【Take Care】The differences between Nezha and Raspberry Pi
BedRock LV 6 last edited by xiaowenge
The D1 Nehza and noticedthat despite the Nehza having connectors that appear identical to the Raspberry Pi, they actually are not 100% compatible.
The GPIO header is mostly compatible. Some of the higher numbered pins are listed in the datasheet as NC, meaning that some GPIOI are lacking. Furthermore, some of the secondary peripheral functions seem different.
The Display ribbon cable connector is not physically compatible. It is still a MIPI-DSI connection, but the pinout is different. A adapter will be needed to use it with the Raspberry Pi Display.
The "Camera" ribbon cable connector is not compatible at all. On the Nehza it is not actually a camera connector, but instead analog and digital connections for a microphone breakout board. There is no MIPI-CSI capability on the connector (from what I can tell, the only MIPI-CSI connection shares pins with the RGMII connection, which is used for ethernet)
The 3.5mm audio jack is not entirely compatible. There is not an analog video out connection, instead there is a microphone input.
Be sure to check the schematics (I found them on the linux-sunix wiki), before trying to use any Raspberry Pi cessories to be sure you will not break anything.
—Copied From Gabe R .Thank you for pointing out ！
- 转自开发者Gabe R ，感谢指出提醒 ！
cube_work LV 5 last edited by
Nehza or Nezha