Yuzukilizard V851S autostart settings

sergpenshin LV 4

Hi.
would tell me please (show an example) how to configure the system so that the required executable file is launched at system startup.

whycan晕哥 LV 9

@sergpenshin

add some command at the end of target/allwinner/{target-board}/busybox-init-base-files/etc/init.d/rc.final

在此文件的最后添加需要开机执行的命令： target/allwinner/{target-board}/busybox-init-base-files/etc/init.d/rc.final

sergpenshin LV 4

@whycan
Thank you. Yes indeed, in this way it works.
But can it be done as Init Scripts?
I tried to create a script in init.d

#!/bin/sh /etc/rc.common
# Example script
# Copyright (C) 2007 OpenWrt.org

START=41
STOP=15

start()
{
echo start
my_example
}
stop()
{
echo stop
killall my_example
}

Further

/etc/init.d/my_example enable

Then I made a reboot - but my_example did not start.
At the same time, the script itself is working, if execute

/etc/init.d/my_example start

everything works. Apparently I did something wrong. Please help me find the error!

vejoker LV 5

@sergpenshin
Rename my_example to S99my_example, then run /etc/init.d/S99my_example enable, and try rebooting

重命名 my_example 为 S99my_example
/etc/init.d/S99my_example enable
然后 reboot 重启试试