Re: 100ASK-V853-PRO开发板支持yolov5模型部署
after this command:
pegasus export ovxlib --model yolov5s-sim.json --model-data yolov5s-sim.data --dtype quantized --model-quantize yolov5s-sim.quantize --batch-size 1 --save-fused-graph --target-ide-project 'linux64' --with-input-meta yolov5s-sim_inputmeta.yml --output-path ovxilb/yolov5s-sim/yolov5s-simprj --pack-nbg-unify --postprocess-file yolov5s-sim_postprocessmeta.yml --optimize "VIP9000PICO_PID0XEE" --viv-sdk ${VIV_SDK}
this error shows
@bit8lab where did you install pegasus from ?, tell me the source you installed it from.
@amirhos_esm ./sample_rtsp -path /usr/bin/sample_rtsp_sc1718v_eth.conf
I want to use rtsp to object detection and view result on vlc so I choose and try sampleIPC but not working where is problem ?
THIS IS MY .CONF FILE
########### paramter (ref to tulip_cedarx.conf)############
[parameter]
rtsp_net_type = 1 #RTSP Network type, 0: "lo", 1: "eth0", 2: "br0", 3: "wlan0"
stream_buf_size = 0 #0:default 1/10*yuv420, unit:bytes
test_duration = 0 #unit:s, 0:Infinite duration.
main_isp = 0
main_vipp = 0
main_src_width = 1920
main_src_height = 1080
main_pixel_format = "aw_lbc_2_0x" #nv21,nv12,yu12,yv12;aw_lbc_2_5x,aw_lbc_2_0x,aw_lbc_1_5x,aw_lbc_1_0x
main_wdr_enable = 0
main_vi_buf_num = 3
main_src_frame_rate = 20 #fps
main_viChn = 0 #-1:disale main stream
main_venc_chn = 0 #-1:disale main stream
main_encode_type = "H.265"
main_encode_width = 2304 #1280x720->720p, 1920x1080->1080p, 2304x1296->3M, 2560×1440->2k, 3840x2160->4k, 7680x4320->8k
main_encode_height = 1296
main_encode_frame_rate = 20 #fps
main_encode_bitrate = 1572864 #5M:5242880, 2M:2097152, 1.5M:1572864, 1M:1048576
main_file_path = #"/mnt/extsd/mainStream.raw" #if no path is specified, it will not be saved.
main_online_en = 0
main_online_share_buf_num = 2
main_encpp_enable = 1
sub_isp = 0
sub_vipp = 4
sub_src_width = 640
sub_src_height = 360
sub_pixel_format = "aw_lbc_2_0x" #nv21,nv12,yu12,yv12;aw_lbc_2_5x,aw_lbc_2_0x,aw_lbc_1_5x,aw_lbc_1_0x
sub_wdr_enable = 0
sub_vi_buf_num = 3
sub_src_frame_rate = 20 #fps
sub_vipp_crop_en = 1
sub_vipp_crop_rect_x = 0
sub_vipp_crop_rect_y = 0
sub_vipp_crop_rect_w = 1888
sub_vipp_crop_rect_h = 1072
sub_viChn = 0 #-1:disale sub stream
sub_venc_chn = 1 #-1:disale sub stream
sub_encode_type = "H.264"
sub_encode_width = 640 #1280x720->720p, 1920x1080->1080p, 2560×1440->2k, 3840x2160->4k, 7680x4320->8k
sub_encode_height = 360
sub_encode_frame_rate = 20 #fps
sub_encode_bitrate = 256000 #5M:5242880, 2M:2097152, 1M:1048576, 0.5M:512000
sub_file_path = #"/mnt/extsd/subStream.raw" #if no path is specified, it will not be saved.
sub_encpp_enable = 1
sub_lapse_viChn = 1 #-1:disale sub lapse stream
sub_lapse_venc_chn = 2 #-1:disale sub lapse stream
sub_lapse_encode_type = "H.264"
sub_lapse_encode_width = 640 #1280x720->720p, 1920x1080->1080p, 2560×1440->2k, 3840x2160->4k, 7680x4320->8k
sub_lapse_encode_height = 360
sub_lapse_encode_frame_rate = 20 #fps
sub_lapse_encode_bitrate = 256000 #5M:5242880, 2M:2097152, 1M:1048576, 0.5M:512000
sub_lapse_file_path = #"/mnt/extsd/subLapseStream.raw" #if no path is specified, it will not be saved.
sub_lapse_time = 1000000 #unit:us
sub_lapse_encpp_enable = 1
isp_ve_linkage_enable = 1
camera_adaptive_moving_and_static_enable = 0
ve_lens_moving_max_qp = 40
wb_yuv_enable = 0
wb_yuv_buf_num = 1
wb_yuv_start_index = 0
wb_yuv_total_cnt = 10
wb_yuv_stream_channel = 0 #0:main stream, 1:sub stream, 2:sub lapse stream
wb_yuv_file_path = "/mnt/extsd/wb_yuv.yuv"
AND THIS ERROR OUT :
root@TinaLinux:/mnt/extsd# /mnt/extsd/sample_rtsp -path /mnt/extsd/sample_rtsp.c
onf
WARNING: Logging before InitGoogleLogging() is written to STDERR
I0101 03:24:53.447822 1281 sample_rtsp.c:92] <ParseCmdLine> sample virvi2venc path:[/mnt/extsd/sample_rtsp], arg number is [3]
I0101 03:24:53.450302 1281 confparser.c:60] <createConfParser> load conf file /mnt/extsd/sample_rtsp.conf ok!
I0101 03:24:53.451141 1281 sample_rtsp.c:291] <loadSampleConfig> IspAndVeLinkageEn:1, AdaptEn:0, LensMoveMaxQp:40
Committed_AS: 5532 kB
I0101 03:24:53.459729 1281 mpi_sys.c:842] <AW_MPI_SYS_SetConf> kfctmpdir is [/tmp]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Media Process Platform<<<<<<<<<<<<<<<<<<<<<<<<<<<<
modName : MPP-Platform
tag : V1.0 Release
branch: v5-dev
commit: 4eed413532ad87725895a8cb1ba75e22fc328233
date : 20170725
author: jenkins
iniparser: cannot open /etc/cedarx.conf
iniparser: cannot open /vendor/etc/cedarx.conf
I0101 03:24:53.463345 1281 mpi_sys.c:1455] <AW_MPI_SYS_Init> ISP init
I0101 03:24:53.464116 1281 isp_version.h:39] <isp_version_info> [ISP]>>>>>>>>>>>>>>>>>>>> ISP VERSION INFO <<<<<<<<<<<<<<<<<<<
IPCORE: ISP600
branch: libisp-dev
commit: 5b30d9b8f8190196d863bc91576af5356022b433
date : Thu Jan 25 17:23:23 2024 +0800
author: <mayifei@allwinnertech.com>
--------------------------------------------------------
I0101 03:24:53.464788 1281 mpi_sys.c:1457] <AW_MPI_SYS_Init> ISP init done
I0101 03:24:53.465759 1281 hwdisplay.c:84] <hw_display_init>
I0101 03:24:53.466227 1281 hwdisplay.c:993] <hwd_init> (hwd_init 993)
I0101 03:24:53.466883 1281 hwdisplay.c:1048] <hwd_init> ret[0][2,0]ch[0]lyl[0] init: enable[0], screenwin[0,0, 0x0], zorder[0], alpha[mode:0, value:0]
I0101 03:24:53.490072 1281 audio_hw.c:189] <MakeAllMixerElemsAvailable> pcm open and close, all MixerElems maybe exist.
I0101 03:24:53.490593 1281 alsa_interface.c:712] <alsaOpenMixer> open mixer:hw:0
I0101 03:24:53.492970 1281 alsa_interface.c:767] <alsaOpenMixer> set playback vol_val to value: 27
I0101 03:24:53.493490 1281 alsa_interface.c:712] <alsaOpenMixer> open mixer:hw:1
I0101 03:24:53.494908 1281 sample_rtsp.c:422] <configMainStream> main vipp0 ve_online_en:0, dma_buf_num:0, venc ch0 OnlineEnable:0, OnlineShareBufNum:0
I0101 03:24:53.495407 1281 sample_rtsp.c:449] <configMainStream> main EncppSharpAttenCoefPer: 100%
I0101 03:24:53.495558 1281 sample_rtsp.c:463] <configMainStream> main vbvThreshSize: 147450, vbvBufSize: 933882
I0101 03:24:53.496132 1281 video.c:107] <video_init> [ISP]video device name is vin_video0
I0101 03:24:53.496365 1281 isp_dev.c:566] <isp_video_open> [ISP]open video device[0], detect isp0 success!
I0101 03:24:53.497176 1281 video.c:1063] <video_set_isp_bk_buffer_align> [ISP]video_set_isp_bk_buffer_align yuv_align_en = 0, lbc_align_en = 1
E0101 03:24:53.497363 1281 video.c:1065] <video_set_isp_bk_buffer_align> [ISP_ERR]video0 video_set_isp_bk_buffer_align failed!!!
I0101 03:24:53.497919 1281 videoInputHw.c:1104] <videoInputHw_SetChnAttr> ViCh[0] LBC pix:0x3132434c, line_tar_bits[0]:9216, line_tar_bits[1]:13824
I0101 03:24:53.499319 1281 videoInputHw.c:1124] <videoInputHw_SetChnAttr> bs_len:61440, frm_bit:11520
I0101 03:24:53.499939 1286 mpi_sys.c:1073] <MonitorEnvVarThread> detect user environment:
I0101 03:24:53.501282 1286 mpi_sys.c:1074] <MonitorEnvVarThread> /tmp/mpp_log_level
I0101 03:24:53.501455 1286 mpi_sys.c:1075] <MonitorEnvVarThread> /tmp/mpp_venc_sei_config_param
I0101 03:24:53.749066 1281 video.c:172] <video_set_fmt> [ISP]video0 fd[9] ve_online_en=0, dma_buf_num=0
I0101 03:24:53.756470 1281 isp_dev.c:390] <isp_tdm_open> [ISP]tdm_rx device name is sunxi_tdm_rx.0
I0101 03:24:53.757127 1281 isp_dev.c:460] <isp_dev_open> [ISP]open isp device[0] success!
E0101 03:24:53.757316 1281 isp_dev.c:956] <isp_sensor_get_configs> [ISP_ERR]gc2053_mipi get config failed: Invalid argument (22).
W0101 03:24:53.758671 1281 isp_helper.c:106] <isp_ctx_save_init> [ISP_WARN]open /mnt/extsd/isp0_0_0_0_0_gc2053_mipi_ctx_saved.bin failed, err:No such file or directory.
I0101 03:24:53.758980 1281 isp_ini_parse.c:1650] <parser_ini_info> [ISP]prefer isp config: [gc2053_mipi], 0x0, 0, 0, 0
W0101 03:24:53.759608 1281 isp_ini_parse.c:1669] <parser_ini_info> [ISP_WARN]cannot find gc2053_mipi_0_0_0_0_0 isp config, use gc2053_mipi_1920_1088_20_0_0 -> [gc2053_mipi_isp600_20220511_164617_vlc4_day]
E0101 03:24:53.762955 1281 isp_manage.c:2575] <isp_ctx_config_init> [ISP_ERR]sensor attribute is not init.
I0101 03:24:53.763580 1281 isp.c:1235] <isp_run> [ISP]create isp0 server thread!
E0101 03:24:53.765018 1285 isp_dev.c:956] <isp_sensor_get_configs> [ISP_ERR]gc2053_mipi get config failed: Invalid argument (22).
W0101 03:24:53.765190 1285 videoInputHw.c:6258] <VideoInputHw_CapThread> fatal error! Get isp[0] sensor information failed! must be called AW_MPI_ISP_Run before AW_MPI_VI_EnableVipp.
I0101 03:24:53.767622 1285 videoInputHw.c:6297] <VideoInputHw_CapThread> EnableVipp[0]: vfmt.bufs:3, online:0
E0101 03:24:53.770593 1287 isp_dev.c:718] <isp_dev_start> [ISP_ERR]unable to subscribe to tdm event: Not a tty (25).
I0101 03:24:53.798774 1281 videoInputHw.c:1316] <videoInputHw_ChnEnable> receive enable vipp[0] reply: 0x0!
iniparser: cannot open /etc/cedarc.conf
iniparser: cannot open /etc/cedarc.conf
INFO : cedarc <cdc_log_set_level:43>: Set log level to 3 from /vendor/etc/cedarc.conf
DEBUG : cedarc <LogVersionInfo:44>:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cedar Codec <<<<<<<<<<<<<<<<<<<<<<<<<<<<
tag :
branch: tina-v853-dev
commit: 3975729c81dab9f05e2722e09e64d018b4b03c44
date : Sat Jan 27 15:33:52 2024 +0800
author: chenyibin
change-id : I1798fdb3cfa479b7f3eabb212078a906cbe503eb
release_author : ericwang
patch :
----------------------------------------------------------------------
DEBUG : cedarc <VEncoderRegister:1022>: 1117 register 2:h264
DEBUG : cedarc <VEncoderRegister:1032>: register codec: '2:h264' success.
INFO : cedarc <CedarPluginVENCInit_h264:13347>: register h264 encoder success!
DEBUG : cedarc <VEncoderRegister:1022>: 1117 register 3:h265
DEBUG : cedarc <VEncoderRegister:1032>: register codec: '3:h265' success.
INFO : cedarc <CedarPluginVENCInit_h265:14107>: register h265 encoder success!
DEBUG : cedarc <VEncoderRegister:1022>: 1117 register 1:jpeg
DEBUG : cedarc <VEncoderRegister:1032>: register codec: '1:jpeg' success.
INFO : cedarc <CedarPluginVENCInit_jpeg:3199>: register jpeg encoder success!
DEBUG : cedarc <VeInitialize:1138>: shutdown power up ve
INFO : cedarc <VeInitialize:1172>: *** ic_version = 0x1302000023010,
iniparser: cannot open /etc/cedarc.conf
DEBUG : cedarc <CdcIniParserInit:36>: cannot parse file: /etc/cedarc.conf
DEBUG : cedarc <VeInitialize:1186>: bUseProcessLock = 0, eVeHwLockType = 0
DEBUG : cedarc <VeInitialize:1226>: *** nPhyOffset = 0x0
DEBUG : cedarc <VeSetSpeed:1734>: *** set ve freq to 400 Mhz ***
DEBUG : cedarc <VeInitialize:1281>: ve init ok
DEBUG : ionAlloc <__GetIonMemOpsS:965>: *** get __GetIonMemOpsS ***
DEBUG : ionAlloc <ion_alloc_open:140>: begin ion_alloc_open
DEBUG : ionAlloc <ion_alloc_open:173>: get offset by ve
INFO : cedarc <VeInitialize:1172>: *** ic_version = 0x1302000023010,
iniparser: cannot open /etc/cedarc.conf
DEBUG : cedarc <CdcIniParserInit:36>: cannot parse file: /etc/cedarc.conf
DEBUG : cedarc <VeInitialize:1186>: bUseProcessLock = 0, eVeHwLockType = 0
DEBUG : cedarc <VeInitialize:1226>: *** nPhyOffset = 0x0
DEBUG : cedarc <VeSetSpeed:1734>: *** set ve freq to 400 Mhz ***
DEBUG : cedarc <VeInitialize:1281>: ve init ok
DEBUG : ionAlloc <ion_alloc_open:182>: ** phy offset = 0
DEBUG : cedarc <VeRelease:1334>: ve release ok
DEBUG : cedarc <CdcMessageQueueCreate:47>: nMessageSize = 20
DEBUG : cedarc <H265SetParameter:13635>: VENC_IndexParamProductCase: 0
I0101 03:24:53.827952 1281 VideoEnc_Component.c:7350] <VideoEncComponentTunnelRequest> set inputPortTunnelFlag = TRUE
I0101 03:24:53.828115 1281 sample_rtsp.c:583] <configSubStream> vipp[4] crop en:1 X:0 Y:0 W:1888 H:1072
I0101 03:24:53.828195 1281 sample_rtsp.c:596] <configSubStream> sub EncppSharpAttenCoefPer: 33%
I0101 03:24:53.828260 1281 sample_rtsp.c:610] <configSubStream> sub vbvThreshSize: 24000, vbvBufSize: 152000
I0101 03:24:53.828396 1281 video.c:107] <video_init> [ISP]video device name is vin_video4
I0101 03:24:53.828618 1281 isp_dev.c:566] <isp_video_open> [ISP]open video device[4], detect isp0 success!
I0101 03:24:53.828803 1281 video.c:1063] <video_set_isp_bk_buffer_align> [ISP]video_set_isp_bk_buffer_align yuv_align_en = 0, lbc_align_en = 1
E0101 03:24:53.828895 1281 video.c:1065] <video_set_isp_bk_buffer_align> [ISP_ERR]video4 video_set_isp_bk_buffer_align failed!!!
I0101 03:24:53.828974 1281 videoInputHw.c:1104] <videoInputHw_SetChnAttr> ViCh[4] LBC pix:0x3132434c, line_tar_bits[0]:3072, line_tar_bits[1]:4608
I0101 03:24:53.829261 1281 videoInputHw.c:1124] <videoInputHw_SetChnAttr> bs_len:20480, frm_bit:3840
I0101 03:24:54.049307 1281 videoInputHw.c:1390] <videoInputHw_SetCrop> vipp[4] set crop X:0, Y:0, Width:1888, Height:1072
E0101 03:24:54.060158 1287 isp_dev.c:274] <isp_stat_process_buffer> [ISP_ERR]AEWB: stats error, skipping buffer.
E0101 03:24:54.063049 1285 videoInputHw.c:5931] <videoInputHw_GetData> fatal error! LBC wrong data len or buf size, offset_dst:1555200 + data_len:11520 > size:1556224
E0101 03:24:54.063196 1285 videoInputHw.c:6607] <VideoInputHw_CapThread> fatal error! videoInpuHw get data fail[0xa0108009], check code!
E0101 03:24:54.063301 1285 isp_dev.c:956] <isp_sensor_get_configs> [ISP_ERR]gc2053_mipi get config failed: Invalid argument (22).
W0101 03:24:54.063377 1285 videoInputHw.c:6258] <VideoInputHw_CapThread> fatal error! Get isp[0] sensor information failed! must be called AW_MPI_ISP_Run before AW_MPI_VI_EnableVipp.
I0101 03:24:54.064129 1285 videoInputHw.c:6297] <VideoInputHw_CapThread> EnableVipp[4]: vfmt.bufs:3, online:0
I0101 03:24:54.065692 1281 videoInputHw.c:1316] <videoInputHw_ChnEnable> receive enable vipp[4] reply: 0x0!
iniparser: cannot open /etc/cedarc.conf
DEBUG : cedarc <CdcIniParserInit:36>: cannot parse file: /etc/cedarc.conf
iniparser: cannot open /etc/cedarc.conf
DEBUG : cedarc <CdcIniParserInit:36>: cannot parse file: /etc/cedarc.conf
DEBUG : cedarc <VencCreate:555>: now cedarc log level:3
INFO : cedarc <cdc_log_set_level:43>: Set log level to 3 from /vendor/etc/cedarc.conf
DEBUG : cedarc <LogVersionInfo:44>:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cedar Codec <<<<<<<<<<<<<<<<<<<<<<<<<<<<
tag :
branch: tina-v853-dev
commit: 3975729c81dab9f05e2722e09e64d018b4b03c44
date : Sat Jan 27 15:33:52 2024 +0800
author: chenyibin
change-id : I1798fdb3cfa479b7f3eabb212078a906cbe503eb
release_author : ericwang
patch :
----------------------------------------------------------------------
DEBUG : cedarc <VEncoderRegister:1018>: Add '2:h264' fail! '2:h264' already register!
DEBUG : cedarc <CedarPluginVENCInit_h264:13351>: h264 encoder had already register!
DEBUG : cedarc <VEncoderRegister:1018>: Add '3:h265' fail! '3:h265' already register!
DEBUG : cedarc <CedarPluginVENCInit_h265:14111>: h265 encoder had alread register
DEBUG : cedarc <VEncoderRegister:1018>: Add '1:jpeg' fail! '1:jpeg' already register!
DEBUG : cedarc <CedarPluginVENCInit_jpeg:3203>: jpeg encoder had already register
INFO : cedarc <VeInitialize:1172>: *** ic_version = 0x1302000023010,
iniparser: cannot open /etc/cedarc.conf
DEBUG : cedarc <CdcIniParserInit:36>: cannot parse file: /etc/cedarc.conf
DEBUG : cedarc <VeInitialize:1186>: bUseProcessLock = 0, eVeHwLockType = 0
DEBUG : cedarc <VeInitialize:1226>: *** nPhyOffset = 0x0
DEBUG : cedarc <VeSetSpeed:1734>: *** set ve freq to 400 Mhz ***
DEBUG : cedarc <VeInitialize:1281>: ve init ok
DEBUG : ionAlloc <__GetIonMemOpsS:965>: *** get __GetIonMemOpsS ***
DEBUG : ionAlloc <ion_alloc_open:140>: begin ion_alloc_open
DEBUG : cedarc <H264EncOpenVer2:10490>: icverion = 0x23010, bIsRegVerE230 = 1
DEBUG : cedarc <CdcMessageQueueCreate:47>: nMessageSize = 20
DEBUG : cedarc <H264SetParameterVer2:12870>: VENC_IndexParamProductCase: 0
I0101 03:24:54.080081 1281 VideoEnc_Component.c:7350] <VideoEncComponentTunnelRequest> set inputPortTunnelFlag = TRUE
I0101 03:24:54.080267 1281 sample_rtsp.c:730] <configSubLapseStream> subLapse EncppSharpAttenCoefPer: 33%
I0101 03:24:54.080351 1281 sample_rtsp.c:744] <configSubLapseStream> SubLapse vbvThreshSize: 24000, vbvBufSize: 152000
iniparser: cannot open /etc/cedarc.conf
DEBUG : cedarc <CdcIniParserInit:36>: cannot parse file: /etc/cedarc.conf
iniparser: cannot open /etc/cedarc.conf
DEBUG : cedarc <CdcIniParserInit:36>: cannot parse file: /etc/cedarc.conf
DEBUG : cedarc <VencCreate:555>: now cedarc log level:3
INFO : cedarc <cdc_log_set_level:43>: Set log level to 3 from /vendor/etc/cedarc.conf
DEBUG : cedarc <LogVersionInfo:44>:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cedar Codec <<<<<<<<<<<<<<<<<<<<<<<<<<<<
tag :
branch: tina-v853-dev
commit: 3975729c81dab9f05e2722e09e64d018b4b03c44
date : Sat Jan 27 15:33:52 2024 +0800
author: chenyibin
change-id : I1798fdb3cfa479b7f3eabb212078a906cbe503eb
release_author : ericwang
patch :
----------------------------------------------------------------------
DEBUG : cedarc <VEncoderRegister:1018>: Add '2:h264' fail! '2:h264' already register!
DEBUG : cedarc <CedarPluginVENCInit_h264:13351>: h264 encoder had already register!
DEBUG : cedarc <VEncoderRegister:1018>: Add '3:h265' fail! '3:h265' already register!
DEBUG : cedarc <CedarPluginVENCInit_h265:14111>: h265 encoder had alread register
DEBUG : cedarc <VEncoderRegister:1018>: Add '1:jpeg' fail! '1:jpeg' already register!
DEBUG : cedarc <CedarPluginVENCInit_jpeg:3203>: jpeg encoder had already register
INFO : cedarc <VeInitialize:1172>: *** ic_version = 0x1302000023010,
iniparser: cannot open /etc/cedarc.conf
DEBUG : cedarc <CdcIniParserInit:36>: cannot parse file: /etc/cedarc.conf
DEBUG : cedarc <VeInitialize:1186>: bUseProcessLock = 0, eVeHwLockType = 0
DEBUG : cedarc <VeInitialize:1226>: *** nPhyOffset = 0x0
DEBUG : cedarc <VeSetSpeed:1734>: *** set ve freq to 400 Mhz ***
DEBUG : cedarc <VeInitialize:1281>: ve init ok
DEBUG : ionAlloc <__GetIonMemOpsS:965>: *** get __GetIonMemOpsS ***
DEBUG : ionAlloc <ion_alloc_open:140>: begin ion_alloc_open
DEBUG : cedarc <H264EncOpenVer2:10490>: icverion = 0x23010, bIsRegVerE230 = 1
DEBUG : cedarc <CdcMessageQueueCreate:47>: nMessageSize = 20
DEBUG : cedarc <H264SetParameterVer2:12870>: VENC_IndexParamProductCase: 0
I0101 03:24:54.094630 1281 sample_rtsp.c:1431] <main> Lapse set TimeLapse 1000000 us
I0101 03:24:54.095239 1281 VideoEnc_Component.c:4345] <VideoEncSetTimeLapse> SetTimeLapse: captureIntervalUs=1000000.000000, dstFrameIntervalUs=50000.000000, recType=1
I0101 03:24:54.095392 1281 VideoEnc_Component.c:7350] <VideoEncComponentTunnelRequest> set inputPortTunnelFlag = TRUE
WARNING: cedarc <CheckSetParamInt:1039>: Notice: sVbrParam.nQuality is 10, but its suggested value is 1 !
DEBUG : cedarc <H265SetParameter:13487>: VENC_IndexParamPFrameIntraEn: use_intra_in_p_flag:1
I0101 03:24:54.096084 1289 VideoEnc_Component.c:823] <setVbvBufferConfig> user set stream buffer size[933882]bytes
I0101 03:24:54.096235 1289 VideoEnc_Component.c:833] <setVbvBufferConfig> user set threshSize[147450]bytes
I0101 03:24:54.096324 1289 VideoEnc_Component.c:860] <setVbvBufferConfig> bit rate is 1536Kb, set encode vbv size 933888, frame length threshold 147450
DEBUG : cedarc <H265SetParameter:13036>: set rot angle: p_enc->rot_angle = 0...
DEBUG : cedarc <H265SetParameter:13627>: VENC_IndexParamIsNightCaseFlag: is_night_case = 0
I0101 03:24:54.096453 1289 VideoEnc_Component.c:2122] <CedarvVideoEncInit> DropFrameNum: 0
I0101 03:24:54.096525 1289 VideoEnc_Component.c:2138] <CedarvVideoEncInit> VeRecRefBufReduceEnable: 0
DEBUG : cedarc <VencInit:803>: func = VencInit, line = 803
DEBUG : cedarc <VencInit:816>: bOnlineMode = 1, bOnlineChannel = 0
DEBUG : cedarc <VencInit:819>: lbc2.5 = 0, 2.0 = 1, 1.5 = 0, format = 19
DEBUG : cedarc <H265Init:11191>: share buf num = 1
DEBUG : cedarc <BitStreamCreate:129>: BitStreamCreate OK
DEBUG : cedarc <h265InitMemRecRefE230:4296>: recRefQsubDataBufSize = 190976, recRefQsubInfoBufSize = 8608, lbcBusSize = 3067904, lbcMode = 1
DEBUG : ionAlloc <__GetIonMemOpsS:965>: *** get __GetIonMemOpsS ***
DEBUG : ionAlloc <ion_alloc_open:140>: begin ion_alloc_open
INFO : cedarc <VeInitialize:1172>: *** ic_version = 0x1302000023010,
iniparser: cannot open /etc/cedarc.conf
DEBUG : cedarc <CdcIniParserInit:36>: cannot parse file: /etc/cedarc.conf
DEBUG : cedarc <VeInitialize:1186>: bUseProcessLock = 0, eVeHwLockType = 0
DEBUG : cedarc <VeInitialize:1226>: *** nPhyOffset = 0x0
DEBUG : cedarc <VeSetSpeed:1734>: *** set ve freq to 400 Mhz ***
DEBUG : cedarc <VeInitialize:1281>: ve init ok
E0101 03:24:54.110896 1287 isp_dev.c:859] <isp_sync_debug_info> [ISP_ERR]VIDIOC_VIN_ISP_GET_INFO error!
W0101 03:24:54.111092 1287 isp.c:450] <isp_ctx_get_sensor_info> [ISP_WARN]isp debugfs node not support!!!
@null037
where came from mainStream.raw ?
I haven't any .raw file !
@vincent1 在 V853 openwrt系统，make menuconfig打开Allwinner > Visiol>LibAWIspApi 报错 中说：
Only the G value was inexplicably high
如何修复G值？
@yanmingjian 好的，一切都很好，但是如何在 v853 dev.board 的屏幕上显示“hello world”字样？我需要一步一步的解释
@yanmingjian 你好，我想编写代码在屏幕上显示“hello world”一词或启动相机并将其显示在屏幕上，我该怎么做这个allwinner v853 dev.board？
你好，我想编写代码在屏幕上显示“hello world”一词或启动相机并将其显示在屏幕上，我该怎么做这个allwinner v853 dev.board？
@vincent1 为什么学习 v853 dev.board 这么难？到目前为止你有没有想出任何解决方案？
大家好，如何使用全志开发板v853的摄像头和yolov5人体检测。摄像头与yolov5人体检测协同工作，结果实时显示在屏幕上。 ？全志V853.
我的 Allwinner v853 开发板上有 100ASK_uart0_tina_vision.img 固件，但屏幕没有显示任何内容，我想用 C 编写代码来打开和关闭相机，请帮助我
@q15778562940 pack
/home/allwinner/tina/tina-v853-open/build/pack -c sun8iw21p1 -i v853 -p openwrt -b vision -k linux-4.9 -d uart0 -v none -m normal -w none -n default
INFO: /home/allwinner/tina/tina-v853-open/out/v853/common/keys
ERROR: config & build lichee before you pack
有什么解决办法吗？
大家好，我是新来的，我开始学习Allwinner v853，但有时我有点卡住了，从哪里开始学习？我在哪里可以找到对从零到英雄的绝对初学者有用的链接和主题，请给我建议，谢谢。
HELP !
