R329 SPI Nand 分区问题

[roidmi]

系统启动到这一步就停了，看上去像是分区出问题了？求解决思路。

[    2.481794] UBI error: cannot open mtd sys, error -2
[    2.487198] UBI: block: can't open volume on ubi0_-1, err=-19get usb_detect_mode is fail, 22
[    2.497659] sunxi-rtc rtc: setting system clock to 1970-01-01 12:58:03 UTC (46683)
[    2.507102] ALSA device list:
[    2.510437]   No soundcards found.
[    2.514590] VFS: Cannot open root device "ubiblock0_5" or unknown-block(0,0): error -6
[    2.523469] Please append a correct "root=" boot option; here are the available partitions:
[    2.532847] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[    2.542114] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.191 #21
[    2.548941] Hardware name: sun50iw11 (DT)
[    2.553427] Call trace:
[    2.556175] [<ffffff8008087938>] dump_backtrace+0x0/0x204
[    2.562231] [<ffffff8008087b50>] show_stack+0x14/0x1c
[    2.567894] [<ffffff80082928ec>] dump_stack+0x88/0xb0
[    2.573552] [<ffffff8008110bc8>] panic+0x120/0x358
[    2.578921] [<ffffff80087d1210>] mount_block_root+0x268/0x330
[    2.585358] [<ffffff80087d1348>] mount_root+0x70/0x80
[    2.591013] [<ffffff80087d14bc>] prepare_namespace+0x164/0x174
[    2.597547] [<ffffff80087d0dd0>] kernel_init_freeable+0x150/0x18c
[    2.604374] [<ffffff800861e5d0>] kernel_init+0x10/0xf8
[    2.610137] [<ffffff8008083180>] ret_from_fork+0x10/0x50
[    2.616086] SMP: stopping secondary CPUs
[    2.620515] Kernel Offset: disabled
[    2.624433] Memory Limit: none
[    2.627859] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)

[whycan]

@roidmi
贴出全部日志

[roidmi]

@whycan c756d259-ea4a-4b94-b923-d6cf26435a46-error.log

帮忙看下 谢谢

[YuzukiTsuru]

[    0.795463] sunxi-spinand: AW SPINand MTD Layer Version: 2.0 20201228
[    0.802712] sunxi-spinand-phy: AW SPINand Phy Layer Version: 1.11 20211125
[    0.810597] sunxi-spinand-phy: not detect any munufacture from id table
[    0.818054] sunxi-spinand-phy: get spi-nand Model from fdt fail
[    0.824704] sunxi-spinand-phy: get phy info from fdt fail
[    0.830762] sunxi-spinand-phy: not detect munufacture from fdt
[    0.837414] sunxi-spinand-phy: detect munufacture from id table: GD
[    0.844453] sunxi-spinand-phy: get spi-nand Model from fdt fail
[    0.851095] sunxi-spinand-phy: get phy info from fdt fail
[    0.857156] sunxi-spinand-phy: not detect munufacture from fdt
[    0.863700] sunxi-spinand-phy: not match spinand: 52c852c8 52c852c8

在ID表里没有这个NAND的料号，not match spinand: 52c852c8 52c852c8

参考：一个补丁，让D1-H的SDK支持T113芯片 https://bbs.aw-ol.com/topic/2027/share/18

[roidmi]

@yuzukitsuru

id.c里面是有这个料的，id是c852, log日志里是52c8 52c8 懵了 求指点