您好：
1）将一张argb_1024_768.bin文件发送给fb0。使用工具查看该bin文件的图像为
2）执行命令cat argb_1024_768.bin > /dev/fb0,发现LCD显示内容如下图片
不知道这是什么原因导致是，内核默认是否开启某种颜色矫正或者isp矫正等相关服务？
3）然后手动获取tcon内容，执行过程如下：
echo 0 > /sys/class/disp/disp/attr/disp
echo /data/filename.bmp > /sys/class/disp/disp/attr/capture_dump
用工具打开filename.bmp文件，发现文件内容是：
4）对比文件argb_1024_768.bin和filename.bmp，发现除了bmp的头外，argb部分的二进制数据是一样的。
该LCD屏显示接口是rgb总线。请问如何可以正常显示灰度图片 谢谢。
@whycan 我这边没有找到
ZhaoBinBin@R740:/WorkDisk/ZhaoBinBinWorkDisk/01_project/04_quanzhi/01_V853/09_suozhi/v85x-ipc/v85x-ipc-sdk-v0.8-upload$ find . -name monitor
./lichee/linux-4.9/drivers/net/wireless/rtl8733bs/core/monitor
./lichee/linux-4.9/drivers/net/wireless/rtl8723ds/core/monitor
./out/v853s-perf1/compile_dir/target/bluez-5.54/monitor
ZhaoBinBin@R740:/WorkDisk/ZhaoBinBinWorkDisk/01_project/04_quanzhi/01_V853/09_suozhi/v85x-ipc/v85x-ipc-sdk-v0.8-upload$ find . -name lvgl*
./package/gui/littlevgl-8/lv_demos/src/lv_demo_widgets/assets/lvgl_logo.png
./package/gui/littlevgl-8/lvgl
./package/gui/littlevgl-8/lvgl/src/lvgl.h
./package/gui/littlevgl-8/lvgl/lvgl.h
./package/gui/littlevgl-8/lvgl/lvgl.mk
根据LCD屏驱动文档https://v853.docs.aw-ol.com/soft/dev_lcd/#logo_1
目前可以测试：1）cat /dev/urandom > /dev/fb0 ；
2）echo 8 > /sys/class/disp/disp/attr/colorbar 彩条测试。
请问如何将一张图片直接丢到LCD的buf中直接显示出来。此处rgb18的管脚配置。是应该使用cat rgb666.bin > /dev/fb0还是使用cat rgb888.bin > /dev/fb0，不知道这样理解对不对?这种方式是否就可将图片显示在LCD屏上了？谢谢。
│ CONFIG_mpp_sample_g2d: │
│ │
│ mpp sample g2d. │
│ │
│ Symbol: mpp_sample_g2d [=y]
│ Type : boolean │
│ Prompt: mpp sample g2d │
│ Location: │
│ -> Allwinner │
│ -> eyesee-mpp │
│ -> eyesee-mpp-middleware. eyesee-mpp-middleware for Tina Linux (PACKAGE_eyesee-mpp-middleware [=y]) │
│ -> select mpp sample (mpp_sample [=y]) │
│ Defined at package/allwinner/eyesee-mpp/middleware/Config.in:519 │
│ Depends on: PACKAGE_eyesee-mpp-middleware [=y] && mpp_sample [=y]
在执行mp指令后，发现在根文件系统下没生成sample_g2d镜像文件
在V853开发板上使用v4l2-ctl工具 貌似不可以直接使用
root@TinaLinux:/hzhy# v4l2-ctl --info
[ 715.242229] [VIN_ERR]v4l2 sub device scaler get_selection error!
Driver Info[ 715.257521] [VIN_ERR]v4l2 sub device scaler get_selection error!
:
Driver name : sunxi-vin
Card type : sunxi-vin
Bus info :
Driver version : 1.0.0
Capabilities : 0x85201000
Video Capture Multiplanar
Read/Write
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x00200000
Extended Pix Format
Media Driver Info:
Driver name : sunxi-vin-media
Model : Allwinner Vin
Serial :
Bus info :
Media version : 0.1.0
Hardware revision: 0x00000000 (0)
Driver version : 0.0.0
Interface Info:
ID : 0x03000009
Type : V4L Video
Entity Info:
ID : 0x00000008 (8)
Name : vin_video0
Function : V4L2 I/O
Pad 0x0100000b : Sink
Link 0x020000ad: from remote pad 0x1000007 of entity 'vin_cap.0': Data, Enabled
root@TinaLinux:/hzhy#
root@TinaLinux:/hzhy# v4l2-ctl -d /dev/video0 --set-fmt-video=width=1920,height=
1080,pixelformat=NV12 --stream-mmap=3 --stream-skip=30 --stream-to=tst.out --str
eam-count=1 --stream-pol
[ 799.397359] [VIN_ERR]v4l2 sub device scaler get_selection error!
VIDIOC_G_FMT: failed: Invalid ar[ 799.411966] [VIN_ERR]v4l2 sub device scaler get_selection error!
gument
unsupported stream type
请问 如何可以获取一张camera图像 谢谢。已经有video节点，外接双目gc2053_mipi
root@TinaLinux:/hzhy# ls /dev
by-name tty tty48 v4l-subdev26
cedar_dev tty0 tty49 v4l-subdev27
console tty1 tty5 v4l-subdev28
cpu_dma_latency tty10 tty50 v4l-subdev29
disp tty11 tty51 v4l-subdev3
fb0 tty12 tty52 v4l-subdev30
full tty13 tty53 v4l-subdev31
g2d tty14 tty54 v4l-subdev32
gpiochip0 tty15 tty55 v4l-subdev33
i2c-0 tty16 tty56 v4l-subdev34
i2c-1 tty17 tty57 v4l-subdev35
i2c-2 tty18 tty58 v4l-subdev36
i2c-3 tty19 tty59 v4l-subdev37
i2c-4 tty2 tty6 v4l-subdev38
input tty20 tty60 v4l-subdev39
ion tty21 tty61 v4l-subdev4
kmsg tty22 tty62 v4l-subdev40
media0 tty23 tty63 v4l-subdev41
memory_bandwidth tty24 tty7 v4l-subdev42
mmcblk0 tty25 tty8 v4l-subdev43
mmcblk0boot0 tty26 tty9 v4l-subdev5
mmcblk0boot1 tty27 ttyS0 v4l-subdev6
mmcblk0p1 tty28 ttyS3 v4l-subdev7
mmcblk0p2 tty29 urandom v4l-subdev8
mmcblk0p3 tty3 usb-ffs v4l-subdev9
mmcblk0p4 tty30 v4l-subdev0 vcs
mmcblk0p5 tty31 v4l-subdev1 vcs1
mmcblk0p6 tty32 v4l-subdev10 vcsa
mmcblk0p7 tty33 v4l-subdev11 vcsa1
mmcblk0rpmb tty34 v4l-subdev12 video0
network_latency tty35 v4l-subdev13 video1
network_throughput tty36 v4l-subdev14 video12
null tty37 v4l-subdev15 video13
ptmx tty38 v4l-subdev16 video4
pts tty39 v4l-subdev17 video5
random tty4 v4l-subdev18 video8
rfkill tty40 v4l-subdev19 video9
rtc0 tty41 v4l-subdev2 vipcore
shm tty42 v4l-subdev20 watchdog
sid_efuse tty43 v4l-subdev21 watchdog0
snd tty44 v4l-subdev22 watchdog1
sunxi-reg tty45 v4l-subdev23 wiegand driver
sunxi-wlan tty46 v4l-subdev24 zero
sunxi_soc_info tty47 v4l-subdev25
配置如下，将选项设置成y
编译结果如下：
make[8]: Leaving directory '/home/work_disk/work_quanzhi/01_v853/01_env_v853s/tina-v853s_0806/tina-v851-release/out/v853s-perf1/compile_dir/target/v4l-utils-1.20.0/utils/media-ctl'
make[7]: Leaving directory '/home/work_disk/work_quanzhi/01_v853/01_env_v853s/tina-v853s_0806/tina-v851-release/out/v853s-perf1/compile_dir/target/v4l-utils-1.20.0/utils/media-ctl'
Making all in v4l2-ctl
make[7]: Entering directory '/home/work_disk/work_quanzhi/01_v853/01_env_v853s/tina-v853s_0806/tina-v851-release/out/v853s-perf1/compile_dir/target/v4l-utils-1.20.0/utils/v4l2-ctl'
sed -e '/#define MEDIA_BUS_FMT/ ! d; s/.*FMT_//; /FIXED/ d; s/\t.*//; s/.*/{ \"&\", MEDIA_BUS_FMT_& },/;' \
< ../../include/linux/media-bus-format.h > media-bus-format-names.h
make all-am
make[8]: Entering directory '/home/work_disk/work_quanzhi/01_v853/01_env_v853s/tina-v853s_0806/tina-v851-release/out/v853s-perf1/compile_dir/target/v4l-utils-1.20.0/utils/v4l2-ctl'
CXX v4l2_ctl-v4l2-ctl.o
CXX v4l2_ctl-v4l2-ctl-common.o
CXX v4l2_ctl-v4l2-ctl-tuner.o
CXX v4l2_ctl-v4l2-ctl-io.o
CXX v4l2_ctl-v4l2-ctl-stds.o
CXX v4l2_ctl-v4l2-ctl-vidcap.o
CXX v4l2_ctl-v4l2-ctl-vidout.o
CXX v4l2_ctl-v4l2-ctl-overlay.o
CXX v4l2_ctl-v4l2-ctl-vbi.o
CXX v4l2_ctl-v4l2-ctl-selection.o
CXX v4l2_ctl-v4l2-ctl-misc.o
CXX v4l2_ctl-v4l2-ctl-streaming.o
In file included from /home/work_disk/work_quanzhi/01_v853/01_env_v853s/tina-v853s_0806/tina-v851-release/out/v853s-perf1/staging_dir/target/usr/include/uClibc++/cstdlib:20:0,
from v4l2-ctl-streaming.cpp:1:
/home/work_disk/work_quanzhi/01_v853/01_env_v853s/tina-v853s_0806/tina-v851-release/out/v853s-perf1/staging_dir/target/usr/include/uClibc++/basic_definitions:23:9: error: '#pragma' is not allowed here
#pragma GCC visibility push(default)
^~~
/home/work_disk/work_quanzhi/01_v853/01_env_v853s/tina-v853s_0806/tina-v851-release/out/v853s-perf1/staging_dir/target/usr/include/uClibc++/basic_definitions:57:24: warning: no matching push for '#pragma GCC visibility pop' [-Wpragmas]
#pragma GCC visibility pop
^~~
Makefile:889: recipe for target 'v4l2_ctl-v4l2-ctl-streaming.o' failed
make[8]: *** [v4l2_ctl-v4l2-ctl-streaming.o] Error 1
make[8]: Leaving directory '/home/work_disk/work_quanzhi/01_v853/01_env_v853s/tina-v853s_0806/tina-v851-release/out/v853s-perf1/compile_dir/target/v4l-utils-1.20.0/utils/v4l2-ctl'
Makefile:495: recipe for target 'all' failed
make[7]: *** [all] Error 2
make[7]: Leaving directory '/home/work_disk/work_quanzhi/01_v853/01_env_v853s/tina-v853s_0806/tina-v851-release/out/v853s-perf1/compile_dir/target/v4l-utils-1.20.0/utils/v4l2-ctl'
Makefile:473: recipe for target 'all-recursive' failed
make[6]: *** [all-recursive] Error 1
make[6]: Leaving directory '/home/work_disk/work_quanzhi/01_v853/01_env_v853s/tina-v853s_0806/tina-v851-release/out/v853s-perf1/compile_dir/target/v4l-utils-1.20.0/utils'
Makefile:583: recipe for target 'all-recursive' failed
make[5]: *** [all-recursive] Error 1
make[5]: Leaving directory '/home/work_disk/work_quanzhi/01_v853/01_env_v853s/tina-v853s_0806/tina-v851-release/out/v853s-perf1/compile_dir/target/v4l-utils-1.20.0'
Makefile:510: recipe for target 'all' failed
make[4]: *** [all] Error 2
make[4]: Leaving directory '/home/work_disk/work_quanzhi/01_v853/01_env_v853s/tina-v853s_0806/tina-v851-release/out/v853s-perf1/compile_dir/target/v4l-utils-1.20.0'
Makefile:116: recipe for target '/home/work_disk/work_quanzhi/01_v853/01_env_v853s/tina-v853s_0806/tina-v851-release/out/v853s-perf1/compile_dir/target/v4l-utils-1.20.0/.built' failed
make[3]: *** [/home/work_disk/work_quanzhi/01_v853/01_env_v853s/tina-v853s_0806/tina-v851-release/out/v853s-perf1/compile_dir/target/v4l-utils-1.20.0/.built] Error 2
make[3]: Leaving directory '/home/work_disk/work_quanzhi/01_v853/01_env_v853s/tina-v853s_0806/tina-v851-release/package/libs/libv4l'
package/Makefile:192: recipe for target 'package/libs/libv4l/compile' failed
make[2]: *** [package/libs/libv4l/compile] Error 2
make[2]: Leaving directory '/home/work_disk/work_quanzhi/01_v853/01_env_v853s/tina-v853s_0806/tina-v851-release'
package/Makefile:189: recipe for target '/home/work_disk/work_quanzhi/01_v853/01_env_v853s/tina-v853s_0806/tina-v851-release/out/v853s-perf1/staging_dir/target/stamp/.package_compile' failed
make[1]: *** [/home/work_disk/work_quanzhi/01_v853/01_env_v853s/tina-v853s_0806/tina-v851-release/out/v853s-perf1/staging_dir/target/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/work_disk/work_quanzhi/01_v853/01_env_v853s/tina-v853s_0806/tina-v851-release'
/home/work_disk/work_quanzhi/01_v853/01_env_v853s/tina-v853s_0806/tina-v851-release/build/toplevel.mk:304: recipe for target 'world' failed
make: *** [world] Error 2
#### make failed to build some targets (01:30 (mm:ss)) ####
hzhy@hzhy-Development:/home/work_disk/work_quanzhi/01_v853/01_env_v853s/tina-v853s_0806/tina-v851-release$
请问，这个该如何解决 谢谢！
@whycanservice 您好，我去掉dropbear勾选了openssh，但执行出错。
root@TinaLinux:/# ./etc/init.d/sshd start
root@TinaLinux:/# /etc/rc.common: line 128: procd_add_mdns: not found
Privilege separation user sshd does not exist
root@TinaLinux:/# cat /etc/passwd
root:x:0:0:root:/root:/bin/ash
daemon:*:1:1:daemon:/var:/bin/false
ftp:*:55:55:ftp:/home/ftp:/bin/false
network:*:101:101:network:/var:/bin/false
nobody:*:65534:65534:nobody:/var:/bin/false
sshd:x:74:74:Privilege-separated
SSH:/usr/sbin/sshd:/sbin/nologin
root@TinaLinux:/#
root@TinaLinux:/# ps
PID USER VSZ STAT COMMAND
1 root 1056 S /sbin/init
2 root 0 SW [kthreadd]
3 root 0 SW [kworker/0:0]
4 root 0 SW< [kworker/0:0H]
5 root 0 SW [kworker/u2:0]
6 root 0 SW [ksoftirqd/0]
7 root 0 SW [rcu_preempt]
8 root 0 SW [rcu_sched]
9 root 0 SW [rcu_bh]
10 root 0 SW< [lru-add-drain]
11 root 0 SW [kdevtmpfs]
12 root 0 SW [kworker/u2:1]
321 root 0 SW [oom_reaper]
322 root 0 SW< [writeback]
324 root 0 SW< [crypto]
325 root 0 SW< [bioset]
327 root 0 SW< [kblockd]
369 root 0 SW [kworker/0:1]
377 root 0 SW [irq/330-axp2101]
426 root 0 SW [sys_user]
437 root 0 SW< [cfg80211]
443 root 0 SW< [watchdogd]
542 root 0 SW [kswapd0]
601 root 0 SW< [SquashFS read w]
632 root 0 SW [vsync proc 0]
716 root 0 SW< [btudpwork]
717 root 0 SW< [btfwwork]
719 root 0 SW [cfinteractive]
730 root 0 SW [irq/303-sunxi-m]
758 root 0 SW< [ipv6_addrconf]
760 root 0 SW< [krfcommd]
768 root 0 DW [usb-hardware-sc]
771 root 0 SW< [bioset]
772 root 0 SW [mmcqd/0]
773 root 0 SW< [bioset]
774 root 0 SW [mmcqd/0boot0]
775 root 0 SW< [bioset]
776 root 0 SW [mmcqd/0boot1]
777 root 0 SW< [bioset]
778 root 0 SW [mmcqd/0rpmb]
796 root 0 SW< [kworker/0:1H]
818 root 0 SW [jbd2/mmcblk0p5-]
819 root 0 SW< [ext4-rsv-conver]
849 root 0 SW [jbd2/mmcblk0p7-]
850 root 0 SW< [ext4-rsv-conver]
855 root 0 SW [xradio_etf]
861 root 0 SW [xradio_proc]
870 root 0 SW [xradio_proc]
1028 root 1232 S adbd
1030 root 1320 S /usr/sbin/dbus-daemon --system
1035 root 1316 S wifi_deamon
1055 root 696 S /sbin/swupdate-progress -w
1058 root 1056 S -/bin/sh
1092 root 1056 S udhcpc -b -R
1123 root 1056 R ps
root@TinaLinux:/#
menuconfig配置如下：
将所有的openssh勾选了
root@TinaLinux:/# ./etc/init.d/dropbear start
root@TinaLinux:/# /etc/rc.common: line 269: uci_load: not found
ps
PID USER VSZ STAT COMMAND
1 root 1056 S /sbin/init
2 root 0 SW [kthreadd]
3 root 0 SW [kworker/0:0]
4 root 0 SW< [kworker/0:0H]
5 root 0 SW [kworker/u2:0]
6 root 0 SW [ksoftirqd/0]
7 root 0 SW [rcu_preempt]
8 root 0 SW [rcu_sched]
9 root 0 SW [rcu_bh]
10 root 0 SW< [lru-add-drain]
11 root 0 SW [kdevtmpfs]
12 root 0 SW [kworker/u2:1]
321 root 0 SW [oom_reaper]
322 root 0 SW< [writeback]
324 root 0 SW< [crypto]
325 root 0 SW< [bioset]
327 root 0 SW< [kblockd]
369 root 0 SW [kworker/0:1]
377 root 0 SW [irq/330-axp2101]
426 root 0 SW [sys_user]
437 root 0 SW< [cfg80211]
443 root 0 SW< [watchdogd]
542 root 0 SW [kswapd0]
601 root 0 SW< [SquashFS read w]
632 root 0 SW [vsync proc 0]
634 root 0 SW [kworker/0:2]
708 root 0 SW [kworker/0:3]
712 root 0 SW [kworker/0:4]
717 root 0 SW< [btudpwork]
718 root 0 SW< [btfwwork]
720 root 0 SW [cfinteractive]
731 root 0 SW [irq/303-sunxi-m]
758 root 0 SW< [ipv6_addrconf]
760 root 0 SW< [krfcommd]
768 root 0 DW [usb-hardware-sc]
771 root 0 SW< [bioset]
772 root 0 SW [mmcqd/0]
773 root 0 SW< [bioset]
774 root 0 SW [mmcqd/0boot0]
775 root 0 SW< [bioset]
776 root 0 SW [mmcqd/0boot1]
777 root 0 SW< [bioset]
778 root 0 SW [mmcqd/0rpmb]
796 root 0 SW< [kworker/0:1H]
818 root 0 SW [jbd2/mmcblk0p5-]
819 root 0 SW< [ext4-rsv-conver]
849 root 0 SW [jbd2/mmcblk0p7-]
850 root 0 SW< [ext4-rsv-conver]
855 root 0 SW [xradio_etf]
861 root 0 SW [xradio_proc]
870 root 0 SW [xradio_proc]
1029 root 1232 S adbd
1031 root 1320 S /usr/sbin/dbus-daemon --system
1036 root 1316 S wifi_deamon
1051 root 696 S /sbin/swupdate-progress -w
1058 root 1056 S -/bin/sh
1073 root 0 SW [kworker/u2:2]
1085 root 1056 S udhcpc -b -R
1139 root 1056 R ps
root@TinaLinux:/# pwd
/
root@TinaLinux:/#
root@TinaLinux:/#
@whycanservice 现在问题是镜像启动后 没有/usr/sbin目录。只有如下目录：
root@TinaLinux:/# ls /usr/
bin share
这两个目录貌似跟tina/target/allwinner/v853s-perf1/busybox-init-base-files/目录下的usr目录比较相似。
请问这是什么原因导致的。个人理解打包的路径应该是staging_dir或者是compile_dir才对。
./out/v853s-perf1/staging_dir/target/rootfs/usr/sbin/dropbear
./out/v853s-perf1/staging_dir/target/rootfs/etc/config/dropbear
./out/v853s-perf1/staging_dir/target/rootfs/etc/dropbear
./out/v853s-perf1/staging_dir/target/rootfs/etc/init.d/dropbear
./out/v853s-perf1/compile_dir/target/rootfs/usr/sbin/dropbear
./out/v853s-perf1/compile_dir/target/rootfs/etc/config/dropbear
./out/v853s-perf1/compile_dir/target/rootfs/etc/dropbear
./out/v853s-perf1/compile_dir/target/rootfs/etc/init.d/dropbear
请问文件系统镜像打包是用的staging_dir 还是compile_dir？还是依据别的目录 谢谢！
V853s默认的文件系统是squashfs，只读文件系统。烧写的镜像启动后/etc/rcS文件不可操作，无法添加用户的启动脚本。如何生成ext4文件系统，启动介质为emmc?
尝试
1)修改env-4.9.cfg文件内容：rootfstype=ext4
2）在SDK目录下执行make menuconfig将
TARGET_ROOTFS_EXT4FS = y
TARGET_ROOTFS_SQUASHFS = n
但是这样修改出错：
dd: failed to open '/home/work_disk/work_quanzhi/01_v853/01_env_v853s/tina-v853s_0802/tina-v851-release/out/v853s-perf1/compile_dir/target/linux-v853s-perf1/usr.ext4': No such file or directory
请问 如何解决根文件系统类型的问题，谢谢。
@whycanservice 您好，发现在sdk下查找dropbear如下：
./package/network/services/dropbear
./out/v853s-perf1/staging_dir/target/rootfs/usr/sbin/dropbear
./out/v853s-perf1/staging_dir/target/rootfs/etc/config/dropbear
./out/v853s-perf1/staging_dir/target/rootfs/etc/dropbear
./out/v853s-perf1/staging_dir/target/rootfs/etc/init.d/dropbear
./out/v853s-perf1/compile_dir/target/rootfs/usr/sbin/dropbear
./out/v853s-perf1/compile_dir/target/rootfs/etc/config/dropbear
./out/v853s-perf1/compile_dir/target/rootfs/etc/dropbear
./out/v853s-perf1/compile_dir/target/rootfs/etc/init.d/dropbear
但是镜像启动后，问题：
1）在/usr 目录下没有sbin目录；
2）vi /etc/rcS 提示是只读 ，可实际是如何在rcS内添加用户的启动脚本；
3）编译过程中staging_dir和compile_dir目录，哪一个是最终打包生成镜像所需要的目录；
4）为何/usr/sbin目录在镜像中没有生成？
谢谢！
【超级会员V5】通过百度网盘分享的文件：tina-v851.tar.gz
链接:https://pan.baidu.com/s/1GIK5xT8iv1iRYPJkFdOH0g?pwd=v853
提取码:v853
SDK目录如下：
在SDK的根目录下执行make menuconfig,将dropbear包使能并保存
然后执行mp.
烧写生成后的固件，发现启动后没有dropbear服务。
以相同的方式勾选命令i2cdetect i2cdump i2cset i2cget,发现烧写的镜像中没有这些指令。在整个SDK下也没搜到生成的这些二进制指令
请问如何添加包到烧写的文件系统镜像中。
@whycanservice 你好 该问题已解决。
sudo dpkg --add-architecture i386
sudo apt-get update
sudo apt install gcc-multilib
sudo apt install libc6:i386 libstdc++6:i386 lib32z1
谢谢
@whycanservice
实际存储介质为emmc，将sys_config.fex修改成
[target]
storage_type = 2
编译打包的镜像可以烧写进入了 谢谢！
@whycanservice SDK没做任何修改，可以编译过去 但是没烧写进入。
sys_config.fex内容未做任何改动，实际存储介质为emmc
[target]
storage_type = 3
nand_use_ubi = 1
power_mode = 0
烧写失败日志如下：
00005474 13235.43554688 [12568] [magic cube] file not modify, no need to load again
00005475 13236.77441406 [23824] IN 1
00005476 13236.86132813 [23824] ********* before Fel2Fes *********
00005477 13236.86132813 [23824] ********* pFel2FesParam->extend = 0xefe8da00 *********
00005478 13236.86230469 [23824] ***************************************
00005479 13236.86230469 [23824] ********ToolEntry_fel************
00005480 13236.86230469 [23824] ***************************************
00005481 13236.86230469 [23824] PANIC : enter fel choose mode
00005482 13236.86230469 [23824] fel other=0x5a3a0
00005483 13236.86230469 [23824] OS SourceCodePage = 936
00005484 13236.86328125 [23824] WRN: fail in LoadPluginCenter, f(IniLanPlg)L45
00005485 13236.86328125 [23824] WRN: f(exist_multiple_lang_tips)L94, Fail to init plg of iniLan, "Please update LiveSuit"
00005486 13236.86718750 [23824] user choose not to erase
00005487 13236.86718750 [23824] OO, User cancel to update!
00005488 13236.87500000 [23824] Img_OpenItem now!
00005489 13236.87500000 [23824] Img_OpenItem[FES ][FES_1-0000000000]
00005490 13236.87500000 [23824] down file length = 4de0.
00005491 13236.87792969 [23824] magic eGON.BT0崿]鬣M, it is fes1
00005492 13236.87792969 [23824] down and run fes1 at addr 0x28000
00005493 13236.87890625 [23824] Clear dram log OK.
00005494 13236.91796875 [23824] DOWN FES1_dram OK
00005495 13237.42285156 [23824] dram paras[0]: 0x3a8
00005496 13237.42285156 [23824] dram paras[1]: 0x3
00005497 13237.42382813 [23824] dram paras[2]: 0x7b7bfb
00005498 13237.42480469 [23824] dram paras[3]: 0x1
00005499 13237.42480469 [23824] dram paras[4]: 0x10d2
00005500 13237.42578125 [23824] dram paras[5]: 0x800000
00005501 13237.42578125 [23824] dram paras[6]: 0x1e14
00005502 13237.42675781 [23824] dram paras[7]: 0x42
00005503 13237.42675781 [23824] dram paras[8]: 0x20
00005504 13237.42675781 [23824] dram paras[9]: 0x0
00005505 13237.42773438 [23824] dram paras[10]: 0x4899d7
00005506 13237.42773438 [23824] dram paras[11]: 0x1c241d0
00005507 13237.42773438 [23824] dram paras[12]: 0xa4073
00005508 13237.42773438 [23824] dram paras[13]: 0xb4787896
00005509 13237.42871094 [23824] dram paras[14]: 0x0
00005510 13237.42871094 [23824] dram paras[15]: 0x48484848
00005511 13237.42871094 [23824] dram paras[16]: 0x48
00005512 13237.42871094 [23824] dram paras[17]: 0x1621121e
00005513 13237.42871094 [23824] dram paras[18]: 0x0
00005514 13237.42871094 [23824] dram paras[19]: 0x0
00005515 13237.42871094 [23824] dram paras[20]: 0x0
00005516 13237.42871094 [23824] dram paras[21]: 0x220000
00005517 13237.42871094 [23824] dram paras[22]: 0x57
00005518 13237.42968750 [23824] dram paras[23]: 0x34056103
00005519 13237.42968750 [23824] dram paras[24]: 0x0
00005520 13237.42968750 [23824] dram paras[25]: 0x0
00005521 13237.43066406 [23824] dram paras[26]: 0x0
00005522 13237.43066406 [23824] dram paras[27]: 0x0
00005523 13237.43164063 [23824] dram paras[28]: 0x0
00005524 13237.43164063 [23824] dram paras[29]: 0x0
00005525 13237.43164063 [23824] dram paras[30]: 0x0
00005526 13237.43164063 [23824] dram paras[31]: 0x0
00005527 13237.43164063 [23824] RUN fes1 OK.
00005528 13237.43261719 [23824] INFO: try to down and run fes2
00005529 13237.43261719 [23824] Img_OpenItem now!
00005530 13237.43261719 [23824] Img_OpenItem[12345678][UBOOT_0000000000]
00005531 13237.43359375 [23824] fes2 size 0xe0000
00005532 13237.44140625 [23824] uboot down and run addr 0x43000000
00005533 13237.44140625 [23824] dtb_syscfg_base 0x43200000
00005534 13238.23632813 [12568] [magic cube] loading file : c:\program files (x86)\mydrivers\drivergenius\data\raw_record.dat
00005535 13238.24804688 [12568] [magic cube] file not modify, no need to load again
00005536 13238.26562500 [12568] [magic cube] loading file : c:\program files (x86)\mydrivers\drivergenius\data\raw_record.dat
00005537 13238.28710938 [12568] [magic cube] file not modify, no need to load again
00005538 13238.30664063 [12568] [magic cube] loading file : c:\program files (x86)\mydrivers\drivergenius\data\raw_record.dat
00005539 13238.33105469 [12568] [magic cube] file not modify, no need to load again
00005540 13239.19238281 [23824] INFO: try to down dtb at 0x43200000
00005541 13239.19238281 [23824] Img_OpenItem now!
00005542 13239.19238281 [23824] Img_OpenItem[COMMON ][DTB_CONFIG000000]
00005543 13239.19238281 [23824] down_dtb_syscfg size 0x1c000
00005544 13239.42382813 [23824] INFO: try to down soc cfg at 0x43300000
00005545 13239.42382813 [23824] Img_OpenItem now!
00005546 13239.42382813 [23824] Img_OpenItem[COMMON ][SYS_CONFIG_BIN00]
00005547 13239.42382813 [23824] down_dtb_syscfg size 0x1800
00005548 13239.43847656 [23824] INFO: try to down board cfg at 0x43380000
00005549 13239.43847656 [23824] Img_OpenItem now!
00005550 13239.43847656 [23824] Img_OpenItem[COMMON ][BOARD_CONFIG_BIN]
00005551 13239.43847656 [23824] Img_OpenItem: cannot find item COMMON BOARD_CONFIG_BIN
00005552 13239.43847656 [23824] PANIC : down_dtb_syscfg() : can not open fes2 item
00005553 13239.43847656 [23824] board config item empty,do not need to down!
00005554 13239.43847656 [23824] INFO: down dtb syscfg OK
00005555 13239.43847656 [23824] INFO: down fes2 ok
00005556 13239.43945313 [23824] INFO: run fes2 ok
00005557 13239.43945313 [23824] Closing image now!
00005558 13239.43945313 [23824] CloseImage OK
00005559 13239.43945313 [23824] *********** after Fel2Fes *********
00005560 13239.68261719 [12568] [magic cube] loading file : c:\program files (x86)\mydrivers\drivergenius\data\raw_record.dat
00005561 13239.68261719 [12568] [magic cube] file not modify, no need to load again
00005562 13239.68261719 [12568] [magic cube] loading file : c:\program files (x86)\mydrivers\drivergenius\data\raw_record.dat
00005563 13239.68261719 [12568] [magic cube] file not modify, no need to load again
00005564 13239.68359375 [12568] [magic cube] loading file : c:\program files (x86)\mydrivers\drivergenius\data\raw_record.dat
00005565 13239.68457031 [12568] [magic cube] file not modify, no need to load again
00005566 13240.57031250 [23824] OUT 1
00005567 13241.50097656 [12568] [magic cube] loading file : c:\program files (x86)\mydrivers\drivergenius\data\raw_record.dat
00005568 13241.50195313 [12568] [magic cube] file not modify, no need to load again
00005569 13241.50195313 [12568] [magic cube] loading file : c:\program files (x86)\mydrivers\drivergenius\data\raw_record.dat
00005570 13241.50195313 [12568] [magic cube] file not modify, no need to load again
00005571 13241.50292969 [12568] [magic cube] loading file : c:\program files (x86)\mydrivers\drivergenius\data\raw_record.dat
00005572 13241.50292969 [12568] [magic cube] file not modify, no need to load again
00005573 13243.61425781 [23824] IN 1
00005574 13243.62500000 [23824] Wait for fes device in time
00005575 13243.62500000 [23824] Open D:\01_hzhy\01_work\03_ZYNQ\07_aimedAt_S3\03_FTP\Tools\PhoenixSuit1.18\image_dl.para failed
00005576 13243.62597656 [23824] priv_info = 0x74f2ee8
00005577 13243.62597656 [23824] erase flash flag 0
00005578 13243.63378906 [23824] 剩余 1 分 24 秒
00005579 13243.63378906 [23824]
00005580 13243.63476563 [23824] set erase flag 0
00005581 13243.64550781 [23824] fes_check_crc.media_crc=0
00005582 13243.64550781 [23824] ID=5, fes_thread() : get download map
00005583 13243.64550781 [23824] 剩余 1 分 22 秒
00005584 13243.64550781 [23824]
00005585 13243.64746094 [23824] fes_thread, get download map
00005586 13243.64843750 [23824] Img_OpenItem now!
00005587 13243.64843750 [23824] Img_OpenItem[12345678][1234567890DLINFO]
00005588 13243.65039063 [23824] *************DOWNLOAD MAP DUMP************
00005589 13243.65039063 [23824] total download part 5
00005590 13243.65039063 [23824]
00005591 13243.65039063 [23824] download part[0] name :boot-resource
00005592 13243.65039063 [23824] download part[0] download file:BOOT-RESOURCE_FE
00005593 13243.65039063 [23824] download part[0] verify file :VBOOT-RESOURCE_F
00005594 13243.65039063 [23824] download part[0] lenlo :0x1780
00005595 13243.65039063 [23824] download part[0] addrlo :0x20
00005596 13243.65136719 [23824] download part[0] encrypt :0
00005597 13243.65136719 [23824] download part[0] verify :1
00005598 13243.65136719 [23824]
00005599 13243.65136719 [23824] download part[1] name :boot
00005600 13243.65136719 [23824] download part[1] download file:BOOT_FEX00000000
00005601 13243.65136719 [23824] download part[1] verify file :VBOOT_FEX0000000
00005602 13243.65136719 [23824] download part[1] lenlo :0x1e00
00005603 13243.65136719 [23824] download part[1] addrlo :0x17a0
00005604 13243.65136719 [23824] download part[1] encrypt :0
00005605 13243.65136719 [23824] download part[1] verify :1
00005606 13243.65136719 [23824]
00005607 13243.65136719 [23824] download part[2] name :rootfs
00005608 13243.65136719 [23824] download part[2] download file:ROOTFS_FEX000000
00005609 13243.65136719 [23824] download part[2] verify file :VROOTFS_FEX00000
00005610 13243.65136719 [23824] download part[2] lenlo :0x2e00
00005611 13243.65234375 [23824] download part[2] addrlo :0x35a0
00005612 13243.65234375 [23824] download part[2] encrypt :0
00005613 13243.65234375 [23824] download part[2] verify :1
00005614 13243.65234375 [23824]
00005615 13243.65234375 [23824] download part[3] name :extend
00005616 13243.65234375 [23824] download part[3] download file:USR_FEX000000000
00005617 13243.65234375 [23824] download part[3] verify file :VUSR_FEX00000000
00005618 13243.65234375 [23824] download part[3] lenlo :0x5e00
00005619 13243.65234375 [23824] download part[3] addrlo :0x63a0
00005620 13243.65234375 [23824] download part[3] encrypt :0
00005621 13243.65234375 [23824] download part[3] verify :1
00005622 13243.65234375 [23824]
00005623 13243.65332031 [23824] download part[4] name :env
00005624 13243.65332031 [23824] download part[4] download file:ENV_NOR_FEX00000
00005625 13243.65332031 [23824] download part[4] verify file :VENV_NOR_FEX0000
00005626 13243.65332031 [23824] download part[4] lenlo :0x200
00005627 13243.65332031 [23824] download part[4] addrlo :0xc5a0
00005628 13243.65332031 [23824] download part[4] encrypt :0
00005629 13243.65332031 [23824] download part[4] verify :1
00005630 13243.65332031 [23824]
00005631 13243.65332031 [23824] ID=5, fes_thread() : --167--
00005632 13243.65332031 [23824] unknown Tools command.
00005633 13243.65332031 [23824] 剩余 1 分 19 秒
00005634 13243.65332031 [23824]
00005635 13243.65429688 [23824] dlbitmap = 0
00005636 13243.65429688 [23824] dlbitmap = 0x0,according the dlinfo to download.......
00005637 13243.65429688 [23824] Img_OpenItem now!
00005638 13243.65429688 [23824] Img_OpenItem[12345678][1234567890___MBR]
00005639 13243.65625000 [23824] value =0
00005640 13243.65625000 [23824] ubifs: checking part -- boot-resource
00005641 13243.65625000 [23824] Img_OpenItem now!
00005642 13243.65625000 [23824] Img_OpenItem[RFSFAT16][BOOT-RESOURCE_FEVBOOT-RESOURCE_F]
00005643 13243.65625000 [23824] id[5]:part_name = boot-resource, packet_len_high = 0x0, packet_len_low = 0x14000, pkt_name = BOOT-RESOURCE_FEVBOOT-RESOURCE_F, verify_file = VBOOT-RESOURCE_F, encrypt = 1
00005644 13243.65820313 [23824] value =0
00005645 13243.65820313 [23824] ubifs: checking part -- boot
00005646 13243.65820313 [23824] Img_OpenItem now!
00005647 13243.65820313 [23824] Img_OpenItem[RFSFAT16][BOOT_FEX00000000VBOOT_FEX0000000]
00005648 13243.65820313 [23824] id[5]:part_name = boot, packet_len_high = 0x0, packet_len_low = 0x3B7000, pkt_name = BOOT_FEX00000000VBOOT_FEX0000000, verify_file = VBOOT_FEX0000000, encrypt = 1
00005649 13243.66015625 [23824] value =0
00005650 13243.66015625 [23824] ubifs: checking part -- rootfs
00005651 13243.66015625 [23824] Img_OpenItem now!
00005652 13243.66015625 [23824] Img_OpenItem[RFSFAT16][ROOTFS_FEX000000VROOTFS_FEX00000]
00005653 13243.66015625 [23824] id[5]:part_name = rootfs, packet_len_high = 0x0, packet_len_low = 0x5C0000, pkt_name = ROOTFS_FEX000000VROOTFS_FEX00000, verify_file = VROOTFS_FEX00000, encrypt = 1
00005654 13243.66210938 [23824] value =0
00005655 13243.66210938 [23824] ubifs: checking part -- extend
00005656 13243.66210938 [23824] Img_OpenItem now!
00005657 13243.66210938 [23824] Img_OpenItem[RFSFAT16][USR_FEX000000000VUSR_FEX00000000]
00005658 13243.66210938 [23824] id[5]:part_name = extend, packet_len_high = 0x0, packet_len_low = 0x9C0000, pkt_name = USR_FEX000000000VUSR_FEX00000000, verify_file = VUSR_FEX00000000, encrypt = 1
00005659 13243.66406250 [23824] value =0
00005660 13243.66406250 [23824] ubifs: checking part -- env
00005661 13243.66406250 [23824] Img_OpenItem now!
00005662 13243.66406250 [23824] Img_OpenItem[RFSFAT16][ENV_NOR_FEX00000VENV_NOR_FEX0000]
00005663 13243.66406250 [23824] id[5]:part_name = env, packet_len_high = 0x0, packet_len_low = 0x20000, pkt_name = ENV_NOR_FEX00000VENV_NOR_FEX0000, verify_file = VENV_NOR_FEX0000, encrypt = 1
00005664 13243.66601563 [23824] ubifs: Tryt to find ubifs partition, but none is found, use ext4 interface in default.
00005665 13243.66601563 [23824] Img_OpenItem now!
00005666 13243.66601563 [23824] Img_OpenItem[12345678][1234567890___MBR]
00005667 13243.66601563 [23824] *************MBR DUMP***************
00005668 13243.66601563 [23824] total mbr part 7
00005669 13243.66601563 [23824]
00005670 13243.66601563 [23824] part[0] name :boot-resource
00005671 13243.66601563 [23824] part[0] classname :DISK
00005672 13243.66601563 [23824] part[0] addrlo :0x20
00005673 13243.66601563 [23824] part[0] lenlo :0x1780
00005674 13243.66601563 [23824] part[0] user_type :32768
00005675 13243.66601563 [23824] part[0] keydata :0
00005676 13243.66601563 [23824] part[0] ro :0
00005677 13243.66601563 [23824]
00005678 13243.66601563 [23824] part[1] name :boot
00005679 13243.66601563 [23824] part[1] classname :DISK
00005680 13243.66601563 [23824] part[1] addrlo :0x17a0
00005681 13243.66601563 [23824] part[1] lenlo :0x1e00
00005682 13243.66601563 [23824] part[1] user_type :32768
00005683 13243.66601563 [23824] part[1] keydata :0
00005684 13243.66601563 [23824] part[1] ro :0
00005685 13243.66601563 [23824]
00005686 13243.66601563 [23824] part[2] name :rootfs
00005687 13243.66601563 [23824] part[2] classname :DISK
00005688 13243.66601563 [23824] part[2] addrlo :0x35a0
00005689 13243.66601563 [23824] part[2] lenlo :0x2e00
00005690 13243.66601563 [23824] part[2] user_type :32768
00005691 13243.66601563 [23824] part[2] keydata :0
00005692 13243.66601563 [23824] part[2] ro :0
00005693 13243.66699219 [23824]
00005694 13243.66699219 [23824] part[3] name :extend
00005695 13243.66699219 [23824] part[3] classname :DISK
00005696 13243.66699219 [23824] part[3] addrlo :0x63a0
00005697 13243.66699219 [23824] part[3] lenlo :0x5e00
00005698 13243.66699219 [23824] part[3] user_type :32768
00005699 13243.66699219 [23824] part[3] keydata :0
00005700 13243.66699219 [23824] part[3] ro :0
00005701 13243.66699219 [23824]
00005702 13243.66699219 [23824] part[4] name :rootfs_data
00005703 13243.66699219 [23824] part[4] classname :DISK
00005704 13243.66699219 [23824] part[4] addrlo :0xc1a0
00005705 13243.66699219 [23824] part[4] lenlo :0x400
00005706 13243.66699219 [23824] part[4] user_type :32768
00005707 13243.66699219 [23824] part[4] keydata :0
00005708 13243.66699219 [23824] part[4] ro :0
00005709 13243.66699219 [23824]
00005710 13243.66699219 [23824] part[5] name :env
00005711 13243.66699219 [23824] part[5] classname :DISK
00005712 13243.66796875 [23824] part[5] addrlo :0xc5a0
00005713 13243.66796875 [23824] part[5] lenlo :0x200
00005714 13243.66796875 [23824] part[5] user_type :32768
00005715 13243.66796875 [23824] part[5] keydata :0
00005716 13243.66796875 [23824] part[5] ro :0
00005717 13243.66796875 [23824]
00005718 13243.66796875 [23824] part[6] name :UDISK
00005719 13243.66796875 [23824] part[6] classname :DISK
00005720 13243.66796875 [23824] part[6] addrlo :0xc7a0
00005721 13243.66796875 [23824] part[6] lenlo :0x0
00005722 13243.66796875 [23824] part[6] user_type :0
00005723 13243.66796875 [23824] part[6] keydata :0
00005724 13243.66796875 [23824] part[6] ro :0
00005725 13243.66796875 [23824]
00005726 13243.67285156 [23824] Get CSW Error
00005727 13243.67285156 [23824] PANIC : cmd_fes_down() : run fail
00005728 13243.67285156 [23824] ERR : download_mbr() : run cmd_fes_down cmd ,fail
00005729 13243.67285156 [23824] ERR : ID=5, fes_thread() : step 167 ,fail
00005730 13243.67285156 [23824]
00005731 13243.67285156 [23824] INFO: ID=5, update failed
00005732 13243.67285156 [23824]
00005733 13243.67285156 [23824] trans log buf
00005734 13243.67285156 [23824] *************************
00005735 13243.67285156 [23824] **cmd_common_get_cmd_set_vers**
00005736 13243.67285156 [23824] *************************
00005737 13243.67382813 [23824] cur version:2.0
00005738 13243.67480469 [23824] log_info.buf_start:0x0, log_info.buf_size:0x0
00005739 13243.67480469 [23824] PANIC : cmd_fes_up() : data len == 0
00005740 13245.87402344 [23824] trans log buf
00005741 13245.87402344 [23824] PANIC : cmd_common_get_cmd_set_vers() : priv_info == NULL
00005742 13245.87402344 [23824] cur version:0.0
00005743 13245.87500000 [23824] PANIC : dev_manager_open_fel_dev() : priv_info == NULL
00005744 13245.87500000 [23824] ERR : ID=5, fes_thread() : close fes ,fail
00005745 13245.87500000 [23824]
00005746 13245.87500000 [23824] INFO: ID=5, update failed
00005747 13245.87500000 [23824]
00005748 13245.87500000 [23824] Closing image now!
00005749 13245.87500000 [23824] CloseImage OK
00005750 13247.59863281 [6580] [kwpsshellext]DllCanUnloadNow, module=C:\Users\86150\AppData\Local\Kingsoft\WPS Office\11.1.0.14309\office6\kwpsshellext64.dll
00005751 13249.79199219 [12568] [magic cube] loading file : c:\program files (x86)\mydrivers\drivergenius\data\raw_record.dat
00005752 13249.79296875 [12568] [magic cube] file not modify, no need to load again
@whycanservice 实际使用介质是emmc，那就只需要修改
vim device/config/chips/v853s/configs/perf1/sys_config.fex文件内容，将默认3修改成2就可以了吧？
[target]
;storage_type = 3
storage_type = 2
ZhaoBinBin@R740:/WorkDisk/ZhaoBinBinWorkDisk/01_project/04_quanzhi/01_V853/08_env_v851s/tina-v851/tina-v851-release$ pack
--==========--
PACK_CHIP sun8iw21p1
PACK_PLATFORM tina
PACK_BOARD v853s-perf1
PACK_KERN
PACK_DEBUG uart0
PACK_SIG none
PACK_SECURE none
PACK_MODE normal
PACK_FUNC android
PACK_PROGRAMMER none
PACK_TAR_IMAGE none
PACK_TOPDIR /WorkDisk/ZhaoBinBinWorkDisk/01_project/04_quanzhi/01_V853/08_env_v851s/tina-v851/tina-v851-release
--==========--
No kernel param, parse it from v853s
copying tools file
copying configs file
storage_type value is 3
storage type is nor
image_nor.cfg is exist
mv image_nor.cfg image.cfg
copying boot resource
copying boot file
make user resource for : /WorkDisk/ZhaoBinBinWorkDisk/01_project/04_quanzhi/01_V853/08_env_v851s/tina-v851/tina-v851-release/out/v853s-perf1/image/sys_partition_nor.fex
handle partition user-res
no user resource partitions
APP_PART_DOWNLOAD_FILE = /WorkDisk/ZhaoBinBinWorkDisk/01_project/04_quanzhi/01_V853/08_env_v851s/tina-v851/tina-v851-release/out/v853s-perf1/image/app.fex
Need size of filesystem
no data resource partitions
Warning (unit_address_vs_reg): Node /clocks has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /soc@03000000 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /soc@03000000/pinctrl@02000000/uart0@0 has a unit name, but no reg property
......
Warning (unit_address_vs_reg): Node /e907_rproc@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /rpbuf_controller@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /rpbuf_sample@0 has a unit name, but no reg property
p=soc c=product state=0
p=soc c=power_sply state=0
p=soc c=target state=0
p=soc c=card_boot state=0
p=soc c=card0_boot_para state=0
p=soc c=card2_boot_para state=0
p=soc c=spinor_para state=0
p=soc c=twi_para state=0
p=soc c=uart_para state=0
p=soc c=jtag_para state=0
p=soc c=dram state=0
p=soc c=partitions state=0
p=partitions c=boot-resource state=0
p=partitions c=boot state=0
p=partitions c=rootfs state=0
p=partitions c=extend state=0
p=partitions c=rootfs_data state=0
p=partitions c=env state=0
p=partitions c=UDISK state=0
Warning (unit_address_vs_reg): Node /clocks has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /soc@03000000 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /soc@03000000/pinctrl@02000000/uart0@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /soc@03000000/pinctrl@02000000/uart0@1 has a unit name, but no reg property
......
Warning (unit_address_vs_reg): Node /opp_l_table0/opp@1200000000-100 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /opp_l_table0/opp@1200000000-105 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /ion/heap_sys_user@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /ion/heap_cma@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /interrupt-controller@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /sram_ctrl has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /thermal-zones/cpu_thermal_zone/trips/trip-point@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /thermal-zones/cpu_thermal_zone/trips/trip-point@1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /thermal-zones/cpu_thermal_zone/trips/cpu_crit@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /e907_rproc@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /rpbuf_controller@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /rpbuf_sample@0 has a unit name, but no reg property
mv: 'temp_fdt.dtb' and '/WorkDisk/ZhaoBinBinWorkDisk/01_project/04_quanzhi/01_V853/08_env_v851s/tina-v851/tina-v851-release/out/v853s-perf1/image/temp_fdt.dtb' are the same file
mv: 'temp_ubootnodtb.bin' and '/WorkDisk/ZhaoBinBinWorkDisk/01_project/04_quanzhi/01_V853/08_env_v851s/tina-v851/tina-v851-release/out/v853s-perf1/image/temp_ubootnodtb.bin' are the same file
Warning (unit_address_vs_reg): Node /clocks has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /soc@29000000 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /soc@29000000/power_sply@4500000c has a unit name, but no reg property
......
Warning (unit_address_vs_reg): Node /soc@29000000/clk_test@0x12345 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /aliases@45100000 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /gpu@0x01800000 has a unit name, but no reg property
Conver script to dts ok.
don't build dtbo ...
update_chip
mv: cannot stat 'u-boot-spinor-crash.fex': No such file or directory
pack boot package
GetPrivateProfileSection read to end
content_count=3
卡住了
@whycanservice 实际使用介质是emmc的
vim device/config/chips/v853s/configs/perf1/linux/sys_partition.fex
[partition_start]
[partition]
name = boot-resource
size = 6016
downloadfile = "boot-resource.fex"
user_type = 0x8000
[partition]
name = env
size = 1008
downloadfile = "env.fex"
user_type = 0x8000
[partition]
name = boot
;size = 4096
size = 25200
downloadfile = "boot.fex"
user_type = 0x8000
[partition]
name = rootfs
size = 25200
downloadfile = "rootfs.fex"
user_type = 0x8000
[partition]
name = rootfs_data
size = 10080
user_type = 0x8000
[partition]
name = recovery
size = 20160
;downloadfile = "recovery.fex"
user_type = 0x8000
;
;[partition]
; name = misc
; size = 512
; user_type = 0x8000
;
;[partition]
; name = private
; size = 512
; user_type = 0x8000
[partition]
name = UDISK
user_type = 0x8100
vim device/config/chips/v853s/configs/perf1/sys_config.fex
[product]
version = "100"
machine = "evb"
;----------------------------------------------------------------------------------
; system configuration
; ?
;dcdc1_vol ---set dcdc1 voltage,mV,1600-3400,100mV/step
;dcdc2_vol ---set dcdc2 voltage,mV,600-1540,20mV/step
;dcdc3_vol ---set dcdc3 voltage,mV,600-1860,20mV/step
;dcdc4_vol ---set dcdc4 voltage,mV,600-1540,20mV/step
;dcdc5_vol ---set dcdc5 voltage,mV,1000-2550,50mV/step
;aldo2_vol ---set aldo2 voltage,mV,700-3300,100mV/step
;aldo3_vol ---set aldo3 voltage,mV,700-3300,100mV/step
;----------------------------------------------------------------------------------
[power_sply]
dcdc1_vol = 3000
dcdc2_vol = 1200
dcdc3_vol = 1200
dcdc4_vol = 1200
dcdc5_vol = 1500
aldo2_vol = 1800
aldo3_vol = 3000
;----------------------------------------------------------------------------------
; 7-6 bit 5-0 bit
;power_mode = grain_size|vol 设置系统电压，=0则不设置，范围900~1200mV
;grain_size = 电压粒度 0:10mV 1:20mV 2:50mV 3:100mV
;vol = 电压系数 =0则不设置
;grain_size=0电压公式：sys_vol = 500mV + vol * 10mV
;grain_size=1电压公式：sys_vol = 500mV + vol * 20mV
;grain_size=2电压公式：sys_vol = 500mV + vol * 50mV
;grain_size=3电压公式：sys_vol = 500mV + vol * 100mV
;----------------------------------------------------------------------------------
[target]
storage_type = 3
nand_use_ubi = 1
power_mode = 0
[card_boot]
logical_start = 40960
sprite_gpio0 =
[card0_boot_para]
card_ctrl = 0
card_high_speed = 1
card_line = 4
sdc_d1 = port:PF0<2><1><default><default>
sdc_d0 = port:PF1<2><1><default><default>
sdc_clk = port:PF2<2><1><default><default>
sdc_cmd = port:PF3<2><1><default><default>
sdc_d3 = port:PF4<2><1><default><default>
sdc_d2 = port:PF5<2><1><default><default>
[card2_boot_para]
card_ctrl = 2
card_high_speed = 1
card_line = 8
sdc_clk = port:PC0<3><1><3><default>
sdc_cmd = port:PC1<3><1><3><default>
sdc_d0 = port:PC2<3><1><3><default>
sdc_d1 = port:PC3<3><1><3><default>
sdc_d2 = port:PC4<3><1><3><default>
sdc_d3 = port:PC5<3><1><3><default>
sdc_d4 = port:PC6<3><1><3><default>
sdc_d5 = port:PC7<3><1><3><default>
sdc_d6 = port:PC8<3><1><3><default>
sdc_d7 = port:PC9<3><1><3><default>
sdc_emmc_rst = port:PC11<3><1><3><default>
sdc_ds = port:PC10<3><2><3><default>
[spinor_para]
;read_mode =4
;flash_size =16
;delay_cycle =1
;frequency =100000000
spi_sclk = port:PC00<4><0><2><default>
spi_cs = port:PC01<4><1><2><default>
spi0_mosi = port:PC02<4><0><2><default>
spi0_miso = port:PC03<4><0><2><default>
spi0_wp = port:PC04<4><0><2><default>
spi0_hold = port:PC05<4><0><2><default>
[twi_para]
twi_used = 1
twi_port = 4
twi_scl = port:PI01<6><1><default><default>
twi_sda = port:PI02<6><1><default><default>
[uart_para]
uart_debug_port = 0
uart_debug_tx = port:PH09<5><1><default><default>
uart_debug_rx = port:PH10<5><1><default><default>
[jtag_para]
jtag_enable = 0
jtag_ms = port:PH11<2><default><default><default>
jtag_ck = port:PH12<2><default><default><default>
jtag_do = port:PH13<2><default><default><default>
jtag_di = port:PH14<2><default><default><default>
;*****************************************************************************
;sdram configuration
;
;*****************************************************************************
[dram_para]
dram_clk = 936
dram_type = 3
dram_zq = 0x7b7bfb
dram_odt_en = 0x1
dram_para1 = 0x0010f2
dram_para2 = 0x0
dram_mr0 = 0x1c70
dram_mr1 = 0x42
dram_mr2 = 0x18
dram_mr3 = 0x0
dram_tpr0 = 0x004A2195
dram_tpr1 = 0x02423190
dram_tpr2 = 0x0008B061
dram_tpr3 = 0xB4787896
dram_tpr4 = 0x0
dram_tpr5 = 0x48484848
dram_tpr6 = 0x48
dram_tpr7 = 0x1621121e
dram_tpr8 = 0x0
dram_tpr9 = 0x0
dram_tpr10 = 0x0
dram_tpr11 = 0x00220000
dram_tpr12 = 0x00000057
dram_tpr13 = 0x34050100
其他附件都源于路径 device/config/chips/v853s/configs/perf1下。uboot-board.dts sys_config.fex board.dts sys_partition_nor.fex sys_partition.fex env-4.9.cfg config-4.9 bootlogo.fex
@whycanservice 我使用过这个SDK包，1）source build/envsetup.sh; 2)lunch 选择v853s_perf1-tina； 3）mp 程序卡住，停留如下：
arning (unit_address_vs_reg): Node /soc@29000000/nand0@04011000 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /soc@29000000/spi@4025000/spi_board0 has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /soc@29000000/lcd0@05461000 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /soc@29000000/clk_test@0x12345 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /aliases@45100000 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /gpu@0x01800000 has a unit name, but no reg property
Conver script to dts ok.
don't build dtbo ...
update_chip
mv: cannot stat 'u-boot-spinor-crash.fex': No such file or directory
pack boot package
GetPrivateProfileSection read to end
content_count=3
请问 这个该如何修改一下
1）下载v853s的SDK，下载链接为：
【超级会员V5】通过百度网盘分享的文件：tina-v851.tar.gz
链接:https://pan.baidu.com/s/1GIK5xT8iv1iRYPJkFdOH0g?pwd=v853
提取码:v853
2）编译过程如下：
2.1）source build/envsetup.sh；
2.2）lunch 此处选择v853s_perf1-tina；
2.3) mp 程序执行卡住，停留如下：
arning (unit_address_vs_reg): Node /soc@29000000/nand0@04011000 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /soc@29000000/spi@4025000/spi_board0 has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /soc@29000000/lcd0@05461000 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /soc@29000000/clk_test@0x12345 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /aliases@45100000 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /gpu@0x01800000 has a unit name, but no reg property
Conver script to dts ok.
don't build dtbo ...
update_chip
mv: cannot stat 'u-boot-spinor-crash.fex': No such file or directory
pack boot package
GetPrivateProfileSection read to end
content_count=3
请麻烦帮忙看下是什么问题，谢谢！
@whycanservice 您好，能提供一个V853S的SDK么。
我修改了vim device/config/chips/v853/configs/vision/sys_config.fex
;dram_tpr11 = 0x00420000
;dram_tpr12 = 0x00000048
;dram_tpr13 = 0x34010100
;hzhy add v853s perf1
dram_tpr11 = 0x00220000
dram_tpr12 = 0x00000057
dram_tpr13 = 0x34050100
修改后，V853s可以烧写进入 但是串口打印显示初始化dram失败，打印结果如下：
[198]HELLO! BOOT0 is starting!
[200]BOOT0 commit : 2a3ec52022
[203]set pll start
[205]periph0 has been enabled
[208]set pll end
[211]PMU: AXP21
[214]board init ok
[216]DRAM use external ZQ!!
[218]bootinfo error 3
[220]ic cant match axp, please check...
[224]init dram fail
CCC
请问，我这么修改可以么？