导航

    全志在线开发者论坛

    • 注册
    • 登录
    • 搜索
    • 版块
    • 话题
    • 在线文档
    • 社区主页
    1. 主页
    2. Gadyellow
    • 资料
    • 关注 2
    • 粉丝 0
    • 我的积分 1149
    • 主题 7
    • 帖子 16
    • 最佳 6
    • 群组 0

    GadyellowLV 5

    @Gadyellow

    1149
    积分
    6
    声望
    9
    资料浏览
    16
    帖子
    0
    粉丝
    2
    关注
    注册时间 最后登录

    Gadyellow 取消关注 关注

    Gadyellow 发布的最佳帖子

    • 回复: T113i调试触控芯片GT911的触摸屏问题

      @shuaige 在 T113i调试触控芯片GT911的触摸屏问题 中说:

      @gadyellow 看一下供电问题

      刚刚给SCL和SDA加了上拉电阻,没有出现上面的log了,但是又出现了新的问题9bc1153c-c9f6-4465-bd1a-0de413f33af0-image.png

      发布在 T Series
      Gadyellow
      Gadyellow
    • 回复: 如何在全志t113-i系统中,添加adb的登录密码

      @whycan 是t系列的开发板没有考虑到吗?我在论坛里面看到了有关r系列相关的adb登录密码的修改r系列adb登录密码配置

      发布在 其它全志芯片讨论区
      Gadyellow
      Gadyellow
    • t113-i 如何固定/dev/input/eventX的事件号

      t113-i开发板上电之前插入usb键盘,通过evtest查看

      d490ece6-f73c-4e1d-aa8b-c4c81c05de22-image.png

      t113-i开发板上电之后插入usb键盘,通过evtest查看

      1f7aa307-2153-4c4e-b79d-fd7cd87f5b83-image.png

      求助一下,有没有哪位知道如何固定这个eventX事件号

      发布在 其它全志芯片讨论区
      Gadyellow
      Gadyellow
    • 回复: t113-i 如何固定/dev/input/eventX的事件号

      @ganhx 不太熟悉你说的这个,不知道怎么改,有没有相关的帖子可以参考一下🤤

      发布在 其它全志芯片讨论区
      Gadyellow
      Gadyellow
    • 回复: t113-i 如何固定/dev/input/eventX的事件号

      @ganhx 请问这么修改正确吗 2f5af2f3-1e8d-4eb7-b4dd-97fb9db51a20-image.png

      发布在 其它全志芯片讨论区
      Gadyellow
      Gadyellow
    • 回复: t113-i 如何固定/dev/input/eventX的事件号

      @ganhx 好的,谢谢您了🤝

      发布在 其它全志芯片讨论区
      Gadyellow
      Gadyellow

    Gadyellow 发布的最新帖子

    • T527屏幕刷新率显示问题

      1024x768后面的这个刷新率是在哪里配置的,如何同ref_fps和fsp保持一帧以内的差距
      b61e6703-8575-40b6-b7d8-3aab6221fa9c-image.png

      发布在 T Series
      Gadyellow
      Gadyellow
    • 回复: T113i调试触控芯片GT911的触摸屏问题

      @shuaige 在 T113i调试触控芯片GT911的触摸屏问题 中说:

      @gadyellow 看一下供电问题

      刚刚给SCL和SDA加了上拉电阻,没有出现上面的log了,但是又出现了新的问题9bc1153c-c9f6-4465-bd1a-0de413f33af0-image.png

      发布在 T Series
      Gadyellow
      Gadyellow
    • RTL8188FU驱动加载后ifconfig -a不显是wlan问题

      [root@ONWA:/T113i_Test]# insmod rtl8188fu.ko
      [ 265.967929] RTW: module init start
      [ 265.971812] RTW: rtl8188fu v5.11.5.4-0-g65b8f0aad.20220413
      [ 265.977920] RTW: build time: Nov 26 2023 17:39:43
      [ 265.983261] RTW: rtw_inetaddr_notifier_register
      [ 265.988493] RTW:
      [ 265.988493] usb_endpoint_descriptor(0):
      [ 265.994933] RTW: bLength=7
      [ 265.997942] RTW: bDescriptorType=5
      [ 266.001756] RTW: bEndpointAddress=81
      [ 266.005733] RTW: wMaxPacketSize=64
      [ 266.009513] RTW: bInterval=0
      [ 266.012743] RTW: RT_usb_endpoint_is_bulk_in = 1
      [ 266.017783] RTW:
      [ 266.017783] usb_endpoint_descriptor(1):
      [ 266.024199] RTW: bLength=7
      [ 266.027206] RTW: bDescriptorType=5
      [ 266.030985] RTW: bEndpointAddress=2
      [ 266.034890] RTW: wMaxPacketSize=64
      [ 266.038672] RTW: bInterval=0
      [ 266.041903] RTW: RT_usb_endpoint_is_bulk_out = 2
      [ 266.047038] RTW:
      [ 266.047038] usb_endpoint_descriptor(2):
      [ 266.053458] RTW: bLength=7
      [ 266.056464] RTW: bDescriptorType=5
      [ 266.060241] RTW: bEndpointAddress=3
      [ 266.064147] RTW: wMaxPacketSize=64
      [ 266.067929] RTW: bInterval=0
      [ 266.071130] RTW: RT_usb_endpoint_is_bulk_out = 3
      [ 266.076297] RTW: nr_endpoint=3, in_num=1, out_num=2
      [ 266.076297]
      [ 266.083390] RTW: USB_SPEED_FULL
      [ 266.086882] RTW: CHIP TYPE: RTL8188FU
      [ 266.091424] RTW: Chip Version Info: CHIP_8188F_S2_1T1R_RomVer(0)
      [ 266.098112] RTW: _ConfigChipOutEP_8188F OutEpQueueSel(0x05), OutEpNumber(2)
      [ 266.106404] RTW: EEPROM type is E-FUSE
      [ 266.115393] RTW: Boot from EFUSE, Autoload OK !
      [ 266.125396] RTW: hal_EfuseSwitchToBank: Efuse switch bank to 0
      [ 268.240396] RTW: hal_ReadEFuse_WiFi: data end at address=0x74
      [ 268.247417] RTW: HW EFUSE
      [ 268.250334] RTW: 0x000: 29 81 00 FC 0B 00 00 00 00 0C 04 4C 10 07 00 00
      [ 268.258236] RTW: 0x010: 20 20 20 23 23 23 23 23 23 26 26 22 FF FF FF FF
      [ 268.266135] RTW: 0x020: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.274036] RTW: 0x030: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.281918] RTW: 0x040: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.289784] RTW: 0x050: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.297679] RTW: 0x060: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.305568] RTW: 0x070: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.313460] RTW: 0x080: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.321348] RTW: 0x090: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.329222] RTW: 0x0A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.337114] RTW: 0x0B0: FF FF FF FF FF FF FF FF 20 18 20 00 00 00 00 FF
      [ 268.345001] RTW: 0x0C0: FF 12 00 10 00 FF 00 FF 00 00 FF FF FF FF FF FF
      [ 268.352896] RTW: 0x0D0: DA 0B 79 F1 42 66 40 48 8F 4C FC 14 65 09 03 52
      [ 268.360766] RTW: 0x0E0: 65 61 6C 74 65 6B 09 03 38 30 32 2E 31 31 6E 00
      [ 268.368663] RTW: 0x0F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.376547] RTW: 0x100: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.384449] RTW: 0x110: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.392341] RTW: 0x120: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.400206] RTW: 0x130: C1 B6 FF FF FF FF FF FF FF FF 00 11 FF FF FF FF
      [ 268.408098] RTW: 0x140: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.415986] RTW: 0x150: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.423873] RTW: 0x160: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.431765] RTW: 0x170: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.439630] RTW: 0x180: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.447521] RTW: 0x190: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.455406] RTW: 0x1A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.463305] RTW: 0x1B0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.471172] RTW: 0x1C0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.479068] RTW: 0x1D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.486955] RTW: 0x1E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.494844] RTW: 0x1F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      [ 268.502739] RTW: EEPROM VID = 0x bda
      [ 268.506714] RTW: EEPROM PID = 0xf179
      [ 268.510692] RTW: hal_com_config_channel_plan chplan:0x20
      [ 268.516631] RTW: Hal_EfuseParsePowerSavingMode_8188F...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(1)
      [ 268.528177] RTW: ### PS params=> power_mgnt(2),usbss_enable(0) ###
      [ 268.569391] RTW: kfree Pwr Trim flag:1
      [ 268.573594] RTW: bb_gain:2
      [ 268.603392] RTW: reg 0x5, usb read 1 fail, status:-62 value=0x0, vendorreq_times:1
      [ 268.612384] RTW: reg 0x5, usb read 1 fail, status:-62 value=0x0, vendorreq_times:2
      [ 268.621393] RTW: reg 0x5, usb read 1 fail, status:-62 value=0x0, vendorreq_times:3
      [ 268.630390] RTW: reg 0x5, usb read 1 fail, status:-62 value=0x0, vendorreq_times:4
      [ 268.639401] RTW: reg 0x5, usb read 1 fail, status:-62 value=0x0, vendorreq_times:5
      [ 268.647854] RTW: [dvobj:5c76b134][ERROR] continual_io_error:5 > 4
      [ 268.654665] RTW: rtl8188f_FirmwareDownload((null)) tmp_ps=0
      [ 268.660869] RTW: rtl8188f_FirmwareDownload fw: FW_NIC, size: 20832
      [ 268.667769] RTW: rtl8188f_FirmwareDownload: fw_ver=f fw_subver=0001 sig=0x88f1, Month=05, Date=06, Hour=09, Minute=34
      [ 268.679595] RTW: rtl8188f_FirmwareDownload(): Shift for fw header!
      [ 268.686486] RTW: rtl8188f_FirmwareDownload by IO write!
      [ 268.895345] RTW: _FWDownloadEnable: !!!!!!!!Write 0x80 Fail!: count = 101
      [ 268.902931] RTW: _8051Reset8188: Finish
      [ 268.907202] RTW: _FWFreeToGo: Polling FW ready Fail! (1, 0ms), REG_MCUFWDL:0x00000000
      [ 268.915956] RTW: rtl8188f_FirmwareDownload fail. write_fw:0, 230ms
      [ 268.922856] RTW: <=== rtl8188f_FirmwareDownload()
      [ 268.928193] RTW: CardDisableRTL8188FU
      [ 268.932322] RTW: hal_read_mac_hidden_rpt Fail! (0, 360ms), fwdl:0, id:0xfd
      [ 268.939971] RTW: rtw_hal_read_chip_info in 2830 ms
      [ 268.945356] RTW: rtw_usb_primary_adapter_init Failed!
      [ 268.951163] usbcore: registered new interface driver rtl8188fu
      [ 268.957749] RTW: module init ret=0

      加载驱动的log如上,ifconfig -a显示的结果如下:

      [root@ONWA:/T113i_Test]# ifconfig -a
      can0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
      NOARP MTU:16 Metric:1
      RX packets:0 errors:0 dropped:0 overruns:0 frame:0
      TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:10
      RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
      Interrupt:2

      ip6tnl0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
      NOARP MTU:1452 Metric:1
      RX packets:0 errors:0 dropped:0 overruns:0 frame:0
      TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:1000
      RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

      lo Link encap:Local Loopback
      inet addr:127.0.0.1 Mask:255.0.0.0
      inet6 addr: ::1/128 Scope:Host
      UP LOOPBACK RUNNING MTU:65536 Metric:1
      RX packets:0 errors:0 dropped:0 overruns:0 frame:0
      TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:1000
      RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

      sit0 Link encap:IPv6-in-IPv4
      NOARP MTU:1480 Metric:1
      RX packets:0 errors:0 dropped:0 overruns:0 frame:0
      TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:1000
      RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

      [root@ONWA:/T113i_Test]#

      请问一下大家,是哪方面可能存在问题?

      发布在 MR Series
      Gadyellow
      Gadyellow
    • 回复: V853显示屏无法直接显示图片

      @ddrddr 请问您解决了吗,我也遇到了相同的问题

      发布在 V Series
      Gadyellow
      Gadyellow
    • 全志t507 glmark2跑分测试

      请问一下,又没有人移植过glmark2,在t507上跑过分

      发布在 其它全志芯片讨论区
      Gadyellow
      Gadyellow
    • 回复: t113-i开启CONFIG_CAN_SUN8I=y配置后编译报错

      @gadyellow 已经解决了,https://open.allwinnertech.com/#/faq/0/show?faqId=2115&menuID=17

      发布在 其它全志芯片讨论区
      Gadyellow
      Gadyellow
    • t113-i开启CONFIG_CAN_SUN8I=y配置后编译报错

      fb627a8e-ee48-41ab-a561-a4d8c2131877-image.png 请教一下大家,有么有碰到过这种情况的,有没有解决办法?

      发布在 其它全志芯片讨论区
      Gadyellow
      Gadyellow
    • 回复: t113-i 如何固定/dev/input/eventX的事件号

      @ganhx 好的,谢谢您了🤝

      发布在 其它全志芯片讨论区
      Gadyellow
      Gadyellow
    • 回复: t113-i 如何固定/dev/input/eventX的事件号

      @ganhx 请问这么修改正确吗 2f5af2f3-1e8d-4eb7-b4dd-97fb9db51a20-image.png

      发布在 其它全志芯片讨论区
      Gadyellow
      Gadyellow
    • 回复: t113-i 如何固定/dev/input/eventX的事件号

      @ganhx 不太熟悉你说的这个,不知道怎么改,有没有相关的帖子可以参考一下🤤

      发布在 其它全志芯片讨论区
      Gadyellow
      Gadyellow