请问哪吒 D1 开发板拔插 HDMI 显示器, 提示sink do not support this mode 是什么问题? 换了两台显示器了.

[tigger]

[  117.150633] HDMI cable is connected
[  118.050843] error: invalid cea_vic code:0
[  118.055448] [HDMI2 error]: sink do not support this mode:0

请问哪吒 D1 开发板拔插 HDMI 显示器, 提示sink do not support this mode 是什么问题? 换了两台显示器了.

[caozilong]

@tigger
哈，有点像是EDID读取到的VID 不支持，每个VID应该对应一种制式，这里可能有两种情况
要么HDMI线的I2C通道异常，读取不到正确的EDID，要么是运气太差，用的两台显示器默认制式不包含在支持列表之内。

[tigger]

@caozilong 在 请问哪吒 D1 开发板拔插 HDMI 显示器, 提示sink do not support this mode 是什么问题? 换了两台显示器了. 中说：

@tigger
哈，有点像是EDID读取到的VID 不支持，每个VID应该对应一种制式，这里可能有两种情况
要么HDMI线的I2C通道异常，读取不到正确的EDID，要么是运气太差，用的两台显示器默认制式不包含在支持列表之内。

这就尴尬了，一度以为不支持hdmi输出。

这样的话回去我再换两台hdmi设备试一试。

[xiaowenge]

@tigger 你的是不是4K显示器？

[tigger]

@xiaowenge 在 请问哪吒 D1 开发板拔插 HDMI 显示器, 提示sink do not support this mode 是什么问题? 换了两台显示器了. 中说：

@tigger 你的是不是4K显示器？

不是，两个都是最大支持 1920*1080。

[anruliu]

@tigger /sys/devices/virtual/hdmi/hdmi/attr是hdmi的调试节点，可以在这里看下hdmi_sink节点，正常会有类似输出

root@TinaLinux:~# cat /sys/class/hdmi/hdmi/attr/hdmi_sink


Video Mode:  640x480P  720x480P  720x480P  1080I60  480I  480I  1080P60  576P  576P  720P50  1080I50  576I  576I  1080P50  720P60

Only Support YUV420:

Also Support YUV420:

Pixel Format: RGB  YUV444  YUV422

Deep Color:

Basic Audio Support:  YES

Audio Code:  LPCM

HDCP Tpye:

[xiaowenge]

@tigger 默认应该是MIPI输出，切到HDMI输出就好了：

cd /sys/kernel/debug/dispdbg
echo disp0 > name; echo switch1 > command; echo 4 10 0 0 0x4 0x101 0 0 0 8 > param; echo 1 > start;

[nideyida]

@anruliu 请问要如何修改源代码，才能让固件的默认显示是从HDMI输出呢？
现在的最新版本的源代码，应该是MIPI输出。我把dts里的screen0_output_type改成了3，我看到注释里写就3是HDMI。但是开机的时候哪吒的logo还是没有从HDMI输出，我想起这个开机LOGO可能是在uboot里就显示的，所以我把configs/nezha/uboot-board.dts文件里的screen0_output_type配置也改了，并重新编译了uboot替换到bin下，但还是不生效。

另外就是我知道了这个logo是放在device/config/chips/d1/configs/nezha/configs下的，我有没有办法在不修改图片片源的情况下，把logo拉到自动适应满hdmi屏幕呢？

[tigger]

搞定,谢谢大佬:

[tigger]

@tigger 在 请问哪吒 D1 开发板拔插 HDMI 显示器, 提示sink do not support this mode 是什么问题? 换了两台显示器了. 中说：

搞定,谢谢大佬:

怎么设置hdmi分辨率呢？还是自动检测的？

[xiaowenge]

@tigger

echo 4 10 0 0 0x4 0x101 0 0 0 8 > param;

这里第二个参数是分辨率，按照.dts注释里写的：

0screenx_output_mode   (used for hdmi output, 
0:480i 
1:576i 
2:480p 
3:576p 
4:720p50
5:720p60 
6:1080i50 
7:1080i60 
8:1080p24 
9:1080p50 
10:1080p60
)

[nideyida]

证明一下我重新编译并替换了uboot

yida@AwExdroid89:~/workspace/d_tina_d1_open_v1.0$ cbin
yida@AwExdroid89:~/workspace/d_tina_d1_open_v1.0/device/config/chips/d1/bin$ ll
total 1432
drwxrwxr-x 2 yida yida   4096 May 28 11:04 ./
drwxrwxr-x 7 yida yida   4096 Apr 30 19:42 ../
-rw-rw-r-- 1 yida yida  65536 Jul 14 16:01 boot0_nand_sun20iw1p1.bin
-rw-rw-r-- 1 yida yida  65536 Jul 14 16:01 boot0_sdcard_sun20iw1p1.bin
-rw-rw-r-- 1 yida yida  49152 Jul 14 16:01 boot0_spinor_sun20iw1p1.bin
-rwxrwxr-x 1 yida yida 263580 Apr 30 19:42 dsp0.bin*
-rw-rw-r-- 1 yida yida  42336 Jul 14 16:01 fes1_sun20iw1p1.bin
-rwxrwxr-x 1 yida yida  62008 May 28 11:04 opensbi_sun20iw1p1.bin*
-rw-rw-r-- 1 yida yida 898563 Aug  3 11:40 u-boot-sun20iw1p1.bin
yida@AwExdroid89:~/workspace/d_tina_d1_open_v1.0/device/config/chips/d1/bin$ ckernel
yida@AwExdroid89:~/workspace/d_tina_d1_open_v1.0/lichee/linux-5.4$ muboot
d1_nezha d1 d1-nezha
build_boot platform:sun20iw1p1 o_option:uboot
Prepare toolchain ...
build for sun20iw1p1_defconfig ...
  CHK     include/config/uboot.release
  CHK     include/generated/timestamp_autogenerated.h
  CHK     include/config.h
  CFG     u-boot.cfg
  CHK     include/generated/version_autogenerated.h
  CHK     include/generated/generic-asm-offsets.h
  CHK     include/generated/asm-offsets.h
  OBJCOPY u-boot.srec
  OBJCOPY u-boot-nodtb.bin
‘/home/yida/workspace/d_tina_d1_open_v1.0/device/config/chips/d1/configs/nezha/uboot-board.dts’ -> ‘/home/yida/workspace/d_tina_d1_open_v1.0/lichee/brandy-2.0/u-boot-2018/arch/riscv/dts/.board-uboot.dts’
  SYM     u-boot.sym
  DTC     arch/riscv/dts/sun20iw1p1-soc-system.dtb
  SHIPPED dts/dt.dtb
  FDTGREP dts/dt-spl.dtb
./scripts/dtc/dtc -W no-unit_address_vs_reg -W no-unit_address_format -W no-simple_bus_reg -W no-pwms_property -I dtb -O dts  /home/yida/workspace/d_tina_d1_open_v1.0/lichee/brandy-2.0/u-boot-2018/arch/riscv/dts/"sun20iw1p1-soc-system".dtb > u-boot-dtb.dts
  CAT     u-boot-dtb.bin
  COPY    u-boot.dtb
  COPY    u-boot.bin
‘u-boot.bin’ -> ‘u-boot-sun20iw1p1.bin’
‘u-boot-sun20iw1p1.bin’ -> ‘./../../../device/config/chips/d1/bin/u-boot-sun20iw1p1.bin’
  CFGCHK  u-boot.cfg
muboot success!
yida@AwExdroid89:~/workspace/d_tina_d1_open_v1.0/lichee/linux-5.4$ cbin
yida@AwExdroid89:~/workspace/d_tina_d1_open_v1.0/device/config/chips/d1/bin$ ll
total 1432
drwxrwxr-x 2 yida yida   4096 May 28 11:04 ./
drwxrwxr-x 7 yida yida   4096 Apr 30 19:42 ../
-rw-rw-r-- 1 yida yida  65536 Jul 14 16:01 boot0_nand_sun20iw1p1.bin
-rw-rw-r-- 1 yida yida  65536 Jul 14 16:01 boot0_sdcard_sun20iw1p1.bin
-rw-rw-r-- 1 yida yida  49152 Jul 14 16:01 boot0_spinor_sun20iw1p1.bin
-rwxrwxr-x 1 yida yida 263580 Apr 30 19:42 dsp0.bin*
-rw-rw-r-- 1 yida yida  42336 Jul 14 16:01 fes1_sun20iw1p1.bin
-rwxrwxr-x 1 yida yida  62008 May 28 11:04 opensbi_sun20iw1p1.bin*
-rw-rw-r-- 1 yida yida 898563 Aug  3 14:17 u-boot-sun20iw1p1.bin
yida@AwExdroid89:~/workspace/d_tina_d1_open_v1.0/device/config/chips/d1/bin$ croot
yida@AwExdroid89:~/workspace/d_tina_d1_open_v1.0$ pack
--==========--
PACK_CHIP         sun20iw1p1
PACK_PLATFORM     tina
PACK_BOARD        d1-nezha
PACK_KERN
PACK_DEBUG        uart0
PACK_SIG          none
PACK_SECURE       none
PACK_MODE         normal
PACK_FUNC         android
PACK_PROGRAMMER   none
PACK_TAR_IMAGE    none
PACK_TOPDIR       /home/yida/workspace/d_tina_d1_open_v1.0
--==========--
No kernel param, parse it from d1
copying tools file
copying configs file
storage_type value is 5
rm /home/yida/workspace/d_tina_d1_open_v1.0/out/d1-nezha/image/sys_partition_nor.fex
rm /home/yida/workspace/d_tina_d1_open_v1.0/out/d1-nezha/image/image_nor.cfg
copying boot resource

LZMA 4.65 : Igor Pavlov : Public domain : 2009-02-03
copying boot file
make user resource for : /home/yida/workspace/d_tina_d1_open_v1.0/out/d1-nezha/image/sys_partition.fex
handle partition user-res
no user resource partitions
APP_PART_DOWNLOAD_FILE = /home/yida/workspace/d_tina_d1_open_v1.0/out/d1-nezha/image/app.fex
Need size of filesystem
no data resource partitions
don't build dtbo ...
update_chip
pack boot package
GetPrivateProfileSection read to end
content_count=3
LICHEE_REDUNDANT_ENV_SIZE config in BoardConfig.mk
--mkenvimage create redundant env data!--
---redundant env data size 0x20000---
packing for tina linux
normal
this is not a partition key
gpt_head->header_crc32 = 0x5277aea2
GPT----part num 8---
gpt_entry: 128
gpt_header: 92
GPT:boot-resource: 1f8           2177
GPT:env         : 2178          236f
GPT:env-redund  : 2370          2567
GPT:boot        : 2568          761f
GPT:rootfs      : 7620          11597
GPT:dsp0        : 11598         11987
GPT:recovery    : 11988         187c7
GPT:UDISK       : 187c8         187d7
update gpt file ok
update mbr file ok
====================================
show "sys_partition_for_dragon.fex" message
------------------------------------
  [mbr]
  mbr_size  : 252 Kbyte
------------------------------------
  partition_name  : boot-resource
  partition_size  : 8064
  downloadfile  : boot-resource.fex
  boot-resource.fex size : 3.0M byte
------------------------------------
  partition_name  : env
  partition_size  : 504
  downloadfile  : env.fex
  env.fex size : 128K byte
------------------------------------
  partition_name  : env-redund
  partition_size  : 504
  downloadfile  : env.fex
  env.fex size : 128K byte
------------------------------------
  partition_name  : boot
  partition_size  : 20664
  downloadfile  : boot.fex
  boot.fex -> /home/yida/workspace/d_tina_d1_open_v1.0/out/d1-nezha/boot.img
  boot.img size : 9.1M byte
------------------------------------
  partition_name  : rootfs
  partition_size  : 40824
  downloadfile  : rootfs.fex
  rootfs.fex -> /home/yida/workspace/d_tina_d1_open_v1.0/out/d1-nezha/rootfs.img
  rootfs.img size : 16M byte
------------------------------------
  partition_name  : dsp0
  partition_size  : 1008
  downloadfile  : dsp0.fex
  dsp0.fex size : 258K byte
------------------------------------
  partition_name  : recovery
  partition_size  : 28224
------------------------------------
/home/yida/workspace/d_tina_d1_open_v1.0/out/host/bin/
/home/yida/workspace/d_tina_d1_open_v1.0/out/d1-nezha/image
Begin Parse sys_partion.fex
Add partion boot-resource.fex BOOT-RESOURCE_FEX
Add partion very boot-resource.fex BOOT-RESOURCE_FEX
FilePath: boot-resource.fex
FileLength=2f8c00Add partion env.fex ENV_FEX000000000
Add partion very env.fex ENV_FEX000000000
FilePath: env.fex
FileLength=20000Add partion env.fex ENV_FEX000000000
Add partion very env.fex ENV_FEX000000000
FilePath: env.fex
FileLength=20000Add partion boot.fex BOOT_FEX00000000
Add partion very boot.fex BOOT_FEX00000000
FilePath: boot.fex
FileLength=912000Add partion rootfs.fex ROOTFS_FEX000000
Add partion very rootfs.fex ROOTFS_FEX000000
FilePath: rootfs.fex
FileLength=fa0000Add partion dsp0.fex DSP0_FEX00000000
Add partion very dsp0.fex DSP0_FEX00000000
FilePath: dsp0.fex
FileLength=4059csys_config.fex Len: 0x4ebe
config.fex Len: 0x6c00
board.fex Len: 0x400
split_xxxx.fex Len: 0x200
sys_partition.fex Len: 0xbe3
sunxi.fex Len: 0xd400
boot0_nand.fex Len: 0x10000
boot0_sdcard.fex Len: 0x10000
u-boot.fex Len: 0xdc000
u-boot-crash.fex Len: 0x25
toc1.fex Len: 0x8
toc0.fex Len: 0x8
fes1.fex Len: 0xa560
boot_package.fex Len: 0xfc000
usbtool.fex Len: 0x24e00
usbtool_crash.fex Len: 0x1ec00
aultools.fex Len: 0x28a73
aultls32.fex Len: 0x25205
cardtool.fex Len: 0x11e00
cardscript.fex Len: 0x6de
sunxi_gpt.fex Len: 0x2000
sunxi_mbr.fex Len: 0x10000
dlinfo.fex Len: 0x4000
arisc.fex Len: 0xf
vmlinux.fex Len: 0x8
tinaconf.fex Len: 0xcd05
boot-resource.fex Len: 0x2f8c00
Vboot-resource.fex Len: 0x4
env.fex Len: 0x20000
Venv.fex Len: 0x4
env.fex Len: 0x20000
Venv.fex Len: 0x4
boot.fex Len: 0x912000
Vboot.fex Len: 0x4
rootfs.fex Len: 0xfa0000
Vrootfs.fex Len: 0x4
dsp0.fex Len: 0x4059c
Vdsp0.fex Len: 0x4
BuildImg 0
Dragon execute image.cfg SUCCESS !
----------image is for nand/emmc----------
----------image is at----------

/home/yida/workspace/d_tina_d1_open_v1.0/out/d1-nezha/tina_d1-nezha_uart0.img

[nideyida]

为了不影响楼主的时间线，重开一贴提问：
D1哪吒开发板默认输出改成HDMI

[fengf]

@tigger 请问你是怎么解决这个问题的，我也碰到同样的问题啦sink do not support this mode，能参考一下你的dts吗？

[tigger]

@fengf

后来改成启动默认就是HDMI：

【固件发布】D1哪吒HDMI测试固件20210804（开机HDMI就有小企鹅启动logo）
https://bbs.aw-ol.com/topic/297/share/2