F133 启动

[ZM12138]

F133启动失败，改过uboot底下的sdmmc.c里面sunxi_sprite_mmc_probe，

#ifndef CONFIG_MACH_SUN50IW11
	return sdmmc_init_for_sprite(0, 2);
#else

无法启动进入内核

Platform Name          : T-HEAD Xuantie Platform
Platform HART Features : RV64ACDFIMSUVX
Platform Max HARTs     : 1
Current Hart           : 0
Firmware Base          : 0x41fc0400
Firmware Size          : 75 KB
Runtime SBI Version    : 0.2

MIDELEG : 0x0000000000000222
MEDELEG : 0x000000000000b1ff
PMP0    : 0x0000000041fc0000-0_H2018.05 (Jan 28 2023 - 13:59:06 +0800) Allwinner Technology

[00.289]DRAM:  64 MiB
[00.291]Relocation Offset is: 01f1b000
[00.295]secure enable bit: 0
[00.298]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz  MBus=300Mhz
[00.304]sunxi flash type@1 not support fast burn key
[00.308]flash init start
[00.311]workmode = 17,storage type = 1
try card 0
set card number 0
get card number 0
[00.318][mmc]: mmc driver ver uboot2018:2021-12-20 13:35:00
[00.324][mmc]: get sdc_type fail and use default host:tm1.
FDT ERROR:fdt_get_all_pin:get property handle pinctrl-0 error:FDT_ERR_INTERNAL
[00.336][mmc]: get card0 default pin fail
[00.340][mmc]: can't find node "mmc0",will add new node
[00.345][mmc]: fdt err returned <no error>
[00.349][mmc]: Using default timing para
[00.352][mmc]: sunxi mmc pin set failed!
[00.356]error card no error
[00.358][mmc]: MMC Device -1 not found
fail to find one useful mmc card2
try emmc fail
[00.369]unrecognized JEDEC id bytes: ff, ff, ff
try spinor fail
initcall sequence 0000000043fa2de0 failed at call 000000004200ca86 (err=-1)
### ERROR ### Please RESET the board ###

如何才能排除错误

[whycan]

@zm12138
① 为什么要改
② 改之前正常吗?

[ZM12138]

@whycan 改之前是从#ifndef CONFIG_MACH_SUN50IW11
return sdmmc_init_for_sprite(0, 2);，报错，显示没有找到CARD2，我用的是mq芒果派，SD卡是CARD0
#else
改之后是#ifndef CONFIG_MACH_SUN50IW11
return sdmmc_init_for_sprite(0, 0);，报错好像是DTS的错误，但是不知道改哪里

[whycan]

@zm12138
① 为什么要改呢?

[mangogeek]

@zm12138 刷卡别选量产卡

[ZM12138]

@mangogeek
好的，学习了

[ZM12138]

@whycan 大概是刷卡的原因

[ZM12138]

@mangogeek 还是报错了

[YuzukiTsuru]

需要线刷SD卡吗？