D1s 使用 XR829 BT 配置 a2dp-source 出错

柚木鉉 LV 9

首先按照帖子《D1 开发板使用 XR829 mesh fw 出现 code(56) 错误，如何解决》：
https://bbs.aw-ol.com/topic/361/share/1 配置了蓝牙，输出

root@TinaLinux:/# hciattach -n ttyS1 xradio >/dev/null 2>&1 &
root@TinaLinux:/# [  341.203731]sunxi-rfkill soc@3000000:rfkill@0: set block: 1
[  341.210080]sunxi-rfkill soc@3000000:rfkill@0: bt power off success
[  341.237565]sunxi-rfkill soc@3000000:rfkill@0: set block: 0
[  341.253736]sunxi-rfkill soc@3000000:rfkill@0: bt power on success
[  341.280858][XR_BT_LPM] bluedroid_write_proc_btwake: bluedroid_write_proc_btwake 1
[  341.289318][XR_BT_LPM] bluedroid_write_proc_btwake: wakeup bt device
[  341.296571][XR_BT_LPM] bluedroid_write_proc_lpm: disable lpm mode
root@TinaLinux:/# hciconfig -a hci0 up
root@TinaLinux:/# hciconfig
hci0:   Type: Primary  Bus: UART
        BD Address: 22:22:65:05:28:FE  ACL MTU: 1021:8  SCO MTU: 255:4
        UP RUNNING
        RX bytes:1154 acl:0 sco:0 events:54 errors:0
        TX bytes:744 acl:0 sco:0 commands:54 errors:0

然后bt_test -i -p a2dp-source

root@TinaLinux:/# bt_test -i -p a2dp-source
8163.127547: BTMG[bt_manager_enable:407]:  bt manager version:Version:3.0.1.202110291544,builed time:Oct 29 2021-09:42:35
8163.128196: BTMG[bt_test_status_cb:82]:  bt is turnning on.
Bluetooth init has been completed!!
ln: /var/lib/bluetooth: No such file or directory
bluetoothd[296]: Bluetooth daemon 5.54
D-Bus setup failed: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
bluetoothd[296]: Unable to get on D-Bus
bluealsa: Couldn't initialize controller thread: Bad file descriptor
8164.563437: BTMG[bt_profile_global_init:355]:  start bluealsa :1 times
8164.572354: BTMG[bt_routine:68]:  Couldn't obtain D-Bus connection: Could not connect: No such file or directory
8165.065054: BTMG[bt_manager_enable:449]:  init connection to bluez failed!
[  577.128339]sunxi-rfkill soc@3000000:rfkill@0: block state already is 1
stop bluetoothd and hciattach
8165.198016: BTMG[bt_test_status_cb:65]:  BT is off

估计是我什么配置的问题，麻烦大佬分析一下

whycan晕哥 LV 9

ln: /var/lib/bluetooth: No such file or directory
bluetoothd[296]: Bluetooth daemon 5.54
D-Bus setup failed: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
bluetoothd[296]: Unable to get on D-Bus
bluealsa: Couldn't initialize controller thread: Bad file descriptor

看起来好像没开 dbus？

柚木鉉 LV 9

@whycan dbus肯定开了的，不开都跑不起来

柚木鉉 LV 9

@whycan 看着像dbus-daemon没起来，但是我没找到怎么启动

柚木鉉 LV 9

@whycan
dbus报错

Unknown group "lp" in message bus configuration file
Failed to start message bus: Configuration file needs one or more <listen> elements giving addresses

柚木鉉 LV 9

改了一下conf

root@TinaLinux:/# cat /etc/dbus-1/system.d/bluetooth.conf
<!-- This configuration file specifies the required security policies
     for Bluetooth core daemon to work. -->

<!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
 "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
<busconfig>

  <!-- ../system.conf have denied everything, so we just punch some holes -->

  <policy user="root">
    <allow own="org.bluez"/>
    <allow send_destination="org.bluez"/>
    <allow send_type="method_call"/>
    <allow send_type="method_return"/>
    <allow send_interface="org.bluez.Agent1"/>
    <allow send_interface="org.bluez.MediaEndpoint1"/>
    <allow send_interface="org.bluez.MediaPlayer1"/>
    <allow send_interface="org.bluez.ThermometerWatcher1"/>
    <allow send_interface="org.bluez.AlertAgent1"/>
    <allow send_interface="org.bluez.Profile1"/>
    <allow send_interface="org.bluez.HeartRateWatcher1"/>
    <allow send_interface="org.bluez.CyclingSpeedWatcher1"/>
    <allow send_interface="org.bluez.GattCharacteristic1"/>
    <allow send_interface="org.bluez.GattDescriptor1"/>
    <allow send_interface="org.freedesktop.DBus.ObjectManager"/>
    <allow send_interface="org.freedesktop.DBus.Properties"/>
  </policy>

  <policy at_console="true">
    <allow send_path="/"/>
    <allow send_destination="org.bluez"/>

    <allow send_destination="org.bluez.Manager"/>
    <allow receive_sender="org.bluez.Manager"/>

    <allow send_destination="org.bluez.Adapter"/>
    <allow receive_sender="org.bluez.Adapter"/>

    <allow send_destination="org.bluez.Device"/>
    <allow receive_sender="org.bluez.Device"/>

    <allow send_destination="org.bluez.Service"/>
    <allow receive_sender="org.bluez.Service"/>

    <allow send_destination="org.bluez.Database"/>
    <allow receive_sender="org.bluez.Database"/>

    <allow send_destination="org.bluez.Security"/>
    <allow receive_sender="org.bluez.Security"/>
  </policy>

  <!-- allow users of lp group (printing subsystem) to
       communicate with bluetoothd -->

  <policy context="default">
    <deny send_destination="org.bluez"/>
  </policy>

</busconfig>

Failed to start message bus: Configuration file needs one or more <listen> elements giving addresses

柚木鉉 LV 9

/etc/init.d/dbus restart

然后就好了

root@TinaLinux:/# bt_test -i -p a2dp-source
11964.769186: BTMG[bt_manager_enable:407]:  bt manager version:Version:3.0.1.202110291544,builed time:Oct 29 2021-09:42:35
11964.769783: BTMG[bt_test_status_cb:82]:  bt is turnning on.
hcidump_xr existed
Bluetooth init has been completed!!
11964.938952: [a2dp_sink_thread_process:318]:  Couldn't read event: Bad message
11964.939616: [hfp_thread_process:711]:  Couldn't read event: Bad message
bluetoothd[275]: Endpoint unregistered: sender=:1.1 path=/A2DP/SBC/Sink/1
bluetoothd[275]: Endpoint registered: sender=:1.3 path=/A2DP/SBC/Source/1
11965.263831: BTMG[bt_profile_global_init:355]:  start bluealsa :1 times
11965.825855: BTMG[bt_test_adapter_power_state_cb:47]:  Turn on bt successfully
11966.266042: BTMG[bt_test_status_cb:67]:  BT is ON
scan 0[bt]1
[bt]#12145.074175: BTMG[bt_test_discovery_status_cb:91]:  bt start scanning.
12145.074243: BTMG[btmg_gap_bluez_callback:1228]:  Discovery started
12145.206434: BTMG[bt_test_dev_add_cb:115]:  address:EC:FA:5C:63:37:94,name:MI BT18 BLE,class:0,icon:(null),address type:public,rssi:-86

[bt]#12147.415742: BTMG[bt_test_dev_add_cb:115]:  address:A4:FC:77:29:EA:7A,name:KD-43X8500F,class:0,icon:(null),address type:public,rssi:-96
s
Invalid command
[bt]#
[bt]#sca12150.809068: BTMG[bt_test_dev_add_cb:115]:  address:EC:FA:5C:DD:66:16,name:MI BT18,class:3408900,icon:audio-card,address type:public,rssi:-53
12150.862888: BTMG[bt_test_update_rssi_cb:139]:  address:A4:FC:77:29:EA:7A,name:KD-43X8500F,rssi:-81
12150.872707: BTMG[bt_test_update_rssi_cb:139]:  address:EC:FA:5C:DD:66:16,name:MI BT18,rssi:-25
12150.893906: BTMG[bt_test_update_rssi_cb:139]:  address:EC:FA:5C:DD:66:16,name:MI BT18,rssi:-53
n12151.284176: BTMG[bt_test_update_rssi_cb:139]:  address:EC:FA:5C:DD:66:16,name:MI BT18,rssi:-25
12151.334754: BTMG[bt_test_update_rssi_cb:139]:  address:EC:FA:5C:DD:66:16,name:MI BT18,rssi:-55

12151.887915: BTMG[cmd_bt_discovery:86]:  Unexpected argc: 0, see help
[bt]#
[bt]#scan 0
[bt]#12155.870176: BTMG[btmg_gap_bluez_callback:1232]:  Discovery Stopped due to user input
12155.870297: BTMG[bt_test_discovery_status_cb:97]:  stop scan by user.

[bt]#connect EC:FA:5C:DD:66:16
12190.724040: BTMG[bt_test_a2dp_source_connection_state_cb:296]:  A2DP source connecting with device: EC:FA:5C:DD:66:16
addr:EC:FA:5C:DD:66:16,name:MI BT18,state:CONNECTED
bluetoothd[385]: Endpoint registered: sender=:1.4 path=/A2DP/SBC/Source/2
[bt]#bluetoothd[385]: Can't open input device: No such file or directory (2)
bluetoothd[385]: AVRCP: failed to init uinput for MI BT18
12192.076985: BTMG[bt_test_a2dp_source_connection_state_cb:298]:  A2DP source connected with device: EC:FA:5C:DD:66:16

柚木鉉 LV 9

xuan946248446 LV 2

@yuzukitsuru 请教下dbus-daemon没起来怎么解决的

xuan946248446 LV 2

@whycan 大佬，怎么从根本上解决这个问题，dbus-daemon能够自启动

Reidosclones123456 LV 1

@yuzukitsuru 你好朋友，我联系你是因为我开始使用电视盒，我遇到了一个问题，我找不到在 Linux 操作系统 Ubuntu 24.04.1 上刷新带有 Allwinner 处理器的盒子的工具长期运输服务