D1H emmc启动问题

lgkgkfg LV 6

U-Boot 2018.05-g24521d6-dirty (Oct 11 2022 - 05:48:04 +0000) Allwinner Technology

[00.300]DRAM:  1 GiB
[00.302]Relocation Offset is: 3dee7000
[00.306]secure enable bit: 0
[00.309]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz  MBus=300Mhz
[00.315]flash init start
[00.317]workmode = 0,storage type = 2
[00.321][mmc]: mmc driver ver uboot2018:2021-11-19 15:38:00
[00.326][mmc]: get sdc_type fail and use default host:tm4.
[00.332][mmc]: SUNXI SDMMC Controller Version:0x50310
[00.357][mmc]: Best spd md: 2-HSDDR52/DDR50, freq: 2-50000000, Bus width: 4
[00.364]sunxi flash init ok
[00.366]line:703 init_clocks
[00.370]drv_disp_init
request pwm success, pwm2:pwm2:0x2000c00.
[00.387]drv_disp_init finish
[00.389]boot_gui_init:start
[00.392]set disp.dev2_output_type fail. using defval=0
[00.419]boot_gui_init:finish
partno erro : can't find partition bootloader
54 bytes read in 0 ms
[00.595]bmp_name=bootlogo.bmp size 3072054
[00.652]LCD open finish
3072054 bytes read in 67 ms (43.7 MiB/s)
[00.690]Loading Environment from SUNXI_FLASH... OK
[00.705]out of usb burn from boot: not need burn key
[00.710][mmc]: memalign dst_align is NULL!
read first backup failed in fun sunxi_flash_mmc_secread line 358
[00.719][mmc]: memalign dst_align is NULL!
read first backup failed in fun sunxi_flash_mmc_secread line 358
[00.729]unknown error happen in item 0 read
[00.732]get secure storage map err
partno erro : can't find partition private
root_partition is rootfs
set root to /dev/mmcblk0p5
[00.745]update part info
[00.747]update bootcmd
[00.751]change working_fdt 0x7eaa6da0 to 0x7ea86da0
[00.756][mmc]: no mmc-hs400-1_8v!
[00.759][mmc]: delete mmc-hs200-1_8v from dtb
[00.763][mmc]: get max-frequency ok 50000000 Hz
disable nand error: FDT_ERR_BADPATH
No reserved memory region found in source FDT
[00.792]update dts
noncached_alloc(): addr = 0x7eefb080
noncached_alloc(): addr = 0x7eefb0c0
noncached_alloc(): addr = 0x7eefb100
noncached_alloc(): addr = 0x7eefb94

日志如下，请问可能是啥问题？

柚木鉉 LV 9

看着已经启动了，是不是kernel没有配置串口或者配置的串口不对

lgkgkfg LV 6

@yuzukitsuru 确实是没配置串口，我改硬件了，只有BOOT0那里修改了，内核设备树那里没改，