使用A40i的spi转串口，spi2 ，串口芯片是wk2412。
目前的问题：使用转出来的串口进行收发数据（比如发送123）大多数情况下会有1s左右的延迟才能接收到，比较好的情况是几乎感受不到延迟，最差的情况是接收到123时需要等待6s左右。
不知道有没有大佬遇到过这种情况，希望能提供一些解决办法或者思路，谢谢。
M
MasterLu 发布的最佳帖子
MasterLu 发布的最新帖子
-
T527 修改分辨率后显示异常发布在 T527系列-工业车载
配置成1280x800时正常
配置成1024x600时异常
可以看到，1280x800时error为1，后面没有出现err，1024x600时一直出现err
不知道是什么问题，麻烦大佬帮忙看下 -
回复: T527烧写安全固件后无法启动发布在 T527系列-工业车载
@awwwwa 烧写dragonboard固件的时候是没有烧写rotpak.bin的，当时也是无法启动，并且无法烧录非安全固件，当时没有仔细去看日志，误以为烧写rotpk.bin后可以启动，或者可以烧写非安全固件。
从日志上看是创建keystoreService时，connect keymint Service报错，而前面启动 aw keymint service的时候应该是没问题的。[ 12.928598][ T226] DEBUG: Abort message: 'Failed to create service android.system.keystore2.IKeystoreService/default because of In KeystoreService::new_native_binder: Trying to construct mandatory security level TEE. [ 12.959109][ T226] DEBUG: [ 12.962248][ T226] DEBUG: Caused by: [ 12.966371][ T226] DEBUG: 0: In KeystoreSecurityLevel::new_native_binder. [ 12.974471][ T226] DEBUG: 1: In get_keymint_device. [ 12.980423][ T226] DEBUG: 2: In connect_keymint: Trying to connect to genuine KeyMint service. [ 12.990575][ T226] DEBUG: 3: Binder transaction error NAME_NOT_FOUND.'这几行log的位置分别在 system\security\keystore2\src目录下的 security_level.rs、globals.rs、errors.rs中。
这部分代码我不太理解
-
T527烧写安全固件后无法启动发布在 T527系列-工业车载
T527 Android13 照着文档编译DragonBoard和android二合一固件，照着文档的打包命令生成了secure固件，烧录成功后无法启动，此时未烧录rotpk.bin。
接着试着烧回非安全固件，发现烧不了。
目前想要让安全固件能够启动，下面是安全固件的启动log（已经烧录rotpk.bin）：U-Boot 2018.07-g9b0fc4c-dirty (Oct 12 2023 - 18:16:20 +0800) Allwinner Technology [00.653]CPU: Allwinner Family [00.656]Model: sun55iw3 I2C: ready [00.666]DRAM: 4 GiB [00.670]Relocation Offset is: 6e6cd000 [00.708]secure enable bit: 1 [00.711]smc_tee_inform_fdt failed with: ffff000a [00.716]PMU: AXP2202 [00.719]BMU: AXP2202 [00.720][AXP2202] comm status : 0x0 = 0x20, 0x1 = 0x90 [00.725][AXP2202] onoff status: 0x20 = 0x4, 0x21 = 0x0 [00.730][AXP2202] reboot/charge status: 0xf0 = 0x0 bias_name:pc_bias bias_vol:1800 [00.747]PMU: AXP1530 [00.749]CPU=1296 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz MBus=600Mhz [00.755]gic: sec monitor mode sunxi flash map init [00.760]flash init start [00.762]workmode = 0,storage type = 2 [00.766][mmc]: mmc driver ver uboot2018:2023-07-4 16:18:00 [00.772][mmc]: SUNXI SDMMC Controller Version:0x50500 [00.796][mmc]: Best spd md: 4-HS400, freq: 4-150000000, Bus width: 8 [00.802]sunxi flash init ok [00.804]drv_disp_init [00.861]Item0 (Map) magic is bad [00.864]the secure storage item0 copy0 magic is bad [00.876]Item0 (Map) magic is bad [00.878]the secure storage item0 copy1 magic is bad [00.883]Item0 (Map) magic is bad erase secure storage failed [00.911]drv_disp_init finish [00.925]Loading Environment from SUNXI_FLASH... OK [00.931]boot_gui_init:start disp_devices_open start: 0 end: 1 dev_num: 1 actual_dev_num: 2 [00.951]boot_gui_init:finish ** Unable to read file advert.crc ** [00.957]sunxi bmp info error : unable to open logo file[00.964]LCD open finish sunxi_flash [00.968]bmp_name=bootlogo.bmp size 3072054 [01.001]Item0 (Map) magic is bad [01.004]the secure storage item0 copy0 magic is bad [01.015]Item0 (Map) magic is bad [01.018]the secure storage item0 copy1 magic is bad [01.022]Item0 (Map) magic is bad secure storage read widevine fail [01.028]secure storage read widevine fail with:-1 secure storage read ec_key fail [01.036]secure storage read ec_key fail with:-1 secure storage read hdcpkey fail [01.043]secure storage read hdcpkey fail with:-1 [01.047]usb burn from boot delay time 0 weak:otg_phy_config [01.058]usb prepare ok [01.249]usb sof ok [01.250]usb probe ok [01.252]usb setup ok set address 0x39 set address 0x39 ok [01.659]do_burn_from_boot usb : have no handshake skip update boot_param List file under ULI/factory ** Unrecognized filesystem type ** [01.675]update part info [01.691]update bootcmd [01.772]change working_fdt 0xb467ce50 to 0xb464ce50 [01.780]The storage not support sample function [01.797]update dts Hit any key to stop autoboot: 0 pubkey vbmeta_a valid CACHE: Misaligned operation at range [4fffffe0, 52c1d020] ramdisk use init boot Android's image name: arm64 [02.390]Starting kernel ... [02.392][mmc]: mmc exit start [02.410][mmc]: mmc 2 exit ok NOTICE: [SCP] :wait arisc ready.... NOTICE: [SCP] :arisc version: [toia25t-na-7iord-31d0.1v-5crhpla0v-a-69.trid] NOTICE: [SCP] :arisc startup ready NOTICE: [SCP] :arisc startup notify message feedback NOTICE: [SCP] :sunxi-arisc driver is starting BL3-1: Next image address = 0x40080000 BL3-1: Next image spsr = 0x3c5 [ 0.000000][ T0] Booting Linux on physical CPU 0x0000000000 [0x412fd050] [ 0.000000][ T0] Linux version 5.15.104-aiot-t527-android13-v1.0rc5-alpha-v0.96 (lizhi@bsp2) (Android (8490178, based on r450784d) clang version 14.0.6 (https://android.googlesource.com/toolchain/llvm-project 4c603efb0cca074e9238af8b4106c30add4418f6), LLD 14.0.6) #3 SMP PREEMPT Thu Oct 12 18:18:02 CST 2023 [ 0.000000][ T0] Machine model: sun55iw3 [ 0.000000][ T0] Stack Depot is disabled [ 0.000000][ T0] KVM is not available. Ignoring kvm-arm.mode [ 0.000000][ T0] earlycon: uart8250 at MMIO32 0x0000000002500000 (options '') [ 0.000000][ T0] printk: bootconsole [uart8250] enabled [ 0.000000][ T0] efi: UEFI not found. [ 0.000000][ T0] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader! [ 0.000000][ T0] OF: reserved mem: 0x0000000000020000..0x000000000002ffff (64 KiB) nomap non-reusable dsp0iram@20000 [ 0.000000][ T0] OF: reserved mem: 0x0000000000030000..0x0000000000037fff (32 KiB) nomap non-reusable dsp0dram0@30000 [ 0.000000][ T0] OF: reserved mem: 0x0000000000038000..0x000000000003ffff (32 KiB) nomap non-reusable dsp0dram1@38000 [ 0.000000][ T0] OF: reserved mem: 0x0000000007280000..0x00000000072bffff (256 KiB) nomap non-reusable riscvsram0@7280000 [ 0.000000][ T0] OF: reserved mem: 0x00000000072c0000..0x00000000072fffff (256 KiB) nomap non-reusable riscvsram1@72c0000 [ 0.000000][ T0] OF: reserved mem: 0x0000000048000000..0x0000000048ffffff (16384 KiB) map non-reusable bl31 [ 0.000000][ T0] OF: reserved mem: 0x000000004a000000..0x000000004a9fffff (10240 KiB) nomap non-reusable dsp0ddr@4a000000 [ 0.000000][ T0] OF: reserved mem: 0x000000004ab00000..0x000000004ab0ffff (64 KiB) nomap non-reusable dsp_share_space@4ab00000 [ 0.000000][ T0] Reserved memory: created DMA memory pool at 0x000000004ac00000, size 0 MiB [ 0.000000][ T0] OF: reserved mem: initialized node vdev0buffer@4ac00000, compatible id shared-dma-pool [ 0.000000][ T0] OF: reserved mem: 0x000000004ac00000..0x000000004ac3ffff (256 KiB) nomap non-reusable vdev0buffer@4ac00000 [ 0.000000][ T0] OF: reserved mem: 0x000000004ac40000..0x000000004ac41fff (8 KiB) nomap non-reusable vdev0vring0@4ac40000 [ 0.000000][ T0] OF: reserved mem: 0x000000004ac42000..0x000000004ac43fff (8 KiB) nomap non-reusable vdev0vring1@4ac42000 [ 0.000000][ T0] Reserved memory: created DMA memory pool at 0x000000004ae00000, size 0 MiB [ 0.000000][ T0] OF: reserved mem: initialized node vdev0buffer@4ae00000, compatible id shared-dma-pool [ 0.000000][ T0] OF: reserved mem: 0x000000004ae00000..0x000000004ae3ffff (256 KiB) nomap non-reusable vdev0buffer@4ae00000 [ 0.000000][ T0] OF: reserved mem: 0x000000004ae40000..0x000000004ae41fff (8 KiB) nomap non-reusable vdev0vring0@4ae40000 [ 0.000000][ T0] OF: reserved mem: 0x000000004ae42000..0x000000004ae43fff (8 KiB) nomap non-reusable vdev0vring1@4ae42000 [ 0.000000][ T0] Reserved memory: created DMA memory pool at 0x000000004ae44000, size 0 MiB [ 0.000000][ T0] OF: reserved mem: initialized node dsp0_rpbuf@4ae44000, compatible id shared-dma-pool [ 0.000000][ T0] OF: reserved mem: 0x000000004ae44000..0x000000004ae4bfff (32 KiB) nomap non-reusable dsp0_rpbuf@4ae44000 [ 0.000000][ T0] Zone ranges: [ 0.000000][ T0] DMA32 [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000][ T0] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000][ T0] Movable zone start for each node [ 0.000000][ T0] Early memory node ranges [ 0.000000][ T0] node 0: [mem 0x0000000040000000-0x0000000049ffffff] [ 0.000000][ T0] node 0: [mem 0x000000004a000000-0x000000004a9fffff] [ 0.000000][ T0] node 0: [mem 0x000000004aa00000-0x000000004aafffff] [ 0.000000][ T0] node 0: [mem 0x000000004ab00000-0x000000004ab0ffff] [ 0.000000][ T0] node 0: [mem 0x000000004ab10000-0x000000004abfffff] [ 0.000000][ T0] node 0: [mem 0x000000004ac00000-0x000000004ac43fff] [ 0.000000][ T0] node 0: [mem 0x000000004ac44000-0x000000004adfffff] [ 0.000000][ T0] node 0: [mem 0x000000004ae00000-0x000000004ae4bfff] [ 0.000000][ T0] node 0: [mem 0x000000004ae4c000-0x000000013fffffff] [ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff] [ 0.000000][ T0] cma: Reserved 8 MiB at 0x00000000ff800000 [ 0.000000][ T0] psci: probing for conduit method from DT. [ 0.000000][ T0] psci: PSCIv1.1 detected in firmware. [ 0.000000][ T0] psci: Using standard PSCI v0.2 function IDs [ 0.000000][ T0] psci: Trusted OS migration not required [ 0.000000][ T0] psci: SMC Calling Convention v1.2 [ 0.000000][ T0] Load bootconfig: 792 bytes 50 nodes [ 0.000000][ T0] percpu: Embedded 29 pages/cpu s81688 r8192 d28904 u118784 [ 0.000000][ T0] pcpu-alloc: s81688 r8192 d28904 u118784 alloc=29*4096 [ 0.000000][ T0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000][ T0] Detected VIPT I-cache on CPU0 [ 0.000000][ T0] CPU features: SYS_ID_AA64MMFR1_EL1[11:8]: forced to 0 [ 0.000000][ T0] CPU features: detected: GIC system register CPU interface [ 0.000000][ T0] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000][ T0] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000][ T0] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009 [ 0.000000][ T0] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 1032192 [ 0.000000][ T0] Kernel command line: stack_depot_disable=on kasan.stacktrace=off kvm-arm.mode=protected cgroup_disable=pressure rcutree.rcu_idle_gp_delay=1 cpufreq.default_governor=performance earlycon=uart8250,mmio32,0x02500000 clk_ignore_unused= initcall_debug=0 console=ttyAS0,115200 loglevel=8 root=/dev/mmcblk0p4 init=/init cma=8M snum=0167572d1080c801cd1 mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 boot_type=2 gpt=1 uboot_message=2018.07-g9b0fc4c-dirty(10/12/2023-18:16:20) disp_reserve=4096000,0xb4756000 bootreason=usb loop.max_part=4 mmcblk.perdev_minors=16 firmware_class.path=/vendor/etc/firmware bootconfig buildvariant=userdebug [ 0.000000][ T0] cgroup: Disabling pressure control group feature [ 0.000000][ T0] Unknown kernel command line parameters "snum=0167572d1080c801cd1 mac_addr= wifi_mac= bt_mac= specialstr= boot_type=2 uboot_message=2018.07-g9b0fc4c-dirty(10/12/2023-18:16:20) disp_reserve=4096000,0xb4756000 buildvariant=userdebug", will be passed to user space. [ 0.000000][ T0] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000][ T0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000][ T0] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.000000][ T0] software IO TLB: mapped [mem 0x00000000fb800000-0x00000000ff800000] (64MB) [ 0.000000][ T0] Memory: 3815384K/4194304K available (19584K kernel code, 4142K rwdata, 19848K rodata, 1472K init, 700K bss, 370728K reserved, 8192K cma-reserved) [ 0.000000][ T0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000][ T0] trace event string verifier disabled [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] rcu: RCU event tracing is enabled. [ 0.000000][ T0] rcu: RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000][ T0] rcu: RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8. [ 0.000000][ T0] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.000000][ T0] Trampoline variant of Tasks RCU enabled. [ 0.000000][ T0] Tracing variant of Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000][ T0] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000][ T0] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000][ T0] GICv3: 256 SPIs implemented [ 0.000000][ T0] GICv3: 0 Extended SPIs implemented [ 0.000000][ T0] GICv3: Distributor has no Range Selector support [ 0.000000][ T0] Root IRQ handler: gic_handle_irq.10d7cf410c142aff6d31b6303c3f9f87.cfi_jt [ 0.000000][ T0] GICv3: 16 PPIs implemented [ 0.000000][ T0] GICv3: CPU0: found redistributor 0 region 0:0x0000000003460000 [ 0.000000][ T0] ITS: No ITS available, not enabling LPIs [ 0.000000][ T0] rcu: Offload RCU callbacks from CPUs: (none). [ 0.000000][ T0] kfence: initialized - using 524288 bytes for 63 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.000000][ T0] arch_timer: cp15 timer(s) running at 24.00MHz (virt). [ 0.000000][ T0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000][ T0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.010605][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.022644][ T0] pid_max: default: 32768 minimum: 301 [ 0.028720][ T0] LSM: Security Framework initializing [ 0.034621][ T0] SELinux: Initializing. [ 0.039086][ T0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.047984][ T0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.059823][ T1] rcu: Hierarchical SRCU implementation. [ 0.067328][ T1] EFI services will not be available. [ 0.073708][ T1] smp: Bringing up secondary CPUs ... [ 0.079746][ T0] Detected VIPT I-cache on CPU1 [ 0.079781][ T0] GICv3: CPU1: found redistributor 100 region 0:0x0000000003480000 [ 0.079822][ T0] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] [ 0.080643][ T0] Detected VIPT I-cache on CPU2 [ 0.080673][ T0] GICv3: CPU2: found redistributor 200 region 0:0x00000000034a0000 [ 0.080707][ T0] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] [ 0.081537][ T0] Detected VIPT I-cache on CPU3 [ 0.081563][ T0] GICv3: CPU3: found redistributor 300 region 0:0x00000000034c0000 [ 0.081592][ T0] CPU3: Booted secondary processor 0x0000000300 [0x412fd050] [ 0.082366][ T0] Detected VIPT I-cache on CPU4 [ 0.082395][ T0] GICv3: CPU4: found redistributor 400 region 0:0x00000000034e0000 [ 0.082426][ T0] CPU4: Booted secondary processor 0x0000000400 [0x412fd050] [ 0.083248][ T0] Detected VIPT I-cache on CPU5 [ 0.083277][ T0] GICv3: CPU5: found redistributor 500 region 0:0x0000000003500000 [ 0.083307][ T0] CPU5: Booted secondary processor 0x0000000500 [0x412fd050] [ 0.084116][ T0] Detected VIPT I-cache on CPU6 [ 0.084144][ T0] GICv3: CPU6: found redistributor 600 region 0:0x0000000003520000 [ 0.084171][ T0] CPU6: Booted secondary processor 0x0000000600 [0x412fd050] [ 0.084929][ T0] Detected VIPT I-cache on CPU7 [ 0.084957][ T0] GICv3: CPU7: found redistributor 700 region 0:0x0000000003540000 [ 0.084985][ T0] CPU7: Booted secondary processor 0x0000000700 [0x412fd050] [ 0.085088][ T1] smp: Brought up 1 node, 8 CPUs [ 0.239418][ T1] SMP: Total of 8 processors activated. [ 0.245342][ T1] CPU features: detected: 32-bit EL0 Support [ 0.251742][ T1] CPU features: detected: 32-bit EL1 Support [ 0.258143][ T1] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.267438][ T1] CPU features: detected: Common not Private translations [ 0.275080][ T1] CPU features: detected: CRC32 instructions [ 0.281488][ T1] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.288565][ T1] CPU features: detected: LSE atomic instructions [ 0.295450][ T1] CPU features: detected: Privileged Access Never [ 0.302331][ T1] CPU features: detected: RAS Extension Support [ 0.309019][ T1] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.343693][ T1] CPU: All CPU(s) started at EL1 [ 0.349033][ T19] alternatives: patching kernel code [ 0.398420][ T1] Registered cp15_barrier emulation handler [ 0.404760][ T1] Registered setend emulation handler [ 0.410503][ T1] KASLR disabled due to lack of seed [ 0.416424][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.427927][ T1] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.436951][ T1] pinctrl core: initialized pinctrl subsystem [ 0.444954][ T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.455122][ T1] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.463869][ T1] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.473401][ T1] audit: initializing netlink subsys (disabled) [ 0.480302][ T72] audit: type=2000 audit(0.316:1): state=initialized audit_enabled=0 res=1 [ 0.480928][ T1] thermal_sys: Registered thermal governor 'step_wise' [ 0.489580][ T1] thermal_sys: Registered thermal governor 'user_space' [ 0.496941][ T1] thermal_sys: Registered thermal governor 'power_allocator' [ 0.505217][ T1] cpuidle: using governor menu [ 0.518659][ T1] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.527109][ T1] ASID allocator initialised with 32768 entries [ 0.533980][ T1] Serial: AMBA PL011 UART driver [ 0.563293][ T1] AW BSP version: 8233bc4b76-dirty, 2023-09-18 11:52:47 +0800 [ 0.571439][ T1] rtc_ccu: sunxi ccu init OK [ 0.588448][ T1] clock: sunxi ccu init OK [ 0.593167][ T1] sun55iw3-cpupll 8817000.clock: Sunxi pll_cpu clk init OK [ 0.605075][ T1] ccu: sunxi ccu init OK [ 0.611146][ T1] r_ccu: sunxi ccu init OK [ 0.618297][ T1] dsp_ccu: sunxi ccu init OK [ 0.627697][ T1] sun55iw3-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver [ 0.682951][ T1] iommu: Default domain type: Translated [ 0.689094][ T1] iommu: DMA domain TLB invalidation policy: strict mode [ 0.697487][ T1] SCSI subsystem initialized [ 0.702558][ T1] usbcore: registered new interface driver usbfs [ 0.709431][ T1] usbcore: registered new interface driver hub [ 0.716061][ T1] usbcore: registered new device driver usb [ 0.722553][ T1] mc: Linux media interface: v0.10 [ 0.728034][ T1] videodev: Linux video capture interface: v2.00 [ 0.734904][ T1] pps_core: LinuxPPS API ver. 1 registered [ 0.741111][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.751914][ T1] PTP clock support registered [ 0.757018][ T1] EDAC MC: Ver: 3.0.0 [ 0.762549][ T1] Advanced Linux Sound Architecture Driver Initialized. [ 0.780321][ T1] sun6i-dma 3002000.dma-controller: sunxi dma probed [ 0.793412][ T1] sun6i-dma 7121000.dma1-controller: sunxi dma probed [ 0.801184][ T1] sunxi iommu: irq = 14 [ 0.809399][ T1] Bluetooth: Core ver 2.22 [ 0.814126][ T1] NET: Registered PF_BLUETOOTH protocol family [ 0.820723][ T1] Bluetooth: HCI device and connection manager initialized [ 0.828466][ T1] Bluetooth: HCI socket layer initialized [ 0.834587][ T1] Bluetooth: L2CAP socket layer initialized [ 0.840906][ T1] Bluetooth: SCO socket layer initialized [ 0.847226][ T1] nfc: nfc_init: NFC Core ver 0.1 [ 0.852627][ T1] NET: Registered PF_NFC protocol family [ 0.859181][ T1] sun55iw3-r-pinctrl 7022000.pinctrl: supply vcc-pl not found, using dummy regulator [ 0.869701][ T1] sunxi-twi 7081400.s_twi0: supply twi not found, using dummy regulator [ 0.879362][ T1] axp20x-i2c 6-0036: Unable to match OF ID [ 0.886983][ T1] pmu-ext-i2c 6-0036: pmu_ext_dev variant AXP1530 found [ 0.894878][ T1] axp1530-dcdc1: supplied by regulator-dummy [ 0.901869][ T1] axp1530-dcdc2: supplied by regulator-dummy [ 0.908709][ T1] axp1530-dcdc3: supplied by regulator-dummy [ 0.915640][ T1] axp1530-aldo1: supplied by regulator-dummy [ 0.922451][ T1] axp1530-dldo1: supplied by regulator-dummy [ 0.929948][ T1] pmu-ext-i2c 6-0036: pmu_ext:AXP1530 driver loaded [ 0.939279][ T1] axp20x-i2c 6-0035: AXP20x variant AXP2202 found [ 0.951772][ T1] axp2202-gpio: Failed to locate of_node [id: 0] [ 0.959003][ T1] axp2202-dcdc1: supplied by regulator-dummy [ 0.969840][ T1] axp2202-dcdc2: supplied by regulator-dummy [ 0.980649][ T1] axp2202-dcdc3: supplied by regulator-dummy [ 0.991625][ T1] axp2202-dcdc4: supplied by regulator-dummy [ 0.998456][ T1] axp2202-aldo1: supplied by regulator-dummy [ 1.005266][ T1] axp2202-aldo2: supplied by regulator-dummy [ 1.011984][ T1] axp2202-aldo3: supplied by regulator-dummy [ 1.022800][ T1] axp2202-aldo4: supplied by regulator-dummy [ 1.033615][ T1] axp2202-bldo1: supplied by regulator-dummy [ 1.044443][ T1] axp2202-bldo2: supplied by regulator-dummy [ 1.055352][ T1] axp2202-bldo3: supplied by regulator-dummy [ 1.062167][ T1] axp2202-bldo4: supplied by regulator-dummy [ 1.069006][ T1] axp2202-cldo1: supplied by regulator-dummy [ 1.075870][ T1] axp2202-cldo2: supplied by regulator-dummy [ 1.082592][ T1] axp2202-cldo3: supplied by regulator-dummy [ 1.093510][ T1] axp2202-cldo4: supplied by regulator-dummy [ 1.100076][ T1] axp2202-rtcldo: supplied by regulator-dummy [ 1.107007][ T1] axp2202-cpusldo: supplied by regulator-dummy [ 1.114177][ T1] axp2202-vmid: supplied by regulator-dummy [ 1.120734][ T1] axp2202-drivevbus: supplied by axp2202-vmid [ 1.131794][ T1] axp20x-i2c 6-0035: AXP20X driver loaded [ 1.138017][ T1] sunxi-twi 7081400.s_twi0: sunxi:twi_sunxi:v2.6.2 probe success [ 1.147321][ T1] sunxi-twi 7081800.s_twi1: sunxi:twi_sunxi:v2.6.2 probe success [ 1.157365][ T1] sunxi_pwm 2000c00.a_pwm: pwmchip probe success [ 1.164947][ T1] clocksource: Switched to clocksource arch_sys_counter [ 1.222558][ T1] VFS: Disk quotas dquot_6.6.0 [ 1.227723][ T1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.248713][ T1] sun55iw3-pinctrl 2000000.pinctrl: initialized sunXi PIO driver [ 1.257761][ T1] NET: Registered PF_INET protocol family [ 1.264094][ T1] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.275497][ T1] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 1.285792][ T1] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.295146][ T1] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 1.305002][ T1] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 1.314208][ T1] TCP: Hash tables configured (established 32768 bind 32768) [ 1.322323][ T1] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 1.330532][ T1] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 1.339384][ T1] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.346416][ T1] NET: Registered PF_XDP protocol family [ 1.352455][ T1] PCI: CLS 0 bytes, default 64 [ 1.357765][ T8] Trying to unpack rootfs image as initramfs... [ 1.366024][ T1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.376377][ T1] kvm [1]: HYP mode not available [ 1.383578][ T1] Initialise system trusted keyrings [ 1.389688][ T1] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.408111][ T1] fuse: init (API version 7.36) [ 1.461992][ T1] Key type asymmetric registered [ 1.467286][ T1] Asymmetric key parser 'x509' registered [ 1.473660][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 238) [ 1.482599][ T1] io scheduler mq-deadline registered [ 1.488360][ T1] io scheduler kyber registered [ 1.493778][ T1] io scheduler bfq registered [ 1.506137][ T1] reg-virt-consumer reg-virt-consumer.0.auto: DMA mask not set [ 1.514643][ T1] reg-virt-consumer reg-virt-consumer.1.auto: DMA mask not set [ 1.523040][ T1] reg-virt-consumer reg-virt-consumer.2.auto: DMA mask not set [ 1.531535][ T1] reg-virt-consumer reg-virt-consumer.3.auto: DMA mask not set [ 1.540105][ T1] reg-virt-consumer reg-virt-consumer.4.auto: DMA mask not set [ 1.548637][ T1] reg-virt-consumer reg-virt-consumer.5.auto: DMA mask not set [ 1.557192][ T1] reg-virt-consumer reg-virt-consumer.6.auto: DMA mask not set [ 1.565616][ T1] reg-virt-consumer reg-virt-consumer.7.auto: DMA mask not set [ 1.574043][ T1] reg-virt-consumer reg-virt-consumer.8.auto: DMA mask not set [ 1.582433][ T1] reg-virt-consumer reg-virt-consumer.9.auto: DMA mask not set [ 1.590943][ T1] reg-virt-consumer reg-virt-consumer.10.auto: DMA mask not set [ 1.599631][ T1] reg-virt-consumer reg-virt-consumer.11.auto: DMA mask not set [ 1.603069][ T8] Freeing initrd memory: 22076K [ 1.608230][ T1] reg-virt-consumer reg-virt-consumer.12.auto: DMA mask not set [ 1.621491][ T1] reg-virt-consumer reg-virt-consumer.13.auto: DMA mask not set [ 1.629933][ T1] reg-virt-consumer reg-virt-consumer.14.auto: DMA mask not set [ 1.638361][ T1] reg-virt-consumer reg-virt-consumer.15.auto: DMA mask not set [ 1.646851][ T1] reg-virt-consumer reg-virt-consumer.16.auto: DMA mask not set [ 1.655302][ T1] reg-virt-consumer reg-virt-consumer.17.auto: DMA mask not set [ 1.663745][ T1] reg-virt-consumer reg-virt-consumer.18.auto: DMA mask not set [ 1.672174][ T1] reg-virt-consumer reg-virt-consumer.19.auto: DMA mask not set [ 1.680659][ T1] reg-virt-consumer reg-virt-consumer.20.auto: DMA mask not set [ 1.689142][ T1] reg-virt-consumer reg-virt-consumer.21.auto: DMA mask not set [ 1.697583][ T1] reg-virt-consumer reg-virt-consumer.22.auto: DMA mask not set [ 1.709790][ T21] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.724968][ T1] brd: module loaded [ 1.744404][ T1] loop: module loaded [ 1.751178][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 1.760563][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. [ 1.772538][ T1] MACsec IEEE 802.1AE [ 1.777384][ T1] tun: Universal TUN/TAP device driver, 1.6 [ 1.783782][ T1] CAN device driver interface [ 1.788764][ T1] PPP generic driver version 2.4.2 [ 1.794302][ T1] PPP BSD Compression module registered [ 1.800238][ T1] PPP Deflate Compression module registered [ 1.806565][ T1] PPP MPPE Compression module registered [ 1.812590][ T1] NET: Registered PF_PPPOX protocol family [ 1.818807][ T1] PPTP driver version 0.8.5 [ 1.823925][ T1] usbcore: registered new interface driver rtl8150 [ 1.830954][ T1] usbcore: registered new interface driver r8152 [ 1.837780][ T1] usbcore: registered new interface driver asix [ 1.844510][ T1] usbcore: registered new interface driver ax88179_178a [ 1.852013][ T1] usbcore: registered new interface driver cdc_ether [ 1.859237][ T1] usbcore: registered new interface driver cdc_eem [ 1.866272][ T1] usbcore: registered new interface driver cdc_ncm [ 1.873287][ T1] usbcore: registered new interface driver aqc111 [ 1.880205][ T1] usbcore: registered new interface driver r8153_ecm [ 1.888494][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.896439][ T1] ehci-pci: EHCI PCI platform driver [ 1.902124][ T1] ehci-platform: EHCI generic platform driver [ 1.909724][ T1] usbcore: registered new interface driver cdc_acm [ 1.916711][ T1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.926533][ T1] usbcore: registered new interface driver uas [ 1.933250][ T1] usbcore: registered new interface driver usb-storage [ 1.940908][ T1] usbcore: registered new interface driver xpad [ 1.947719][ T1] i2c_dev: i2c /dev entries driver [ 1.953408][ T1] usbcore: registered new interface driver uvcvideo [ 1.960493][ T1] gspca_main: v2.14.0 registered [ 1.966248][ T1] device-mapper: uevent: version 1.0.3 [ 1.972336][ T1] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 1.982747][ T1] Bluetooth: HCI UART driver ver 2.3 [ 1.988411][ T1] Bluetooth: HCI UART protocol H4 registered [ 1.994843][ T1] Bluetooth: HCI UART protocol LL registered [ 2.001374][ T1] Bluetooth: HCI UART protocol Broadcom registered [ 2.008378][ T1] Bluetooth: HCI UART protocol QCA registered [ 2.016464][ T1] mmcblk: using 16 minors per device [ 2.022142][ T1] sdhci: Secure Digital Host Controller Interface driver [ 2.029694][ T1] sdhci: Copyright(c) Pierre Ossman [ 2.035241][ T1] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.042596][ T1] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 2.050484][ T1] hid: raw HID events driver (C) Jiri Kosina [ 2.058179][ T1] usbcore: registered new interface driver usbhid [ 2.065072][ T1] usbhid: USB HID core driver [ 2.070347][ T1] ashmem: initialized [ 2.075072][ T1] gnss: GNSS driver registered with major 508 [ 2.082405][ T1] usbcore: registered new interface driver snd-usb-audio [ 2.090472][ T1] dram_clk:1200 [ 2.094133][ T1] dram_div:0x0 [ 2.099022][ T1] sun55iw3-pinctrl 2000000.pinctrl: supply vcc-pc not found, using dummy regulator [ 2.109445][ T1] sunxi-direct-gpio soc@3000000:gpio_leds: sunxi direct gpio probe success [ 2.119231][ T1] no topo process for clk path type:0 [ 2.124981][ T1] no topo process for topo type:0 [ 2.130638][ T1] [DISP]disp_module_init [ 2.135481][ T1] disp 5000000.disp: Adding to iommu group 0 [ 2.143346][ T1] disp_init_bsp_init_para not found boot_disp1 [ 2.149953][ T1] [DISP WRN]: [disp_init_drv_boot_info:2758]: smooth display screen:0 type:1 mode:4 format:0 bits:0 cs:104 eotf:4 [ 2.165244][ T1] [DISP WRN]: [gamma_init:1679]: alloc gamma[0] mm size=0x1100 [ 2.175482][ T1] [DISP WRN]: [gamma_init:1679]: alloc gamma[1] mm size=0x1100 [ 2.186006][ T1] [DISP WRN]: [de_wb_init:0779]: not support more than 1 wb at present [ 2.197010][ T1] de wrn crc 282800 [ 2.201056][ T1] [DISP WRN]: [de_gamma_get_reg_blocks:1741]: priv->reg_blk_num =4 [ 2.211674][ T1] [DISP WRN]: [de_smbl_get_reg_blocks:0224]: priv->reg_blk_num=6 [ 2.222100][ T1] [DISP WRN]: [de_gamma_get_reg_blocks:1754]: blk_num =4 [ 2.231753][ T1] [DISP WRN]: [de_smbl_get_reg_blocks:0238]: get blk_num=6, 0 [ 2.241913][ T1] de wrn crc 2a2800 [ 2.245945][ T1] [DISP WRN]: [de_gamma_get_reg_blocks:1741]: priv->reg_blk_num =4 [ 2.256550][ T1] [DISP WRN]: [de_smbl_get_reg_blocks:0224]: priv->reg_blk_num=6 [ 2.266963][ T1] [DISP WRN]: [de_wb_get_reg_blocks:0872]: not support more than 1 wb at present [ 2.278940][ T1] [DISP WRN]: [de_gamma_get_reg_blocks:1754]: blk_num =4 [ 2.288593][ T1] [DISP WRN]: [de_smbl_get_reg_blocks:0238]: get blk_num=6, 1 [ 2.298721][ T1] [DISP WRN]: [de_wb_get_reg_blocks:0872]: not support more than 1 wb at present [ 2.325336][ T1] disp 5000000.disp: supply cldo4 not found, using dummy regulator [ 2.346579][ T1] [DISP WRN]: [disp_sys_script_get_item:0202]: of_find_compatible_node allwinner,sunxi-disp1 fail [ 2.360439][ T1] [pq_init]+++ [ 2.375698][ T1] [DISP WRN]: [disp_mgr_protect_reg_for_rcq:1048]: NULL hdl! [ 2.385797][ T1] [DISP WRN]: [disp_mgr_protect_reg_for_rcq:1048]: NULL hdl! [ 2.397176][ T56] [DISP WRN]: [de_top_reset_chn2core_mux:0253]: not expected val=ff00ff0, disp=0 [ 2.410722][ T1] [DISP]disp_module_init finish, ret : 0 [ 2.417069][ T56] [DISP WRN]: [de_top_set_de2tcon_mux:0175]: tcon 0 [ 2.417159][ T1] g2d 5440000.g2d: Adding to iommu group 0 [ 2.426360][ T56] [DISP WRN]: [de_smbl_enable_ahb_read:0552]: de_smbl_enable_ahb_read=1 [ 2.432826][ T1] [G2D] mbus clocK get error! [ 2.443544][ T56] [DISP WRN]: [de_dci_enable_ahb_read:0746]: de_dci_enable_ahb_read=1 [ 2.443596][ T56] [DISP WRN]: [lcd_clk_config:0943]: lcd 0, clk: pll(525000000),clk(525000000),dclk(75000000) dsi_rate(525000000) [ 2.443596][ T56] [ 2.448955][ T1] G2D: Module initialized.major:506 [ 2.459406][ T56] [DISP WRN]: [lcd_clk_config:0945]: clk real:pll(522000000),clk(522000000),dclk(74571428) dsi_rate(0) [ 2.477199][ T1] deinterlace 5400000.deinterlace: Adding to iommu group 0 [ 2.504606][ T1] deinterlace 5400000.deinterlace: version[1.0.0], ip=0x300100 [ 2.513019][ T1] sunxi_sid_init()867 - insmod ok [ 2.518649][ T1] axp2202-usb-power-supply axp2202-usb-power-supply.0: DMA mask not set [ 2.530909][ T1] axp2202_usb_power: axp2202-acin device is not configed, not use vbus-det [ 2.530909][ T1] [ 2.551136][ T1] axp2101-pek axp2101-pek.0: DMA mask not set [ 2.563213][ T1] input: axp2202-pek as /devices/platform/soc@3000000/7081400.s_twi0/i2c-6/6-0035/axp2101-pek.0/input/input0 [ 2.576131][ T1] sunxi-msgbox 3003000.msgbox: sunxi_msgbox_probe(): sunxi msgbox start probe [ 2.585942][ T1] sunxi-msgbox 3003000.msgbox: sunxi_msgbox_probe(): sunxi msgbox probe success [ 2.596271][ T1] sunxi-rproc 7010364.dsp0_rproc: sunxi rproc driver 2.2.6 [ 2.604537][ T1] sunxi-rproc 7010364.dsp0_rproc: memstore num: 0 [ 2.611501][ T1] sunxi-rproc 7010364.dsp0_rproc: hifi4 standby init end [ 2.619477][ T1] remoteproc remoteproc0: dsp0_rproc is available [ 2.626463][ T1] sunxi-rproc 7010364.dsp0_rproc: sunxi rproc driver probe ok [ 2.634587][ T1] sunxi-rproc 7130000.e906_rproc: sunxi rproc driver 2.2.6 [ 2.642365][ T1] sunxi-rproc 7130000.e906_rproc: find rproc priv error [ 2.649825][ T1] sunxi-rproc 7130000.e906_rproc: Failed to get resource [ 2.657378][ T1] remoteproc remoteproc1: releasing e906_rproc [ 2.663980][ T1] sunxi-rproc: probe of 7130000.e906_rproc failed with error -22 [ 2.672971][ T1] sunxi-rpbuf-controller rpbuf_controller@0: assigned reserved memory node dsp0_rpbuf@4ae44000 [ 2.684592][ T1] GACT probability NOT on [ 2.689208][ T1] Mirror/redirect action on [ 2.694015][ T1] netem: version 1.3 [ 2.698244][ T1] u32 classifier [ 2.701985][ T1] input device check on [ 2.706770][ T1] Actions configured [ 2.712664][ T1] xt_time: kernel timezone is -0000 [ 2.718365][ T1] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 2.725586][ T1] gre: GRE over IPv4 demultiplexor driver [ 2.731716][ T1] ip_gre: GRE over IPv4 tunneling driver [ 2.738877][ T1] IPv4 over IPsec tunneling driver [ 2.744857][ T1] Initializing XFRM netlink socket [ 2.750344][ T1] IPsec XFRM device driver [ 2.755687][ T1] NET: Registered PF_INET6 protocol family [ 2.764151][ T1] Segment Routing with IPv6 [ 2.768993][ T1] In-situ OAM (IOAM) with IPv6 [ 2.774234][ T1] mip6: Mobile IPv6 [ 2.778949][ T1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.787219][ T1] ip6_gre: GRE over IPv6 tunneling driver [ 2.793833][ T1] NET: Registered PF_PACKET protocol family [ 2.800198][ T1] NET: Registered PF_KEY protocol family [ 2.806351][ T1] can: controller area network core [ 2.812042][ T1] NET: Registered PF_CAN protocol family [ 2.818075][ T1] can: raw protocol [ 2.822126][ T1] can: broadcast manager protocol [ 2.827501][ T1] can: netlink gateway - max_hops=1 [ 2.833368][ T1] Bluetooth: RFCOMM TTY layer initialized [ 2.839526][ T1] Bluetooth: RFCOMM socket layer initialized [ 2.845965][ T1] Bluetooth: RFCOMM ver 1.11 [ 2.850859][ T1] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.858130][ T1] Bluetooth: HIDP socket layer initialized [ 2.864382][ T1] l2tp_core: L2TP core driver, V2.0 [ 2.869941][ T1] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 2.875966][ T1] 8021q: 802.1Q VLAN Support v1.8 [ 2.881343][ T1] tipc: Activated (version 2.0.0) [ 2.886900][ T1] NET: Registered PF_TIPC protocol family [ 2.893163][ T1] tipc: Started in single node mode [ 2.898985][ T1] NET: Registered PF_IEEE802154 protocol family [ 2.905994][ T1] NET: Registered PF_VSOCK protocol family [ 2.913951][ T1] registered taskstats version 1 [ 2.919262][ T1] Loading compiled-in X.509 certificates [ 2.925666][ T99] cryptomgr_probe (99) used greatest stack depth: 15232 bytes left [ 2.928328][ T1] Loaded X.509 cert 'Build time autogenerated kernel key: 6044967aa0897841f2d4a94eeae0e3eb1fd3c229' [ 2.946847][ T1] page_owner is disabled [ 2.951562][ T1] Key type .fscrypt registered [ 2.956644][ T1] Key type fscrypt-provisioning registered [ 2.987384][ T8] sun55iw3-pinctrl 2000000.pinctrl: supply vcc-pb not found, using dummy regulator [ 2.999095][ T8] i2c i2c-0: of_i2c: modalias failure on /soc@3000000/twi0@2502000/ctp@0 [ 3.008195][ T8] i2c i2c-0: Failed to create I2C device for /soc@3000000/twi0@2502000/ctp@0 [ 3.018135][ T8] sunxi-twi 2502000.twi0: sunxi:twi_sunxi:v2.6.2 probe success [ 3.027094][ T8] sunxi-twi 2502800.twi2: sunxi:twi_sunxi:v2.6.2 probe success [ 3.035937][ T8] sunxi-twi 2502c00.twi3: sunxi:twi_sunxi:v2.6.2 probe success [ 3.044703][ T8] sunxi-twi 2503000.twi4: sunxi:twi_sunxi:v2.6.2 probe success [ 3.053933][ T8] sunxi-twi 2503400.twi5: sunxi:twi_sunxi:v2.6.2 probe success [ 3.064159][ T1] hdmi20: [ warn] hdmi_log read sunxi-iova-premap failed! [ 3.071838][ T1] hdmi20: [ info] Get uboot hdmi log failed, malloc a new buffer... [ 3.080484][ T1] hdmi20: [ info] ------- hdmi_log: kernel stage ------ [ 3.087942][ T1] hdmi20: [ info] aw_hdmi_drv_probe: start. [ 3.094306][ T1] hdmi20: [error] _aw_hdmi_dts_parse_pin_config: ddc can not get pinctrl [ 3.103436][ T1] hdmi20: [ info] get hdmi power0: bldo3 is success. [ 3.110859][ T1] hdmi20: [ info] boot hdmi is off [ 3.118506][ T1] hdmi20: [ info] aw_hdmi_drv_probe: finish. [ 3.125274][ T1] hdmi20: [ info] hdmi module init end. [ 3.131294][ T1] hdmi20: [ info] hdmi cec module init end. [ 3.138623][ T1] [DISP WRN]: [disp_sys_pwm_request:0502]: disp_sys_pwm_request pwm 5 fail! -16 [ 3.150529][ T1] [DISP WRN]: [disp_sys_pwm_config:0583]: disp_sys_pwm_Config, handle is NULL! [ 3.162284][ T1] [DISP WRN]: [disp_sys_pwm_set_polarity:0602]: disp_sys_pwm_Set_Polarity, handle is NULL! [ 3.176250][ T1] [VIN_WARN]sensor_helper_probe: cannot get sensor0_cameravdd supply, setting it to NULL! [ 3.186970][ T1] [VIN_WARN]sensor_helper_probe: cannot get sensor0_iovdd supply, setting it to NULL! [ 3.197303][ T1] [VIN_WARN]sensor_helper_probe: cannot get sensor0_avdd supply, setting it to NULL! [ 3.207531][ T1] [VIN_WARN]sensor_helper_probe: cannot get sensor0_dvdd supply, setting it to NULL! [ 3.217842][ T1] [VIN_WARN]sensor_helper_probe: cannot get sensor1_cameravdd supply, setting it to NULL! [ 3.228553][ T1] [VIN_WARN]sensor_helper_probe: cannot get sensor1_iovdd supply, setting it to NULL! [ 3.238880][ T1] [VIN_WARN]sensor_helper_probe: cannot get sensor1_avdd supply, setting it to NULL! [ 3.249110][ T1] [VIN_WARN]sensor_helper_probe: cannot get sensor1_dvdd supply, setting it to NULL! [ 3.261421][ T1] vin_isp 5900000.isp: Adding to iommu group 0 [ 3.268636][ T1] vin_isp 5800800.vind:isp@4: Adding to iommu group 0 [ 3.276202][ T1] vin_isp 5800800.vind:isp@5: Adding to iommu group 0 [ 3.283726][ T1] vin_isp 5800800.vind:isp@6: Adding to iommu group 0 [ 3.294458][ T1] vin_scaler 5910000.scaler: Adding to iommu group 0 [ 3.301954][ T1] vin_scaler 5910400.scaler: Adding to iommu group 0 [ 3.309439][ T1] vin_scaler 5910800.scaler: Adding to iommu group 0 [ 3.316881][ T1] vin_scaler 5910c00.scaler: Adding to iommu group 0 [ 3.324320][ T1] vin_scaler 5800800.vind:scaler@16: Adding to iommu group 0 [ 3.332295][ T1] [VIN_ERR]failed to get vipp16 IRQ resource [ 3.338881][ T1] vin_scaler 5800800.vind:scaler@17: Adding to iommu group 0 [ 3.346857][ T1] [VIN_ERR]failed to get vipp17 IRQ resource [ 3.353699][ T1] sunxi-vin-core 5830000.vinc: Adding to iommu group 0 [ 3.361269][ T1] sunxi-vin-core 5831000.vinc: Adding to iommu group 0 [ 3.368831][ T1] sunxi-vin-core 5832000.vinc: Adding to iommu group 0 [ 3.376394][ T1] sunxi-vin-core 5833000.vinc: Adding to iommu group 0 [ 3.383987][ T1] sunxi-vin-core 5834000.vinc: Adding to iommu group 0 [ 3.391532][ T1] sunxi-vin-core 5835000.vinc: Adding to iommu group 0 [ 3.400885][ T1] [VIN_WARN]get csi mipi clk fail [ 3.406272][ T1] [VIN_WARN]get csi mipi src clk fail [ 3.412757][ T1] [VIN]vinc1 is null [ 3.416884][ T1] [VIN]vinc2 is null [ 3.421002][ T1] [VIN]vinc3 is null [ 3.425366][ T1] [VIN]vinc5 is null [ 3.429492][ T1] [VIN]vinc6 is null [ 3.433609][ T1] [VIN]vinc7 is null [ 3.437962][ T1] [VIN]vinc9 is null [ 3.442088][ T1] [VIN]vinc10 is null [ 3.446301][ T1] [VIN]vinc11 is null [ 3.450743][ T1] [VIN]vinc13 is null [ 3.454956][ T1] [VIN]vinc14 is null [ 3.459169][ T1] [VIN]vinc15 is null [ 3.467451][ T1] genirq: irq_chip sunxi_pio_edge did not update eff. affinity mask of irq 442 [ 3.477180][ T1] car-reverse soc@3000000:car-reverse: sunxi:sunxi_car_reverse:[INFO]: [CAR_INFO]: car reverse module probe ok [ 3.490072][ T1] clk: Not disabling unused clocks [ 3.495551][ T1] ALSA device list: [ 3.499572][ T1] No soundcards found. [ 3.504167][ T1] Warning: unable to open an initial console. [ 3.511114][ T1] Freeing unused kernel memory: 1472K [ 3.533019][ T1] Run /init as init process [ 3.537812][ T1] with arguments: [ 3.541834][ T1] /init [ 3.545090][ T1] with environment: [ 3.549301][ T1] HOME=/ [ 3.552646][ T1] TERM=linux [ 3.556379][ T1] snum=0167572d1080c801cd1 [ 3.561447][ T1] mac_addr= [ 3.565086][ T1] wifi_mac= [ 3.568715][ T1] bt_mac= [ 3.572161][ T1] specialstr= [ 3.575990][ T1] boot_type=2 [ 3.579817][ T1] uboot_message=2018.07-g9b0fc4c-dirty(10/12/2023-18:16:20) [ 3.588062][ T1] disp_reserve=4096000,0xb4756000 [ 3.593801][ T1] buildvariant=userdebug [ 3.602145][ T1] init: init first stage started! [ 3.608336][ T1] init: alias lines in modules.alias must have 3 entries, not 4 [ 3.616841][ T1] init: alias lines in modules.alias must have 3 entries, not 5 [ 3.625142][ T1] init: alias lines in modules.alias must have 3 entries, not 4 [ 3.635271][ T106] init: Loading module /lib/modules/zsmalloc.ko with args '' [ 3.635586][ T107] init: Loading module /lib/modules/timer-sun50i.ko with args '' [ 3.635686][ T108] init: Loading module /lib/modules/tee.ko with args '' [ 3.635952][ T109] init: Loading module /lib/modules/sunxi-vendor-hooks.ko with args '' [ 3.636076][ T110] init: Loading module /lib/modules/sunxi-uart.ko with args '' [ 3.636075][ T109] sunxi_vendor_hooks: module verification failed: signature and/or required key missing - tainting kernel [ 3.636357][ T111] init: Loading module /lib/modules/sunxi_mm.ko with args '' [ 3.699751][ T111] sunxi_mm: Register sunxi direct_swappiness passed. [ 3.700419][ T110] sun55iw3-pinctrl 2000000.pinctrl: unknown pin [ 3.700455][ T113] [ADDR_MGT] addr_mgt_probe: module version: v1.0.11 [ 3.700513][ T113] [ADDR_MGT] addr_mgt_probe: success. [ 3.700580][ T107] sun55iw3-timer 3008000.timer: sun50i timer init:0xffffff00000007 [ 3.700590][ T107] clocksource: timer: mask: 0xffffffffffffff max_cycles: 0x1623fa770, max_idle_ns: 440795202238 ns [ 3.706985][ T111] sunxi_mm: Register sunxi swappiness passed. [ 3.708482][ T106] sun50i_cpufreq_nvmem: dvfs: 0x29, vf2 [ 3.708593][ T108] Saving SoC boot-reason: COLD-BOOT [ 3.708613][ T108] sunxi-rtc 7090000.rtc: errata__fix_alarm_day_reg_default_value(): ALARM0_DAY_REG=0, set it to 1 [ 3.708645][ T108] sunxi-rtc 7090000.rtc: Warning: Using internal RC 16M clock source. Time may be inaccurate! [ 3.708929][ T108] sunxi-rtc 7090000.rtc: Warning: Using internal RC 16M clock source. Time may be inaccurate! [ 3.708996][ T108] sunxi-rtc 7090000.rtc: Warning: Using internal RC 16M clock source. Time may be inaccurate! [ 3.709439][ T108] sunxi-rtc 7090000.rtc: registered as rtc0 [ 3.709455][ T108] sunxi-rtc 7090000.rtc: Warning: Using internal RC 16M clock source. Time may be inaccurate! [ 3.709497][ T108] sunxi-rtc 7090000.rtc: setting system clock to 1970-01-01T00:00:06 UTC (6) [ 3.709527][ T108] sunxi-rtc 7090000.rtc: sunxi rtc probed [ 3.710478][ T108] init (108) used greatest stack depth: 11632 bytes left [ 3.713687][ T110] sun55iw3-pinctrl 2000000.pinctrl: unknown pin [ 3.714995][ T107] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator [ 3.715004][ T107] cpu cpu0: _opp_add: OPP not supported by regulators (408000000) [ 3.715348][ T107] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator [ 3.715355][ T107] cpu cpu0: _opp_add: OPP not supported by regulators (720000000) [ 3.715925][ T107] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator [ 3.715932][ T107] cpu cpu0: _opp_add: OPP not supported by regulators (1128000000) [ 3.716173][ T107] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator [ 3.716180][ T107] cpu cpu0: _opp_add: OPP not supported by regulators (1296000000) [ 3.716753][ T107] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator [ 3.716760][ T107] cpu cpu4: _opp_add: OPP not supported by regulators (408000000) [ 3.717146][ T107] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator [ 3.717153][ T107] cpu cpu4: _opp_add: OPP not supported by regulators (720000000) [ 3.717615][ T107] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator [ 3.717622][ T107] cpu cpu4: _opp_add: OPP not supported by regulators (1248000000) [ 3.720359][ T107] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1296000 KHz, changing to: 1320000 KHz [ 3.720750][ T107] cpu cpu0: EM: created perf domain [ 3.721353][ T106] BOOTEVENT: 3721.351860: ON [ 3.723337][ T107] cpu cpu4: EM: created perf domain [ 3.725692][ T107] init (107) used greatest stack depth: 10256 bytes left [ 3.726503][ T110] uart 2500000.uart: there is not valid maps for state default [ 3.745635][ T109] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.746231][ T110] sun55iw3-pinctrl 2000000.pinctrl: unknown pin [ 3.753284][ T109] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.758270][ T110] sun55iw3-pinctrl 2000000.pinctrl: unknown pin [ 3.763856][ T104] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 3.776692][ T110] uart 2500000.uart: there is not valid maps for state sleep [ 3.785840][ T104] cfg80211: failed to load regulatory.db [ 4.081382][ T110] uart uart0: uart0 error to get fifo size property [ 4.088333][ T110] uart0: ttyAS0 at MMIO 0x2500000 (irq = 106, base_baud = 1500000) is a SUNXI [ 4.097676][ T110] sw_console_setup()1863 - console setup baud 115200 parity n bits 8, flow n [ 4.106971][ T110] printk: console [ttyAS0] enabled [ 4.106971][ T110] printk: console [ttyAS0] enabled [ 4.117836][ T110] printk: bootconsole [uart8250] disabled [ 4.117836][ T110] printk: bootconsole [uart8250] disabled [ 4.130738][ T110] uart uart1: supply uart not found, using dummy regulator [ 4.138777][ T110] uart1: ttyAS1 at MMIO 0x2500400 (irq = 107, base_baud = 1500000) is a SUNXI [ 4.149048][ T110] uart uart6: supply uart not found, using dummy regulator [ 4.157083][ T110] uart6: ttyAS6 at MMIO 0x2501800 (irq = 108, base_baud = 1500000) is a SUNXI [ 4.170193][ T120] dsu dvfs: vf2 [ 4.174271][ T120] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator [ 4.174828][ T121] optee: probing for conduit method. [ 4.175272][ T118] zram: Added device: zram0 [ 4.175585][ T119] sunxi-mmc 4022000.sdmmc: SD/MMC/SDIO Host Controller Driver(v5.36 2023-8-2 14:31) [ 4.175907][ T119] sunxi-mmc 4022000.sdmmc: ctl-spec-caps 308 [ 4.176183][ T119] sunxi-mmc 4022000.sdmmc: No vdmmc regulator found [ 4.176189][ T119] sunxi-mmc 4022000.sdmmc: No vd33sw regulator found [ 4.176192][ T119] sunxi-mmc 4022000.sdmmc: No vd18sw regulator found [ 4.176195][ T119] sunxi-mmc 4022000.sdmmc: No vq33sw regulator found [ 4.176198][ T119] sunxi-mmc 4022000.sdmmc: No vq18sw regulator found [ 4.176211][ T119] sunxi-mmc 4022000.sdmmc: Cann't get uart0 pinstate,check if needed [ 4.176214][ T119] sunxi-mmc 4022000.sdmmc: Cann't get pin bias hs pinstate,check if needed [ 4.176708][ T119] sunxi-mmc 4022000.sdmmc: ***ctl-cmdq-md*** 20 [ 4.185232][ T120] sunxi-dsufreq 8815000.dsufreq: _opp_add: OPP not supported by regulators (288000000) [ 4.190823][ T121] optee: revision 3.7 (3d360a47) [ 4.191169][ T119] sunxi-mmc 4022000.sdmmc: cq_host:ffffff80c7809080, mmc:ffffff80c7658000, host:ffffff80c76587c0 [ 4.191182][ T119] mmc0: CQHCI version 0.00 [ 4.191311][ T119] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 23 width 1 timing LEGACY(SDR12) dt B [ 4.195880][ T120] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator [ 4.203890][ T119] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B [ 4.206198][ T121] optee: initialized driver [ 4.212575][ T120] sunxi-dsufreq 8815000.dsufreq: _opp_add: OPP not supported by regulators (528000000) [ 4.216507][ T119] sunxi-mmc 4022000.sdmmc: detmode:alway in(non removable) [ 4.216522][ T71] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B [ 4.217500][ T119] sunxi-mmc 4020000.sdmmc: SD/MMC/SDIO Host Controller Driver(v5.36 2023-8-2 14:31) [ 4.217729][ T119] sunxi-mmc 4020000.sdmmc: ctl-spec-caps 408 [ 4.218078][ T119] sunxi-mmc 4020000.sdmmc: No vqmmc regulator found [ 4.218082][ T119] sunxi-mmc 4020000.sdmmc: No vdmmc regulator found [ 4.218519][ T119] sunxi-mmc 4020000.sdmmc: Got CD GPIO [ 4.218559][ T119] sunxi-mmc 4020000.sdmmc: cd-set-debounce is 0x1 [ 4.219504][ T71] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B [ 4.220837][ T71] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm OD pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B [ 4.227295][ T119] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 23 width 1 timing LEGACY(SDR12) dt B [ 4.227678][ T120] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator [ 4.227684][ T120] sunxi-dsufreq 8815000.dsufreq: _opp_add: OPP not supported by regulators (1008000000) [ 4.227854][ T120] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator [ 4.227859][ T120] sunxi-dsufreq 8815000.dsufreq: _opp_add: OPP not supported by regulators (1104000000) [ 4.227963][ T120] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator [ 4.227968][ T120] sunxi-dsufreq 8815000.dsufreq: _opp_add: OPP not supported by regulators (1128000000) [ 4.273903][ T71] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm OD pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B [ 4.274103][ T119] sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator [ 4.284750][ T71] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm OD pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B [ 4.300956][ T119] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B [ 4.304651][ T71] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm OD pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B [ 4.317352][ T119] sunxi-mmc 4020000.sdmmc: detmode:gpio irq [ 4.347017][ T71] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B [ 4.357320][ T119] sunxi-mmc 4021000.sdmmc: SD/MMC/SDIO Host Controller Driver(v5.36 2023-8-2 14:31) [ 4.377373][ T71] sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01) [ 4.387511][ T119] sunxi-mmc 4021000.sdmmc: ctl-spec-caps 408 [ 4.393796][ T71] sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01) [ 4.401038][ T119] sunxi-mmc 4021000.sdmmc: No vmmc regulator found [ 4.408186][ T71] sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01) [ 4.414103][ T119] sunxi-mmc 4021000.sdmmc: No vqmmc regulator found [ 4.421116][ T71] sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01) [ 4.426257][ T71] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 8 timing LEGACY(SDR12) dt B [ 4.433446][ T119] sunxi-mmc 4021000.sdmmc: No vdmmc regulator found [ 4.433450][ T119] sunxi-mmc 4021000.sdmmc: No vd33sw regulator found [ 4.433453][ T119] sunxi-mmc 4021000.sdmmc: No vd18sw regulator found [ 4.448057][ T71] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS200 dt B [ 4.457641][ T119] sunxi-mmc 4021000.sdmmc: No vq33sw regulator found [ 4.457644][ T119] sunxi-mmc 4021000.sdmmc: No vq18sw regulator found [ 4.457647][ T119] sunxi-mmc 4021000.sdmmc: manual set ocr [ 4.468415][ T71] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 52000000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS200 dt B [ 4.479017][ T119] sunxi-mmc 4021000.sdmmc: Cann't get uart0 pinstate,check if needed [ 4.489903][ T71] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 150000000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS200 dt B [ 4.500378][ T119] sunxi-mmc 4021000.sdmmc: Cann't get pin bias hs pinstate,check if needed [ 4.521037][ T117] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B [ 4.522078][ T119] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B [ 4.526422][ T71] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 150000000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS(SDR20) dt B [ 4.526491][ T71] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 52000000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS(SDR20) dt B [ 4.526945][ T71] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS400 dt B [ 4.527018][ T71] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 150000000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS400 dt B [ 4.854883][ T71] mmc0: Command Queue Engine enabled [ 4.860653][ T71] mmc0: new HS400 MMC card at address 0001 [ 4.867257][ T119] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 4.867692][ T71] mmcblk0: mmc0:0001 A3A561 57.6 GiB [ 4.892204][ T71] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 [ 4.892318][ T119] sunxi-mmc 4021000.sdmmc: detmode:manually by software [ 4.907123][ T71] mmcblk0rpmb: mmc0:0001 A3A561 16.0 MiB, chardev (234:0) [ 4.913997][ C0] sunxi-mmc 4021000.sdmmc: smc 2 p1 err, cmd 52, RTO !! [ 4.929433][ C0] sunxi-mmc 4021000.sdmmc: smc 2 p1 err, cmd 52, RTO !! [ 4.937039][ T56] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 4.952377][ T56] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 4.966904][ C0] sunxi-mmc 4021000.sdmmc: smc 2 p1 err, cmd 5, RTO !! [ 4.975218][ C0] sunxi-mmc 4021000.sdmmc: smc 2 p1 err, cmd 5, RTO !! [ 4.983570][ C0] sunxi-mmc 4021000.sdmmc: smc 2 p1 err, cmd 5, RTO !! [ 4.991932][ C0] sunxi-mmc 4021000.sdmmc: smc 2 p1 err, cmd 5, RTO !! [ 4.999478][ T56] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B [ 5.000482][ T1] EXT4-fs (mmcblk0p21): Ignoring removed nomblk_io_submit option [ 5.024593][ T1] EXT4-fs (mmcblk0p21): recovery complete [ 5.030955][ T1] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit. Quota mode: none. [ 5.048699][ T138] random: e2fsck: uninitialized urandom read (40 bytes read) [ 5.057987][ T1] e2fsck: linker: Warning: failed to find generated linker configuration from "/linkerconfig/ld.config.txt" [ 5.063375][ T138] random: e2fsck: uninitialized urandom read (40 bytes read) [ 5.070685][ T1] e2fsck: WARNING: linker: Warning: failed to find generated linker configuration from "/linkerconfig/ld.config.txt" [ 5.092287][ T1] e2fsck: e2fsck 1.46.2 (28-Feb-2021) [ 5.098128][ T1] e2fsck: Pass 1: Checking inodes, blocks, and sizes [ 5.105416][ T1] e2fsck: Pass 2: Checking directory structure [ 5.112140][ T1] e2fsck: Pass 3: Checking directory connectivity [ 5.119151][ T1] e2fsck: Pass 4: Checking reference counts [ 5.125573][ T1] e2fsck: Pass 5: Checking group summary information [ 5.132871][ T1] e2fsck: /dev/block/by-name/metadata: 31/4096 files (0.0% non-contiguous), 1568/4096 blocks [ 5.151014][ T1] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: errors=panic. Quota mode: none. [ 5.166026][ T1] random: init: uninitialized urandom read (16 bytes read) [ 5.179953][ T1] erofs: (device dm-0): mounted with root inode @ nid 65. [ 5.191876][ T1] EXT4-fs (dm-4): mounted filesystem without journal. Opts: . Quota mode: none. [ 5.202969][ T1] erofs: (device dm-1): mounted with root inode @ nid 42. [ 5.211993][ T1] erofs: (device dm-3): mounted with root inode @ nid 39. [ 5.220680][ T1] erofs: (device dm-2): mounted with root inode @ nid 39. [ 5.229722][ T1] EXT4-fs (mmcblk0p22): Ignoring removed nomblk_io_submit option [ 5.241594][ T1] EXT4-fs (mmcblk0p22): recovery complete [ 5.247958][ T1] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit. Quota mode: none. [ 5.266927][ T1] e2fsck: executing /system/bin/e2fsck failed: No such file or directory [ 5.278195][ T1] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: errors=panic. Quota mode: none. [ 5.297800][ T1] SELinux: Unable to set superblock options before the security server is initialized [ 5.314616][ T1] FAT-fs (mmcblk0p27): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 5.368257][ T1] printk: init: 5 output lines suppressed due to ratelimiting [ 5.376546][ T1] printk: init: 90 output lines suppressed due to ratelimiting [ 5.500663][ T1] init: DM_DEV_STATUS failed for system_ext_a: No such device or address [ 5.509983][ T1] init: Could not update logical partition [ 5.516411][ T1] init: Opening SELinux policy [ 5.522999][ T1] init: Falling back to standard signature check. TODO implementent support for fsverity SEPolicy. [ 5.534886][ T1] init: Error: Apex SEPolicy failed signature check [ 5.542182][ T1] init: Loading APEX Sepolicy from /system/etc/selinux/apex/SEPolicy.zip [ 5.551530][ T1] init: Failed to open package /system/etc/selinux/apex/SEPolicy.zip: No such file or directory [ 5.569149][ T1] init: Loading SELinux policy [ 5.595554][ T1] SELinux: Permission bpf in class capability2 not defined in policy. [ 5.604632][ T1] SELinux: Permission checkpoint_restore in class capability2 not defined in policy. [ 5.615124][ T1] SELinux: Permission bpf in class cap2_userns not defined in policy. [ 5.624161][ T1] SELinux: Permission checkpoint_restore in class cap2_userns not defined in policy. [ 5.634768][ T1] SELinux: Class mctp_socket not defined in policy. [ 5.642076][ T1] SELinux: the above unknown classes and permissions will be denied [ 5.656372][ T1] SELinux: policy capability network_peer_controls=1 [ 5.663805][ T1] SELinux: policy capability open_perms=1 [ 5.670131][ T1] SELinux: policy capability extended_socket_class=1 [ 5.677523][ T1] SELinux: policy capability always_check_network=0 [ 5.684809][ T1] SELinux: policy capability cgroup_seclabel=0 [ 5.691622][ T1] SELinux: policy capability nnp_nosuid_transition=1 [ 5.699010][ T1] SELinux: policy capability genfs_seclabel_symlinks=0 [ 5.706589][ T1] SELinux: policy capability ioctl_skip_cloexec=0 [ 5.897196][ T72] audit: type=1403 audit(8.684:2): auid=4294967295 ses=4294967295 lsm=selinux res=1 [ 5.907219][ T1] selinux: SELinux: Loaded file_contexts [ 5.913685][ T1] selinux: [ 5.946950][ T1] init: init second stage started! [ 6.011423][ T1] init: Using Android DT directory /proc/device-tree/firmware/android/ [ 6.027008][ T1] init: Couldn't load property file '/vendor/default.prop': open() failed: No such file or directory: No such file or directory [ 6.047074][ T1] init: Couldn't load property file '/odm_dlkm/etc/build.prop': open() failed: No such file or directory: No such file or directory [ 6.063744][ T1] init: Couldn't load property file '/oem/build.prop': open() failed: No such file or directory: No such file or directory [ 6.078517][ T1] init: Could not set 'ro.boot.dynamic_partitions' to 'true' while loading .prop filesRead-only property was already set [ 6.092479][ T1] init: Could not set 'ro.boot.dynamic_partitions_retrofit' to 'true' while loading .prop filesRead-only property was already set [ 6.108761][ T1] init: Setting product property ro.product.brand to 'Allwinner' (from ro.product.product.brand) [ 6.120397][ T1] init: Setting product property ro.product.device to 't527-demo-car' (from ro.product.product.device) [ 6.132605][ T1] init: Setting product property ro.product.manufacturer to 'Allwinner' (from ro.product.product.manufacturer) [ 6.186215][ T158] random: init: uninitialized urandom read (40 bytes read) [ 6.215237][ T158] random: init: uninitialized urandom read (40 bytes read) [ 6.328774][ T159] random: linkerconfig: uninitialized urandom read (40 bytes read) [ 6.343504][ T159] linkerconfig: Unable to access VNDK APEX at path: /apex/com.android.vndk.v33: No such file or directory [ 6.356236][ T159] linkerconfig: Unable to access VNDK APEX at path: /apex/com.android.vndk.v33: No such file or directory [ 6.403071][ T160] ueventd: ueventd started! [ 6.411749][ T160] selinux: SELinux: Loaded file_contexts [ 6.418660][ T160] selinux: [ 6.422840][ T160] ueventd: Parsing file /system/etc/ueventd.rc... [ 6.430082][ T160] ueventd: Added '/vendor/etc/ueventd.rc' to import list [ 6.437856][ T160] ueventd: Added '/odm/etc/ueventd.rc' to import list [ 6.445322][ T161] apexd: Bootstrap subcommand detected [ 6.446134][ T160] ueventd: Parsing file /vendor/etc/ueventd.rc... [ 6.451371][ T161] apexd: ActivateFlattenedApex [ 6.458760][ T160] ueventd: Parsing file /odm/etc/ueventd.rc... [ 6.463519][ T161] apexd: Scanning /system/apex [ 6.470253][ T160] ueventd: Unable to read config file '/odm/etc/ueventd.rc': open() failed: No such file or directory [ 6.475949][ T161] apexd: Bind mounting /system/apex/com.android.adbd onto /apex/com.android.adbd [ 6.498261][ T161] apexd: Bind mounting /system/apex/com.android.adservices onto /apex/com.android.adservices [ 6.510146][ T161] apexd: Bind mounting /system/apex/com.android.appsearch onto /apex/com.android.appsearch [ 6.521923][ T161] apexd: Bind mounting /system/apex/com.android.art onto /apex/com.android.art [ 6.532480][ T161] apexd: Bind mounting /system/apex/com.android.btservices onto /apex/com.android.btservices [ 6.544387][ T161] apexd: Bind mounting /system/apex/com.android.conscrypt onto /apex/com.android.conscrypt [ 6.555990][ T161] apexd: Bind mounting /system/apex/com.android.extservices onto /apex/com.android.extservices [ 6.588101][ T161] printk: apexd: 24 output lines suppressed due to ratelimiting [ 6.925992][ T175] prng_seeder: Hanging forever because setup failed: hwrng.read_exact in new [ 6.925992][ T175] [ 6.938205][ T175] Caused by: [ 6.941676][ T175] No such device (os error 19) [ 6.957766][ T158] sunxi-rfkill soc@3000000:rfkill: module version: v1.1.4 [ 6.965632][ T158] sunxi-rfkill soc@3000000:rfkill: pinctrl_lookup_state(default) failed! return ffffffffffffffed [ 6.977360][ T158] sunxi-rfkill soc@3000000:rfkill: get gpio chip_en failed [ 6.985280][ T158] sunxi-rfkill soc@3000000:rfkill: get gpio power_en failed [ 6.993431][ T158] sunxi-rfkill soc@3000000:rfkill: wlan_busnum (1) [ 7.000808][ T158] sunxi-rfkill soc@3000000:rfkill: wlan power[0] (axp2202-dcdc4) voltage: 3300mV [ 7.011024][ T158] sunxi-rfkill soc@3000000:rfkill: wlan power[1] (axp2202-bldo1) voltage: 1800mV [ 7.021134][ T158] sunxi-rfkill soc@3000000:rfkill: wlan_regon gpio=385 assert=1 [ 7.027869][ T160] ueventd: Coldboot took 0.539 seconds [ 7.029588][ T158] sun55iw3-r-pinctrl 7022000.pinctrl: supply vcc-pm not found, using dummy regulator [ 7.046408][ T158] sunxi-rfkill soc@3000000:rfkill: wlan_hostwake gpio=384 assert=1 [ 7.055131][ T158] sunxi-rfkill soc@3000000:rfkill: wakeup source is enabled [ 7.063127][ T158] sunxi-rfkill soc@3000000:rfkill: wlan power boot-on: 0, always-on: 0 [ 7.072357][ T158] sunxi-rfkill soc@3000000:rfkill: bt power[0] (axp2202-dcdc4) voltage: 3300mV [ 7.082262][ T158] sunxi-rfkill soc@3000000:rfkill: bt power[1] (axp2202-bldo1) voltage: 1800mV [ 7.092151][ T158] sunxi-rfkill soc@3000000:rfkill: bt_rst gpio=386 assert=0 [ 7.100181][ T158] sunxi-rfkill soc@3000000:rfkill: bluetooth power boot-on: 0, always-on: 0 [ 7.198269][ T1] Registered swp emulation handler [ 7.226519][ T179] random: logd: uninitialized urandom read (40 bytes read) [ 7.233635][ T180] random: lmkd: uninitialized urandom read (40 bytes read) [ 7.238556][ T181] random: servicemanager: uninitialized urandom read (40 bytes read) [ 7.283445][ T179] logd.auditd: start console:/ $ [ 7.287867][ T179] logd.klogd: 7122888961 [ 7.294755][ T158] inno-combphy 4f00000.phy: Sub System Version: 0x10000 [ 7.308597][ T179] logd: Loaded bug_map file: /system_ext/etc/selinux/bug_map [ 7.317016][ T179] logd: Loaded bug_map file: /vendor/etc/selinux/selinux_denial_metadata [ 7.327023][ T179] logd: Loaded bug_map file: /system/etc/selinux/bug_map [ 7.333333][ T189] treadahead: /treadahead/readahead_file_offset not exist; [ 7.342844][ T189] treadahead: go to open trace [ 7.470130][ T197] type=1400 audit(10.256:3): avc: denied { getattr } for comm="init" path="/sys/kernel/debug/devices_deferred" dev="debugfs" ino=17452 scontext=u:r:init:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=1 [ 7.493407][ T197] type=1400 audit(10.256:4): avc: denied { getattr } for comm="init" path="/sys/kernel/debug/wakeup_sources" dev="debugfs" ino=2051 scontext=u:r:init:s0 tcontext=u:object_r:debugfs_wakeup_sources:s0 tclass=file permissive=1 [ 7.627159][ T211] vdc: Waited 0ms for vold [ 7.633643][ T207] AW_keymint_2 : starting aw keymint service [ 7.634293][ T207] AW_keymint_2 : message_version:4 [ 7.646608][ T207] AW_keymint_2 : load ta: [ 7.646648][ T207] AW_keymint_2 : 0a 82 10 d5 27 9c 83 49 ad 73 f8 b3 01 0a cd 04 [ 7.666248][ T212] vdc: Waited 0ms for vold [ 8.737450][ T195] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?) [ 9.755559][ T195] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?) [ 10.773566][ T195] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?) [ 11.791566][ T195] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?) [ 12.713261][ T225] random: crash_dump64: uninitialized urandom read (40 bytes read) [ 12.809475][ T195] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?) [ 12.813176][ T190] logd: logdr: UID=1017 GID=1017 PID=226 n tail=0 logMask=8 pid=205 start=0ns deadline=0ns [ 12.838644][ T190] logd: logdr: UID=1017 GID=1017 PID=226 n tail=0 logMask=1 pid=205 start=0ns deadline=0ns [ 12.850432][ T226] DEBUG: *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** [ 12.850534][ T226] DEBUG: Build fingerprint: 'Allwinner/t527_demo_car_arm64/t527-demo-car:13/TQ2A.230405.003.B2/eng.lizhi.20230927.185912:userdebug/test-keys' [ 12.859931][ T226] DEBUG: Revision: '0' [ 12.876032][ T226] DEBUG: ABI: 'arm64' [ 12.880533][ T226] DEBUG: Timestamp: 1970-01-01 08:00:15.539019545+0800 [ 12.884957][ T226] DEBUG: Process uptime: 6s [ 12.892584][ T226] DEBUG: Cmdline: /system/bin/keystore2 /data/misc/keystore [ 12.897585][ T226] DEBUG: pid: 205, tid: 205, name: binder:205_2 >>> /system/bin/keystore2 <<< [ 12.905699][ T226] DEBUG: uid: 1017 [ 12.915641][ T226] DEBUG: tagged_addr_ctrl: 0000000000000001 (PR_TAGGED_ADDR_ENABLE) [ 12.919712][ T226] DEBUG: signal 6 (SIGABRT), code -1 (SI_QUEUE), fault addr -------- [ 12.928598][ T226] DEBUG: Abort message: 'Failed to create service android.system.keystore2.IKeystoreService/default because of In KeystoreService::new_native_binder: Trying to construct mandatory security level TEE. [ 12.959109][ T226] DEBUG: [ 12.962248][ T226] DEBUG: Caused by: [ 12.966371][ T226] DEBUG: 0: In KeystoreSecurityLevel::new_native_binder. [ 12.974471][ T226] DEBUG: 1: In get_keymint_device. [ 12.980423][ T226] DEBUG: 2: In connect_keymint: Trying to connect to genuine KeyMint service. [ 12.990575][ T226] DEBUG: 3: Binder transaction error NAME_NOT_FOUND.' [ 12.990661][ T226] DEBUG: x0 0000000000000000 x1 00000000000000cd x2 0000000000000006 x3 0000007fd40a9380 [ 12.998544][ T226] DEBUG: x4 0000000000808080 x5 0000000000808080 x6 0000000000808080 x7 8080808080808080 [ 13.010527][ T226] DEBUG: x8 00000000000000f0 x9 000000797f109a70 x10 0000000000000001 x11 000000797f17ae2c [ 13.022508][ T226] DEBUG: x12 0101010101010101 x13 72657320746e694d x14 0000000000000001 x15 0000000000000030 [ 13.034475][ T226] DEBUG: x16 000000797f1e2a40 x17 000000797f1bccb0 x18 0000007987166000 x19 00000000000000cd [ 13.046462][ T226] DEBUG: x20 00000000000000cd x21 00000000ffffffff x22 00000057957c6080 x23 0000000000000000 [ 13.058439][ T226] DEBUG: x24 0000000000000001 x25 00000057957da750 x26 00000057957da7a8 x27 0000007fd40a9690 [ 13.070413][ T226] DEBUG: x28 00000057957d5c10 x29 0000007fd40a9400 [ 13.082448][ T226] DEBUG: lr 000000797f16c9e8 sp 0000007fd40a9360 pc 000000797f16ca14 pst 0000000000001000 [ 13.090146][ T226] DEBUG: backtrace: [ 13.102129][ T226] DEBUG: #00 pc 000000000008aa14 /apex/com.android.runtime/lib64/bionic/libc.so (abort+164) (BuildId: 86827b27b123a9879220ea6b489eecf5) [ 13.106294][ T226] DEBUG: #01 pc 00000000001576ac /system/bin/keystore2 (_RNvNvCs2yrrfPAoZZX_11panic_abort18___rust_start_panic5abort.llvm.16868985108068327187+4) (BuildId: fb0dc1a83c1d0a0dcc1bc19bb94ad839) [ 13.122458][ T226] DEBUG: #02 pc 00000000001576a0 /system/bin/keystore2 (__rust_start_panic+8) (BuildId: fb0dc1a83c1d0a0dcc1bc19bb94ad839) [ 13.143874][ T226] DEBUG: #03 pc 0000000000165c5c /system/bin/keystore2 (rust_panic+16) (BuildId: fb0dc1a83c1d0a0dcc1bc19bb94ad839) [ 13.158680][ T226] DEBUG: #04 pc 000000000016592c /system/bin/keystore2 (_RNvNtCs4p8YLn7dL5m_3std9panicking20rust_panic_with_hook+996) (BuildId: fb0dc1a83c1d0a0dcc1bc19bb94ad839) [ 13.172797][ T226] DEBUG: #05 pc 0000000000165498 /system/bin/keystore2 (_RNCNvNtCs4p8YLn7dL5m_3std9panicking19begin_panic_handler0B5_.llvm.8848384190362852836+112) (BuildId: fb0dc1a83c1d0a0dcc1bc19bb94ad839) [ 13.191519][ T226] DEBUG: #06 pc 0000000000163d90 /system/bin/keystore2 (_RINvNtNtCs4p8YLn7dL5m_3std10sys_common9backtrace26___rust_end_short_backtraceNCNvNtB6_9panicking19begin_panic_handler0zEB6_.llvm.8848384190362852836+16) (BuildId: fb0dc1a83c1d0a0dcc1bc19bb94ad839) [ 13.213116][ T226] DEBUG: #07 pc 000000000016526c /system/bin/keystore2 (rust_begin_unwind+36) (BuildId: fb0dc1a83c1d0a0dcc1bc19bb94ad839) [ 13.240796][ T226] DEBUG: #08 pc 0000000000077388 /system/bin/keystore2 (_RNvNtCsl9ljXaK2GKD_4core9panicking9panic_fmt+36) (BuildId: fb0dc1a83c1d0a0dcc1bc19bb94ad839) [ 13.255591][ T226] DEBUG: #09 pc 00000000000465dc /system/bin/keystore2 (_RNvCsdV139EorvfX_14keystore2_main4main+4872) (BuildId: fb0dc1a83c1d0a0dcc1bc19bb94ad839) [ 13.273147][ T226] DEBUG: #10 pc 00000000000469bc /system/bin/keystore2 (_RNCINvNtCs4p8YLn7dL5m_3std2rt10lang_startuE0CsdV139EorvfX_14keystore2_main+8) (BuildId: fb0dc1a83c1d0a0dcc1bc19bb94ad839) [ 13.290281][ T226] DEBUG: #11 pc 0000000000163788 /system/bin/keystore2 (_RNvNtCs4p8YLn7dL5m_3std2rt19lang_start_internal+344) (BuildId: fb0dc1a83c1d0a0dcc1bc19bb94ad839) [ 13.310620][ T226] DEBUG: #12 pc 0000000000046ac0 /system/bin/keystore2 (main+40) (BuildId: fb0dc1a83c1d0a0dcc1bc19bb94ad839) [ 13.328526][ T226] DEBUG: #13 pc 0000000000083290 /apex/com.android.runtime/lib64/bionic/libc.so (__libc_init+96) (BuildId: 86827b27b123a9879220ea6b489eecf5) [ 13.827612][ T195] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?) [ 14.862341][ T195] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?) [ 15.880254][ T195] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?) [ 16.898159][ T195] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?) [ 17.916119][ T195] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?) [ 18.934170][ T195] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?) [ 19.952109][ T195] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?) [ 20.970094][ T195] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?) [ 21.988158][ T195] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?) [ 23.006073][ T195] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?) [ 23.682814][ T117] axp2202_usb_power: current limit not set: usb adapter type [ 23.682814][ T117] [ 24.023980][ T195] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?) [ 24.209086][ T71] pdtest 0.pd-ve-test: runtime_suspend disable clock [ 24.216440][ T71] pdtest 0.pd-vi-test: runtime_suspend disable clock [ 24.223776][ T71] pdtest 0.pd-vo0-test: runtime_suspend disable clock [ 24.231193][ T71] pdtest 0.pd-vo1-test: runtime_suspend disable clock [ 24.238609][ T71] pdtest 0.pd-de-test: runtime_suspend disable clock [ 24.245924][ T71] pdtest 0.pd-nand-test: runtime_suspend disable clock [ 24.253449][ T71] pdtest 0.pd-pcie-test: runtime_suspend disable clock [ 24.260961][ T71] pdtest 0.pd-dsp-test: runtime_suspend disable clock [ 24.268380][ T71] pdtest 0.pd-npu-test: runtime_suspend disable clock [ 24.275803][ T71] pdtest 0.pd-sram-test: runtime_suspend disable clock [ 24.283320][ T71] pdtest 0.pd-riscv-test: runtime_suspend disable clock [ 25.042027][ T195] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?) [ 26.060084][ T195] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?) [ 27.078015][ T195] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?) [ 28.096119][ T195] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?) [ 29.114068][ T195] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?) [ 30.131985][ T195] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?) [ 31.149934][ T195] ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?)后面的log基本都是
ServiceManager: Waited one second for android.system.keystore2.IKeystoreService/default (is service started? are binder threads started and available?)这个服务报错的错误log为
[ 12.928598][ T226] DEBUG: Abort message: 'Failed to create service android.system.keystore2.IKeystoreService/default because of In KeystoreService::new_native_binder: Trying to construct mandatory security level TEE. [ 12.959109][ T226] DEBUG: [ 12.962248][ T226] DEBUG: Caused by: [ 12.966371][ T226] DEBUG: 0: In KeystoreSecurityLevel::new_native_binder. [ 12.974471][ T226] DEBUG: 1: In get_keymint_device. [ 12.980423][ T226] DEBUG: 2: In connect_keymint: Trying to connect to genuine KeyMint service. [ 12.990575][ T226] DEBUG: 3: Binder transaction error NAME_NOT_FOUND.'但是keymint服务似乎已经启动?
[ 7.633643][ T207] AW_keymint_2 : starting aw keymint service [ 7.634293][ T207] AW_keymint_2 : message_version:4 [ 7.646608][ T207] AW_keymint_2 : load ta: [ 7.646648][ T207] AW_keymint_2 : 0a 82 10 d5 27 9c 83 49 ad 73 f8 b3 01 0a cd 04辛苦大家帮我看看
-
Android13编译不过发布在 编译和烧写问题专区
编译安卓13编译报错，我没什么头绪，麻烦大家帮忙看看怎么想办法解决
registry_table has NOT been set. Please check it.
