T113-S3TF卡启动稳定
-
如下日志信息,TF卡外设为SDC0,提示can't find node "mmc0",请问是哪里出的问题
Boot 2018.05 (Oct 25 2023 - 16:45:43 +0800) Allwinner Technology [00.491]CPU: Allwinner Family [00.494]Model: sun8iw20 [00.496]DRAM: 128 MiB [00.499]Relocation Offset is: 04ebc000 [00.525]secure enable bit: 0 [00.527]smc_tee_inform_fdt failed with: -65526[00.531]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz MBus=300Mhz [00.538]gic: sec monitor mode [00.540]flash init start [00.543]workmode = 0,storage type = 1 [00.546][mmc]: mmc driver ver uboot2018:2021-12-20 13:35:00 [00.551][mmc]: get sdc_type fail and use default host:tm1. [00.557][mmc]: can't find node "mmc0",will add new node [00.562][mmc]: fdt err returned <no error> [00.566][mmc]: Using default timing para [00.570][mmc]: SUNXI SDMMC Controller Version:0x50310 [00.587][mmc]: card_caps:0x3000000a [00.590][mmc]: host_caps:0x3000003f [00.593]sunxi flash init ok [00.596]line:703 init_clocks [00.599]drv_disp_init request pwm success, pwm7:pwm7:0x2000c00. fdt get node offset faill: hdmi [00.615]unable to map hdmi registers [00.618]drv_disp_init finish [00.651]Loading Environment from SUNXI_FLASH... OK [00.672]boot_gui_init:start [00.675]set disp.dev2_output_type fail. using defval=0 [00.681]boot_gui_init:finish partno erro : can't find partition bootloader 54 bytes read in 4 ms (12.7 KiB/s) [00.698]bmp_name=bootlogo.bmp size 38454 38454 bytes read in 7 ms (5.2 MiB/s) [00.725]Item0 (Map) magic is bad [00.728]the secure storage item0 copy0 magic is bad [00.744]Item0 (Map) magic is bad [00.747]the secure storage item0 copy1 magic is bad [00.752]Item0 (Map) magic is bad [00.755]out of usb burn from boot: not need burn key List file under ULI/factory ** Unrecognized filesystem type ** root_partition is rootfs set root to /dev/mmcblk0p5 [00.774]update part info [00.779]update bootcmd [00.786]change working_fdt 0x43e7be70 to 0x43e5be70 disable nand error: FDT_ERR_BADPATH [00.806]update dts Hit any key to stop autoboot: 1 FDT ERROR:get muxsel err returned FDT_ERR_INTERNAL sunxi_pwm_pin_set_state, fdt_set_all_pin, ret=-1 [00.871]LCD open finish 0 [02.020]no vendor_boot partition is found Android's image name: t113-100ask_pro [02.032]Starting kernel ... [02.034][mmc]: MMC Device 2 not found [02.038][mmc]: mmc 2 not find, so not exit
-
-
@awwwwa 谢谢,已解决
Copyright © 2023 深圳全志在线有限公司 粤ICP备2021084185号 粤公网安备44030502007680号