全志V853上的ARM A7和RISC-V E907是如何通信的
-
从全志V853的开发板框图可以看到,V853有一个Arm A7的主CPU和一个RISC-V E907的小CPU,那么中这两个不同架构的CPU之间是如何通信的呢?
我们从V853的datasheet给出的框图中可以看出,A7和E907是通过BUS通信的,两个CPU直接的关系和CPU与其它模块之间的关系类似。
物理上,A7 与 E907 通过硬件 msgbox 进行通信,软件框架上,A7 上基于 Linux 标准的
rpmsg 驱动框架,E907 基于 openamp 异构通信框架。
A7 端:包含 remoteproc 驱动和 rpmsg 驱动;E907 端:包含 msgbox 通信和 openamp 通
信;
其中 openamp 的框架如下:
OpenAMP: (https://github.com/OpenAMP/open-amp/)
This repository is the home for the Open Asymmetric Multi Processing (OpenAMP) framework project. The OpenAMP framework provides software components that enable development of software applications for Asymmetric Multiprocessing (AMP) systems. The framework provides the following key capabilities.
Provides Life Cycle Management, and Inter Processor Communication capabilities for management of remote compute resources and their associated software contexts.
Provides a stand alone library usable with RTOS and Baremetal software environments
Compatibility with upstream Linux remoteproc and rpmsg components
Following AMP configurations supported a. Linux master/Generic(Baremetal) remote b. Generic(Baremetal) master/Linux remote
Proxy infrastructure and supplied demos showcase ability of proxy on master to handle printf, scanf, open, close, read, write calls from Bare metal based remote contexts. -
别一点一点上啊,一把梭哈全放出来过瘾
-
别一点一点上啊,一把梭哈全放出来过瘾
-
@xiaowenge 别一点一点上啊,一把梭哈全放出来过瘾
-
@allwinnertech 最好把芯片也放出来
-
此回复已被删除!
Copyright © 2024 深圳全志在线有限公司 粤ICP备2021084185号 粤公网安备44030502007680号