全志在线开发者论坛

vuiot

T113-S3 lvds0 有人遇到这个问题吗 colorbar 8 测试的时候周围一圈黑的其他的模式显示也都不正常

vuiot

@whycanservice2 可以单独使用lvds1么

vuiot

@hubbell 看设备树我的屏没有 reset

vuiot

@whycan 我看之前论坛有回复 A133 可以这样用 T113-S3不行的 datasheet 上这两个地方看起来差不多

vuiot

@whycan 可以单独用lvds1吗还是说只能两个lvds lvds1才能用

vuiot

T113-S3 支持 MIPI + LVDS 双屏吗？自己做了个板子 MIPI调好了 LVDS 没有一点反应，有没有相关资料呀 ! 原理图中的效果能实现吗
屏幕截图 2023-11-14 203133.jpg 屏幕截图 2023-11-14 203422.jpg


		lcd1: lcd1@1 {
			compatible = "allwinner,sunxi-lcd1";
			reg = <0x0 0x1c0c000 0x0 0x0>;  /* Fake registers to avoid dtc compiling warnings */
			pinctrl-names = "active","sleep";
			status = "okay";
		};


&lcd0 {
	lcd_used            = <1>;
	lcd_driver_name     = "tft08006";

	lcd_if              = <4>;
	lcd_dsi_if          = <0>;

	lcd_x               = <1200>;
    lcd_y               = <1920>;
    lcd_width           = <135>;
    lcd_height          = <216>;
    lcd_dclk_freq       = <156>;

    lcd_hbp             = <35>;
    lcd_ht              = <1280>;
    lcd_hspw            = <5>; 
    lcd_vbp             = <8>;
    lcd_vt              = <1936>; 
    lcd_vspw            = <2>;
	
	lcd_backlight       = <150>;
	lcd_pwm_used        = <1>;
	lcd_pwm_ch          = <7>;
	lcd_pwm_freq        = <50000>;
	lcd_pwm_pol         = <1>;
	lcd_pwm_max_limit   = <255>;

	lcd_bright_curve_en = <0>;
    
    lcd_dsi_lane        = <4>;
	lcd_dsi_format       = <0>;
	lcd_dsi_te       = <0>;

    lcd_frm             = <0>;
    lcd_gamma_en        = <0>;
    lcd_cmap_en         = <0>;

	pinctrl-0 = <&dsi4lane_pins_a>;
	pinctrl-1 = <&dsi4lane_pins_b>;
};

&lcd1 {
	lcd_used            = <1>;
	lcd_driver_name     = "default_lcd";

	lcd_if              = <3>;
	lcd_lvds_if          = <0>;

	lcd_x               = <800>;
    lcd_y               = <1280>;
    lcd_width           = <135>;
    lcd_height          = <216>;
    lcd_dclk_freq       = <156>;

    lcd_hbp             = <24>;
    lcd_ht              = <920>;
    lcd_hspw            = <24>; 
    lcd_vbp             = <10>;
    lcd_vt              = <1304>; 
    lcd_vspw            = <2>;
	
	lcd_backlight       = <150>;
	lcd_pwm_used        = <1>;
	lcd_pwm_ch          = <5>;
	lcd_pwm_freq        = <50000>;
	lcd_pwm_pol         = <1>;
	lcd_pwm_max_limit   = <255>;

	lcd_bright_curve_en = <0>;

	lcd_lvds_colordepth = <1>;
	lcd_lvds_mode       = <0>;

    lcd_frm             = <1>;
	// 	lcd_io_phase        = <0x0000>;
	// lcd_hv_clk_phase	= <0>;
	// lcd_hv_sync_polarity = <0>;
    lcd_gamma_en        = <0>;
    lcd_cmap_en         = <0>;

	pinctrl-0 = <&lvds1_pins_a>;
	pinctrl-1 = <&lvds1_pins_b>;

	lcd_bl_en = <&pio PD 20 GPIO_ACTIVE_HIGH>;
};

vuiot

@vuiot ```
root@TinaLinux:/# hciattach -n ttyS1 xradio >/dev/null 2>&1 &
root@TinaLinux:/# [ 876.001969] sunxi-rfkill soc@3000000:rfkill@0: set block: 1
[ 876.010266] sunxi-rfkill soc@3000000:rfkill@0: bt power off success
[ 876.219424] sunxi-rfkill soc@3000000:rfkill@0: set block: 0
[ 876.237541] sunxi-rfkill soc@3000000:rfkill@0: bt power on success
[ 876.266506] [XR_BT_LPM] bluedroid_write_proc_btwake: bluedroid_write_proc_btwake 1
[ 876.276980] [XR_BT_LPM] bluedroid_write_proc_btwake: wakeup bt device
[ 876.286204] [XR_BT_LPM] bluedroid_write_proc_lpm: disable lpm mode
[ 876.636867] sunxi-rfkill soc@3000000:rfkill@0: set block: 1
[ 876.645156] sunxi-rfkill soc@3000000:rfkill@0: bt power off success
[ 877.154422] sunxi-rfkill soc@3000000:rfkill@0: set block: 0
[ 877.172751] sunxi-rfkill soc@3000000:rfkill@0: bt power on success
[ 878.003494] sunxi-rfkill soc@3000000:rfkill@0: set block: 1
[ 878.011777] sunxi-rfkill soc@3000000:rfkill@0: bt power off success
[ 878.521068] sunxi-rfkill soc@3000000:rfkill@0: set block: 0
[ 878.539393] sunxi-rfkill soc@3000000:rfkill@0: bt power on success
[ 879.370139] sunxi-rfkill soc@3000000:rfkill@0: set block: 1
[ 879.378418] sunxi-rfkill soc@3000000:rfkill@0: bt power off success
[ 879.887702] sunxi-rfkill soc@3000000:rfkill@0: set block: 0
[ 879.905976] sunxi-rfkill soc@3000000:rfkill@0: bt power on success
[ 880.736725] sunxi-rfkill soc@3000000:rfkill@0: set block: 1
[ 880.745057] sunxi-rfkill soc@3000000:rfkill@0: bt power off success
[ 881.254315] sunxi-rfkill soc@3000000:rfkill@0: set block: 0
[ 881.272603] sunxi-rfkill soc@3000000:rfkill@0: bt power on success
[ 882.103338] sunxi-rfkill soc@3000000:rfkill@0: set block: 1
[ 882.111623] sunxi-rfkill soc@3000000:rfkill@0: bt power off success
[ 882.620906] sunxi-rfkill soc@3000000:rfkill@0: set block: 0
[ 882.639187] sunxi-rfkill soc@3000000:rfkill@0: bt power on success
[ 883.469925] sunxi-rfkill soc@3000000:rfkill@0: set block: 1
[ 883.478259] sunxi-rfkill soc@3000000:rfkill@0: bt power off success
[ 883.987537] sunxi-rfkill soc@3000000:rfkill@0: set block: 0
[ 884.005815] sunxi-rfkill soc@3000000:rfkill@0: bt power on success
[ 884.836587] sunxi-rfkill soc@3000000:rfkill@0: set block: 1
[ 884.844874] sunxi-rfkill soc@3000000:rfkill@0: bt power off success
[ 885.354152] sunxi-rfkill soc@3000000:rfkill@0: set block: 0
[ 885.372380] sunxi-rfkill soc@3000000:rfkill@0: bt power on success

[1]+ Done(1) hciattach -n ttyS1 xradio 1>/dev/null 2>&1
root@TinaLinux:/# ls /sys/class/bluetooth/
root@TinaLinux:/#
root@TinaLinux:/#


找不到 hci0

vuiot

root@TinaLinux:/# bt_test
root@TinaLinux:/# 1654041608.165236: BTMG[bt_manager_set_enable_default:519]:  enable default profile from bt config.
1654041608.165372: BTMG[bt_manager_enable:410]:  bt manager version:Version:3.0.1.202204081438,builed time:Apr  8 2022-08:44:03
1654041608.165412: BTMG[bt_test_status_cb:82]:  bt is turnning on.
[   13.727333] sunxi-rfkill soc@3000000:rfkill@0: block state already is 1
[   13.939900] sunxi-rfkill soc@3000000:rfkill@0: set block: 0
[   13.960772] sunxi-rfkill soc@3000000:rfkill@0: bt power on success
[   13.992488] [XR_BT_LPM] bluedroid_write_proc_btwake: bluedroid_write_proc_btwake 1
[   14.005497] [XR_BT_LPM] bluedroid_write_proc_btwake: wakeup bt device
[   14.017162] [XR_BT_LPM] bluedroid_write_proc_lpm: disable lpm mode
[   14.370433] sunxi-rfkill soc@3000000:rfkill@0: set block: 1
[   14.380895] sunxi-rfkill soc@3000000:rfkill@0: bt power off success
[   14.892246] sunxi-rfkill soc@3000000:rfkill@0: set block: 0
[   14.912423] sunxi-rfkill soc@3000000:rfkill@0: bt power on success
[   15.745118] sunxi-rfkill soc@3000000:rfkill@0: set block: 1
[   15.755031] sunxi-rfkill soc@3000000:rfkill@0: bt power off success
[   16.265825] sunxi-rfkill soc@3000000:rfkill@0: set block: 0
[   16.285457] sunxi-rfkill soc@3000000:rfkill@0: bt power on success
[   17.117570] sunxi-rfkill soc@3000000:rfkill@0: set block: 1
[   17.126994] sunxi-rfkill soc@3000000:rfkill@0: bt power off success
[   17.637414] sunxi-rfkill soc@3000000:rfkill@0: set block: 0
[   17.656768] sunxi-rfkill soc@3000000:rfkill@0: bt power on success
[   18.488614] sunxi-rfkill soc@3000000:rfkill@0: set block: 1
[   18.497846] sunxi-rfkill soc@3000000:rfkill@0: bt power off success
[   19.008112] sunxi-rfkill soc@3000000:rfkill@0: set block: 0
[   19.027236] sunxi-rfkill soc@3000000:rfkill@0: bt power on success
[   19.858885] sunxi-rfkill soc@3000000:rfkill@0: set block: 1
[   19.867894] sunxi-rfkill soc@3000000:rfkill@0: bt power off success
[   20.377844] sunxi-rfkill soc@3000000:rfkill@0: set block: 0
[   20.396708] sunxi-rfkill soc@3000000:rfkill@0: bt power on success
bring up hci0 failed
1654041615.413116: BTMG[btmg_device_on:56]:  detect hci0......
[   21.228039] sunxi-rfkill soc@3000000:rfkill@0: set block: 1
[   21.236660] sunxi-rfkill soc@3000000:rfkill@0: bt power off success
[   21.746200] sunxi-rfkill soc@3000000:rfkill@0: set block: 0
[   21.764573] sunxi-rfkill soc@3000000:rfkill@0: bt power on success
[   22.595349] sunxi-rfkill soc@3000000:rfkill@0: set block: 1
[   22.603611] sunxi-rfkill soc@3000000:rfkill@0: bt power off success
[   23.112905] sunxi-rfkill soc@3000000:rfkill@0: set block: 0
[   23.131088] sunxi-rfkill soc@3000000:rfkill@0: bt power on success
1654041618.413359: BTMG[btmg_device_on:56]:  detect hci0......
1654041621.413589: BTMG[btmg_device_on:56]:  detect hci0......
1654041624.413799: BTMG[btmg_device_on:56]:  detect hci0......
1654041627.413988: BTMG[btmg_device_on:56]:  detect hci0......
[   33.815257] pio-18: disabling
[   33.820482] pio-33: disabling
[   33.825579] usb1-vbus: disabling
1654041630.414198: BTMG[btmg_device_on:56]:  detect hci0......
1654041633.414398: BTMG[btmg_device_on:61]:  hci0 device available
1654041633.414449: BTMG[bt_test_status_cb:65]:  BT is off
1654041633.414474: BTMG[bt_test_adapter_power_state_cb:49]:  Failed to turn on bt
1654041633.414497: BTMG[bt_manager_enable:446]:  init HCI device failed!

按照官方的文档设置的，找不到hci0, WIFI 正常有没有人遇到过啊

vuiot

@yuzukitsuru T113 没有这个选项要怎么设置啊

vuiot

@zhouyuan369 不要用apt insatll repo 用后面的方法，刚踩完坑

vuiot

@whycanservice 谢谢大佬不过命令里面都没有这个我手动安装就可以了

vuiot

@whycanservice 在新 SDK 平台下载 D1-H/D1s SDK 中说：

repo start

这个错误怎么回事

vuiot

@xiaowenge 能帮忙推荐一下吗谢谢

vuiot

@xiaowenge 有T113-S3吗

vuiot

刚注册的时候可以下载，现在里面的东西全部空了，怎么解决

vuiot 发布的帖子