Gadyellow 发布的帖子

1024x768后面的这个刷新率是在哪里配置的，如何同ref_fps和fsp保持一帧以内的差距

@shuaige 在 T113i调试触控芯片GT911的触摸屏问题 中说：

@gadyellow 看一下供电问题

刚刚给SCL和SDA加了上拉电阻，没有出现上面的log了，但是又出现了新的问题

[root@ONWA:/T113i_Test]# insmod rtl8188fu.ko
[ 265.967929] RTW: module init start
[ 265.971812] RTW: rtl8188fu v5.11.5.4-0-g65b8f0aad.20220413
[ 265.977920] RTW: build time: Nov 26 2023 17:39:43
[ 265.983261] RTW: rtw_inetaddr_notifier_register
[ 265.988493] RTW:
[ 265.988493] usb_endpoint_descriptor(0):
[ 265.994933] RTW: bLength=7
[ 265.997942] RTW: bDescriptorType=5
[ 266.001756] RTW: bEndpointAddress=81
[ 266.005733] RTW: wMaxPacketSize=64
[ 266.009513] RTW: bInterval=0
[ 266.012743] RTW: RT_usb_endpoint_is_bulk_in = 1
[ 266.017783] RTW:
[ 266.017783] usb_endpoint_descriptor(1):
[ 266.024199] RTW: bLength=7
[ 266.027206] RTW: bDescriptorType=5
[ 266.030985] RTW: bEndpointAddress=2
[ 266.034890] RTW: wMaxPacketSize=64
[ 266.038672] RTW: bInterval=0
[ 266.041903] RTW: RT_usb_endpoint_is_bulk_out = 2
[ 266.047038] RTW:
[ 266.047038] usb_endpoint_descriptor(2):
[ 266.053458] RTW: bLength=7
[ 266.056464] RTW: bDescriptorType=5
[ 266.060241] RTW: bEndpointAddress=3
[ 266.064147] RTW: wMaxPacketSize=64
[ 266.067929] RTW: bInterval=0
[ 266.071130] RTW: RT_usb_endpoint_is_bulk_out = 3
[ 266.076297] RTW: nr_endpoint=3, in_num=1, out_num=2
[ 266.076297]
[ 266.083390] RTW: USB_SPEED_FULL
[ 266.086882] RTW: CHIP TYPE: RTL8188FU
[ 266.091424] RTW: Chip Version Info: CHIP_8188F_S2_1T1R_RomVer(0)
[ 266.098112] RTW: _ConfigChipOutEP_8188F OutEpQueueSel(0x05), OutEpNumber(2)
[ 266.106404] RTW: EEPROM type is E-FUSE
[ 266.115393] RTW: Boot from EFUSE, Autoload OK !
[ 266.125396] RTW: hal_EfuseSwitchToBank: Efuse switch bank to 0
[ 268.240396] RTW: hal_ReadEFuse_WiFi: data end at address=0x74
[ 268.247417] RTW: HW EFUSE
[ 268.250334] RTW: 0x000: 29 81 00 FC 0B 00 00 00 00 0C 04 4C 10 07 00 00
[ 268.258236] RTW: 0x010: 20 20 20 23 23 23 23 23 23 26 26 22 FF FF FF FF
[ 268.266135] RTW: 0x020: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.274036] RTW: 0x030: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.281918] RTW: 0x040: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.289784] RTW: 0x050: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.297679] RTW: 0x060: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.305568] RTW: 0x070: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.313460] RTW: 0x080: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.321348] RTW: 0x090: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.329222] RTW: 0x0A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.337114] RTW: 0x0B0: FF FF FF FF FF FF FF FF 20 18 20 00 00 00 00 FF
[ 268.345001] RTW: 0x0C0: FF 12 00 10 00 FF 00 FF 00 00 FF FF FF FF FF FF
[ 268.352896] RTW: 0x0D0: DA 0B 79 F1 42 66 40 48 8F 4C FC 14 65 09 03 52
[ 268.360766] RTW: 0x0E0: 65 61 6C 74 65 6B 09 03 38 30 32 2E 31 31 6E 00
[ 268.368663] RTW: 0x0F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.376547] RTW: 0x100: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.384449] RTW: 0x110: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.392341] RTW: 0x120: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.400206] RTW: 0x130: C1 B6 FF FF FF FF FF FF FF FF 00 11 FF FF FF FF
[ 268.408098] RTW: 0x140: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.415986] RTW: 0x150: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.423873] RTW: 0x160: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.431765] RTW: 0x170: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.439630] RTW: 0x180: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.447521] RTW: 0x190: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.455406] RTW: 0x1A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.463305] RTW: 0x1B0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.471172] RTW: 0x1C0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.479068] RTW: 0x1D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.486955] RTW: 0x1E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.494844] RTW: 0x1F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 268.502739] RTW: EEPROM VID = 0x bda
[ 268.506714] RTW: EEPROM PID = 0xf179
[ 268.510692] RTW: hal_com_config_channel_plan chplan:0x20
[ 268.516631] RTW: Hal_EfuseParsePowerSavingMode_8188F...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(1)
[ 268.528177] RTW: ### PS params=> power_mgnt(2),usbss_enable(0) ###
[ 268.569391] RTW: kfree Pwr Trim flag:1
[ 268.573594] RTW: bb_gain:2
[ 268.603392] RTW: reg 0x5, usb read 1 fail, status:-62 value=0x0, vendorreq_times:1
[ 268.612384] RTW: reg 0x5, usb read 1 fail, status:-62 value=0x0, vendorreq_times:2
[ 268.621393] RTW: reg 0x5, usb read 1 fail, status:-62 value=0x0, vendorreq_times:3
[ 268.630390] RTW: reg 0x5, usb read 1 fail, status:-62 value=0x0, vendorreq_times:4
[ 268.639401] RTW: reg 0x5, usb read 1 fail, status:-62 value=0x0, vendorreq_times:5
[ 268.647854] RTW: [dvobj:5c76b134][ERROR] continual_io_error:5 > 4
[ 268.654665] RTW: rtl8188f_FirmwareDownload((null)) tmp_ps=0
[ 268.660869] RTW: rtl8188f_FirmwareDownload fw: FW_NIC, size: 20832
[ 268.667769] RTW: rtl8188f_FirmwareDownload: fw_ver=f fw_subver=0001 sig=0x88f1, Month=05, Date=06, Hour=09, Minute=34
[ 268.679595] RTW: rtl8188f_FirmwareDownload(): Shift for fw header!
[ 268.686486] RTW: rtl8188f_FirmwareDownload by IO write!
[ 268.895345] RTW: _FWDownloadEnable: !!!!!!!!Write 0x80 Fail!: count = 101
[ 268.902931] RTW: _8051Reset8188: Finish
[ 268.907202] RTW: _FWFreeToGo: Polling FW ready Fail! (1, 0ms), REG_MCUFWDL:0x00000000
[ 268.915956] RTW: rtl8188f_FirmwareDownload fail. write_fw:0, 230ms
[ 268.922856] RTW: <=== rtl8188f_FirmwareDownload()
[ 268.928193] RTW: CardDisableRTL8188FU
[ 268.932322] RTW: hal_read_mac_hidden_rpt Fail! (0, 360ms), fwdl:0, id:0xfd
[ 268.939971] RTW: rtw_hal_read_chip_info in 2830 ms
[ 268.945356] RTW: rtw_usb_primary_adapter_init Failed!
[ 268.951163] usbcore: registered new interface driver rtl8188fu
[ 268.957749] RTW: module init ret=0

加载驱动的log如上，ifconfig -a显示的结果如下：

[root@ONWA:/T113i_Test]# ifconfig -a
can0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
NOARP MTU:16 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:10
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:2

ip6tnl0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
NOARP MTU:1452 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

[root@ONWA:/T113i_Test]#

请问一下大家，是哪方面可能存在问题？

@ddrddr 请问您解决了吗，我也遇到了相同的问题

请问一下，又没有人移植过glmark2，在t507上跑过分

@gadyellow 已经解决了，https://open.allwinnertech.com/#/faq/0/show?faqId=2115&menuID=17

请教一下大家，有么有碰到过这种情况的，有没有解决办法？

@ganhx 好的，谢谢您了

@ganhx 请问这么修改正确吗

@ganhx 不太熟悉你说的这个，不知道怎么改，有没有相关的帖子可以参考一下

t113-i开发板上电之前插入usb键盘，通过evtest查看

t113-i开发板上电之后插入usb键盘，通过evtest查看

求助一下，有没有哪位知道如何固定这个eventX事件号

@whycan 晕哥，能不能详细说一下

@whycan 但是晕哥，t系列的sdk和r系列的sdk区别有点大，好像并不适用

@whycan 是t系列的开发板没有考虑到吗？我在论坛里面看到了有关r系列相关的adb登录密码的修改r系列adb登录密码配置

如何在全志t113-i系统中，添加adb的登录密码