Allwinner Mass production start card making tutorial

[BedRock]

Regarding the Allwinner startup card, there are two ways to make it.

Allwinner provides a variety of tools and methods for user firmware burning.This article introduces the production method of mass production startup card.

1.Use Allwinner PhoenixCard Tool

Tool download link：https://www.aw-ol.com/downloads?cat=5
We find "PhoenixCardv4.2.7.7z" and click to download, and get a "PhoenixCardv4.2.7.7z.7z" file，and use an unzip tool to unzip it.We open the application PhoenixCard.exe.

The application interface is as follows:

If you insert an SD card into your computer, the software interface is as follows.

Now,you can choose the firmware that needs mass production.Follow the steps on the way to select and download.

After clicking download, just wait for the end of the burning process.The following message will be output in the message bar:

[cube_work]

six six six

[BedRock]

2. Use the dd command in Linux

The dd command is a standard command for linux to burn images.

Insert the SD card in your computer, check the SD card mount directory, and cancel the mount.

df -h
Filesystem                 Size  Used Avail Use% Mounted on
udev                        32G  4.0K   32G   1% /dev
tmpfs                      6.3G   35M  6.3G   1% /run
/dev/sda1                   83G   20G   59G  26% /
/dev/sdc                  30.2G  4.0K 30.2G   0% /media/SDCARD

umount /dev/sdc 

Find the img that needs to be downloaded.

sudo dd if=tina_d1-nezha_card0.img of=/dev/sdc bs=4M

[a1147991965]

bedrock
Forever Di God

[uuuuid]

sudo dd if=tina_d1-nezha_card0.img of=/dev/sdc bs=4M

yong zhege mingling kongpa buxing ba ?

英译汉 =>

用 这个 命令 恐怕 不行 吧？

[BedRock]

@uuuuid why？

[tigger]

@bedrock 确实不行，只能用 PhoenixCard.exe 烧。

[BedRock]

@tigger 用cardimg 也不行吗？需要打包成cardimg

[xiaowenge]

hi~Everybody, there is english discussion zone, please use english.

[uuuuid]

@bedrock

how to build tina_d1-nezha_card0.img ?

[BedRock]

@uuuuid
Specify the parameters for the pack -d

pack -d card0

Unfortunately, the card packaging tool is still not perfect.