPD is not set # BR2_PACKAGE_PPTP_LINUX is not set # BR2_PACKAGE_PRIVOXY is not set # BR2_PACKAGE_PROFTPD is not set # # prosody needs a Lua <= 5.3 # # BR2_PACKAGE_PROXYCHAINS_NG is not set # BR2_PACKAGE_PTPD is not set # BR2_PACKAGE_PTPD2 is not set # BR2_PACKAGE_PURE_FTPD is not set # BR2_PACKAGE_PUTTY is not set # BR2_PACKAGE_QUAGGA is not set # # rabbitmq-server needs erlang # # BR2_PACKAGE_RADVD is not set # BR2_PACKAGE_REAVER is not set # BR2_PACKAGE_REDIR is not set # BR2_PACKAGE_RP_PPPOE is not set # BR2_PACKAGE_RPCBIND is not set # BR2_PACKAGE_RSH_REDONE is not set # BR2_PACKAGE_RSYNC is not set # BR2_PACKAGE_RTORRENT is not set # BR2_PACKAGE_RTPTOOLS is not set # BR2_PACKAGE_RYGEL is not set # BR2_PACKAGE_S6_DNS is not set # BR2_PACKAGE_S6_NETWORKING is not set # BR2_PACKAGE_SAMBA4 is not set # BR2_PACKAGE_SCONESERVER is not set # BR2_PACKAGE_SER2NET is not set # BR2_PACKAGE_SHADOWSOCKS_LIBEV is not set # BR2_PACKAGE_SHAIRPORT_SYNC is not set # BR2_PACKAGE_SHELLINABOX is not set # BR2_PACKAGE_SMCROUTE is not set # BR2_PACKAGE_SNGREP is not set # BR2_PACKAGE_SNORT is not set # BR2_PACKAGE_SOCAT is not set # BR2_PACKAGE_SOCKETCAND is not set # BR2_PACKAGE_SOFTETHER is not set # BR2_PACKAGE_SPAWN_FCGI is not set # BR2_PACKAGE_SPICE_PROTOCOL is not set # BR2_PACKAGE_SQUID is not set # BR2_PACKAGE_SSDP_RESPONDER is not set # BR2_PACKAGE_SSHGUARD is not set # BR2_PACKAGE_SSHPASS is not set # BR2_PACKAGE_SSLH is not set # BR2_PACKAGE_STRONGSWAN is not set # BR2_PACKAGE_STUNNEL is not set # BR2_PACKAGE_TCPDUMP is not set # BR2_PACKAGE_TCPING is not set # BR2_PACKAGE_TCPREPLAY is not set # BR2_PACKAGE_THTTPD is not set # BR2_PACKAGE_TINC is not set # BR2_PACKAGE_TINYPROXY is not set # BR2_PACKAGE_TINYSSH is not set # BR2_PACKAGE_TOR is not set # BR2_PACKAGE_TRACEROUTE is not set # BR2_PACKAGE_TRANSMISSION is not set # BR2_PACKAGE_TUNCTL is not set # BR2_PACKAGE_TVHEADEND is not set # BR2_PACKAGE_UACME is not set # BR2_PACKAGE_UDPCAST is not set # BR2_PACKAGE_UFTP is not set # BR2_PACKAGE_UHTTPD is not set # BR2_PACKAGE_ULOGD is not set # BR2_PACKAGE_UNBOUND is not set # BR2_PACKAGE_UREDIR is not set # BR2_PACKAGE_USHARE is not set # BR2_PACKAGE_USSP_PUSH is not set # BR2_PACKAGE_VDE2 is not set # BR2_PACKAGE_VDR is not set # BR2_PACKAGE_VNSTAT is not set # BR2_PACKAGE_VPNC is not set # BR2_PACKAGE_VSFTPD is not set # BR2_PACKAGE_VTUN is not set # BR2_PACKAGE_WAVEMON is not set # BR2_PACKAGE_WIREGUARD_LINUX_COMPAT is not set # BR2_PACKAGE_WIREGUARD_TOOLS is not set # BR2_PACKAGE_WIRELESS_REGDB is not set # BR2_PACKAGE_WIRELESS_TOOLS is not set # BR2_PACKAGE_WIRESHARK is not set # BR2_PACKAGE_WPA_SUPPLICANT is not set # BR2_PACKAGE_WPAN_TOOLS is not set # BR2_PACKAGE_XINETD is not set # BR2_PACKAGE_XL2TP is not set # BR2_PACKAGE_XTABLES_ADDONS is not set # BR2_PACKAGE_ZNC is not set # # Package managers # # # ------------------------------------------------------- # # # Please note: # # # - Buildroot does *not* generate binary packages, # # # - Buildroot does *not* install any package database. # # # * # # # It is up to you to provide those by yourself if you # # # want to use any of those package managers. # # # * # # # See the manual: # # # http://buildroot.org/manual.html#faq-no-binary-packages # # # ------------------------------------------------------- # # BR2_PACKAGE_OPKG is not set # # Real-Time # # BR2_PACKAGE_XENOMAI is not set # # Security # # BR2_PACKAGE_APPARMOR is not set # BR2_PACKAGE_CHECKPOLICY is not set # BR2_PACKAGE_IMA_EVM_UTILS is not set # BR2_PACKAGE_OPTEE_BENCHMARK is not set # BR2_PACKAGE_OPTEE_CLIENT is not set # BR2_PACKAGE_PAXTEST is not set # BR2_PACKAGE_REFPOLICY is not set # BR2_PACKAGE_RESTORECOND is not set # BR2_PACKAGE_SELINUX_PYTHON is not set # BR2_PACKAGE_SEMODULE_UTILS is not set # # setools needs python3 # BR2_PACKAGE_URANDOM_SCRIPTS=y # # Shell and utilities # # # Shells # # BR2_PACKAGE_MKSH is not set # BR2_PACKAGE_ZSH is not set # # Utilities # # BR2_PACKAGE_AT is not set # BR2_PACKAGE_CCRYPT is not set # BR2_PACKAGE_DIALOG is not set # BR2_PACKAGE_DTACH is not set # BR2_PACKAGE_EASY_RSA is not set # BR2_PACKAGE_FILE is not set # BR2_PACKAGE_GNUPG is not set # BR2_PACKAGE_GNUPG2 is not set # BR2_PACKAGE_INOTIFY_TOOLS is not set # BR2_PACKAGE_LOCKFILE_PROGS is not set # BR2_PACKAGE_LOGROTATE is not set # BR2_PACKAGE_LOGSURFER is not set # BR2_PACKAGE_PDMENU is not set # BR2_PACKAGE_PINENTRY is not set # BR2_PACKAGE_QPRINT is not set # BR2_PACKAGE_RANGER is not set # BR2_PACKAGE_RTTY is not set # BR2_PACKAGE_SCREEN is not set # BR2_PACKAGE_SUDO is not set # BR2_PACKAGE_TINI is not set # BR2_PACKAGE_TMUX is not set # BR2_PACKAGE_TTYD is not set # BR2_PACKAGE_XMLSTARLET is not set # BR2_PACKAGE_XXHASH is not set # BR2_PACKAGE_YTREE is not set # # System tools # # BR2_PACKAGE_ACL is not set # BR2_PACKAGE_ANDROID_TOOLS is not set # BR2_PACKAGE_ATOP is not set # BR2_PACKAGE_ATTR is not set # BR2_PACKAGE_BUBBLEWRAP is not set # BR2_PACKAGE_CGROUPFS_MOUNT is not set # # circus needs Python 3 and a toolchain w/ C++, threads # # BR2_PACKAGE_CPULOAD is not set # BR2_PACKAGE_DAEMON is not set # BR2_PACKAGE_DC3DD is not set # BR2_PACKAGE_DDRESCUE is not set # BR2_PACKAGE_DOCKER_COMPOSE is not set # BR2_PACKAGE_EARLYOOM is not set # BR2_PACKAGE_EMLOG is not set # BR2_PACKAGE_FTOP is not set # BR2_PACKAGE_GETENT is not set # BR2_PACKAGE_GKRELLM is not set # BR2_PACKAGE_HTOP is not set # BR2_PACKAGE_IBM_SW_TPM2 is not set BR2_PACKAGE_INITSCRIPTS=y # # iotop depends on python or python3 # # BR2_PACKAGE_IPRUTILS is not set # BR2_PACKAGE_IRQBALANCE is not set # BR2_PACKAGE_KEYUTILS is not set BR2_PACKAGE_KMOD=y # BR2_PACKAGE_LIBOSTREE is not set # BR2_PACKAGE_LXC is not set # BR2_PACKAGE_MFOC is not set # BR2_PACKAGE_MONIT is not set # BR2_PACKAGE_MULTIPATH_TOOLS is not set # BR2_PACKAGE_NCDU is not set # # netifrc needs openrc as init system # # BR2_PACKAGE_NUT is not set # # pamtester depends on linux-pam # # BR2_PACKAGE_POLKIT is not set # BR2_PACKAGE_PROCRANK_LINUX is not set # BR2_PACKAGE_PWGEN is not set # BR2_PACKAGE_QUOTA is not set # BR2_PACKAGE_QUOTATOOL is not set # BR2_PACKAGE_RAUC is not set # BR2_PACKAGE_S6 is not set # BR2_PACKAGE_S6_LINUX_INIT is not set # BR2_PACKAGE_S6_LINUX_UTILS is not set # BR2_PACKAGE_S6_PORTABLE_UTILS is not set # BR2_PACKAGE_S6_RC is not set # BR2_PACKAGE_SCRUB is not set # BR2_PACKAGE_SCRYPT is not set # # sdbusplus needs systemd and a toolchain w/ C++, gcc >= 7 # # BR2_PACKAGE_SMACK is not set # # supervisor needs a python interpreter # # BR2_PACKAGE_SWUPDATE is not set BR2_PACKAGE_SYSTEMD_ARCH_SUPPORTS=y # BR2_PACKAGE_TPM_TOOLS is not set # BR2_PACKAGE_TPM2_ABRMD is not set # BR2_PACKAGE_TPM2_TOOLS is not set # BR2_PACKAGE_TPM2_TOTP is not set # BR2_PACKAGE_UNSCD is not set BR2_PACKAGE_UTIL_LINUX=y BR2_PACKAGE_UTIL_LINUX_LIBS=y BR2_PACKAGE_UTIL_LINUX_LIBBLKID=y # BR2_PACKAGE_UTIL_LINUX_LIBFDISK is not set # BR2_PACKAGE_UTIL_LINUX_LIBMOUNT is not set # BR2_PACKAGE_UTIL_LINUX_LIBSMARTCOLS is not set BR2_PACKAGE_UTIL_LINUX_LIBUUID=y # BR2_PACKAGE_UTIL_LINUX_BINARIES is not set # BR2_PACKAGE_UTIL_LINUX_AGETTY is not set # BR2_PACKAGE_UTIL_LINUX_BFS is not set # BR2_PACKAGE_UTIL_LINUX_CAL is not set # BR2_PACKAGE_UTIL_LINUX_CHFN_CHSH is not set # BR2_PACKAGE_UTIL_LINUX_CHMEM is not set # BR2_PACKAGE_UTIL_LINUX_CRAMFS is not set # BR2_PACKAGE_UTIL_LINUX_EJECT is not set # BR2_PACKAGE_UTIL_LINUX_FALLOCATE is not set # BR2_PACKAGE_UTIL_LINUX_FDFORMAT is not set # BR2_PACKAGE_UTIL_LINUX_FSCK is not set # BR2_PACKAGE_UTIL_LINUX_HARDLINK is not set # BR2_PACKAGE_UTIL_LINUX_HWCLOCK is not set # BR2_PACKAGE_UTIL_LINUX_IPCRM is not set # BR2_PACKAGE_UTIL_LINUX_IPCS is not set # BR2_PACKAGE_UTIL_LINUX_KILL is not set # BR2_PACKAGE_UTIL_LINUX_LAST is not set # BR2_PACKAGE_UTIL_LINUX_LINE is not set # BR2_PACKAGE_UTIL_LINUX_LOGGER is not set # BR2_PACKAGE_UTIL_LINUX_LOGIN is not set # BR2_PACKAGE_UTIL_LINUX_LOSETUP is not set # BR2_PACKAGE_UTIL_LINUX_LSLOGINS is not set # BR2_PACKAGE_UTIL_LINUX_LSMEM is not set # BR2_PACKAGE_UTIL_LINUX_MESG is not set # BR2_PACKAGE_UTIL_LINUX_MINIX is not set # BR2_PACKAGE_UTIL_LINUX_MORE is not set # BR2_PACKAGE_UTIL_LINUX_MOUNT is not set # BR2_PACKAGE_UTIL_LINUX_MOUNTPOINT is not set # BR2_PACKAGE_UTIL_LINUX_NEWGRP is not set # BR2_PACKAGE_UTIL_LINUX_NOLOGIN is not set # BR2_PACKAGE_UTIL_LINUX_NSENTER is not set # BR2_PACKAGE_UTIL_LINUX_PG is not set # BR2_PACKAGE_UTIL_LINUX_PARTX is not set # BR2_PACKAGE_UTIL_LINUX_PIVOT_ROOT is not set # BR2_PACKAGE_UTIL_LINUX_RAW is not set # BR2_PACKAGE_UTIL_LINUX_RENAME is not set # BR2_PACKAGE_UTIL_LINUX_RFKILL is not set # BR2_PACKAGE_UTIL_LINUX_RUNUSER is not set # BR2_PACKAGE_UTIL_LINUX_SCHEDUTILS is not set # BR2_PACKAGE_UTIL_LINUX_SETPRIV is not set # BR2_PACKAGE_UTIL_LINUX_SETTERM is not set # BR2_PACKAGE_UTIL_LINUX_SU is not set # BR2_PACKAGE_UTIL_LINUX_SULOGIN is not set # BR2_PACKAGE_UTIL_LINUX_SWITCH_ROOT is not set # BR2_PACKAGE_UTIL_LINUX_TUNELP is not set # BR2_PACKAGE_UTIL_LINUX_UL is not set # BR2_PACKAGE_UTIL_LINUX_UNSHARE is not set # BR2_PACKAGE_UTIL_LINUX_UTMPDUMP is not set BR2_PACKAGE_UTIL_LINUX_UUIDD=y # BR2_PACKAGE_UTIL_LINUX_VIPW is not set # BR2_PACKAGE_UTIL_LINUX_WALL is not set # BR2_PACKAGE_UTIL_LINUX_WIPEFS is not set # BR2_PACKAGE_UTIL_LINUX_WDCTL is not set # BR2_PACKAGE_UTIL_LINUX_WRITE is not set # BR2_PACKAGE_UTIL_LINUX_ZRAMCTL is not set # BR2_PACKAGE_WATCHDOG is not set # BR2_PACKAGE_XDG_DBUS_PROXY is not set # # Text editors and viewers # # BR2_PACKAGE_ED is not set # BR2_PACKAGE_JOE is not set # BR2_PACKAGE_MC is not set # BR2_PACKAGE_MG is not set # BR2_PACKAGE_MOST is not set # BR2_PACKAGE_NANO is not set # BR2_PACKAGE_UEMACS is not set # # Filesystem images # # BR2_TARGET_ROOTFS_AXFS is not set # BR2_TARGET_ROOTFS_BTRFS is not set # BR2_TARGET_ROOTFS_CLOOP is not set # BR2_TARGET_ROOTFS_CPIO is not set # BR2_TARGET_ROOTFS_CRAMFS is not set # BR2_TARGET_ROOTFS_EROFS is not set BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_EXT2_2r0 is not set # BR2_TARGET_ROOTFS_EXT2_2r1 is not set # BR2_TARGET_ROOTFS_EXT2_3 is not set BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_ROOTFS_EXT2_GEN=4 BR2_TARGET_ROOTFS_EXT2_REV=1 BR2_TARGET_ROOTFS_EXT2_LABEL="rootfs" BR2_TARGET_ROOTFS_EXT2_SIZE="130M" BR2_TARGET_ROOTFS_EXT2_INODES=0 BR2_TARGET_ROOTFS_EXT2_RESBLKS=5 BR2_TARGET_ROOTFS_EXT2_MKFS_OPTIONS="-O ^64bit" BR2_TARGET_ROOTFS_EXT2_NONE=y # BR2_TARGET_ROOTFS_EXT2_GZIP is not set # BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set # BR2_TARGET_ROOTFS_EXT2_LZ4 is not set # BR2_TARGET_ROOTFS_EXT2_LZMA is not set # BR2_TARGET_ROOTFS_EXT2_LZO is not set # BR2_TARGET_ROOTFS_EXT2_XZ is not set # BR2_TARGET_ROOTFS_F2FS is not set # BR2_TARGET_ROOTFS_INITRAMFS is not set # BR2_TARGET_ROOTFS_JFFS2 is not set # BR2_TARGET_ROOTFS_ROMFS is not set # BR2_TARGET_ROOTFS_SQUASHFS is not set BR2_TARGET_ROOTFS_TAR=y BR2_TARGET_ROOTFS_TAR_NONE=y # BR2_TARGET_ROOTFS_TAR_GZIP is not set # BR2_TARGET_ROOTFS_TAR_BZIP2 is not set # BR2_TARGET_ROOTFS_TAR_LZ4 is not set # BR2_TARGET_ROOTFS_TAR_LZMA is not set # BR2_TARGET_ROOTFS_TAR_LZO is not set # BR2_TARGET_ROOTFS_TAR_XZ is not set BR2_TARGET_ROOTFS_TAR_OPTIONS="" # BR2_TARGET_ROOTFS_UBI is not set # BR2_TARGET_ROOTFS_UBIFS is not set # BR2_TARGET_ROOTFS_YAFFS2 is not set # # Bootloaders # # BR2_TARGET_BAREBOX is not set BR2_TARGET_OPENSBI=y BR2_TARGET_OPENSBI_PLAT="thead/c910" # BR2_TARGET_OPENSBI_LINUX_PAYLOAD is not set BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y # BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY is not set # BR2_TARGET_UBOOT_LATEST_VERSION is not set # BR2_TARGET_UBOOT_CUSTOM_VERSION is not set # BR2_TARGET_UBOOT_CUSTOM_TARBALL is not set BR2_TARGET_UBOOT_CUSTOM_GIT=y # BR2_TARGET_UBOOT_CUSTOM_HG is not set # BR2_TARGET_UBOOT_CUSTOM_SVN is not set BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://gitee.com/weidongshan/NezaD1-u-boot-2018.git" BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="origin/master" BR2_TARGET_UBOOT_VERSION="origin/master" BR2_TARGET_UBOOT_PATCH="" BR2_TARGET_UBOOT_USE_DEFCONFIG=y # BR2_TARGET_UBOOT_USE_CUSTOM_CONFIG is not set BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sun20iw1p1" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYTHON=y # BR2_TARGET_UBOOT_NEEDS_PYTHON2 is not set BR2_TARGET_UBOOT_NEEDS_PYTHON3=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y # BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS is not set BR2_TARGET_UBOOT_NEEDS_OPENSSL=y # BR2_TARGET_UBOOT_NEEDS_LZOP is not set BR2_TARGET_UBOOT_NEEDS_OPENSBI=y # # U-Boot binary format # # BR2_TARGET_UBOOT_FORMAT_AIS is not set # BR2_TARGET_UBOOT_FORMAT_BIN is not set # BR2_TARGET_UBOOT_FORMAT_DTB_BIN is not set # BR2_TARGET_UBOOT_FORMAT_NAND_BIN is not set # BR2_TARGET_UBOOT_FORMAT_ELF is not set # BR2_TARGET_UBOOT_FORMAT_IMG is not set # BR2_TARGET_UBOOT_FORMAT_DTB_IMG is not set # BR2_TARGET_UBOOT_FORMAT_IMX is not set # BR2_TARGET_UBOOT_FORMAT_DTB_IMX is not set # BR2_TARGET_UBOOT_FORMAT_ITB is not set BR2_TARGET_UBOOT_FORMAT_CUSTOM=y BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sun20iw1p1.bin" # BR2_TARGET_UBOOT_SPL is not set BR2_TARGET_UBOOT_CUSTOM_DTS_PATH="" BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="" # # Host utilities # # BR2_PACKAGE_HOST_ABOOTIMG is not set # BR2_PACKAGE_HOST_AESPIPE is not set # BR2_PACKAGE_HOST_ANDROID_TOOLS is not set # BR2_PACKAGE_HOST_ASN1C is not set # BR2_PACKAGE_HOST_BABELTRACE2 is not set # BR2_PACKAGE_HOST_BTRFS_PROGS is not set # BR2_PACKAGE_HOST_CHECKPOLICY is not set # BR2_PACKAGE_HOST_CHECKSEC is not set # BR2_PACKAGE_HOST_CMAKE is not set # BR2_PACKAGE_HOST_CRAMFS is not set # BR2_PACKAGE_HOST_CRYPTSETUP is not set # BR2_PACKAGE_HOST_DBUS_PYTHON is not set # BR2_PACKAGE_HOST_DFU_UTIL is not set # BR2_PACKAGE_HOST_DOS2UNIX is not set # BR2_PACKAGE_HOST_DOSFSTOOLS is not set # BR2_PACKAGE_HOST_DOXYGEN is not set BR2_PACKAGE_HOST_DTC=y BR2_PACKAGE_HOST_E2FSPROGS=y # BR2_PACKAGE_HOST_E2TOOLS is not set # BR2_PACKAGE_HOST_ENVIRONMENT_SETUP is not set # BR2_PACKAGE_HOST_EROFS_UTILS is not set BR2_PACKAGE_HOST_EUDEV=y # BR2_PACKAGE_HOST_EXFATPROGS is not set # BR2_PACKAGE_HOST_F2FS_TOOLS is not set # BR2_PACKAGE_HOST_FAKETIME is not set # BR2_PACKAGE_HOST_FATCAT is not set # BR2_PACKAGE_HOST_FWUP is not set # BR2_PACKAGE_HOST_GENEXT2FS is not set BR2_PACKAGE_HOST_GENIMAGE=y # BR2_PACKAGE_HOST_GENPART is not set # BR2_PACKAGE_HOST_GNUPG is not set BR2_PACKAGE_HOST_GO_HOST_ARCH_SUPPORTS=y BR2_PACKAGE_HOST_GO_BOOTSTRAP_ARCH_SUPPORTS=y BR2_PACKAGE_HOST_GOOGLE_BREAKPAD_ARCH_SUPPORTS=y # BR2_PACKAGE_HOST_GPTFDISK is not set # BR2_PACKAGE_HOST_IMAGEMAGICK is not set # BR2_PACKAGE_HOST_IMX_MKIMAGE is not set # BR2_PACKAGE_HOST_JQ is not set # BR2_PACKAGE_HOST_JSMIN is not set BR2_PACKAGE_HOST_KMOD=y # BR2_PACKAGE_HOST_KMOD_GZ is not set # BR2_PACKAGE_HOST_KMOD_XZ is not set # BR2_PACKAGE_HOST_LIBP11 is not set # BR2_PACKAGE_HOST_LPC3250LOADER is not set # BR2_PACKAGE_HOST_LTTNG_BABELTRACE is not set # BR2_PACKAGE_HOST_MENDER_ARTIFACT is not set # BR2_PACKAGE_HOST_MESON_TOOLS is not set # BR2_PACKAGE_HOST_MKPASSWD is not set # BR2_PACKAGE_HOST_MTD is not set # BR2_PACKAGE_HOST_MTOOLS is not set # BR2_PACKAGE_HOST_ODB is not set # BR2_PACKAGE_HOST_OPENOCD is not set # BR2_PACKAGE_HOST_OPKG_UTILS is not set # BR2_PACKAGE_HOST_PARTED is not set BR2_PACKAGE_HOST_PATCHELF=y # BR2_PACKAGE_HOST_PIGZ is not set # BR2_PACKAGE_HOST_PKGCONF is not set # BR2_PACKAGE_HOST_PWGEN is not set # BR2_PACKAGE_HOST_PYTHON is not set # BR2_PACKAGE_HOST_PYTHON_CYTHON is not set # BR2_PACKAGE_HOST_PYTHON_LXML is not set # BR2_PACKAGE_HOST_PYTHON_SIX is not set # BR2_PACKAGE_HOST_PYTHON_XLRD is not set # BR2_PACKAGE_HOST_PYTHON3 is not set BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS=y BR2_PACKAGE_HOST_QEMU_SYSTEM_ARCH_SUPPORTS=y BR2_PACKAGE_HOST_QEMU_USER_ARCH_SUPPORTS=y # BR2_PACKAGE_HOST_QEMU is not set # BR2_PACKAGE_HOST_QORIQ_RCW is not set # BR2_PACKAGE_HOST_RAUC is not set BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS=y BR2_PACKAGE_HOST_RUSTC_ARCH="riscv64" # BR2_PACKAGE_HOST_RUSTC is not set BR2_PACKAGE_PROVIDES_HOST_RUSTC="host-rust-bin" # BR2_PACKAGE_HOST_SAM_BA is not set # BR2_PACKAGE_HOST_SDBUSPLUS is not set # BR2_PACKAGE_HOST_SENTRY_CLI is not set # BR2_PACKAGE_HOST_SQUASHFS is not set # BR2_PACKAGE_HOST_SWIG is not set BR2_PACKAGE_HOST_UBOOT_TOOLS=y # BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT is not set # BR2_PACKAGE_HOST_UBOOT_TOOLS_ENVIMAGE is not set BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/sifive/hifive-unleashed/boot.cmd" BR2_PACKAGE_HOST_UTIL_LINUX=y # BR2_PACKAGE_HOST_UTP_COM is not set # BR2_PACKAGE_HOST_VBOOT_UTILS is not set # BR2_PACKAGE_HOST_XORRISO is not set # BR2_PACKAGE_HOST_ZIP is not set # BR2_PACKAGE_HOST_ZSTD is not set # # Legacy config options # # # Legacy options removed in 2021.02 # # BR2_PACKAGE_MPD_AUDIOFILE is not set # BR2_PACKAGE_AUDIOFILE is not set # BR2_BINUTILS_VERSION_2_33_X is not set # BR2_PACKAGE_LIBUPNP18 is not set # BR2_PACKAGE_BOA is not set # BR2_PACKAGE_LINUX_FIRMWARE_IMX_SDMA is not set # BR2_GDB_VERSION_8_2 is not set # BR2_PACKAGE_HOST_RCW is not set # BR2_KERNEL_HEADERS_5_9 is not set # BR2_KERNEL_HEADERS_5_8 is not set # BR2_powerpc_601 is not set # BR2_PACKAGE_TI_SGX_LIBGBM is not set # BR2_PACKAGE_IPSEC_TOOLS is not set # # Legacy options removed in 2020.11 # # BR2_PACKAGE_OPENCV is not set # BR2_PACKAGE_LIBCROCO is not set # BR2_PACKAGE_BELLAGIO is not set # BR2_PACKAGE_SYSTEMD_JOURNAL_GATEWAY is not set # BR2_TARGET_UBOOT_BOOT_SCRIPT is not set # BR2_TARGET_UBOOT_ENVIMAGE is not set # BR2_PACKAGE_KISMET_CLIENT is not set # BR2_PACKAGE_KISMET_DRONE is not set # BR2_GCC_VERSION_7_X is not set # BR2_PACKAGE_GST1_VALIDATE is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_YADIF is not set # BR2_PACKAGE_GQVIEW is not set # BR2_PACKAGE_WESTON_IMX is not set # BR2_KERNEL_HEADERS_5_7 is not set # BR2_PACKAGE_TINYHTTPD is not set # BR2_PACKAGE_XSERVER_XORG_SERVER_AIGLX is not set # BR2_PACKAGE_AMD_CATALYST is not set # BR2_PACKAGE_NVIDIA_TEGRA23 is not set # BR2_GDB_VERSION_8_1 is not set # # Legacy options removed in 2020.08 # # BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AMD64 is not set # BR2_KERNEL_HEADERS_5_6 is not set # BR2_KERNEL_HEADERS_5_5 is not set # BR2_BINUTILS_VERSION_2_31_X is not set # BR2_PACKAGE_KODI_PERIPHERAL_STEAMCONTROLLER is not set # # Legacy options removed in 2020.05 # # BR2_PACKAGE_WIRINGPI is not set # BR2_PACKAGE_PYTHON_PYCRYPTO is not set # BR2_PACKAGE_MTDEV2TUIO is not set # BR2_PACKAGE_EZXML is not set # BR2_PACKAGE_COLLECTD_LVM is not set # BR2_PACKAGE_PYTHON_PYASN is not set # BR2_PACKAGE_PYTHON_PYASN_MODULES is not set # BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_10K_QCA6174 is not set # BR2_PACKAGE_QT5CANVAS3D is not set # BR2_PACKAGE_KODI_LIBTHEORA is not set # BR2_PACKAGE_CEGUI06 is not set # BR2_GCC_VERSION_5_X is not set # # Legacy options removed in 2020.02 # # BR2_PACKAGE_JAMVM is not set # BR2_PACKAGE_CLASSPATH is not set # BR2_PACKAGE_QT5_VERSION_5_6 is not set # BR2_PACKAGE_CURL is not set # BR2_PACKAGE_GSTREAMER is not set # BR2_PACKAGE_NVIDIA_TEGRA23_BINARIES_GSTREAMER_PLUGINS is not set # BR2_PACKAGE_NVIDIA_TEGRA23_BINARIES_NV_SAMPLE_APPS is not set # BR2_PACKAGE_FREERDP_GSTREAMER is not set # BR2_PACKAGE_OPENCV3_WITH_GSTREAMER is not set # BR2_PACKAGE_OPENCV_WITH_GSTREAMER is not set # BR2_PACKAGE_LIBPLAYER is not set # BR2_GCC_VERSION_OR1K is not set # BR2_PACKAGE_BLUEZ_UTILS is not set # BR2_PACKAGE_GADGETFS_TEST is not set # BR2_PACKAGE_FIS is not set BR2_PACKAGE_REFPOLICY_POLICY_VERSION="" # BR2_PACKAGE_CELT051 is not set # BR2_PACKAGE_WIREGUARD is not set # BR2_PACKAGE_PERL_NET_PING is not set # BR2_PACKAGE_PERL_MIME_BASE64 is not set # BR2_PACKAGE_PERL_DIGEST_MD5 is not set # BR2_PACKAGE_ERLANG_P1_ICONV is not set # BR2_KERNEL_HEADERS_5_3 is not set # BR2_PACKAGE_PYTHON_SCAPY3K is not set # BR2_BINUTILS_VERSION_2_30_X is not set # BR2_PACKAGE_RPI_USERLAND_START_VCFILED is not set # # Legacy options removed in 2019.11 # # BR2_PACKAGE_OPENVMTOOLS_PROCPS is not set # BR2_PACKAGE_ALLJOYN is not set # BR2_PACKAGE_ALLJOYN_BASE is not set # BR2_PACKAGE_ALLJOYN_BASE_CONTROLPANEL is not set # BR2_PACKAGE_ALLJOYN_BASE_NOTIFICATION is not set # BR2_PACKAGE_ALLJOYN_BASE_ONBOARDING is not set # BR2_PACKAGE_ALLJOYN_TCL_BASE is not set # BR2_PACKAGE_ALLJOYN_TCL is not set BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS="" # BR2_PACKAGE_PYTHON_PYSNMP_APPS is not set # BR2_KERNEL_HEADERS_5_2 is not set # BR2_TARGET_RISCV_PK is not set # BR2_PACKAGE_SQLITE_STAT3 is not set # BR2_KERNEL_HEADERS_5_1 is not set # BR2_PACKAGE_DEVMEM2 is not set # BR2_PACKAGE_USTR is not set # BR2_PACKAGE_KODI_SCREENSAVER_PLANESTATE is not set # BR2_PACKAGE_KODI_VISUALISATION_WAVEFORHUE is not set # BR2_PACKAGE_KODI_AUDIODECODER_OPUS is not set # BR2_PACKAGE_MESA3D_OSMESA is not set # BR2_PACKAGE_HOSTAPD_DRIVER_RTW is not set # BR2_PACKAGE_WPA_SUPPLICANT_DBUS_NEW is not set # BR2_PACKAGE_WPA_SUPPLICANT_DBUS_OLD is not set # # Legacy options removed in 2019.08 # # BR2_TARGET_TS4800_MBRBOOT is not set # BR2_PACKAGE_LIBAMCODEC is not set # BR2_PACKAGE_ODROID_SCRIPTS is not set # BR2_PACKAGE_ODROID_MALI is not set # BR2_PACKAGE_KODI_PLATFORM_AML is not set # BR2_GCC_VERSION_6_X is not set # BR2_GCC_VERSION_4_9_X is not set # BR2_GDB_VERSION_7_12 is not set # BR2_PACKAGE_XAPP_MKFONTDIR is not set # BR2_GDB_VERSION_8_0 is not set # BR2_KERNEL_HEADERS_4_20 is not set # BR2_KERNEL_HEADERS_5_0 is not set # # Legacy options removed in 2019.05 # # BR2_CSKY_DSP is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_COMPOSITOR is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_IQA is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_OPENCV is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_STEREO is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_VCD is not set # BR2_PACKAGE_LUNIT is not set # BR2_PACKAGE_FFMPEG_FFSERVER is not set # BR2_PACKAGE_LIBUMP is not set # BR2_PACKAGE_SUNXI_MALI is not set # BR2_BINUTILS_VERSION_2_29_X is not set # BR2_BINUTILS_VERSION_2_28_X is not set # BR2_PACKAGE_GST_PLUGINS_BAD_PLUGIN_APEXSINK is not set # # Legacy options removed in 2019.02 # # BR2_PACKAGE_QT is not set # BR2_PACKAGE_QTUIO is not set # BR2_PACKAGE_PINENTRY_QT4 is not set # BR2_PACKAGE_POPPLER_QT is not set # BR2_PACKAGE_OPENCV3_WITH_QT is not set # BR2_PACKAGE_OPENCV_WITH_QT is not set # BR2_PACKAGE_AMD_CATALYST_CCCLE is not set # BR2_PACKAGE_SDL_QTOPIA is not set # BR2_PACKAGE_PYTHON_PYQT is not set # BR2_PACKAGE_LUACRYPTO is not set # BR2_PACKAGE_TN5250 is not set # BR2_PACKAGE_BOOST_SIGNALS is not set # BR2_PACKAGE_FFTW_PRECISION_SINGLE is not set # BR2_PACKAGE_FFTW_PRECISION_DOUBLE is not set # BR2_PACKAGE_FFTW_PRECISION_LONG_DOUBLE is not set # BR2_PACKAGE_LUA_5_2 is not set # BR2_TARGET_GENERIC_PASSWD_MD5 is not set # # Legacy options removed in 2018.11 # # BR2_TARGET_XLOADER is not set # BR2_PACKAGE_TIDSP_BINARIES is not set # BR2_PACKAGE_DSP_TOOLS is not set # BR2_PACKAGE_GST_DSP is not set # BR2_PACKAGE_BOOTUTILS is not set # BR2_PACKAGE_EXPEDITE is not set # BR2_PACKAGE_MESA3D_OPENGL_TEXTURE_FLOAT is not set # BR2_KERNEL_HEADERS_4_10 is not set # BR2_KERNEL_HEADERS_4_11 is not set # BR2_KERNEL_HEADERS_4_12 is not set # BR2_KERNEL_HEADERS_4_13 is not set # BR2_KERNEL_HEADERS_4_15 is not set # BR2_KERNEL_HEADERS_4_17 is not set # BR2_PACKAGE_LIBNFTNL_XML is not set # BR2_KERNEL_HEADERS_3_2 is not set # BR2_KERNEL_HEADERS_4_1 is not set # BR2_KERNEL_HEADERS_4_16 is not set # BR2_KERNEL_HEADERS_4_18 is not set # # Legacy options removed in 2018.08 # # BR2_PACKAGE_DOCKER_ENGINE_STATIC_CLIENT is not set # BR2_PACKAGE_XPROTO_APPLEWMPROTO is not set # BR2_PACKAGE_XPROTO_BIGREQSPROTO is not set # BR2_PACKAGE_XPROTO_COMPOSITEPROTO is not set # BR2_PACKAGE_XPROTO_DAMAGEPROTO is not set # BR2_PACKAGE_XPROTO_DMXPROTO is not set # BR2_PACKAGE_XPROTO_DRI2PROTO is not set # BR2_PACKAGE_XPROTO_DRI3PROTO is not set # BR2_PACKAGE_XPROTO_FIXESPROTO is not set # BR2_PACKAGE_XPROTO_FONTCACHEPROTO is not set # BR2_PACKAGE_XPROTO_FONTSPROTO is not set # BR2_PACKAGE_XPROTO_GLPROTO is not set # BR2_PACKAGE_XPROTO_INPUTPROTO is not set # BR2_PACKAGE_XPROTO_KBPROTO is not set # BR2_PACKAGE_XPROTO_PRESENTPROTO is not set # BR2_PACKAGE_XPROTO_RANDRPROTO is not set # BR2_PACKAGE_XPROTO_RECORDPROTO is not set # BR2_PACKAGE_XPROTO_RENDERPROTO is not set # BR2_PACKAGE_XPROTO_RESOURCEPROTO is not set # BR2_PACKAGE_XPROTO_SCRNSAVERPROTO is not set # BR2_PACKAGE_XPROTO_VIDEOPROTO is not set # BR2_PACKAGE_XPROTO_WINDOWSWMPROTO is not set # BR2_PACKAGE_XPROTO_XCMISCPROTO is not set # BR2_PACKAGE_XPROTO_XEXTPROTO is not set # BR2_PACKAGE_XPROTO_XF86BIGFONTPROTO is not set # BR2_PACKAGE_XPROTO_XF86DGAPROTO is not set # BR2_PACKAGE_XPROTO_XF86DRIPROTO is not set # BR2_PACKAGE_XPROTO_XF86VIDMODEPROTO is not set # BR2_PACKAGE_XPROTO_XINERAMAPROTO is not set # BR2_PACKAGE_XPROTO_XPROTO is not set # BR2_PACKAGE_XPROTO_XPROXYMANAGEMENTPROTOCOL is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_LIB_OPENGL_OPENGL is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_LIB_OPENGL_GLES2 is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_LIB_OPENGL_GLX is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_LIB_OPENGL_EGL is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_LIB_OPENGL_X11 is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_LIB_OPENGL_WAYLAND is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_LIB_OPENGL_DISPMANX is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_AUDIOMIXER is not set # BR2_PACKAGE_GST1_PLUGINS_UGLY_PLUGIN_LAME is not set # BR2_PACKAGE_GST1_PLUGINS_UGLY_PLUGIN_MPG123 is not set # BR2_GDB_VERSION_7_11 is not set # BR2_GDB_VERSION_7_10 is not set # # Legacy options removed in 2018.05 # # BR2_PACKAGE_MEDIAART_BACKEND_NONE is not set # BR2_PACKAGE_MEDIAART_BACKEND_GDK_PIXBUF is not set # BR2_PACKAGE_TI_SGX_AM335X is not set # BR2_PACKAGE_TI_SGX_AM437X is not set # BR2_PACKAGE_TI_SGX_AM4430 is not set # BR2_PACKAGE_TI_SGX_AM5430 is not set # BR2_PACKAGE_JANUS_AUDIO_BRIDGE is not set # BR2_PACKAGE_JANUS_ECHO_TEST is not set # BR2_PACKAGE_JANUS_RECORDPLAY is not set # BR2_PACKAGE_JANUS_SIP_GATEWAY is not set # BR2_PACKAGE_JANUS_STREAMING is not set # BR2_PACKAGE_JANUS_TEXT_ROOM is not set # BR2_PACKAGE_JANUS_VIDEO_CALL is not set # BR2_PACKAGE_JANUS_VIDEO_ROOM is not set # BR2_PACKAGE_JANUS_MQTT is not set # BR2_PACKAGE_JANUS_RABBITMQ is not set # BR2_PACKAGE_JANUS_REST is not set # BR2_PACKAGE_JANUS_UNIX_SOCKETS is not set # BR2_PACKAGE_JANUS_WEBSOCKETS is not set # BR2_PACKAGE_IPSEC_SECCTX_DISABLE is not set # BR2_PACKAGE_IPSEC_SECCTX_ENABLE is not set # BR2_PACKAGE_IPSEC_SECCTX_KERNEL is not set # BR2_PACKAGE_LIBTFDI_CPP is not set # BR2_PACKAGE_JQUERY_UI_THEME_BLACK_TIE is not set # BR2_PACKAGE_JQUERY_UI_THEME_BLITZER is not set # BR2_PACKAGE_JQUERY_UI_THEME_CUPERTINO is not set # BR2_PACKAGE_JQUERY_UI_THEME_DARK_HIVE is not set # BR2_PACKAGE_JQUERY_UI_THEME_DOT_LUV is not set # BR2_PACKAGE_JQUERY_UI_THEME_EGGPLANT is not set # BR2_PACKAGE_JQUERY_UI_THEME_EXCITE_BIKE is not set # BR2_PACKAGE_JQUERY_UI_THEME_FLICK is not set # BR2_PACKAGE_JQUERY_UI_THEME_HOT_SNEAKS is not set # BR2_PACKAGE_JQUERY_UI_THEME_HUMANITY is not set # BR2_PACKAGE_JQUERY_UI_THEME_LE_FROG is not set # BR2_PACKAGE_JQUERY_UI_THEME_MINT_CHOC is not set # BR2_PACKAGE_JQUERY_UI_THEME_OVERCAST is not set # BR2_PACKAGE_JQUERY_UI_THEME_PEPPER_GRINDER is not set # BR2_PACKAGE_JQUERY_UI_THEME_REDMOND is not set # BR2_PACKAGE_JQUERY_UI_THEME_SMOOTHNESS is not set # BR2_PACKAGE_JQUERY_UI_THEME_SOUTH_STREET is not set # BR2_PACKAGE_JQUERY_UI_THEME_START is not set # BR2_PACKAGE_JQUERY_UI_THEME_SUNNY is not set # BR2_PACKAGE_JQUERY_UI_THEME_SWANKY_PURSE is not set # BR2_PACKAGE_JQUERY_UI_THEME_TRONTASTIC is not set # BR2_PACKAGE_JQUERY_UI_THEME_UI_DARKNESS is not set # BR2_PACKAGE_JQUERY_UI_THEME_UI_LIGHTNESS is not set # BR2_PACKAGE_JQUERY_UI_THEME_VADER is not set # BR2_PACKAGE_BLUEZ5_PLUGINS_HEALTH is not set # BR2_PACKAGE_BLUEZ5_PLUGINS_MIDI is not set # BR2_PACKAGE_BLUEZ5_PLUGINS_NFC is not set # BR2_PACKAGE_BLUEZ5_PLUGINS_SAP is not set # BR2_PACKAGE_BLUEZ5_PLUGINS_SIXAXIS is not set # BR2_PACKAGE_TRANSMISSION_REMOTE is not set # BR2_PACKAGE_LIBKCAPI_APPS is not set # BR2_PACKAGE_MPLAYER is not set # BR2_PACKAGE_MPLAYER_MPLAYER is not set # BR2_PACKAGE_MPLAYER_MENCODER is not set # BR2_PACKAGE_LIBPLAYER_MPLAYER is not set # BR2_PACKAGE_IQVLINUX is not set # BR2_BINFMT_FLAT_SEP_DATA is not set # BR2_bfin is not set # BR2_PACKAGE_KODI_ADSP_BASIC is not set # BR2_PACKAGE_KODI_ADSP_FREESURROUND is not set # # Legacy options removed in 2018.02 # # BR2_KERNEL_HEADERS_3_4 is not set # BR2_KERNEL_HEADERS_3_10 is not set # BR2_KERNEL_HEADERS_3_12 is not set # BR2_BINUTILS_VERSION_2_27_X is not set # BR2_PACKAGE_EEPROG is not set # BR2_PACKAGE_GNUPG2_GPGV2 is not set # BR2_PACKAGE_IMX_GPU_VIV_APITRACE is not set # BR2_PACKAGE_IMX_GPU_VIV_G2D is not set # # Legacy options removed in 2017.11 # # BR2_PACKAGE_RFKILL is not set # BR2_PACKAGE_UTIL_LINUX_RESET is not set # BR2_PACKAGE_POLICYCOREUTILS_AUDIT2ALLOW is not set # BR2_PACKAGE_POLICYCOREUTILS_RESTORECOND is not set # BR2_PACKAGE_SEPOLGEN is not set # BR2_PACKAGE_OPENOBEX_BLUEZ is not set # BR2_PACKAGE_OPENOBEX_LIBUSB is not set # BR2_PACKAGE_OPENOBEX_APPS is not set # BR2_PACKAGE_OPENOBEX_SYSLOG is not set # BR2_PACKAGE_OPENOBEX_DUMP is not set # BR2_PACKAGE_AICCU is not set # BR2_PACKAGE_UTIL_LINUX_LOGIN_UTILS is not set # # Legacy options removed in 2017.08 # # BR2_TARGET_GRUB is not set # BR2_PACKAGE_SIMICSFS is not set # BR2_BINUTILS_VERSION_2_26_X is not set BR2_XTENSA_OVERLAY_DIR="" BR2_XTENSA_CUSTOM_NAME="" # BR2_PACKAGE_HOST_MKE2IMG is not set BR2_TARGET_ROOTFS_EXT2_BLOCKS=0 BR2_TARGET_ROOTFS_EXT2_EXTRA_INODES=0 # BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_CDXAPARSE is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_DATAURISRC is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_DCCP is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_HDVPARSE is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_MVE is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_NUVDEMUX is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_PATCHDETECT is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_SDI is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_TTA is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_VIDEOMEASURE is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_APEXSINK is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_SDL is not set # BR2_PACKAGE_GST1_PLUGINS_UGLY_PLUGIN_MAD is not set # BR2_STRIP_none is not set # BR2_PACKAGE_BEECRYPT_CPP is not set # BR2_PACKAGE_SPICE_CLIENT is not set # BR2_PACKAGE_SPICE_GUI is not set # BR2_PACKAGE_SPICE_TUNNEL is not set # BR2_PACKAGE_INPUT_TOOLS is not set # BR2_PACKAGE_INPUT_TOOLS_INPUTATTACH is not set # BR2_PACKAGE_INPUT_TOOLS_JSCAL is not set # BR2_PACKAGE_INPUT_TOOLS_JSTEST is not set # BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH is not set # BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86 is not set # BR2_GCC_VERSION_4_8_X is not set # # Legacy options removed in 2017.05 # # BR2_PACKAGE_SUNXI_MALI_R2P4 is not set # BR2_PACKAGE_NODEJS_MODULES_COFFEESCRIPT is not set # BR2_PACKAGE_NODEJS_MODULES_EXPRESS is not set # BR2_PACKAGE_BLUEZ5_UTILS_GATTTOOL is not set # BR2_PACKAGE_OPENOCD_FT2XXX is not set # BR2_PACKAGE_KODI_RTMPDUMP is not set # BR2_PACKAGE_KODI_VISUALISATION_FOUNTAIN is not set # BR2_PACKAGE_PORTMAP is not set # BR2_BINUTILS_VERSION_2_25_X is not set # BR2_TOOLCHAIN_BUILDROOT_INET_RPC is not set BR2_TARGET_ROOTFS_EXT2_EXTRA_BLOCKS=0 # BR2_PACKAGE_SYSTEMD_KDBUS is not set # BR2_PACKAGE_POLARSSL is not set # BR2_NBD_CLIENT is not set # BR2_NBD_SERVER is not set # BR2_PACKAGE_GMOCK is not set # BR2_KERNEL_HEADERS_4_8 is not set # BR2_KERNEL_HEADERS_3_18 is not set # BR2_GLIBC_VERSION_2_22 is not set # # Legacy options removed in 2017.02 # # BR2_PACKAGE_PERL_DB_FILE is not set # BR2_KERNEL_HEADERS_4_7 is not set # BR2_KERNEL_HEADERS_4_6 is not set # BR2_KERNEL_HEADERS_4_5 is not set # BR2_KERNEL_HEADERS_3_14 is not set # BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS is not set # BR2_UCLIBC_INSTALL_TEST_SUITE is not set # BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX is not set # BR2_PACKAGE_MAKEDEVS is not set # BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV7A is not set # BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV5TE is not set # BR2_PACKAGE_SNOWBALL_HDMISERVICE is not set # BR2_PACKAGE_SNOWBALL_INIT is not set # BR2_GDB_VERSION_7_9 is not set # # Legacy options removed in 2016.11 # # BR2_PACKAGE_PHP_SAPI_CLI_CGI is not set # BR2_PACKAGE_PHP_SAPI_CLI_FPM is not set # BR2_PACKAGE_WVSTREAMS is not set # BR2_PACKAGE_WVDIAL is not set # BR2_PACKAGE_WEBKITGTK24 is not set # BR2_PACKAGE_TORSMO is not set # BR2_PACKAGE_SSTRIP is not set # BR2_KERNEL_HEADERS_4_3 is not set # BR2_KERNEL_HEADERS_4_2 is not set # BR2_PACKAGE_KODI_ADDON_XVDR is not set # BR2_PACKAGE_IPKG is not set # BR2_GCC_VERSION_4_7_X is not set # BR2_BINUTILS_VERSION_2_24_X is not set # BR2_PACKAGE_WESTON_RPI is not set # BR2_LINUX_KERNEL_TOOL_CPUPOWER is not set # BR2_LINUX_KERNEL_TOOL_PERF is not set # BR2_LINUX_KERNEL_TOOL_SELFTESTS is not set # BR2_GCC_VERSION_4_8_ARC is not set # BR2_KERNEL_HEADERS_4_0 is not set # BR2_KERNEL_HEADERS_3_19 is not set # BR2_PACKAGE_LIBEVAS_GENERIC_LOADERS is not set # BR2_PACKAGE_ELEMENTARY is not set # BR2_LINUX_KERNEL_CUSTOM_LOCAL is not set # # Legacy options removed in 2016.08 # # BR2_PACKAGE_EFL_JP2K is not set # BR2_PACKAGE_SYSTEMD_COMPAT is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_LIVEADDER is not set # BR2_PACKAGE_LIBFSLVPUWRAP is not set # BR2_PACKAGE_LIBFSLPARSER is not set # BR2_PACKAGE_LIBFSLCODEC is not set # BR2_PACKAGE_UBOOT_TOOLS_MKIMAGE_FIT_SIGNATURE_SUPPORT is not set # BR2_PTHREADS_OLD is not set # BR2_BINUTILS_VERSION_2_23_X is not set # BR2_TOOLCHAIN_BUILDROOT_EGLIBC is not set # BR2_GDB_VERSION_7_8 is not set # # Legacy options removed in 2016.05 # # BR2_PACKAGE_OPENVPN_CRYPTO_POLARSSL is not set # BR2_PACKAGE_NGINX_HTTP_SPDY_MODULE is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_RTP is not set # BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_MPG123 is not set # BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC is not set # BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC_E500V2 is not set # BR2_x86_i386 is not set # BR2_PACKAGE_QT5QUICK1 is not set BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR="" # BR2_PACKAGE_XDRIVER_XF86_INPUT_VOID is not set # BR2_KERNEL_HEADERS_3_17 is not set # BR2_GDB_VERSION_7_7 is not set # BR2_PACKAGE_FOOMATIC_FILTERS is not set # BR2_PACKAGE_SAMBA is not set # BR2_PACKAGE_KODI_WAVPACK is not set # BR2_PACKAGE_KODI_RSXS is not set # BR2_PACKAGE_KODI_GOOM is not set # BR2_PACKAGE_SYSTEMD_ALL_EXTRAS is not set # BR2_GCC_VERSION_4_5_X is not set # BR2_PACKAGE_SQLITE_READLINE is not set # # Legacy options removed in 2016.02 # # BR2_PACKAGE_DOVECOT_BZIP2 is not set # BR2_PACKAGE_DOVECOT_ZLIB is not set # BR2_PACKAGE_E2FSPROGS_FINDFS is not set # BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL is not set # BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE is not set # BR2_PACKAGE_OPENPOWERLINK_LIBPCAP is not set # BR2_LINUX_KERNEL_SAME_AS_HEADERS is not set # BR2_PACKAGE_CUPS_PDFTOPS is not set # BR2_KERNEL_HEADERS_3_16 is not set # BR2_PACKAGE_PYTHON_PYXML is not set # BR2_ENABLE_SSP is not set # BR2_PACKAGE_DIRECTFB_CLE266 is not set # BR2_PACKAGE_DIRECTFB_UNICHROME is not set # BR2_PACKAGE_LIBELEMENTARY is not set # BR2_PACKAGE_LIBEINA is not set # BR2_PACKAGE_LIBEET is not set # BR2_PACKAGE_LIBEVAS is not set # BR2_PACKAGE_LIBECORE is not set # BR2_PACKAGE_LIBEDBUS is not set # BR2_PACKAGE_LIBEFREET is not set # BR2_PACKAGE_LIBEIO is not set # BR2_PACKAGE_LIBEMBRYO is not set # BR2_PACKAGE_LIBEDJE is not set # BR2_PACKAGE_LIBETHUMB is not set # BR2_PACKAGE_INFOZIP is not set # BR2_BR2_PACKAGE_NODEJS_0_10_X is not set # BR2_BR2_PACKAGE_NODEJS_0_12_X is not set # BR2_BR2_PACKAGE_NODEJS_4_X is not set # # Legacy options removed in 2015.11 # # BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_REAL is not set # BR2_PACKAGE_MEDIA_CTL is not set # BR2_PACKAGE_SCHIFRA is not set # BR2_PACKAGE_ZXING is not set # BR2_PACKAGE_BLACKBOX is not set # BR2_KERNEL_HEADERS_3_0 is not set # BR2_KERNEL_HEADERS_3_11 is not set # BR2_KERNEL_HEADERS_3_13 is not set # BR2_KERNEL_HEADERS_3_15 is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_ANDI is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_BLTLOAD is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_CPULOAD is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_DATABUFFER is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_DIOLOAD is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_DOK is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_DRIVERTEST is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_FIRE is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_FLIP is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_FONTS is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_INPUT is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_JOYSTICK is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_KNUCKLES is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_LAYER is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_MATRIX is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_MATRIX_WATER is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_NEO is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_NETLOAD is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_PALETTE is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_PARTICLE is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_PORTER is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_STRESS is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_TEXTURE is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_VIDEO is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_VIDEO_PARTICLE is not set # BR2_PACKAGE_DIRECTFB_EXAMPLES_WINDOW is not set # BR2_PACKAGE_KOBS_NG is not set # BR2_PACKAGE_SAWMAN is not set # BR2_PACKAGE_DIVINE is not set # # Legacy options removed in 2015.08 # # BR2_PACKAGE_KODI_PVR_ADDONS is not set # BR2_BINUTILS_VERSION_2_23_2 is not set # BR2_BINUTILS_VERSION_2_24 is not set # BR2_BINUTILS_VERSION_2_25 is not set # BR2_PACKAGE_PERF is not set # BR2_BINUTILS_VERSION_2_22 is not set # BR2_PACKAGE_GPU_VIV_BIN_MX6Q is not set # BR2_TARGET_UBOOT_NETWORK is not set
再从 tina sdk 替换三个文件就可以了:
cp /opt/D1/tina_d1_open/lichee/brandy-2.0/u-boot-2018/u-boot-sun20iw1p1.bin output/images/u-boot-sun20iw1p1.bin cp /opt/D1/tina_d1_open/lichee/linux-5.4/arch/riscv/boot/dts/sunxi/board.dtb output/images/board.dtb cp /opt/D1/tina_d1_open/lichee/linux-5.4/arch/riscv/boot/Image output/images/Image
-
找了几行 Qt widgets 刷新率测试的代码试一试。
-
# /tmp/sda/qt_fps_test -platform linuxfb time: 135.000000 fps: 7.407407 time: 147.000000 fps: 6.802721 time: 175.000000 fps: 5.714286 time: 175.000000 fps: 5.714286 time: 175.000000 fps: 5.714286 time: 176.000000 fps: 5.681818 time: 175.000000 fps: 5.714286 time: 179.000000 fps: 5.586592
啊这,全屏画线这刷新率有点低。
-
用 Qt widgets 的 FillRect() 矩形填充,屏幕会上下撕裂,不知道啥原因。
-
[图片]
为啥我的弄完是这个样子 -
我的麻雀板子用这个屏幕是花屏啊大佬
-
@tigger 想起来是不是需要double buffer
-
大佬你UBOOT卡死的时候是怎么解决的,是改了UBOOT设备树里面的时序参数吗?
-
@a1147991965 当时记得有一个限制,就是spw不得小于等于3,否则卡住。你具体检查下hspw,vspw
-
@mangogeek 这个限制是驱动代码限制的嘛?
-
@a1147991965 还没细查
-
转接板,有没有多余的可以挂淘宝上卖呢。单独去打样有点贵。
-
@mangogeek 请教大佬,这块5.0的屏幕,我买了同款。现在想移植到一块新板子上,请问可否指导一下,i2c命令的详细数据,或者可否告知内核驱动的文件?
-
这里有逻辑分析仪抓到的数据: https://bbs.aw-ol.com/topic/263/share/15
这里有i2c数据生成软件: https://bbs.aw-ol.com/topic/263/share/35
-
@whycan 感谢,我参照这俩进行了处理,test模式也起不来,所以就想跟您确认一下。如果你们在i2c参数上没有做特殊处理,那可能是我i2c的实现逻辑(FPGA)有问题,感谢!
-
此回复已被删除! -
@mangogeek 大佬,你就只改了设备树吗,为什么我改完屏幕背光都不亮?
-
@ttg2577 这个屏的背光是上电自动亮的啊。
是不是线接反了?还是屏背光坏了? -
@aozima 不知道啊,就只是上电的一瞬间亮一下,然后就黑屏了,按背光按键也没用。
-
@whycan 晕哥,这个屏我买了一个5.0寸的,麻雀开发板只改设备树里的屏参和mipi配置就可以么
-
@wjp2547532
屏幕是哪里的呢? -
@whycan 额,就是帖子中的这个屏,我买的5寸的
-
-
@wjp2547532
对,在 nezha 板级文件上面改 dts 即可。 -
@whycan 好的晕哥,多谢多谢
-
@ttg2577 在 使用D1-H驱动树莓派DSI屏幕 中说:
@aozima 不知道啊,就只是上电的一瞬间亮一下,然后就黑屏了,按背光按键也没用。
你后来屏幕正常吗,我买了一块也是上点瞬间亮一下就黑屏
-
只需要修改设备树就行吗,驱动都不用更改?
&lcd0 { lcd_used = <1>; lcd_driver_name = "tft08006"; lcd_backlight = <100>; lcd_if = <4>; lcd_x = <800>; //lcd_y = <1280>; lcd_y = <480>; lcd_width = <52>; lcd_height = <52>; //lcd_dclk_freq = <70>; lcd_dclk_freq = <26>; lcd_pwm_used = <1>; lcd_pwm_ch = <2>; lcd_pwm_freq = <1000>; lcd_pwm_pol = <0>; lcd_pwm_max_limit = <255>; // lcd_hbp = <32>; // lcd_ht = <868>; // lcd_hspw = <4>; // lcd_vbp = <12>; // //lcd_vt = <1311>; // lcd_vt = <500>; // lcd_vspw = <4>; lcd_ht = <857>; lcd_hbp = <40>; lcd_hspw = <4>; lcd_vt = <528>; lcd_vbp = <31>; //lcd_vt = <1311>; lcd_vspw = <4>; lcd_dsi_if = <0>; //lcd_dsi_lane = <4>; lcd_dsi_lane = <1>; lcd_lvds_if = <0>; lcd_lvds_colordepth = <0>; lcd_lvds_mode = <0>; lcd_frm = <0>; lcd_hv_clk_phase = <0>; lcd_hv_sync_polarity= <0>; lcd_io_phase = <0x0000>; lcd_gamma_en = <0>; lcd_bright_curve_en = <0>; lcd_cmap_en = <0>; lcd_fsync_en = <0>; lcd_fsync_act_time = <1000>; lcd_fsync_dis_time = <1000>; lcd_fsync_pol = <0>; deu_mode = <0>; lcdgamma4iep = <22>; smart_color = <90>; lcd_gpio_0 = <&pio PG 13 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&dsi4lane_pins_a>; pinctrl-1 = <&dsi4lane_pins_b>; };
修改完成后,屏幕还是不亮
-
@tigger 33fps 有没有用到G2D加速
-
对接的FB接口吗
Copyright © 2023 深圳全志在线有限公司 粤ICP备2021084185号 粤公网安备44030502007680号