aaa0557li 发布的帖子

@awwwwa 我就是851 刷的851

[356]HELLO! BOOT0 is starting!
[359]BOOT0 commit : 2a3ec52022
[362]set pll start
[364]periph0 has been enabled
[367]set pll end

[2024-11-25 15:41:36.846]# RECV ASCII>
[442][pmu]: bus read error
[445]board init ok
[447]DRAM use internal ZQ!!
[450]ZQ value = 0x30
[452]bootinfo error1
[454]ic cant match axp, please check...
[457]init dram fail
C

[2024-11-25 15:41:37.370]# RECV ASCII>
C

[2024-11-25 15:41:37.868]# RECV ASCII>
C

@awwwwa 我确实我是设置过GIT名称的，但是还是提示我没设置

@awwwwa Downloading Repo source from https://mirrors.bfsu.edu.cn/git/git-repo
remote: Enumerating objects: 8994, done.
remote: Counting objects: 100% (5211/5211), done.
remote: Compressing objects: 100% (2599/2599), done.
remote: Total 8994 (delta 5003), reused 2612 (delta 2612), pack-reused 3783
Receiving objects: 100% (8994/8994), 3.05 MiB | 15.88 MiB/s, done.
Resolving deltas: 100% (6246/6246), done.
repo: Updating release signing keys to keyset ver 2.3

Traceback (most recent call last):
  File "/home/allwinner/tina-v853-open/.repo/repo/main.py", line 874, in <module>
    _Main(sys.argv[1:])
  File "/home/allwinner/tina-v853-open/.repo/repo/main.py", line 850, in _Main
    result = repo._Run(name, gopts, argv) or 0
  File "/home/allwinner/tina-v853-open/.repo/repo/main.py", line 294, in _Run
    result = run()
  File "/home/allwinner/tina-v853-open/.repo/repo/main.py", line 275, in <lambda>
    lambda: self._RunLong(name, gopts, argv, git_trace2_event_log) or 0
  File "/home/allwinner/tina-v853-open/.repo/repo/main.py", line 442, in _RunLong
    execute_command()
  File "/home/allwinner/tina-v853-open/.repo/repo/main.py", line 408, in execute_command
    execute_command_helper()
  File "/home/allwinner/tina-v853-open/.repo/repo/main.py", line 374, in execute_command_helper
    result = cmd.Execute(copts, cargs)
  File "/home/allwinner/tina-v853-open/.repo/repo/subcmds/init.py", line 406, in Execute
    self._ConfigureUser(opt)
  File "/home/allwinner/tina-v853-open/.repo/repo/subcmds/init.py", line 217, in _ConfigureUser
    name = self._Prompt("Your Name", mp.UserName)
  File "/home/allwinner/tina-v853-open/.repo/repo/project.py", line 779, in UserName
    self._LoadUserIdentity()
  File "/home/allwinner/tina-v853-open/.repo/repo/project.py", line 792, in _LoadUserIdentity
    u = self.bare_git.var("GIT_COMMITTER_IDENT")
  File "/home/allwinner/tina-v853-open/.repo/repo/project.py", line 3842, in runner
    p.Wait()
  File "/home/allwinner/tina-v853-open/.repo/repo/git_command.py", line 556, in Wait
    self.VerifyCommand()
  File "/home/allwinner/tina-v853-open/.repo/repo/git_command.py", line 546, in VerifyCommand
    raise GitCommandError(
git_command.GitCommandError: GitCommandError: 'var GIT_COMMITTER_IDENT' on manifests failed
stderr: 
*** Please tell me who you are.

Run

  git config --global user.email "you@example.com"
  git config --global user.name "Your Name"

to set your account's default identity.
Omit --global to set the identity only in this repository.

有人遇到类似的问题吗

请问怎么查看等级的

购买了TinyVision套件简述，然后尝试着跑一下AI，之前用的MTK的芯片，学习一下，丰富自己的指示

@jerry_weng 等级怎么查看

@xiaowenge 在 【水经验混下载权限专用贴】如何升级LV2拉取SDK 中说：

你有没有发现你已经LV2了
当你知道这个论坛，随便点了个赞或者发了个帖子，就会升LV2
一般来说新号回复四个帖子就能升级lv2
为什么这样设置呢？
因为我们AWOL社区的伙伴主要是中小企业和个人开发者，由于其数量庞大，我们可能难以每一个人都手把手教学开发，所以希望大家都知道我们论坛，有什么问题可以在论坛提问，大家互助解决问题（当然也有工程师巡场

好的