melis4.0启动问题

[honglingjin]

请教一下，能否有人指导一下F133-A的melis4.0启动！
芯片型号：F133-A
平台：D1S
编译环境：Ubuntu16.04
NORFLASH型号：


请问出现这种情况是FLASH芯片不支持吗？

[YuzukiTsuru]

[40]BOOT0 commit : 889f614
[42]set pll start
[44]periph0 has been enabled
[47]set pll end
[48][pmu]: bus read error
[51]board init ok
[53]enable_jtag
[54]ZQ value = 0x2d
[56]get_pmu_exist() = -1
[58]DRAM BOOT DRIVE INFO: V0.32
[61]DRAM CLK = 528 MHz
[63]DRAM Type = 2 (2:DDR2,3:DDR3)
[66]DRAMC read ODT  off.
[69]DRAM ODT off.
[71]ddr_efuse_type: 0xa
[73]mark_id: 0x5c
[75]DRAM SIZE =64 M
[77]PLL_DDR_CTRL_REG:0xf9002b00
[80]DRAM_CLK_REG:0xc0000000
[82][TIMING DEBUG] MR2= 0x0
[87]DRAM simple test OK.
[89]dram size =64
[91]spinor id is: ef 70 18, read cmd: 6b
[94]Succeed in reading toc file head.
[98]The size of toc is 98000.
[126]Entry_name        = melis-lzma
[129]LZMA: Image address............... 0x41000400
[134]LZMA: Properties address.......... 0x41000400
[138]LZMA: Uncompressed size address... 0x41000405
[143]LZMA: Compressed data address..... 0x4100040d
[147]LZMA: Destination address......... 0x40000000
[152]LZMA: Uncompresed size............ 0xffffffffffffffff
[157]LZMA: Compresed size.............. 0xfffffffa
[337]LZMA: Uncompressed ............... 0x00123410
[342]Entry_name        = melis-config
[345]image_base:43000000
[348]Jump to second Boot.
[350]jump to rtos
sbi2ekernel
===============================================================================================================
|                   /'\_/`\       (_ )  _                       /'_  )    /'_ `\   /' _`\                     |
|                   |     |   __   | | (_)  ___  ______  _   _ (_)_) |   ( (_) |   | ( ) |                    |
|                   | (_) | /'__`\ | | | |/',__)(______)( ) ( ) _(_ <     \__, |   | | | |                    |
|                   | | | |(  ___/ | | | |\__, \        | \_/ |( )_) | _     | | _ | (_) |                    |
|                   (_) (_)`\____)(___)(_)(____/        `\___/'`\____)(_)    (_)(_)`\___/'                    |
|version : V3.9.0                                                                                             |
|commitid: c6bf140930185e29f6e12888005ea61634ae7e5a                                                           |
|sunxiver: 30800                                                                                              |
|timever : Tue, 29 Mar 2022 20:33:56 +0800                                                                    |
|compiler: gcc version 8.4.0 (T-HEAD RISCV Tools V1.10.2 B20201104)                                           |
|optimal : -Os -g -gdwarf-2 -gstrict-dwarf                                                                    |
|linker  : GNU ld (GNU Binutils) 2.32                                                                         |
|newlibc : 3.0.0                                                                                              |
|author  : yuzuki                                                                                             |
===============================================================================================================

[DBG]: [__mount_parts:0273]:                                classname=DMS
[DBG]: [__mount_parts:0274]:                                devname=dms01
[DBG]: [__mount_parts:0301]:                                find last lun.
[DBG]: [__mount_parts:0331]:                                nPart = 1.
[DBG]: [__mount_parts:0460]:                                dmsPart: "DMS\dms010" is linked to symbel "B".
[ERR]: [esFSYS_pread:0318]:                                 fs fatal err
[ERR]: [esFSYS_pread:0318]:                                 fs fatal err
[ERR]: [esFSYS_pread:0318]:                                 fs fatal err
[ERR]: [esFSYS_pread:0318]:                                 fs fatal err
[DBG]: [esFSYS_mntfs:0317]:                                 devfs,mount on B.
[DBG]: [kservice_maintask:0834]:                            partition [B] plug in..
[DBG]: [__mount_parts:0273]:                                classname=DISK
[DBG]: [__mount_parts:0274]:                                devname=RAMDISK
[DBG]: [__mount_parts:0301]:                                find last lun.
[DBG]: [__mount_parts:0331]:                                nPart = 1.
[DBG]: [__mount_parts:0460]:                                rawpart: "DISK\▒[ERR]: [match_nor:0376]: spinor: not match any id on factory 0xef ids table

[ERR]: [nor_scan:0495]:                                     spinor: scan nor flash failed

[ERR]: [nor_init:0571]:                                     spinor: init nor flash failed

[ERR]: [nor_read:0880]:                                     spinor: read address 0xc000 with len 16384 failed


[ERR]: [register_blk_device:0862]:                          get gpt from nor flash failed - 4294967291

SDC:hal_sdc_create host:0x401b65d8 id:0
[ERR] SDC:name sdc0_d1,port 6,port_num 0,mul_sel 2, pull 1, drv_level 1
[ERR] SDC:name sdc0_d0,port 6,port_num 1,mul_sel 2, pull 1, drv_level 1
[ERR] SDC:name sdc0_clk,port 6,port_num 2,mul_sel 2, pull 1, drv_level 1
[ERR] SDC:name sdc0_cmd,port 6,port_num 3,mul_sel 2, pull 1, drv_level 1
[ERR] SDC:name sdc0_d3,port 6,port_num 4,mul_sel 2, pull 1, drv_level 1
[ERR] SDC:name sdc0_d2,port 6,port_num 5,mul_sel 2, pull 1, drv_level 1
SDC:Not implement __mci_restore_io,793
SDC:Not imp hal_sdc_init,2206
SDC:hal_sdc_init,2239 no imp
SDC:hal_sdc_init,2248 no imp
SDC:SDC Host Capability:0x3820f Ocr avail:0x3f0000
SDC:SDC cd_mode:2 present_val:0
SDC:SDC id:0 dma_use:1 present:1
 driver version SD/MMC/SDIO Host Controller Driver(v0.28 2021-08-24 16:50) init ok.
host_id =0!
[ERR]: [hal_ths_init:0094]:                                 0x2009404, 0x2009400, 0

我这更惨

[memory]

感觉TF卡的问题

[godzhou0909]

@yuzukitsuru 我也是这个问题，请问怎么解决呢？