memory 发布的帖子

U-Boot SPL 2018.05-orangepi (Mar 16 2021 - 14:43:53 +0800)
DRAM: 1024 MiB
Trying to boot from MMC1


U-Boot 2018.05-orangepi (Mar 16 2021 - 14:43:53 +0800) Allwinner Technology

CPU:   Allwinner H3 (SUN8I 1680)
Model: Xunlong Orange Pi Lite
DRAM:  1 GiB
MMC:   SUNXI SD/MMC: 0
Loading Environment from FAT... unable to select a mode
** Bad device mmc 0 **
Failed (-5)
In:    serial@01c28000
Out:   serial@01c28000
Err:   serial@01c28000
Net:   No ethernet found.
starting USB...
USB0:   USB EHCI 1.00
USB1:   USB OHCI 1.0
USB2:   USB EHCI 1.00
USB3:   USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Autoboot in 1 seconds, press <Space> to stop

Device 0: device type unknown
... is now current device
** Bad device usb 0 **
** Bad device usb 0 **
No ethernet found.
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-sunxi
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
No ethernet found.
Config file not found
No ethernet found.
=>

烧了个香橙派官方固件 Orangepilite_2.1.0_ubuntu_xenial_desktop_linux3.4.113.img 发现居然启不动。

一狠心剪了一根绿联的USB线，直接焊上， 基本OK， 可以进入FEL模式，正在下载固件。

板子收到， 还不错，带外壳，可惜没电源。

看描述，反正撬之前是可以用的，只是eMMC芯片和焊盘挂了，我看了板子背面还有TF卡可以抢救，如果抢救失败就当35元扔水里面了。

https://market.m.taobao.com/app/idleFish-F2e/fish-pc/web/detail.html?id=666636060635

宝贝介绍
orange pi pc plus 开发板，有内存芯片撬坏了，板应该是报废了，板上BGA焊盘都掉了。只能拆芯片片了。其他芯片应该还是好的，反正撬之前是可以用的，我手贱，想把散热片撬下来，结果把内存芯片给撬下来了。。

品牌 香橙派
成色 轻微使用痕迹

@anruliu

#define SUNXI_FB_MAX 2

这样改了之后，确实有 fb0 和 fb1 了。

[ 0.000000] OF: fdt: Ignoring memory range 0x40000000 - 0x40200000
[ 0.000000] Linux version 5.4.61 (memory@ubuntu) (riscv64-unknown-linux-gnu-gcc (C-SKY RISCV Tools V1.8.4 B20200702) 8.1.0, GNU ld (GNU Binutils) 2.32) #357 PREEMPT Tue Jan 18 09:18:31 UTC 2022
[ 0.000000] cma: Reserved 8 MiB at 0x0000000043800000

$ date

Tue Jan 18 17:35:49 CST 2022

请问怎么让D1的Linux log 显示 CST北京时间呢？

判断BGA引脚有无虚焊的方法：

万用表打到二极管档（或者短路档），
红表笔接地，
黑表笔量CPU引脚对应引出线，
一般正常读数为 0.25V～0.8V，
无穷大（即读数为1）时为假焊，
为0时即是短路或击穿，
最准就是用块好板对比读数。

这是哪个PHY芯片呢？

55寸的 电子表你见过吗？

源码补丁包下载： d1_hdmionly_ucgi_demo_whycanpi_patch_src_20220110.tgz

全志官方格式TF卡固件下载： tina_d1-hdmionly_ucgui_demo_uart0_20220110.img.7z

开机运行ucgui demo

先执行： source build/envsetup.sh

再执行： lunch d1_hdmionly-tina

然后执行： make

接着执行： pack

就会生成： out/d1-hdmionly/tina_d1-hdmionly_uart0.img

规格书中文版： Sipeed Lichee RV DOCK 规格书 V1.0.pdf

规格书英文版： Sipeed Lichee RV DOCK Datasheet V1.0.pdf

购买地址： https://item.taobao.com/item.htm?id=666274331852

资料下载地址： https://dl.sipeed.com/shareURL/LICHEE/D1/Lichee_RV-Dock

WIKI： https://wiki.sipeed.com/hardware/zh/lichee/RV/Dock.html

D1哪吒v1.2版本原理图与PCB源文件.7z

@yaoxiaoyao

想不到 8723 居然那么多后缀

楼主优秀！ 这是 RTL8723BS 还是 RTL8723DS 呢？

root@TinaLinux:/# hexdump  /sys/firmware/devicetree/base/soc@3000000/spi@4025000
/spi-nand@0/spi-max-frequency
0000000 f505 00e1
0000004
root@TinaLinux:/#

只找到这个节点，而且只读，不能写。

翻了一下手册，支持 HV RGB / i80 / LVDS / MIPI / CVBS / HDMI。不支持EDP。

开机自动从HDMI输出参考这个帖子：

【固件发布】D1哪吒HDMI测试固件20210804（开机HDMI就有小企鹅启动logo）
https://bbs.aw-ol.com/topic/297/share/4

@mangogeek
RGB

TF卡固件下载： tina_d1-sipeed_licheerv_86panel_rgb480x480_uart0_20211226_开机运行lvgl_demo_带触摸.img.7z （SPI NAND FLASH 未测试）

5寸 800x480 LCD 固件： tina_d1-mangopi_mq_rgb800x480_gt9xx_uart0_可能修复了某些显示屏问题_2021-12-24.7z

给麻雀做件衣裳
https://bbs.aw-ol.com/topic/816/share/9

受限于工艺，有些地方还不是很合适，再改改看效果再发布文件。

@yaoxiaoyao
感谢分享宝贵经验

rate_lavcrate.c: In function 'pcm_src_init':
rate_lavcrate.c:96:19: warning: implicit declaration of function 'av_resample_init'; did you mean 'av_get_sample_fmt'? [-Wimplicit-function-declaration]
   rate->context = av_resample_init(info->out.rate, info->in.rate,
                   ^~~~~~~~~~~~~~~~
                   av_get_sample_fmt
rate_lavcrate.c:96:17: warning: assignment to 'struct AVResampleContext *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
   rate->context = av_resample_init(info->out.rate, info->in.rate,
                 ^
rate_lavcrate.c: In function 'pcm_src_convert_s16':
rate_lavcrate.c:186:9: warning: implicit declaration of function 'av_resample'; did you mean 'av_rescale'? [-Wimplicit-function-declaration]
   ret = av_resample(rate->context, rate->out[i],
         ^~~~~~~~~~~
         av_rescale
rate_lavcrate.c:194:2: warning: implicit declaration of function 'av_resample_compensate'; did you mean 'av_get_sample_fmt_name'? [-Wimplicit-function-declaration]
  av_resample_compensate(rate->context,
  ^~~~~~~~~~~~~~~~~~~~~~
  av_get_sample_fmt_name
mv -f .deps/rate_lavcrate.Tpo .deps/rate_lavcrate.Plo
/bin/bash ../libtool  --tag=CC   --mode=link riscv64-unknown-linux-gnu-gcc -Wall -g -I/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/staging_dir/target/usr/include -I/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/staging_dir/target/usr/include/alsa -I/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/staging_dir/target/usr/include -DAVCODEC_HEADER="<libavcodec/avcodec.h>" -Os -pipe -mcmodel=medany -mabi=lp64d -march=rv64gcxthead -g3 -fno-caller-saves -Wno-format-truncation -Wno-unused-result  -Wl,-z,now -Wl,-z,relro -fpic -pthread  -module -avoid-version -export-dynamic -no-undefined -Wl,--no-undefined -L/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/staging_dir/target/usr/lib -L/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/staging_dir/target/lib -L/opt/D1/home/nihao/sdk/tina-d1-open_new/prebuilt/gcc/linux-x86/riscv/toolchain-thead-glibc/riscv64-glibc-gcc-thead_20200702/usr/lib -L/opt/D1/home/nihao/sdk/tina-d1-open_new/prebuilt/gcc/linux-x86/riscv/toolchain-thead-glibc/riscv64-glibc-gcc-thead_20200702/lib -znow -zrelro -lm -ldl  -o libasound_module_rate_lavcrate.la -rpath /usr/lib/alsa-lib rate_lavcrate.lo -L/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/staging_dir/target/usr/lib -lasound -L/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/staging_dir/target/usr/lib -lavcodec -lavutil -lasound
OpenWrt-libtool: link: riscv64-unknown-linux-gnu-gcc -shared  -fPIC -DPIC  .libs/rate_lavcrate.o   -L/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/staging_dir/target/usr/lib -L/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/staging_dir/target/lib -L/opt/D1/home/nihao/sdk/tina-d1-open_new/prebuilt/gcc/linux-x86/riscv/toolchain-thead-glibc/riscv64-glibc-gcc-thead_20200702/usr/lib -L/opt/D1/home/nihao/sdk/tina-d1-open_new/prebuilt/gcc/linux-x86/riscv/toolchain-thead-glibc/riscv64-glibc-gcc-thead_20200702/lib -lm -ldl -lavcodec -lavutil -lasound  -Os -mcmodel=medany -mabi=lp64d -march=rv64gcxthead -Wl,-z -Wl,now -Wl,-z -Wl,relro -pthread -Wl,--no-undefined   -pthread -Wl,-soname -Wl,libasound_module_rate_lavcrate.so -o .libs/libasound_module_rate_lavcrate.so
/opt/D1/home/nihao/sdk/tina-d1-open_new/prebuilt/gcc/linux-x86/riscv/toolchain-thead-glibc/riscv64-glibc-gcc-thead_20200702/bin/../lib/gcc/riscv64-unknown-linux-gnu/8.1.0/../../../../riscv64-unknown-linux-gnu/bin/ld: .libs/rate_lavcrate.o: in function `pcm_src_convert_s16':
/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/compile_dir/target/alsa-plugins-1.1.4/rate-lavc/rate_lavcrate.c:194: undefined reference to `av_resample_compensate'
/opt/D1/home/nihao/sdk/tina-d1-open_new/prebuilt/gcc/linux-x86/riscv/toolchain-thead-glibc/riscv64-glibc-gcc-thead_20200702/bin/../lib/gcc/riscv64-unknown-linux-gnu/8.1.0/../../../../riscv64-unknown-linux-gnu/bin/ld: /opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/compile_dir/target/alsa-plugins-1.1.4/rate-lavc/rate_lavcrate.c:187: undefined reference to `av_resample'
/opt/D1/home/nihao/sdk/tina-d1-open_new/prebuilt/gcc/linux-x86/riscv/toolchain-thead-glibc/riscv64-glibc-gcc-thead_20200702/bin/../lib/gcc/riscv64-unknown-linux-gnu/8.1.0/../../../../riscv64-unknown-linux-gnu/bin/ld: .libs/rate_lavcrate.o: in function `pcm_src_free':
/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/compile_dir/target/alsa-plugins-1.1.4/rate-lavc/rate_lavcrate.c:51: undefined reference to `av_resample_close'
/opt/D1/home/nihao/sdk/tina-d1-open_new/prebuilt/gcc/linux-x86/riscv/toolchain-thead-glibc/riscv64-glibc-gcc-thead_20200702/bin/../lib/gcc/riscv64-unknown-linux-gnu/8.1.0/../../../../riscv64-unknown-linux-gnu/bin/ld: .libs/rate_lavcrate.o: in function `pcm_src_init':
/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/compile_dir/target/alsa-plugins-1.1.4/rate-lavc/rate_lavcrate.c:91: undefined reference to `av_resample_init'
collect2: error: ld returned 1 exit status
Makefile:419: recipe for target 'libasound_module_rate_lavcrate.la' failed
make[6]: *** [libasound_module_rate_lavcrate.la] Error 1
make[6]: Leaving directory '/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/compile_dir/target/alsa-plugins-1.1.4/rate-lavc'
Makefile:431: recipe for target 'all-recursive' failed
make[5]: *** [all-recursive] Error 1
make[5]: Leaving directory '/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/compile_dir/target/alsa-plugins-1.1.4'
Makefile:363: recipe for target 'all' failed
make[4]: *** [all] Error 2
make[4]: Leaving directory '/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/compile_dir/target/alsa-plugins-1.1.4'
Makefile:89: recipe for target '/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/compile_dir/target/alsa-plugins-1.1.4/.built' failed
make[3]: *** [/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/compile_dir/target/alsa-plugins-1.1.4/.built] Error 2
make[3]: Leaving directory '/opt/D1/home/nihao/sdk/tina-d1-open_new/package/libs/alsa-plugins'
package/Makefile:192: recipe for target 'package/libs/alsa-plugins/compile' failed
make[2]: *** [package/libs/alsa-plugins/compile] Error 2
make[2]: Leaving directory '/opt/D1/home/nihao/sdk/tina-d1-open_new'
package/Makefile:189: recipe for target '/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/staging_dir/target/stamp/.package_compile' failed
make[1]: *** [/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/staging_dir/target/stamp/.package_compile] Error 2
make[1]: Leaving directory '/opt/D1/home/nihao/sdk/tina-d1-open_new'
Build failed - please re-run with -j1 to see the real error message
/opt/D1/home/nihao/sdk/tina-d1-open_new/build/toplevel.mk:304: recipe for target 'world' failed
make: *** [world] Error 1

#### make failed to build some targets (39:16 (mm:ss)) ####

ubuntu:/opt/D1/home/nihao/sdk/tina-d1-open_new$

编译出错了。

@jordonwu
孤陋寡闻了，以前只听说过 RX / TX 整组翻转自适应，还不知道 + / - 自适应。

感谢分享， 建立会话(session)还会丢配置吗？以后每次都点会话打开串口。

意外发现， RX- / RX+ 交换， 网络还能正常工作。

有线网络正常。

root@tinaLinux:/# udhcpc -i eth0
udhcpc: started, v1.27.2
[   42.597008] libphy: 4500000.eth: probed
[   42.602212] sunxi-gmac 4500000.eth eth0: eth0: Type(7) PHY ID 001cc816 at 0 IRQ poll (4500000.eth-0:00)
udhcpc: sending discover
[   45.762934] sunxi-gmac 4500000.eth eth0: Link is Up - 100Mbps/Full - flow control off
udhcpc: sending discover[   45.772171] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

udhcpc: sending select for 192.168.3.29
udhcpc: lease of 192.168.3.29 obtained, lease time 86400
udhcpc: ifconfig eth0 192.168.3.29 netmask 255.255.255.0 broadcast +
udhcpc: setting default routers: 192.168.3.1
root@MaixLinux:/#
root@MaixLinux:/#
root@MaixLinux:/#
root@MaixLinux:/# ping www.163.com -s 4096
PING www.163.com (120.240.166.184): 4096 data bytes
4104 bytes from 120.240.166.184: seq=0 ttl=55 time=10.319 ms
4104 bytes from 120.240.166.184: seq=1 ttl=55 time=10.268 ms
4104 bytes from 120.240.166.184: seq=2 ttl=55 time=10.185 ms
4104 bytes from 120.240.166.184: seq=3 ttl=55 time=10.217 ms
4104 bytes from 120.240.166.184: seq=4 ttl=55 time=10.366 ms

phy id 正常的日志是这样的。

root@TinaLinux:/# udhcpc -i eth0
udhcpc: started, v1.27.2
[  279.444999] libphy: 4500000.eth: probed
[  279.450198] sunxi-gmac 4500000.eth eth0: eth0: Type(8) PHY ID 001cc816 at 0 IRQ poll (4500000.eth-0:00)
[  279.520873] sunxi-gmac 4500000.eth eth0: Initialize hardware error
[  279.527914] ------------[ cut here ]------------
[  279.533299] called from state READY
[  279.537241] WARNING: CPU: 0 PID: 624 at drivers/net/phy/phy.c:839 phy_stop+0x72/0x82
[  279.546088] Modules linked in: xt_time xt_multiport xt_mark xt_mac xt_limit xt_comment xt_TCPMSS xt_LOG iptable_filter ipt_REJECT uvcvideo videobuf2_vmalloc videobuf2_memops fuse
[  279.564267] CPU: 0 PID: 624 Comm: ifconfig Tainted: G        W         5.4.61 #221
[  279.572824] sepc: ffffffe000359d7e ra : ffffffe000359d7e sp : ffffffe01c31fb30
[  279.581074]  gp : ffffffe0008ce8f0 tp : ffffffe01ccf9580 t0 : ffffffe0008df578
[  279.589183]  t1 : 0000000000000064 t2 : 0000000000000000 s0 : ffffffe01c31fb60
[  279.597629]  s1 : ffffffe01da1f000 a0 : 0000000000000017 a1 : 000000000000000a
[  279.605805]  a2 : 000000000000016c a3 : ffffffe00083cea0 a4 : ffffffe00083ce08
[  279.614052]  a5 : 0000000000000000 a6 : 000000000000020a a7 : 0000000000000000
[  279.622211]  s2 : 0000000000000002 s3 : 0000000000001000 s4 : 0000000000000001
[  279.630518]  s5 : 0000000000001000 s6 : fffffffffffff000 s7 : ffffffe01da1f000
[  279.638680]  s8 : ffffffe01d296800 s9 : 0000000000000000 s10: 0000000000009000
[  279.646928]  s11: 0000000000000000 t3 : ffffffe0008d8b00 t4 : 0000000000000350
[  279.655099]  t5 : 0000000000000350 t6 : ffffffe0008d907e
[  279.661370] sstatus: 0000000200000120 sbadaddr: 0000000000000000 scause: 0000000000000003
[  279.670545] ---[ end trace 1094f6428fc0a267 ]---
udhcpc: sending discover
udhcpc: sendto: Network is down
udhcpc: read error: Network is down, reopening socket

用错PHY驱动了，可能也会这样。

垃圾堆翻出了一个螺丝，然后用老虎钳夹了前面一部分，终于把它怼进去了。

这下给我挖坑了，这里前不着村后不着店的，哪里去找这个M.2螺丝。

咦，怎么没外壳呢。

喔，补发，还好去看了一下。

开箱

淘宝： https://item.taobao.com/item.htm?id=663345415205

教程： https://bbs.sipeed.com/thread/1300

原理图： https://dl.sipeed.com/shareURL/LICHEE/D1/Lichee_RV_86_panel

源码patch： d1-mangopi_mq_source_patch_20211221_by_whycan.tgz

主要修改， etc/init.d/boot 脚本添加：

mount -o remount -o rw /dev/root

TF卡烧写固件： 芒果派麻雀固件，支持WIFI 2021-12-21.img.7z

这个WIFI 应该 OK了：

wifi_connect_ap_test whycan 13800138000

前面有朋友说连不上 WIFI 热点， 我试了一下，果然不行，楼主又挖坑啦。。。

那试一试这样吧：

mount -o remount -o rw /dev/root
/etc/init.d/wpa_supplicant start
wifi_connect_ap_test whycan 13800138000

这样应该问题不大了。

WIFI 驱动参考 https://linux-sunxi.org/Wifi

RTL8189FTV
Driver has its own repository:

git clone https://github.com/jwrdegoede/rtl8189ES_linux.git
cd rtl8189ES_linux.git
git checkout -B rtl8189fs origin/rtl8189fs
make -j4 ARCH=arm CROSS_COMPILE=arm-linux-gnu- KSRC=../linux

复制到 lichee/linux-5.4/drivers/net/wireless/ 目录。

还行还行

3D打印试一试

面盖： MQt.stl

底盖： MQb.stl

固件： 芒果派麻雀固件，支持WIFI 2021-12-19.7z

源码补丁： d1-mangopi_mq_source_patch_20211219_by_whycan.tgz

支持麻雀自带的WIFI模块自带的 RTL8189FTV。

解压会覆盖你修改的文件，重要文件请先保存！
解压会覆盖你修改的文件，重要文件请先保存！
解压会覆盖你修改的文件，重要文件请先保存！

启动日志：

[32]HELLO! BOOT0 is starting!
[35]BOOT0 commit : 27369ab
[37]set pll start
[39]periph0 has been enabled
[42]set pll end
[44][pmu]: bus read error
[46]board init ok
[48]ZQ value = 0x2f***********
[51]get_pmu_exist() = -1
[53]ddr_efuse_type: 0xa
[56][AUTO DEBUG] single rank and full DQ!
[60]ddr_efuse_type: 0xa
[63][AUTO DEBUG] rank 0 row = 13
[66][AUTO DEBUG] rank 0 bank = 4
[69][AUTO DEBUG] rank 0 page size = 2 KB
[72]DRAM BOOT DRIVE INFO: V0.24
[75]DRAM CLK = 528 MHz
[78]DRAM Type = 2 (2:DDR2,3:DDR3)
[81]DRAMC read ODT  off.
[83]DRAM ODT off.
[85]ddr_efuse_type: 0xa
[87]DRAM SIZE =64 M
[91]DRAM simple test OK.
[93]dram size =64
[95]card no is 0
[97]sdcard 0 line count 4
[99][mmc]: mmc driver ver 2021-04-2 16:45
[108][mmc]: Wrong media type 0x0
[111][mmc]: ***Try SD card 0***
[120][mmc]: HSSDR52/SDR25 4 bit
[123][mmc]: 50000000 Hz
[125][mmc]: 1904 MB
[127][mmc]: ***SD/MMC 0 init OK!!!***
[174]Loading boot-pkg Succeed(index=0).
[178]Entry_name        = opensbi
[181]Entry_name        = u-boot
[185]Entry_name        = dtb
[187]mmc not para
[189]Jump to second Boot.

OpenSBI v0.6
   ____                    _____ ____ _____
  / __ \                  / ____|  _ \_   _|
 | |  | |_ __   ___ _ __ | (___ | |_) || |
 | |  | | '_ \ / _ \ '_ \ \___ \|  _ < | |
 | |__| | |_) |  __/ | | |____) | |_) || |_
  \____/| .__/ \___|_| |_|_____/|____/_____|
        | |
        |_|

Platform Name          : T-HEAD Xuantie Platform
Platform HART Features : RV64ACDFIMSUVX
Platform Max HARTs     : 1
Current Hart           : 0
Firmware Base          : 0x40000400
Firmware Size          : 75 KB
Runtime SBI Version    : 0.2

MIDELEG : 0x0000000000000222
MEDELEG : 0x000000000000b1ff
PMP0    : 0x0000000040000000-0x000000004001ffff (A)
PMP1    : 0x0000000040000000-0x000000007fffffff (A,R,W,X)
PMP2    : 0x0000000000000000-0x0000000007ffffff (A,R,W)
PMP3    : 0x0000000009000000-0x000000000901ffff (▒

U-Boot 2018.05-g0a88ac9 (Apr 30 2021 - 11:23:28 +0000) Allwinner Technology

[00.272]DRAM:  64 MiB
[00.274]Relocation Offset is: 01ef0000
[00.278]secure enable bit: 0
[00.281]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz  MBus=300Mhz
[00.287]flash init start
[00.289]workmode = 0,storage type = 1
[00.293][mmc]: mmc driver ver uboot2018:2021-04-16 14:23:00-1
[00.298][mmc]: get sdc_type fail and use default host:tm1.
[00.305][mmc]: can't find node "mmc0",will add new node
[00.309][mmc]: fdt err returned <no error>
[00.313][mmc]: Using default timing para
[00.317][mmc]: SUNXI SDMMC Controller Version:0x50310
[00.334][mmc]: card_caps:0x3000000a
[00.337][mmc]: host_caps:0x3000003f
[00.341]sunxi flash init ok
[00.343]line:714 init_clocks
__clk_init: clk pll_periph0x2 already initialized
register fix_factor clk error
[00.353]drv_disp_init
fdt_getprop_u32 s_pwm.pwm-base fail
[00.369]drv_disp_init finish
[00.372]boot_gui_init:start
[00.375]set disp.dev2_output_type fail. using defval=0
[00.381]boot_gui_init:finish
partno erro : can't find partition bootloader
54 bytes read in 1 ms (52.7 KiB/s)
[00.404]bmp_name=bootlogo.bmp size 1152054
1152054 bytes read in 50 ms (22 MiB/s)
[00.479]Loading Environment from SUNXI_FLASH... OK
[00.498]out of usb burn from boot: not need burn key
root_partition is rootfs
set root to /dev/mmcblk0p5
[00.509]update part info
[00.512]update bootcmd
[00.515]change working_fdt 0x42aafda8 to 0x42a8fda8
[00.536]update dts
Hit any key to stop autoboot:  0
[00.561]LCD open finish
Android's image name: d1-mangopi_mq_rg
No reserved memory region found in source FDT
[00.978]
Starting kernel ...

[00.981][mmc]: MMC Device 2 not found
[00.984][mmc]: mmc 2 not find, so not exit
[    0.000000] OF: fdt: Ignoring memory range 0x40000000 - 0x40200000
[    0.000000] Linux version 5.4.61 (whycan@ubuntu) (riscv64-unknown-linux-gnu-gcc (C-SKY RISCV Tools V1.8.4 B20200702) 8.1.0, GNU ld (GNU Binutils) 2.32) #1 PREEMPT Mon Dec 20 13:27:25 UTC 2021
[    0.000000] cma: Reserved 8 MiB at 0x0000000043800000
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000040200000-0x0000000043ffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040200000-0x0000000043ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040200000-0x0000000043ffffff]
[    0.000000] On node 0 totalpages: 15872
[    0.000000]   DMA32 zone: 217 pages used for memmap
[    0.000000]   DMA32 zone: 0 pages reserved
[    0.000000]   DMA32 zone: 15872 pages, LIFO batch:3
[    0.000000] elf_hwcap is 0x20112d
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 15655
[    0.000000] Kernel command line: earlyprintk=sunxi-uart,0x02500000 clk_ignore_unused initcall_debug=0 console=ttyS0,115200 loglevel=8 root=/dev/mmcblk0p5 init=/sbin/init partitions=boot-resource@mmcblk0p1:env@mmcblk0p2:env-redund@mmcblk0p3:boot@mmcblk0p4:rootfs@mmcblk0p5:dsp0@mmcblk0p6:recovery@mmcblk0p7:UDISK@mmcblk0p8 cma=8M snum= mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 androidboot.mode=normal androidboot.hardware=sun20iw1p1 boot_type=1 androidboot.boot_type=1 gpt=1 uboot_message=2018.05-g0a88ac9(04/30/2021-11:23:28) mbr_offset=15
[    0.000000] Dentry cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.000000] Inode-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.000000] Sorting __ex_table...
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 42192K/63488K available (6104K kernel code, 650K rwdata, 2103K rodata, 196K init, 252K bss, 13104K reserved, 8192K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
[    0.000000] plic: mapped 200 interrupts with 1 handlers for 2 contexts.
[    0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [0]
[    0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000026] riscv_timer_clockevent depends on broadcast, but no broadcast function available
[    0.000378] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.001014] Console: colour dummy device 80x25
[    0.001063] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.001082] pid_max: default: 32768 minimum: 301
[    0.001282] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.001303] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.003390] ASID allocator initialised with 65536 entries
[    0.003588] rcu: Hierarchical SRCU implementation.
[    0.004319] devtmpfs: initialized
[    0.017181] random: get_random_u32 called from bucket_table_alloc.isra.31+0x4e/0x15e with crng_init=0
[    0.018347] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.018382] futex hash table entries: 256 (order: 0, 6144 bytes, linear)
[    0.018937] pinctrl core: initialized pinctrl subsystem
[    0.020642] NET: Registered protocol family 16
[    0.022846] DMA: preallocated 256 KiB pool for atomic allocations
[    0.023586] cpuidle: using governor menu
[    0.065894] rtc_ccu: sunxi ccu init OK
[    0.074243] clock: sunxi ccu init OK
[    0.075324] clock: sunxi ccu init OK
[    0.114806] iommu: Default domain type: Translated
[    0.115016] sunxi iommu: irq = 4
[    0.116297] SCSI subsystem initialized
[    0.116705] usbcore: registered new interface driver usbfs
[    0.116801] usbcore: registered new interface driver hub
[    0.116919] usbcore: registered new device driver usb
[    0.117139] mc: Linux media interface: v0.10
[    0.117224] videodev: Linux video capture interface: v2.00
[    0.118510] sunxi-msgbox-amp 3003000.msgbox: invalid resource
[    0.119334] Advanced Linux Sound Architecture Driver Initialized.
[    0.119993] Bluetooth: Core ver 2.22
[    0.120088] NET: Registered protocol family 31
[    0.120100] Bluetooth: HCI device and connection manager initialized
[    0.120125] Bluetooth: HCI socket layer initialized
[    0.120145] Bluetooth: L2CAP socket layer initialized
[    0.120193] Bluetooth: SCO socket layer initialized
[    0.120653] pwm module init!
[    0.123445] clocksource: Switched to clocksource riscv_clocksource
[    0.137721] sun8iw20-pinctrl 2000000.pinctrl: initialized sunXi PIO driver
[    0.156440] thermal_sys: Registered thermal governor 'step_wise'
[    0.156446] thermal_sys: Registered thermal governor 'user_space'
[    0.157051] NET: Registered protocol family 2
[    0.157940] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.157990] TCP established hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.158011] TCP bind hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.158027] TCP: Hash tables configured (established 512 bind 512)
[    0.158208] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.158256] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.158551] NET: Registered protocol family 1
[    0.161498] Initialise system trusted keyrings
[    0.161827] workingset: timestamp_bits=62 max_order=14 bucket_order=0
[    0.170458] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.192097] Key type asymmetric registered
[    0.192116] Asymmetric key parser 'x509' registered
[    0.192142] io scheduler mq-deadline registered
[    0.192152] io scheduler kyber registered
[    0.192177] atomic64_test: passed
[    0.193640] [DISP]disp_module_init
[    0.194366] disp 5000000.disp: Adding to iommu group 0
[    0.195119] [DISP] disp_init,line:2385:
[    0.195126] smooth display screen:0 type:1 mode:4
[    0.224344] disp 5000000.disp: 5000000.disp supply vcc-lcd not found, using dummy regulator
[    0.224661] disp 5000000.disp: 5000000.disp supply vcc-pd not found, using dummy regulator
[    0.237387] [DISP] disp_sys_pwm_request,line:442:
[    0.237394] disp_sys_pwm_request pwm 8 fail! -517
[    0.237410] [DISP] disp_sys_pwm_config,line:509:
[    0.237413] disp_sys_pwm_Config, handle is NULL!
[    0.238086] display_fb_request,fb_id:0
[    0.257975] disp_al_manager_apply ouput_type:1
[    0.258121] [DISP] lcd_clk_config,line:731:
[    0.258135] disp 0, clk: pll(198000000),clk(198000000),dclk(33000000) dsi_rate(198000000)
[    0.258135]      clk real:pll(288000000),clk(288000000),dclk(48000000) dsi_rate(0)
[    0.258198] [DISP] disp_sys_gpio_request,line:276:
[    0.258206] disp_sys_gpio_request failed, gpio_name=lcd_bl_en, gpio=123, value=0, ret=-517
[    0.258222] [DISP] disp_sys_pwm_request,line:442:
[    0.258226] disp_sys_pwm_request pwm 8 fail! -517
[    0.258858] [DISP]disp_module_init finish
[    0.259824] sunxi_sid_init()506 - insmod ok
[    0.268249] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pe not found, using dummy regulator
[    0.268941] uart uart0: get regulator failed
[    0.268973] uart uart0: uart0 supply uart not found, using dummy regulator
[    0.269399] uart0: ttyS0 at MMIO 0x2500000 (irq = 18, base_baud = 1500000) is a SUNXI
[    0.269431] sw_console_setup()1808 - console setup baud 115200 parity n bits 8, flow n
[    1.062486] printk: console [ttyS0] enabled
[    1.068160] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pg not found, using dummy regulator
[    1.079722] uart uart1: get regulator failed
[    1.084618] uart uart1: uart1 supply uart not found, using dummy regulator
[    1.092728] uart1: ttyS1 at MMIO 0x2500400 (irq = 19, base_baud = 1500000) is a SUNXI
[    1.102441] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pb not found, using dummy regulator
[    1.113978] uart uart3: get regulator failed
[    1.118801] uart uart3: uart3 supply uart not found, using dummy regulator
[    1.126918] uart3: ttyS3 at MMIO 0x2500c00 (irq = 21, base_baud = 1500000) is a SUNXI
[    1.137014] misc dump reg init
[    1.141442] sunxi-rfkill soc@3000000:rfkill@0: module version: v1.0.9
[    1.148708] sunxi-rfkill soc@3000000:rfkill@0: devm_pinctrl_get() failed!
[    1.156391] sunxi-rfkill soc@3000000:rfkill@0: get gpio chip_en failed
[    1.163728] sunxi-rfkill soc@3000000:rfkill@0: get gpio power_en failed
[    1.171144] sunxi-rfkill soc@3000000:rfkill@0: wlan_busnum (1)
[    1.177728] sunxi-rfkill soc@3000000:rfkill@0: Missing wlan_power.
[    1.184705] sunxi-rfkill soc@3000000:rfkill@0: wlan_regon gpio=204 assert=1
[    1.192582] sunxi-rfkill soc@3000000:rfkill@0: wlan_hostwake gpio=202 assert=1
[    1.200787] sunxi-rfkill soc@3000000:rfkill@0: wakeup source is enabled
[    1.208481] sunxi-rfkill soc@3000000:rfkill@0: Missing bt_power.
[    1.215345] sunxi-rfkill soc@3000000:rfkill@0: bt_rst gpio=207 assert=0
[    1.223599] [ADDR_MGT] addr_mgt_probe: module version: v1.0.9
[    1.231220] [ADDR_MGT] addr_mgt_probe: success.
[    1.237914] libphy: Fixed MDIO Bus: probed
[    1.242489] CAN device driver interface
[    1.247233] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.254570] sunxi-ehci: EHCI SUNXI driver
[    1.259659] get ehci0-controller wakeup-source is fail.
[    1.265667] sunxi ehci0-controller don't init wakeup source
[    1.271924] [sunxi-ehci0]: probe, pdev->name: 4101000.ehci0-controller, sunxi_ehci: 0xffffffe000904290, 0x:ffffffd004078000, irq_no:2e
[    1.285485] [sunxi-ehci0]: Not init ehci0
[    1.290399] get ehci1-controller wakeup-source is fail.
[    1.296470] sunxi ehci1-controller don't init wakeup source
[    1.302752] [sunxi-ehci1]: probe, pdev->name: 4200000.ehci1-controller, sunxi_ehci: 0xffffffe000904650, 0x:ffffffd00407c000, irq_no:31
[    1.316345] hci: sunxi_insmod_ehci()600 WARN: get supply failed
[    1.322993] sunxi-ehci 4200000.ehci1-controller: EHCI Host Controller
[    1.330329] sunxi-ehci 4200000.ehci1-controller: new USB bus registered, assigned bus number 1
[    1.340274] sunxi-ehci 4200000.ehci1-controller: irq 49, io mem 0x04200000
[    1.373497] sunxi-ehci 4200000.ehci1-controller: USB 2.0 started, EHCI 1.00
[    1.382448] hub 1-0:1.0: USB hub found
[    1.386831] hub 1-0:1.0: 1 port detected
[    1.392166] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.399238] sunxi-ohci: OHCI SUNXI driver
[    1.404362] get ohci0-controller wakeup-source is fail.
[    1.410362] sunxi ohci0-controller don't init wakeup source
[    1.416641] [sunxi-ohci0]: probe, pdev->name: 4101400.ohci0-controller, sunxi_ohci: 0xffffffe000904dd0
[    1.427104] [sunxi-ohci0]: Not init ohci0
[    1.432016] get ohci1-controller wakeup-source is fail.
[    1.438036] sunxi ohci1-controller don't init wakeup source
[    1.444359] [sunxi-ohci1]: probe, pdev->name: 4200400.ohci1-controller, sunxi_ohci: 0xffffffe000905190
[    1.454844] hci: sunxi_insmod_ohci()265 WARN: get supply failed
[    1.461494] sunxi-ohci 4200400.ohci1-controller: OHCI Host Controller
[    1.468812] sunxi-ohci 4200400.ohci1-controller: new USB bus registered, assigned bus number 2
[    1.478705] sunxi-ohci 4200400.ohci1-controller: irq 50, io mem 0x04200400
[    1.558606] hub 2-0:1.0: USB hub found
[    1.562871] hub 2-0:1.0: 1 port detected
[    1.568653] usbcore: registered new interface driver uas
[    1.574865] usbcore: registered new interface driver usb-storage
[    1.581690] usbcore: registered new interface driver ums-alauda
[    1.588471] usbcore: registered new interface driver ums-cypress
[    1.595384] usbcore: registered new interface driver ums-datafab
[    1.602170] usbcore: registered new interface driver ums_eneub6250
[    1.609259] usbcore: registered new interface driver ums-freecom
[    1.616151] usbcore: registered new interface driver ums-isd200
[    1.622822] usbcore: registered new interface driver ums-jumpshot
[    1.629807] usbcore: registered new interface driver ums-karma
[    1.636444] usbcore: registered new interface driver ums-onetouch
[    1.643379] usbcore: registered new interface driver ums-realtek
[    1.650288] usbcore: registered new interface driver ums-sddr09
[    1.657033] usbcore: registered new interface driver ums-sddr55
[    1.663835] usbcore: registered new interface driver ums-usbat
[    1.670872] mousedev: PS/2 mouse device common for all mice
[    1.678020] ts probe start
[    1.678436] input: 2009c00.rtp as /devices/platform/soc@3000000/2009c00.rtp/input/input0
[    1.691139] ts probe success
[    1.691562] sunxi_gpadc_init,1968, success
[    1.700300] sunxi-rtc 7090000.rtc: errata__fix_alarm_day_reg_default_value(): ALARM0_DAY_REG=0, set it to 1
[    1.712720] sunxi-rtc 7090000.rtc: registered as rtc0
[    1.718592] sunxi-rtc 7090000.rtc: setting system clock to 1970-01-01T00:00:02 UTC (2)
[    1.727503] sunxi-rtc 7090000.rtc: sunxi rtc probed
[    1.733384] i2c /dev entries driver
[    1.737474] IR NEC protocol handler initialized
[    1.742564] IR RC5(x/sz) protocol handler initialized
[    1.748244] IR RC6 protocol handler initialized
[    1.753316] IR JVC protocol handler initialized
[    1.758397] IR Sony protocol handler initialized
[    1.763569] IR SANYO protocol handler initialized
[    1.768835] IR Sharp protocol handler initialized
[    1.774111] IR MCE Keyboard/mouse protocol handler initialized
[    1.780634] IR XMP protocol handler initialized
[    1.785717] ir_imon_decoder: IR iMON protocol handler initialized
[    1.792529] IR RCMM protocol handler initialized
[    1.798445] sunxi cedar version 1.1
[    1.802684] sunxi-cedar 1c0e000.ve: Adding to iommu group 0
[    1.808995] VE: install start!!!
[    1.808995]
[    1.814643] VE: cedar-ve the get irq is 6
[    1.814643]
[    1.821010] VE: ve_debug_proc_info:(____ptrval____), data:(____ptrval____), lock:(____ptrval____)
[    1.821010]
[    1.832665] VE: install end!!!
[    1.832665]
[    1.839328] sunxi-wdt 6011000.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    1.848580] Bluetooth: HCI UART driver ver 2.3
[    1.853595] Bluetooth: HCI UART protocol H4 registered
[    1.859360] Bluetooth: HCI UART protocol BCSP registered
[    1.865321] Bluetooth: XRadio Bluetooth LPM Mode Driver Ver 1.0.10
[    1.872677] [XR_BT_LPM] bluesleep_probe: bt_wake polarity: 1
[    1.879127] [XR_BT_LPM] bluesleep_probe: host_wake polarity: 1
[    1.885771] [XR_BT_LPM] bluesleep_probe: wakeup source is disabled!
[    1.885771]
[    1.894499] [XR_BT_LPM] bluesleep_probe: uart_index(1)
[    1.903644] sunxi-mmc 4020000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.19 2021-03-24 19:50)
[    1.913673] sunxi-mmc 4020000.sdmmc: ***ctl-spec-caps*** 8
[    1.919885] sunxi-mmc 4020000.sdmmc: No vmmc regulator found
[    1.926280] sunxi-mmc 4020000.sdmmc: No vqmmc regulator found
[    1.932691] sunxi-mmc 4020000.sdmmc: No vdmmc regulator found
[    1.939171] sunxi-mmc 4020000.sdmmc: No vd33sw regulator found
[    1.945709] sunxi-mmc 4020000.sdmmc: No vd18sw regulator found
[    1.952239] sunxi-mmc 4020000.sdmmc: No vq33sw regulator found
[    1.958780] sunxi-mmc 4020000.sdmmc: No vq18sw regulator found
[    1.965862] sunxi-mmc 4020000.sdmmc: Got CD GPIO
[    1.971352] sunxi-mmc 4020000.sdmmc: set cd-gpios as 24M fail
[    1.978122] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[    1.989335] sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator
[    2.009542] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.034038] sunxi-mmc 4020000.sdmmc: detmode:gpio irq
[    2.039714] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.052080] sunxi-mmc 4021000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.19 2021-03-24 19:50)
[    2.062171] sunxi-mmc 4021000.sdmmc: ***ctl-spec-caps*** 8
[    2.068571] sunxi-mmc 4021000.sdmmc: No vmmc regulator found
[    2.074970] sunxi-mmc 4021000.sdmmc: No vqmmc regulator found
[    2.081456] sunxi-mmc 4021000.sdmmc: No vdmmc regulator found
[    2.087951] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.099578] sunxi-mmc 4021000.sdmmc: No vd33sw regulator found
[    2.106124] sunxi-mmc 4021000.sdmmc: No vd18sw regulator found
[    2.112655] sunxi-mmc 4021000.sdmmc: No vq33sw regulator found
[    2.119306] sunxi-mmc 4021000.sdmmc: No vq18sw regulator found
[    2.125959] sunxi-mmc 4021000.sdmmc: Cann't get pin bias hs pinstate,check if needed
[    2.135506] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.147764] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.159017] sunxi-mmc 4021000.sdmmc: no vqmmc,Check if there is regulator
[    2.167969] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.179620] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.204028] sunxi-mmc 4021000.sdmmc: detmode:manually by software
[    2.211710] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
[    2.219396] usbcore: registered new interface driver usbhid
[    2.225658] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
[    2.232619] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.244265] usbhid: USB HID core driver
[    2.250510] usbcore: registered new interface driver snd-usb-audio
[    2.260729] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.272386] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.282535] [AUDIOCODEC][sunxi_codec_parse_params][2094]:digital_vol:0, lineout_vol:26, mic1gain:19, mic2gain:19 pa_msleep:120, pa_level:1, pa_pwr_level:1
[    2.282535]
[    2.299928] [AUDIOCODEC][sunxi_codec_parse_params][2130]:adcdrc_cfg:0, adchpf_cfg:1, dacdrc_cfg:0, dachpf:0
[    2.310925] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[    2.323063] [AUDIOCODEC][sunxi_internal_codec_probe][2266]:codec probe finished
[    2.331244] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    2.338216] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[    2.349875] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    2.357537] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    2.364598] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B
[    2.376258] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    2.383066] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[    2.394947] sid_rd_ver_reg()254 - ver >= 4, soc ver:5
[    2.400667] debugfs: Directory '203034c.dummy_cpudai' with parent 'audiocodec' already present!
[    2.410595] mmc0: new high speed SD card at address 0002
[    2.416749] [SNDCODEC][sunxi_card_init][583]:card init finished
[    2.425002] mmcblk0: mmc0:0002 N/A   1.86 GiB
[    2.434018] sunxi-codec-machine 2030340.sound: 2030000.codec <-> 203034c.dummy_cpudai mapping ok
[    2.445728]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[    2.451366] input: audiocodec sunxi Audio Jack as /devices/platform/soc@3000000/2030340.sound/sound/card0/input1
[    2.466779] [SNDCODEC][sunxi_card_dev_probe][832]:register card finished
[    2.475189] rpmsg_hifi 3003000.msgbox.sunxi,dsp-msgbox.514.258: id:sunxi,dsp-msgbox new channel: 0x202 -> 0x102!
[    2.486911] rpmsg_hifi 3003000.msgbox.sunxi,dsp-msgbox.514.258: rpmsg hifi[0] client driver is probed
[    2.499263] NET: Registered protocol family 10
[    2.505890] Segment Routing with IPv6
[    2.510206] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.517871] NET: Registered protocol family 17
[    2.522914] can: controller area network core (rev 20170425 abi 9)
[    2.530091] NET: Registered protocol family 29
[    2.535135] can: raw protocol (rev 20170425)
[    2.539933] can: broadcast manager protocol (rev 20170425 t)
[    2.546307] can: netlink gateway (rev 20190810) max_hops=1
[    2.552825] Bluetooth: RFCOMM TTY layer initialized
[    2.558436] Bluetooth: RFCOMM socket layer initialized
[    2.564316] Bluetooth: RFCOMM ver 1.11
[    2.569779] Loading compiled-in X.509 certificates
[    2.578211] HDMI 2.0 driver init start!
[    2.582506] boot_hdmi=false
[    2.585831] ERROR: pinctrl_get for HDMI2.0 DDC fail
[    2.592936] HDMI2.0 module init end
[    2.628902] twi twi2: twi2 supply twi not found, using dummy regulator
[    2.642497] sunxi_i2c_probe()2262 - [i2c2] probe success
[    2.655010] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.666873] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.674608] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.684359] clk: Not disabling unused clocks
[    2.689158] ALSA device list:
[    2.692468]   #0: audiocodec
[    2.695841] cfg80211: failed to load regulatory.db
[    2.701326] alloc_fd: slot 0 not NULL!
[    2.718764] EXT4-fs (mmcblk0p5): mounted filesystem without journal. Opts: (null)
[    2.727358] VFS: Mounted root (ext4 filesystem) readonly on device 179:5.
[    2.736028] devtmpfs: mounted
[    2.739593] Freeing unused kernel memory: 196K
[    2.744642] This architecture does not have kernel memory protection.
[    2.751862] Run /sbin/init as init process
[    2.758555] random: fast init done
[    2.895282] init: Console is alive
[    2.899425] init: - watchdog -
[    2.903018] init: - preinit -
[    3.173587] [SNDCODEC][sunxi_check_hs_detect_status][191]:plugin --> switch:1
formating /dev/by-name/UDISK to ext4
/etc/preinit: line 1: mkfs.ext4: not found
[    3.282389] mount_root: mounting /dev/root
[    3.287573] EXT4-fs (mmcblk0p5): re-mounted. Opts: (null)
[    3.294082] mount_root: loading kmods from internal overlay
[    3.408721] block: attempting to load /etc/config/fstab
[    3.417361] block: extroot: device not present, retrying in 5 seconds
[    3.685040] random: procd: uninitialized urandom read (4 bytes read)
[    6.183481] hdmi_hpd_sys_config_release
[    6.203483]
[    6.203483] insmod_device_driver
[    6.203483]
[    8.494277] block: extroot: cannot find device UDISK
[    8.514803] procd: - early -
[    8.518277] procd: - watchdog -
[    8.533012] random: procd: uninitialized urandom read (4 bytes read)
[    8.869571] procd: - watchdog -
[    8.883899] procd: - ubus -
[    8.887860] procd (1): /proc/114/oom_adj is deprecated, please use /proc/114/oom_score_adj instead.
[    8.912755] random: ubusd: uninitialized urandom read (4 bytes read)
[    8.943124] random: ubusd: uninitialized urandom read (4 bytes read)
[    8.991109] procd: - init -
Please press Enter to activate this console.
[   10.117253] fuse: init (API version 7.31)
[   10.464647] file system registered
[   10.604944] configfs-gadget 4100000.udc-controller: failed to start g1: -19
[   10.937802] read descriptors
[   10.941032] read strings
[   11.143694] sunxi_set_cur_vol_work()394 WARN: get power supply failed
[   11.234242] android_work: sent uevent USB_STATE=CONNECTED
[   11.240328] sunxi_set_cur_vol_work()394 WARN: get power supply failed
[   11.365671] configfs-gadget gadget: high-speed config #1: c
[   11.372084] android_work: sent uevent USB_STATE=CONFIGURED
[   16.397455] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   33.639037] RTL871X: module init start
[   33.643226] RTL871X: rtl8189fs v4.3.24.8_22657.20170607
[   33.649475] RTL871X: module init ret=0
[   47.068520] sunxi-rfkill soc@3000000:rfkill@0: bus_index: 1
[   47.084895] sunxi-rfkill soc@3000000:rfkill@0: wlan power on success
[   47.192068] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[   47.206986] sunxi-mmc 4021000.sdmmc: no vqmmc,Check if there is regulator
[   47.229279] get ctp_power is fail, -22
[   47.233610] get ctp_power_ldo_vol is fail, -22
[   47.238614] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[   47.250303] sunxi_ctp_startup: ctp_power_io is invalid.
[   47.256671] get ctp_gesture_wakeup fail, no gesture wakeup
[   47.262884] gt9xxnew_ts 2-0014: 2-0014 supply ctp not found, using dummy regulator
[   47.284752] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[   47.299489] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[   47.312844] sunxi-mmc 4021000.sdmmc: card claims to support voltages below defined range
[   47.331905] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[   47.343589] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[   47.355570] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B
[   47.368975] mmc1: new high speed SDIO card at address 0001
[   47.376198] RTL871X: CHIP TYPE: RTL8188F
[   47.381049] RTL871X: rtw_hal_config_rftype RF_Type is 3 TotalTxPath is 1
[   47.388705] RTL871X: Chip Version Info: CHIP_8188F_Normal_Chip_SMIC_B_CUT_1T1R_RomVer(0)
[   47.398036] RTL871X: SetHwReg8188F: hci_sus_state=1
[   47.405603] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=1
[   47.411042] RTL871X: SetHwReg8188F: hci_sus_state=2
[   47.416905] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
[   47.424371] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
[   47.433271] RTL871X: PowerOnCheck: 0x1B8 test Pass.
[   47.438919] RTL871X: EEPROM type is E-FUSE
[   47.444304] RTL871X: hal_EfuseSwitchToBank: Efuse switch bank to 0
[   47.483871] input: gt9xxnew_ts as /devices/virtual/input/input2
[   47.583818] xt_time: kernel timezone is -0000
[   47.614031] RTL871X: hal_ReadEFuse_WiFi: data end at address=0x98
[   47.633574] RTL871X: HW EFUSE
[   47.636889] RTL871X: 0x000:
[   47.636893] 29
[   47.640097] 81
[   47.642041] 03
[   47.673656] CC
[   47.675611] 00
[   47.677556] 00
[   47.679536] 50
[   47.681481] 00
[   47.683424] 00
[   47.700132] 00
[   47.707829] 04
[   47.711022] CC
[   47.717240] 0A
[   47.719194] 0C
[   47.721139] 00
[   47.723083] 00
[   47.738623] RTL871X: 0x010:
[   47.738630] 2A
[   47.741844] 2A
[   47.745287] 2A
[   47.753624] 2A
[   47.755579] 2A
[   47.757523] 2A
[   47.759502] 2D
[   47.761449] 2D
[   47.763393] 2D
[   47.773560] 2D
[   47.775516] 2D
[   47.777459] 03
[   47.779403] FF
[   47.781345] FF
[   47.783323] FF
[   47.790853] FF
[   47.795499] RTL871X: 0x020:
[   47.795505] FF
[   47.803558] FF
[   47.805549] FF
[   47.807496] FF
[   47.809440] FF
[   47.811384] FF
[   47.813328] FF
[   47.828348] FF
[   47.830303] FF
[   47.832538] FF
[   47.842267] FF
[   47.844370] FF
[   47.846319] FF
[   47.848261] FF
[   47.850205] FF
[   47.852188] FF
[   47.866169] RTL871X: 0x030:
[   47.866177] FF
[   47.869390] FF
[   47.871335] FF
[   47.873279] FF
[   47.885729] FF
[   47.887684] FF
[   47.889628] FF
[   47.891573] FF
[   47.895778] FF
[   47.903630] FF
[   47.905584] FF
[   47.907528] FF
[   47.909510] FF
[   47.911454] FF
[   47.913398] FF
[   47.925619] FF
[   47.929418] RTL871X: 0x040:
[   47.929420] FF
[   47.932659] FF
[   47.938135] FF
[   47.942488] FF
[   47.952864] FF
[   47.955003] FF
[   47.956954] FF
[   47.958897] FF
[   47.960832] FF
[   47.963066] FF
[   47.973574] FF
[   47.975529] FF
[   47.977473] FF
[   47.979454] FF
[   47.981400] FF
[   47.983345] FF
[   47.993595] RTL871X: 0x050:
[   47.993602] FF
[   47.996816] FF
[   47.998759] FF
[   48.000703] FF
[   48.002682] FF
[   48.010863] FF
[   48.015146] FF
[   48.017100] FF
[   48.019045] FF
[   48.021279] FF
[   48.023224] FF
[   48.036011] FF
[   48.037964] FF
[   48.039908] FF
[   48.041852] FF
[   48.051147] FF
[   48.056627] RTL871X: 0x060:
[   48.056635] FF
[   48.062553] FF
[   48.067059] FF
[   48.069014] FF
[   48.070992] FF
[   48.072939] FF
[   48.085651] FF
[   48.093566] FF
[   48.095520] FF
[   48.097755] FF
[   48.099690] FF
[   48.101634] FF
[   48.142822] FF
[   48.153581] FF
[   48.155537] FF
[   48.157480] FF
[   48.161269] RTL871X: 0x070:
[   48.161271] FF
[   48.186590] FF
[   48.188545] FF
[   48.203586] FF
[   48.205541] FF
[   48.207484] FF
[   48.209463] FF
[   48.211409] FF
[   48.213351] FF
[   48.253625] FF
[   48.255615] FF
[   48.257561] FF
[   48.259505] FF
[   48.261447] FF
[   48.263391] FF
[   48.282048] FF
[   48.290261] RTL871X: 0x080:
[   48.290268] FF
[   48.293680] FF
[   48.297105] FF
[   48.299059] FF
[   48.310530] FF
[   48.312484] FF
[   48.325832] FF
[   48.327788] FF
[   48.329732] FF
[   48.331968] FF
[   48.353552] FF
[   48.355507] FF
[   48.357451] FF
[   48.359429] FF
[   48.361376] FF
[   48.363320] FF
[   48.387743] RTL871X: 0x090:
[   48.387749] FF
[   48.390962] FF
[   48.392906] FF
[   48.410983] FF
[   48.413044] FF
[   48.423594] FF
[   48.425548] FF
[   48.427493] FF
[   48.429474] FF
[   48.431711] FF
[   48.453549] FF
[   48.455504] FF
[   48.457448] FF
[   48.459392] FF
[   48.461335] FF
[   48.463315] FF
[   48.477368] RTL871X: 0x0a0:
[   48.477374] FF
[   48.485013] FF
[   48.489303] FF
[   48.491257] FF
[   48.494856] FF
[   48.503914] FF
[   48.505868] FF
[   48.507813] FF
[   48.511279] FF
[   48.520802] FF
[   48.522756] FF
[   48.524811] FF
[   48.528391] FF
[   48.530345] FF
[   48.537763] FF
[   48.539718] FF
[   48.548406] RTL871X: 0x0b0:
[   48.548413] FF
[   48.556888] FF
[   48.558841] FF
[   48.560786] FF
[   48.568178] FF
[   48.570134] FF
[   48.572078] FF
[   48.580070] FF
[   48.582024] 20
[   48.591002] 25
[   48.592957] 1A
[   48.598435] 00
[   48.600389] 00
[   48.608610] 00
[   48.610565] 00
[   48.612576] FF
[   48.619565] RTL871X: 0x0c0:
[   48.619572] FF
[   48.628059] 11
[   48.630014] 00
[   48.631957] 10
[   48.640370] 00
[   48.642324] FF
[   48.650623] 00
[   48.652578] FF
[   48.656608] 00
[   48.658918] 00
[   48.666328] FF
[   48.668283] FF
[   48.670293] FF
[   48.678528] FF
[   48.680484] FF
[   48.682464] FF
[   48.691585] RTL871X: 0x0d0:
[   48.691591] 3E
[   48.699371] 10
[   48.701327] 01
[   48.708509] 12
[   48.713254] 23
[   48.724714] FF
[   48.733698] FF
[   48.735653] FF
[   48.743584] 20
[   48.745829] 04
[   48.747772] 4C
[   48.763577] 02
[   48.770757] 79
[   48.772712] F1
[   48.783354] 21
[   48.793559] 02
[   48.801176] RTL871X: 0x0e0:
[   48.801183] 0C
[   48.813561] 00
[   48.815594] 22
[   48.817544] 04
[   48.819488] 00
[   48.832986] 08
[   48.846306] 00
[   48.853629] 32
[   48.855620] FF
[   48.857857] 21
[   48.875374] 02
[   48.877415] 0C
[   48.879396] 00
[   48.893605] 22
[   48.895559] 2A
[   48.908219] 01
[   48.912019] RTL871X: 0x0f0:
[   48.912021] 01
[   48.920525] 00
[   48.922478] 00
[   48.926676] 00
[   48.930691] 00
[   48.938284] 00
[   48.940238] 00
[   48.944812] 00
[   48.947147] 00
[   48.950502] 00
[   48.952457] 00
[   48.959856] 00
[   48.961811] 02
[   48.965227] 00
[   48.967180] FF
[   48.969125] FF
[   48.983568] RTL871X: 0x100:
[   48.983647] 00
[   48.986860] 00
[   48.990668] 00
[   48.992621] 00
[   49.000101] 00
[   49.002056] 00
[   49.007071] 00
[   49.012655] 00
[   49.017787] 00
[   49.020031] 00
[   49.021976] 00
[   49.028951] 00
[   49.032845] 00
[   49.036318] 00
[   49.038271] 00
[   49.040251] 00
[   49.059572] RTL871X: 0x110:
[   49.059579] 00
[   49.062856] EB
[   49.070250] 00
[   49.072203] 6E
[   49.075091] 01
[   49.077135] 00
[   49.079082] 00
[   49.081027] 00
[   49.091275] 00
[   49.094358] FF
[   49.096312] 94
[   49.098295] A4
[   49.108895] 08
[   49.113066] C5
[   49.116079] 12
[   49.118032] 65
[   49.127057] RTL871X: 0x120:
[   49.127063] FF
[   49.130278] FF
[   49.140277] FF
[   49.148877] FF
[   49.150831] FF
[   49.152776] FF
[   49.163628] FF
[   49.171513] FF
[   49.178136] FF
[   49.191577] FF
[   49.202072] FF
[   49.207205] FF
[   49.209157] FF
[   49.211102] FF
[   49.233551] FF
[   49.242718] FF
[   49.253564] RTL871X: 0x130:
[   49.253571] FF
[   49.256784] FF
[   49.279696] FF
[   49.281651] FF
[   49.290480] FF
[   49.292435] FF
[   49.306887] FF
[   49.311541] FF
[   49.316947] FF
[   49.325773] FF
[   49.331684] FF
[   49.338982] FF
[   49.341324] FF
[   49.349836] FF
[   49.358768] FF
[   49.361934] FF
[   49.368639] RTL871X: 0x140:
[   49.368646] FF
[   49.372269] FF
[   49.379529] FF
[   49.386072] FF
[   49.391057] FF
[   49.403685] FF
[   49.416061] FF
[   49.418016] FF
[   49.419961] FF
[   49.443026] FF
[   49.453548] FF
[   49.455541] FF
[   49.457487] FF
[   49.476209] FF
[   49.483562] FF
[   49.493604] FF
[   49.512948] RTL871X: 0x150:
[   49.512954] FF
[   49.523617] FF
[   49.525608] FF
[   49.527553] FF
[   49.555457] FF
[   49.557411] FF
[   49.559401] FF
[   49.582190] FF
[   49.585570] FF
[   49.593555] FF
[   49.595508] FF
[   49.597452] FF
[   49.625773] FF
[   49.633574] FF
[   49.635528] FF
[   49.653142] FF
[   49.661134] RTL871X: 0x160:
[   49.661141] FF
[   49.670404] FF
[   49.673558] FF
[   49.696461] FF
[   49.698453] FF
[   49.700398] FF
[   49.733442] FF
[   49.735503] FF
[   49.737448] FF
[   49.762875] FF
[   49.774502] FF
[   49.783564] FF
[   49.785518] FF
[   49.799400] FF
[   49.801419] FF
[   49.819175] FF
[   49.822973] RTL871X: 0x170:
[   49.822975] FF
[   49.841961] FF
[   49.847063] FF
[   49.849055] FF
[   49.851002] FF
[   49.866140] FF
[   49.868095] FF
[   49.875437] FF
[   49.877393] FF
[   49.879628] FF
[   49.902180] FF
[   49.909170] FF
[   49.911126] FF
[   49.933565] FF
[   49.941251] FF
[   49.943207] FF
[   49.962567] RTL871X: 0x180:
[   49.962573] FF
[   49.977028] FF
[   49.990488] FF
[   49.992443] FF
[   50.007252] FF
[   50.009271] FF
[   50.023567] FF
[   50.025521] FF
[   50.043888] FF
[   50.048804] FF
[   50.050758] FF
[   50.052703] FF
[   50.083654] FF
[   50.085609] FF
[   50.103214] FF
[   50.108340] FF
[   50.112140] RTL871X: 0x190:
[   50.112142] FF
[   50.141273] FF
[   50.150859] FF
[   50.152814] FF
[   50.163640] FF
[   50.173587] FF
[   50.175541] FF
[   50.182710] FF
[   50.187845] FF
[   50.190091] FF
[   50.192035] FF
[   50.209686] FF
[   50.211641] FF
[   50.223641] FF
[   50.230885] FF
[   50.232839] FF
[   50.262179] RTL871X: 0x1a0:
[   50.262187] FF
[   50.276677] FF
[   50.286602] FF
[   50.288557] FF
[   50.290502] FF
[   50.339184] FF
[   50.341139] FF
[   50.343084] FF
[   50.378588] FF
[   50.380834] FF
[   50.413554] FF
[   50.425874] FF
[   50.427828] FF
[   50.429772] FF
[   50.466046] FF
[   50.483984] FF
[   50.508738] RTL871X: 0x1b0:
[   50.508744] FF
[   50.511958] FF
[   50.534849] FF
[   50.536804] FF
[   50.538749] FF
[   50.576967] FF
[   50.578922] FF
[   50.580867] FF
[   50.609079] FF
[   50.611324] FF
[   50.613269] FF
[   50.661562] FF
[   50.673101] FF
[   50.694773] FF
[   50.715551] FF
[   50.756191] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
[   50.765723] FF
[   50.767580] RTL871X: 0x1c0:
[   50.767583] FF
Trying to connect to SWUpdate...[   50.806408] FF

[   50.829238] FF
[   50.832591] FF
[   50.882080] FF
[   50.919546] FF
[   50.933542] FF
[   50.935496] FF
[   50.974786] FF
[   50.977031] FF
[   51.002264] FF
[   51.020739] FF
[   51.022693] FF
[   51.071160] FF
[   51.073367] FF
[   51.111137] FF
[   51.136503] RTL871X: 0x1d0:
[   51.136510] FF
[   51.139789] FF
[   51.187972] FF
[   51.189926] FF
[   51.205992] FF
[   51.218640] FF
[   51.220662] FF
[   51.222609] FF
[   51.241975] FF
[   51.260207] FF
[   51.263104] FF
[   51.273712] FF
[   51.275667] FF
[   51.277612] FF
[   51.293561] FF
[   51.295516] FF
[   51.314351] RTL871X: 0x1e0:
[   51.314357] FF
[   51.337135] FF
[   51.346667] FF
[   51.349666] FF
[   51.351621] FF
[   51.367045] FF
[   51.369000] FF
[   51.377600] FF
[   51.379556] FF
[   51.395979] FF
[   51.402447] FF
[   51.412654] FF
[   51.414845] FF
[   51.416863] FF
[   51.418809] FF
[   51.428014] FF
[   51.437267] RTL871X: 0x1f0:
[   51.437273] FF
[   51.440524] FF
[   51.450047] FF
[   51.452039] FF
[   51.466478] FF
[   51.468433] FF
[   51.470376] FF
[   51.472938] FF
[   51.477399] FF
[   51.487090] FF
[   51.489045] FF
[   51.490989] FF
[   51.497352] FF
[   51.500525] FF
[   51.502479] FF
[   51.513556] FF
[   51.517353]
[   51.528569] RTL871X: hal_com_config_channel_plan chplan:0x20
[   51.574453] RTL871X: kfree flag:1
[   51.590110] RTL871X: bb_gain:-1
[   51.609258] RTL871X: rtl8188f_FirmwareDownload((null)) tmp_ps=3
[   51.631597] RTL871X: rtl8188f_FirmwareDownload fw: FW_NIC, size: 21020
[   51.658102] RTL871X: rtl8188f_FirmwareDownload: fw_ver=4 fw_subver=0000 sig=0x88f1, Month=08, Date=22, Hour=17, Minute=36
[   51.698071] RTL871X: rtl8188f_FirmwareDownload(): Shift for fw header!
[   51.733643] RTL871X: rtl8188f_FirmwareDownload by IO write!
[   52.099997] random: crng init done
[   52.103799] random: 6 urandom warning(s) missed due to ratelimiting
[   52.233170] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x07050105
[   52.247012] RTL871X: _8051Reset8188: Finish
[   52.260583] RTL871X: _FWFreeToGo: Polling FW ready OK! (88, 20ms), REG_MCUFWDL:0x070501c6
[   52.273673] RTL871X: rtl8188f_FirmwareDownload: DLFW OK !
[   52.279777] RTL871X: rtl8188f_FirmwareDownload success. write_fw:1, 540ms
[   52.290759] RTL871X:  <=== rtl8188f_FirmwareDownload()
[   52.297212] RTL871X: hal_read_mac_hidden_rpt OK! (1, 0ms), fwdl:1, id:0x19
[   52.309457] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=0
[   52.315039] RTL871X: SetHwReg8188F: hci_sus_state=3
[   52.321666] RTL871X: SetHwReg8188F: hci_sus_state=0
[   52.329862] RTL871X: rtw_hal_read_chip_info in 4930 ms
[   52.336099] RTL871X: init_channel_set((null)) ChannelPlan ID:0x20, ch num:13
[   52.353335] RTL871X: rtw_alloc_macid((null)) if1, hwaddr:ff:ff:ff:ff:ff:ff macid:1
[   52.372386] RTL871X: Init_ODM_ComInfo_8188f(): fab_ver=0 cut_ver=1
[   52.406031] RTL871X: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1
[   52.457875] RTL871X: phy_ConfigBBWithPgParaFile(): No File PHY_REG_PG.txt, Load from HWImg Array!
[   52.480548] RTL871X: default power by rate loaded
[   52.492385] RTL871X: rtw_macaddr_cfg mac addr:94:a4:08:c5:12:65
[   52.512064] RTL871X: bDriverStopped:True, bSurpriseRemoved:False, bup:0, hw_init_completed:0
[   52.535398] RTL871X: rtw_wiphy_alloc(phy0)
[   52.551979] RTL871X: rtw_wdev_alloc(padapter=00000000d5fe995c)
[   52.568929] RTL871X: rtw_wiphy_register(phy0)
[   52.577931] RTL871X: Register RTW cfg80211 vendor cmd(0x67) interface
[   52.593682] RTL871X: _rtw_reg_notifier
[   52.597953] RTL871X: _rtw_reg_notifier_apply: NL80211_REGDOM_SET_BY_CORE to DRV
[   52.610417] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=94:a4:08:c5:12:65
[   52.622198] RTL871X: cfg80211_rtw_get_txpower
[   63.293066] RTL871X: cfg80211_rtw_get_txpower
[   63.298627] RTL871X: cfg80211_rtw_get_txpower
[   63.304426] RTL871X: cfg80211_rtw_get_txpower
[   63.309675] RTL871X: cfg80211_rtw_get_txpower
[   63.317605] RTL871X: cfg80211_rtw_get_txpower
[   63.322844] RTL871X: +871x_drv - drv_open, bup=0
[   63.328610] RTL871X: FW does not exist before power on!!
[   63.335639] RTL871X: SetHwReg8188F: hci_sus_state=1
[   63.343267] RTL871X: SetHwReg8188F: bMacPwrCtrlOn=1
[   63.351824] RTL871X: SetHwReg8188F: hci_sus_state=2
[   63.363956] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
[   63.381736] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
[   63.394795] RTL871X: PowerOnCheck: 0x1B8 test Pass.
[   63.403639] RTL871X: Power on ok!
[   63.412914] RTL871X: rtl8188f_FirmwareDownload(wlan0) tmp_ps=3
[   63.424699] RTL871X: rtl8188f_FirmwareDownload fw: FW_NIC, size: 21020
[   63.441927] RTL871X: rtl8188f_FirmwareDownload: fw_ver=4 fw_subver=0000 sig=0x88f1, Month=08, Date=22, Hour=17, Minute=36
[   63.457354] RTL871X: rtl8188f_FirmwareDownload(): Shift for fw header!
[   63.473630] RTL871X: rtl8188f_FirmwareDownload by IO write!
[   63.733256] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00050105
[   63.744024] RTL871X: _8051Reset8188: Finish
[   63.757606] RTL871X: _FWFreeToGo: Polling FW ready OK! (85, 10ms), REG_MCUFWDL:0x000501c6
[   63.767097] RTL871X: rtl8188f_FirmwareDownload: DLFW OK !
[   63.773392] RTL871X: rtl8188f_FirmwareDownload success. write_fw:1, 290ms
[   63.781358] RTL871X:  <=== rtl8188f_FirmwareDownload()
[   63.787263] RTL871X: HalDetectPwrDownMode(): PDN=0
[   63.792792] RTL871X: Set RF Chip ID to RF_6052 and RF type to 3.
[   64.355542] RTL871X: #### hw_var_set_opmode() -4815 iface_type(0) mode = 2 ####
[   64.364379] RTL871X: rtw_rf_get_kfree_tx_gain_offset path:0, ch:6, bb_gain_sel:0, kfree_offset:-1
[   64.375043] RTL871X: kfree gain_offset 0x55:0x82060
[   64.375965] RTL871X:  after :0x6050
[   64.385745] RTL871X: MAC Address = 94:a4:08:c5:12:65
[   64.392123] RTL871X: rtw_cfg80211_init_wiphy:rf_type=3
[   64.398443] RTL871X: start rtl8188fs_xmit_thread(wlan0)
[   64.404408] RTL871X: [HT] HAL Support STBC = 0x01
[   64.409931] RTL871X: -871x_drv - drv_open, bup=1
[   64.415666] RTL871X: cfg80211_rtw_set_power_mgmt(wlan0) enabled:1, timeout:-1
[   64.455109] RTL871X: cfg80211_rtw_flush_pmksa(wlan0)
[   64.513918] RTL871X: cfg80211_rtw_get_txpower
[   64.523822] RTL871X: (2)871x_drv - drv_close, bup=1, hw_init_completed=_TRUE
[   64.537694] RTL871X: -871x_drv - drv_close, bup=1



BusyBox v1.27.2 () built-in shell (ash)

 _____  _              __     _
|_   _||_| ___  _ _   |  |   |_| ___  _ _  _ _
  | |   _ |   ||   |  |  |__ | ||   || | ||_'_|
  | |  | || | || _ |  |_____||_||_|_||___||_,_|
  |_|  |_||_|_||_|_|  Tina is Based on OpenWrt!
 ----------------------------------------------
 Tina Linux (Neptune, 5C1C9C53)
 ----------------------------------------------
root@TinaLinux:/#
root@TinaLinux:/#
root@TinaLinux:/#
root@TinaLinux:/#
root@TinaLinux:/# mount
/dev/root on / type ext4 (ro,noatime)
devtmpfs on /dev type devtmpfs (rw,relatime,size=21096k,nr_inodes=5274,mode=755)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600,ptmxmode=000)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
none on /sys/kernel/config type configfs (rw,relatime)
adb on /dev/usb-ffs/adb type functionfs (rw,relatime)
/dev/mmcblk0p1 on /mnt/SDCARD type vfat (rw,relatime,fmask=0000,dmask=0000,allow_utime=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
root@TinaLinux:/#
root@TinaLinux:/#
root@TinaLinux:/# lsmod
8189fs               2324263  0
8723ds               2386937  0
fuse                  152450  0
gt9xxnew_ts            69396  0
ipt_REJECT              2647  0
iptable_filter          1759  0
xt_LOG                  1639  0
xt_TCPMSS               4060  0
xt_comment              1156  0
xt_limit                2725  0
xt_mac                  1338  0
xt_mark                 1472  0
xt_multiport            2489  0
xt_time                 3573  0
root@TinaLinux:/#
root@TinaLinux:/# ifconfig -a
lo        Link encap:Local Loopback
          LOOPBACK  MTU:65536  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

sit0      Link encap:IPv6-in-IPv4
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan0     Link encap:Ethernet  HWaddr 94:A4:08:C5:12:65
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

root@TinaLinux:/#

WIFI 可以用了。

颜色问题找到了，linux设备树 board.dts dmic数字麦克风把显示的信号线占了，disabled就好了。

@wuzhujian 在 芒果派麻雀到手试玩 中说：

@memory 只建个空目录，应该是没有用的吧？

5寸800x480，4.3寸480x272补丁： 芒果派麻雀固件与源码补丁2021-12-16.7z

LCD颜色貌似还有问题？

TF卡不能读写的问题，请执行：

mount -o remount -o rw /dev/root

@wuzhujian 在 芒果派麻雀到手试玩 中说：

@memory
我的屏是480x272的电阻屏，补丁上用的800x480的，是不是合适？
要不，改个480x270的放出来？

嗯，已经准备采购4.3寸屏，开始新建文件夹了：

mkdir target/allwinner/d1-mangopi_mq_rgb480x272_rtp

搜索关键词 buildroot 会发现新知识。

顺便看下韦东山老师这个链接：

【极简操作】使用builroot 2021一键编译生成D1 nezha 系统镜像！
https://bbs.aw-ol.com/topic/171

用热熔胶给小麻雀做套衣裳。

固件与源码下载： 芒果派麻雀固件与源码补丁2021-12-14.7z

串口是UART0 PE2 PE3。

readme 里面缺了一步 lunch

因为什么没有优化也没有，所以开机时间挺久。lvgl demo要等gt911触摸驱动就绪，故意延迟了6秒。

右下角 UART3 PB6/PB7(G / T3 / R3) 可以作为默认的串口输出。

kill已经运行的lvgl_demo，手动运行TF固件自带的 lv_examples 2。

烧个一楼的固件到TF卡上电试一试。

徒手抓了5只带WIFI的麻雀。

麻雀购买链接： https://item.taobao.com/item.htm?id=638644511420
麻雀购买链接： https://item.taobao.com/item.htm?id=638644511420
麻雀购买链接： https://item.taobao.com/item.htm?id=638644511420

D1s Datasheet 1.0

D1s Manual 1.0

PDF原理图： MQ_SCH_v1.5_量产版_带网络.pdf

BOM表（秀！）：
https://mangopi.org/_media/zh/mq_v1.5_bom.html

SDK修改方法与固件下载（非官方玩法）：

简单修改 哪吒d1 tina sdk 的 sys_config.fex 和 board.dts，让D1s先把Linux跑起来。
https://bbs.aw-ol.com/topic/384/share/2

蓝牙一般走 UART / USB， 和主控芯片几乎没有关系。

[      0.402]

U-Boot 2011.09-rc1-00000-geb34904-dirty (Nov 28 2021 - 17:50:12) Allwinner Technology

[      0.411]version: 1.1.0
[      0.414]uboot commit : eb3490458843de28cd4abb59d2013438b3d0f101

ready
set power on vol to default
no battery, limit to dc
no key input
dram_para_set start
dram_para_set end
In:    Out:   Err:   Net:   Warning: failed to set MAC address


read boot or recovery all
   Verifying Checksum ... OK
OK
OK
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Linux version 3.4.39 (whycan@ubuntu) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #122 Mon Dec 13 22:28:18 CST 2021
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: sun8i
[    0.000000] ion_reserve_common: ion reserve: [0x45c00000, 0x48000000]!
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat c0702414, node_mem_map c073f000
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32512 pages, LIFO batch:7
[    0.000000] script_init enter!
[    0.000000] script_init exit!
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/nandd loglevel=8
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 128MB = 128MB total
[    0.000000] Memory: 85452k/85452k available, 45620k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xc8800000 - 0xff000000   ( 872 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0680000   (6624 kB)
[    0.000000]       .init : 0xc0680000 - 0xc06aa000   ( 168 kB)
[    0.000000]       .data : 0xc06aa000 - 0xc0702b60   ( 355 kB)
[    0.000000]        .bss : 0xc0702b84 - 0xc073e56c   ( 239 kB)
[    0.000000] NR_IRQS:544
[    0.000000] 524 ahb1 set parent pll_periph0d2
[    0.000000] Architected local timer running at 24.00MHz.
[    0.000000] Switching to timer-based delay loop
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] Console: colour dummy device 80x30
[    0.000269] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
[    0.000321] pid_max: default: 32768 minimum: 301
[    0.000586] Mount-cache hash table entries: 512
[    0.001452] CPU: Testing write buffer coherency: ok
[    0.001799] Setting up static identity map for 0x404d2aa8 - 0x404d2b00
[    0.002830] devtmpfs: initialized
[    0.005857] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.006224] pinctrl core: initialized pinctrl subsystem
[    0.007079] NET: Registered protocol family 16
[    0.007562] DMA: preallocated 128 KiB pool for atomic coherent allocations
[    0.007654] script_sysfs_init success
[    0.007728] sunxi_dump_init success
[    0.009258] gpiochip_add: registered GPIOs 0 to 223 on device: sunxi-pinctrl
[    0.011114] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
[    0.012396] tsc2003 device registered
[    0.012993] [sunxi-module]: [sunxi-module.0] probe success
[    0.013079] script config pll_isp to 360 Mhz
[    0.013130] Not Found clk pll_video in script
[    0.013162] script config pll_ve to 360 Mhz
[    0.013203] Not Found clk pll_periph0 in script
[    0.013225] Not Found clk pll_de in script
[    0.013240] sunxi_default_clk_init
[    0.013259] try to set pll6ahb1 to 200000000
[    0.013283] Error not get clk pll6ahb1
[    0.013310] Error not get clk pll6ahb1try to set ahb1 to 200000000
[    0.013353] try to set apb1 to 100000000
[    0.013742] ===fe3o4==== sunxi_root_procfs_attach ret:0
[    0.026983] bio: create slab <bio-0> at 0
[    0.027410] pwm module init!
[    0.030471] ion_mem.size = 37748736
[    0.031493] SCSI subsystem initialized
[    0.031962] usbcore: registered new interface driver usbfs
[    0.032120] usbcore: registered new interface driver hub
[    0.032355] usbcore: registered new device driver usb
[    0.032614] twi_chan_cfg()341 - [twi0] has no twi_speed!
[    0.032640] twi_chan_cfg()352 - [twi0] has no twi_regulator.
[    0.032667] twi_chan_cfg()341 - [twi1] has no twi_speed!
[    0.032690] twi_chan_cfg()352 - [twi1] has no twi_regulator.
[    0.033629] Linux video capture interface: v2.00
[    0.034054] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.035689] cfg80211: Calling CRDA to update world regulatory domain
[    0.037887] Switching to clocksource arch_sys_counter
[    0.049239] NET: Registered protocol family 2
[    0.049731] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.050679] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.050864] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.050964] TCP: Hash tables configured (established 4096 bind 4096)
[    0.050988] TCP: reno registered
[    0.051014] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.051062] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.051577] NET: Registered protocol family 1
[    0.052139] RPC: Registered named UNIX socket transport module.
[    0.052167] RPC: Registered udp transport module.
[    0.052186] RPC: Registered tcp transport module.
[    0.052204] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.052540] [pm]aw_pm_init!
[    0.052567] standby_mode = 1.
[    0.052583] wakeup src cnt is : 3.
[    0.052681] sunxi_reg_init enter
[    0.055273] VFS: Disk quotas dquot_6.5.2
[    0.055391] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.056175] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.056777] NTFS driver 2.1.30 [Flags: R/W].
[    0.056962] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.057399] msgmni has been set to 166
[    0.059793] io scheduler noop registered
[    0.059820] io scheduler deadline registered
[    0.059966] io scheduler cfq registered (default)
[    0.059993] [DISP]disp_module_init
[    0.060878] cmdline,disp=
[    0.061914] rotation_sw module is config as no used
[    0.061970] [DISP] disp_get_rotation_sw,line:78:disp 0 out of range? g_rot_sw=0
[    0.062004] [DISP] disp_init_connections,line:289:NULL pointer: 0, 0
[    0.062168] fb_para.width = 240,fb_para.height = 240,fb_para.buffer_num = 2
[    0.063060] info->var.bits_per_pixel = 32
[    0.063087] [DISP] Fb_map_kernel_logo,line:924:Fb_map_kernel_logo failed!LCD_power_on 88 ..........
[    0.067242] LCD_power_on 89 ++++++++++++++++++++++++
[    0.068739] [DISP]disp_module_init finish
[    0.069212] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator.
[    0.069250] sw_uart_get_devinfo()1503 - uart1 has no uart_regulator.
[    0.069282] sw_uart_get_devinfo()1503 - uart2 has no uart_regulator.
[    0.070351] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
[    0.070383] sw_uart_pm()890 - uart0 clk is already enable
[    0.070422] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
[    0.263987] LCD_panel_init 122 ..........
[    0.803708] LCD_panel_init 123 ++++++++++++++++++++++++
[    0.809666] lcd_panel_st7789s_init 183 ++++++++++++++++++++++++
[    0.816432] [DISP] disp_sys_gpio_set_value,line:374:OSAL_GPIO_DevWRITE_ONEPIN_DATA, hdl is NULL
[    0.826239] console [ttyS0] enabled
[    0.830876] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
[    0.838139] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
[    0.846627] [rf_pm]: failed to fetch wifi configuration!
[    0.852691] sunxi-rf-pm: probe of sunxi-rf-pm.0 failed with error -1
[    0.859882] [wifi_pm]: get wl_reg_on gpio failed
[    0.865369] [wifi_pm]: wifi gpio init is OK !!
[    0.870459] [rfkill]: init no bt used in configuration
[    0.877356] spinand type err! 0[NAND]nand init start, spinand_used_flag is -1066850196
[    0.886318] spinand_cache_level err! 0spinand_capacity_level err! 0
[    0.893378] NandHwInit: Start Nand Hardware initializing .....
[    0.899920] kernel:nand version: 2 25 20150917 1145
[    0.905541] pin count:4
[    0.908443] request tx DMA
[    0.911508] request general tx dma channel ok!
[    0.916489] request rx DMA
[    0.919521] request general rx dma channel ok!
[    0.924566] NAND_ClkRequest: get pll6 rate 600000000HZ
[    0.930404] SPI nand ID: 12c212c2 12c212c2
[    0.935019] [SCAN_DBG] NandTwoPlaneOp: 1, DriverTwoPlaneOPCfg: 1, 0xffcfffff
[    0.943049] spinand, spinand_id_number_ctl, nand type err! 0
[    0.949395] _UpdateExtAccessFreqPara: no para.
[    0.954679] [DISP] disp_sys_gpio_set_value,line:374:OSAL_GPIO_DevWRITE_ONEPIN_DATA, hdl is NULL
[    0.964543] PHY_Scan_DelayMode: right delay mode 0x0
[    0.970524] PHY_Scan_DelayMode: right delay mode 0x800
[    0.976321] PHY_Scan_DelayMode: right delay mode,clk 75 MHz, bit[13]=0,bit[11]=1
[    0.984950] _GetOldPhysicArch: chip 0, block 20, page 0, oob: 0x0, 0x50, 0x48, 0x59
[    0.993566] _GetOldPhysicArch: get old physic arch ok, 0x6d 0x2!
[    1.000335] NAND_ReadPhyArch: get old physic arch ok, use old cfg, now:0x2 0x6d - old:0x2 0x6d!
[    1.010103]
[    1.010110]
[    1.013435] [SCAN_DBG] ==============Nand Architecture Parameter==============
[    1.021552] [SCAN_DBG]    Nand Chip ID:         0xffff12c2 0xffffffff
[    1.028774] [SCAN_DBG]    Nand Chip Count:      0x1
[    1.034257] [SCAN_DBG]    Nand Chip Connect:    0x1
[    1.039725] [SCAN_DBG]    Sector Count Of Page: 0x4
[    1.045218] [SCAN_DBG]    Page Count Of Block:  0x40
[    1.050801] [SCAN_DBG]    Block Count Of Die:   0x400
[    1.056463] [SCAN_DBG]    Plane Count Of Die:   0x2
[    1.061946] [SCAN_DBG]    Die Count Of Chip:    0x1
[    1.067414] [SCAN_DBG]    Bank Count Of Chip:   0x1
[    1.072896] [SCAN_DBG]    Optional Operation:   0x6d
[    1.078462] [SCAN_DBG]    Access Frequence:     0x4b
[    1.084043] [SCAN_DBG] =======================================================
[    1.084060]
[    1.093820]
[    1.095489] [FORMAT_DBG] ===========Logical Architecture Parameter===========
[    1.103504] [FORMAT_DBG]    Page Count of Logic Block:  0x40
[    1.109851] [FORMAT_DBG]    Sector Count of Logic Page: 0x8
[    1.116104] [FORMAT_DBG]    Block Count of Die:         0x200
[    1.122560] [FORMAT_DBG]    Die Count:                  0x1
[    1.128807] [FORMAT_DBG] ===================================================
[    1.136761] [DISP] disp_sys_gpio_set_value,line:374:OSAL_GPIO_DevWRITE_ONEPIN_DATA, hdl is NULL
[    1.148082] nand:found factory_bad_block(new version) table in block:26!
[    1.155629] nand:support secure storage
[    1.174085] secure storage updata ok!
[    1.178196] nand secure storage ok: 21,22
[    1.182716] NandHwInit: End Nand Hardware initializing ..... OK!
[    1.190992] nand:found factory_bad_block(new version) table in block:26!
[    1.198509] nand:support secure storage
[    1.202833] start block:23
[    1.206119] [NE]mbr read 12
[    1.209683] [NE]mbr read ok!
[    1.212937] [NE]mbr read end!
[    1.216277] [NE]mbr partition start!
[    1.220751] [NE]mbr partition ok!
[    1.224469] [NE]mbr partition end!
[    1.228298] [NE]new nand info init!!
[    1.232593] [NE]mbr read 12
[    1.236150] [NE]mbr read ok!
[    1.239396] [NE]mbr read end!
[    1.242757] [NE]get mbr_data table
[    1.247253] [ND]ok  get factory_bad_block table!
[    1.252458] [ND]factory bad block:0 215!
[    1.257544] [NE]new_bad_block table new format!
[    1.263070] [ND]ok get a new bad table!
[    1.268040] [ND]build all_phy partition start!
[    1.273044] [NE]mbr partition start!
[    1.277466] [NE]mbr partition ok!
[    1.281210] [NE]mbr partition end!
[    1.285030] [NE]partition_num: 0,size :0x36400,cross_talk 0
[    1.291301] [NE]part mbr size: 0x800 type: 0
[    1.296090] [NE]part bootloader size: 0x4000 type: 0
[    1.301673] [NE]part env size: 0x400 type: 0
[    1.306462] [NE]part boot size: 0x4000 type: 0
[    1.311460] [NE]part system size: 0x2d000 type: 0
[    1.316736] [NE]part UDISK size: 0x800 type: 0
[    1.321739] st7789v3 init over![ND]factory bad block:0,215 PartitionNO:0
[    1.329368] [ND]build 1 phy_partition !
[    1.333686] [ND]nand_info->type :0
[    1.337498] [ND]nand_info->SectorNumsPerPage :8
[    1.342592] [ND]nand_info->BytesUserData :16
[    1.347379] [ND]nand_info->PageNumsPerBlk :64
[    1.352276] [ND]nand_info->BlkPerChip :512
[    1.356867] [ND]nand_info->FirstBuild :0
[    1.361278] [ND]nand_info->FullBitmap :-1066681228
[    1.366649] [ND]nand_info->bad_block_addr.Chip_NO :0
[    1.372228] [ND]nand_info->bad_block_addr.Block_NO :13
[    1.377989] [ND]nand_info->mbr_block_addr.Chip_NO :0
[    1.383568] [ND]nand_info->mbr_block_addr.Block_NO :12
[    1.389329] [ND]nand_info->no_used_block_addr.Chip_NO :0
[    1.395298] [ND]nand_info->no_used_block_addr.Block_NO :16
[    1.401462] [ND]nand_info->new_bad_block_addr.Chip_NO :0
[    1.407417] [ND]nand_info->new_bad_block_addr.Block_NO :14
[    1.413582] [ND]nand_info->new_bad_page_addr :65535
[    1.419050] [ND]nand_info->partition_nums :1
[    1.423854] [ND]sizeof partition:1192
[    1.427959] [ND]nand_info->partition:0:
[    1.432273] [ND]size:0x36400
[    1.435500] [ND]cross_talk:0x0
[    1.438921] [ND]attribute:0x0
[    1.442261] [ND]start: chip:0 block:16
[    1.446464] [ND]end  : chip:0 block:511
[    1.451234] [ND]nand_partition0
[    1.454877] [ND]nftl start:496,62
[    1.458712] [ND]first
[    1.485312] [ND]bad block: 199
[    1.524369] [ND]before second 495 434.
[    1.528673] LCD_bl_open 104 ..........
[    1.532916] LCD_bl_open 105 ++++++++++++++++++++++++
[    1.538614] [DISP] disp_lcd_pwm_enable,line:1023:pwm device hdl is NULL
[    1.703907] [NE]smart->version:aaaaaa01;
[    1.708318] [NE]smart->total_recv_read_sectors:9022;
[    1.713912] [NE]smart->total_recv_write_sectors:184534;
[    1.719770] [NE]smart->total_real_read_pages:1245;
[    1.725157] [NE]smart->total_real_write_pages:23552;
[    1.730737] [NE]smart->total_recv_discard_sectors:0;
[    1.736303] [NE]smart->total_real_discard_sectors:0;
[    1.741883] [NE]smart->total_recv_read_claim_pages:0;
[    1.747546] [NE]smart->total_gc_times:0;
[    1.751956] [NE]smart->total_gc_pages:0;
[    1.756353] [NE]smart->total_wl_times:0;
[    1.760763] [NE]smart->total_real_read_error_pages:0;
[    1.766426] [NE]smart->total_real_write_error_pages:0;
[    1.772201] [NE]smart->total_normal_power_cycles:2;
[    1.777669] [NE]smart->total_unusual_power_cycles:0;
[    1.783248] [NE]smart->max_block_erase_times:0;
[    1.788326] [NE]smart->min_block_erase_times:0;
[    1.793418] [NE]smart->max_block_used_counter:0;
[    1.798594] [NE]smart->min_block_used_counter:0;
[    1.803783] [NE]smart->read_reclaim_utc:0;
[    1.811149] [NE]recover_phy_page_mapping no used page 5!!
[    1.817209] [ND]recover 126 5
[    1.820561] [ND]A64 nand2.0 version:0009
[    1.825057] [ND]zone->nand_chip->blk_per_chip: 496
[    1.830542] [ND]zone->nand_chip->bytes_per_page: 4096
[    1.836303] [ND]zone->nand_chip->pages_per_blk: 64
[    1.841786] [ND]zone->nand_chip->max_erase_times: 3000
[    1.847645] [ND]zone->nand_chip->support_read_reclaim: 1
[    1.853711] [ND]zone->test: 0
[    1.857133] [ND]zone->zone_no: 0
[    1.860860] [ND]zone->zone_attr: 0
[    1.864762] [ND]zone->blocks: 495
[    1.868574] [ND]zone->bad_block: 1
[    1.872498] [ND]zone->logic_cap_in_sects: 222208
[    1.877771] [ND]zone->backup_cap_in_sects: 31232
[    1.883058] [ND]zone->free_block_num: 126
[    1.887651] [ND]zone->gc_strategy.start_gc_free_blocks: 12
[    1.893912] [ND]zone->gc_strategy.stop_gc_free_blocks: 40
[    1.900076] [ND]zone->gc_strategy.gc_page: 0
[    1.904960] [ND]zone->gc_strategy.process: 1
[    1.909843] [ND]zone->prio_gc.prio_type : 0
[    1.914644] [ND]zone->zone_start_phy_block->phy_block.Block_NO: 0
[    1.921589] [ND]zone->zone_end_phy_block->phy_block.Block_NO: 495
[    1.928520] [ND]zone->zone_phy_page_map_for_gc: c55f2800
[    1.934588] [ND]zone->current_block.user_info: c55ad000
[    1.940558] [ND]zone->current_block.block_info: c55e91b8
[    1.946612] [ND]zone->current_block.block_info->phy_block.Block_NO: 126
[    1.954140] [ND]zone->current_block.page_used: 5
[    1.959414] [ND]zone->current_block.block_info->block_used_count: 368
[    1.966748] [ND]zone->read_reclaim_complete: 0
[    1.971842] [ND]zone->temp_page_buf: c55e7000
[    1.976823] [ND]zone->max_erase_num: 1
[    1.981136] [ND]zone->cache.cache_totals: 0
[    1.985923] [ND]zone->cfg->nftl_dont_use_cache: 1
[    1.991308] [ND]zone->cfg->nftl_use_cache_sort: 1
[    1.996680] [ND]zone->cfg->nftl_support_gc_read_reclaim: 1
[    2.002945] [ND]zone->cfg->nftl_support_wear_leveling: 1
[    2.008997] [ND]zone->cfg->nftl_need_erase: 0
[    2.013993] [ND]zone->cfg->nftl_min_free_block_num: 32
[    2.019852] [ND]zone->cfg->nftl_gc_threshold_free_block_num: a
[    2.026503] [ND]zone->cfg->nftl_min_free_block: a
[    2.031889] [ND]zone->cfg->nftl_gc_threshold_ratio_numerator: 2
[    2.038624] [ND]zone->cfg->nftl_gc_threshold_ratio_denominator: 3
[    2.045568] [ND]zone->cfg->nftl_max_cache_num: 20
[    2.050954] [ND]zone->cfg->nftl_max_cache_write_num: 10
[    2.056910] [ND]zone->cfg->nftl_cross_talk: 0
[    2.061906] [ND]zone->cfg->nftl_read_claim_interval: 1296000
[    2.068349] [NE]smart->version:aaaaaa01;
[    2.072759] [NE]smart->total_recv_read_sectors:9022;
[    2.078325] [NE]smart->total_recv_write_sectors:184534;
[    2.084197] [NE]smart->total_real_read_pages:1251;
[    2.089568] [NE]smart->total_real_write_pages:23552;
[    2.095147] [NE]smart->total_recv_discard_sectors:0;
[    2.100726] [NE]smart->total_real_discard_sectors:0;
[    2.106292] [NE]smart->total_recv_read_claim_pages:0;
[    2.111969] [NE]smart->total_gc_times:0;
[    2.116366] [NE]smart->total_gc_pages:0;
[    2.120776] [NE]smart->total_wl_times:0;
[    2.125173] [NE]smart->total_real_read_error_pages:0;
[    2.130850] [NE]smart->total_real_write_error_pages:0;
[    2.136610] [NE]smart->total_normal_power_cycles:2;
[    2.142093] [NE]smart->total_unusual_power_cycles:0;
[    2.147658] [NE]smart->max_block_erase_times:0;
[    2.152750] [NE]smart->min_block_erase_times:0;
[    2.157829] [NE]smart->max_block_used_counter:0;
[    2.163018] [NE]smart->min_block_used_counter:0;
[    2.168194] [NE]smart->read_reclaim_utc:0;
[    2.172797] [ND]nftl ok!
[    2.175729] [ND]max_erase_times = 65000
[    2.180268] [NAND]nand_dev add mbr
[    2.184090] [NAND]nand_dev add bootloader
[    2.190586]  nanda:
[    2.193417] [NAND]nand_dev add env
[    2.200740]  nandb: unknown partition table
[    2.205926] [NAND]nand_dev add boot
[    2.213312]  nandc: unknown partition table
[    2.218505] [NAND]nand_dev add system
[    2.226063]  nandd: unknown partition table
[    2.231326] [NAND]nand_dev add UDISK
[    2.237279]  nande: unknown partition table
[    2.242704] [NAND]nand init end
[    2.246920] sunxi_spi_chan_cfg()1376 - [spi-0] has no spi_regulator.
[    2.255163] spi spi0: master is unqueued, this is deprecated
[    2.261848] m25p_probe()966 - Use the Dual Mode Read.
[    2.267630] NorFlash ID: 0x18425 - 0x8425
[    2.272194] m25p80 spi0.0: unrecognized JEDEC id 018425
[    2.279844] usbcore: registered new interface driver rtl8192cu
[    2.286610] usbcore: registered new interface driver rt2500usb
[    2.293355] usbcore: registered new interface driver rt73usb
[    2.299822] usbcore: registered new interface driver rt2800usb
[    2.306422] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.333878] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.342921] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
[    2.351590] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
[    2.370051] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
[    2.378026] hub 1-0:1.0: USB hub found
[    2.382326] hub 1-0:1.0: 1 port detected
[    2.387615] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.414743] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    2.423393] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 2
[    2.431997] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
[    2.495198] hub 2-0:1.0: USB hub found
[    2.499438] hub 2-0:1.0: 1 port detected
[    2.504713] Initializing USB Mass Storage driver...
[    2.510476] usbcore: registered new interface driver usb-storage
[    2.517214] USB Mass Storage support registered.
[    2.522525] usbcore: registered new interface driver ums-cypress
[    2.529340] usbcore: registered new interface driver ums_eneub6250
[    2.536411] usbcore: registered new interface driver ums-freecom
[    2.543245] usbcore: registered new interface driver ums-isd200
[    2.549986] usbcore: registered new interface driver ums-jumpshot
[    2.556977] usbcore: registered new interface driver ums-realtek
[    2.563813] usbcore: registered new interface driver ums-sddr09
[    2.570567] usbcore: registered new interface driver ums-sddr55
[    2.577285] usbcore: registered new interface driver ums-usbat
[    2.584510] file system registered
[    2.591380] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    2.599106] android_usb gadget: Number of LUNs=1
[    2.604467]  lun0: LUN: removable file: (no medium)
[    2.610904] android_usb gadget: android_usb ready
[    2.616836] mousedev: PS/2 mouse device common for all mice
[    2.623316] sunxikbd_script_init: key para not found, used default para.
[    2.632672] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
[    2.640253] i2c /dev entries driver
[    2.644843] uvcvideo: Adding mapping Brightness to control 00000000-0000-0000-0000-000000000101/2.
[    2.654997] uvcvideo: Adding mapping Contrast to control 00000000-0000-0000-0000-000000000101/3.
[    2.664876] uvcvideo: Adding mapping Hue to control 00000000-0000-0000-0000-000000000101/6.
[    2.674265] uvcvideo: Adding mapping Saturation to control 00000000-0000-0000-0000-000000000101/7.
[    2.684367] uvcvideo: Adding mapping Sharpness to control 00000000-0000-0000-0000-000000000101/8.
[    2.694345] uvcvideo: Adding mapping Gamma to control 00000000-0000-0000-0000-000000000101/9.
[    2.703931] uvcvideo: Adding mapping Backlight Compensation to control 00000000-0000-0000-0000-000000000101/1.
[    2.715173] uvcvideo: Adding mapping Gain to control 00000000-0000-0000-0000-000000000101/4.
[    2.724678] uvcvideo: Adding mapping Power Line Frequency to control 00000000-0000-0000-0000-000000000101/5.
[    2.735730] uvcvideo: Adding mapping Hue, Auto to control 00000000-0000-0000-0000-000000000101/16.
[    2.745807] uvcvideo: Adding mapping Exposure, Auto to control 00000000-0000-0000-0000-000000000001/2.
[    2.756273] uvcvideo: Adding mapping Exposure, Auto Priority to control 00000000-0000-0000-0000-000000000001/3.
[    2.767617] uvcvideo: Adding mapping Exposure (Absolute) to control 00000000-0000-0000-0000-000000000001/4.
[    2.778568] uvcvideo: Adding mapping White Balance Temperature, Auto to control 00000000-0000-0000-0000-000000000101/11.
[    2.790788] uvcvideo: Adding mapping White Balance Temperature to control 00000000-0000-0000-0000-000000000101/10.
[    2.802422] uvcvideo: Adding mapping White Balance Component, Auto to control 00000000-0000-0000-0000-000000000101/13.
[    2.814442] uvcvideo: Adding mapping White Balance Blue Component to control 00000000-0000-0000-0000-000000000101/12.
[    2.826365] uvcvideo: Adding mapping White Balance Red Component to control 00000000-0000-0000-0000-000000000101/12.
[    2.838196] uvcvideo: Adding mapping Focus (absolute) to control 00000000-0000-0000-0000-000000000001/6.
[    2.848875] uvcvideo: Adding mapping Focus, Auto to control 00000000-0000-0000-0000-000000000001/8.
[    2.859055] uvcvideo: Adding mapping Zoom, Absolute to control 00000000-0000-0000-0000-000000000001/11.
[    2.869622] uvcvideo: Adding mapping Zoom, Continuous to control 00000000-0000-0000-0000-000000000001/12.
[    2.880388] uvcvideo: Adding mapping Privacy to control 00000000-0000-0000-0000-000000000001/17.
[    2.890441] usbcore: registered new interface driver uvcvideo
[    2.896885] USB Video Class driver (v1.0.8_SONiX_v2.6.36.04)
[    2.903478] sunxi cedar version 0.1
[    2.907606] [cedar]: install start!!!
[    2.912179] [cedar]: install end!!!
[    2.916160] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0
[    2.923608] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf
[    2.935092] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0)
[    2.942659] wdt_enable, write reg 0xf1c20cb8 val 0x00000000
[    2.948918] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec
[    2.958399] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.114 2015-6-2 10:21) Compiled in Dec 13 2021 at 11:12:54
[    2.969868] [mmc]: get mmc0's IO(sdc_cd) failed
[    2.974996] [mmc]: get mmc0's sdc_power failed
[    2.980037] [mmc]: get mmc1's sdc_power failed
[    2.985039] [mmc]: MMC host used card: 0x3, boot card: 0x0, io_card 2
[    2.993341] [mmc]: *** sunxi_mci_request_mmcio(L1379): sdc0 request io(cd) failed
[    3.001805] [mmc]: *** sunxi_mci_resource_request(L1580): sdc0 request mmcio failed
[    3.010899] [mmc]: *** sunxi_mci_free_mmcio(L1504): sdc0 set cd mulsel failed
[    3.018911] [mmc]: *** sunxi_mci_probe(L3090): sunxi-mmc.0: Failed to get resouce.
[    3.028442] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    3.041729] sunxi_leds_fetch_sysconfig_para script_parser_fetch "leds_para" leds_used = -1066837212
[    3.051981] =========script_get_err============
[    3.057718] usbcore: registered new interface driver usbhid
[    3.064055] usbhid: USB HID core driver
[    3.069121] usbcore: registered new interface driver snd-usb-audio
[    3.076331] Netfilter messages via NETLINK v0.30.
[    3.081669] nfnl_acct: registering with nfnetlink.
[    3.087156] nf_conntrack version 0.5.0 (1335 buckets, 5340 max)
[    3.094555] ctnetlink v0.93: registering with nfnetlink.
[    3.100664] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    3.108476] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    3.115603] xt_time: kernel timezone is -0000
[    3.120567] ip_set: protocol 6
[    3.124470] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.130794] arp_tables: (C) 2002 David S. Miller
[    3.136092] TCP: cubic registered
[    3.140172] NET: Registered protocol family 10
[    3.146825] IPv6 over IPv4 tunneling driver
[    3.152945] NET: Registered protocol family 17
[    3.158199] ThumbEE CPU extension supported.
[    3.163081] Registering SWP/SWPB emulation handler
[    3.170745] sunxi-rtc sunxi-rtc: setting system clock to 1970-01-01 00:01:27 UTC (87)
[    3.182227] =========GPS========= :failed to fetch gps configuration!
[    3.189477] ALSA device list:
[    3.192872]   No soundcards found.
[    4.762231] TC Complete wait status timeout!
[    4.767034] wait tc complete timeout!
[    6.335585] TC Complete wait status timeout!
[    6.340388] wait tc complete timeout!
[    6.344502] PHY_PageRead bad flag: bank 0x0  block 0x1ed  page 0xa
[    6.351580] PHY_PageRead : bank 0 blk 493 pg 10 read timeout
[    7.923438] TC Complete wait status timeout!
[    7.928240] wait tc complete timeout!
[    9.496813] TC Complete wait status timeout!
[    9.501613] wait tc complete timeout!
[    9.505727] PHY_PageRead bad flag: bank 0x0  block 0x1ed  page 0xa
[    9.512806] PHY_PageRead : bank 0 blk 493 pg 10 read timeout
[   11.084361] TC Complete wait status timeout!
[   11.089160] wait tc complete timeout!
[   12.657759] TC Complete wait status timeout!
[   12.662582] wait tc complete timeout!
[   12.666714] PHY_PageRead bad flag: bank 0x0  block 0x1ed  page 0xa
[   12.673793] PHY_PageRead : bank 0 blk 493 pg 10 read timeout
[   14.245408] TC Complete wait status timeout!
[   14.250224] wait tc complete timeout!
[   15.818857] TC Complete wait status timeout!
[   15.823657] wait tc complete timeout!
[   15.827771] PHY_PageRead bad flag: bank 0x0  block 0x1ed  page 0xa
[   15.834850] PHY_PageRead : bank 0 blk 493 pg 10 read timeout
[   17.406156] TC Complete wait status timeout!
[   17.410967] wait tc complete timeout!
[   18.979522] TC Complete wait status timeout!
[   18.984322] wait tc complete timeout!
[   18.988436] PHY_PageRead bad flag: bank 0x0  block 0x1ed  page 0xb
[   18.995515] PHY_PageRead : bank 0 blk 493 pg 11 read timeout
[   20.566761] TC Complete wait status timeout!
[   20.571572] wait tc complete timeout!
[   22.140095] TC Complete wait status timeout!
[   22.144882] wait tc complete timeout!
[   22.148996] PHY_PageRead bad flag: bank 0x0  block 0x1ed  page 0xc
[   22.156074] PHY_PageRead : bank 0 blk 493 pg 12 read timeout
[   23.727225] TC Complete wait status timeout!
[   23.732036] wait tc complete timeout!
[   25.300566] TC Complete wait status timeout!
[   25.305353] wait tc complete timeout!
[   25.309467] PHY_PageRead bad flag: bank 0x0  block 0x1ed  page 0xd
[   25.316547] PHY_PageRead : bank 0 blk 493 pg 13 read timeout
[   26.888137] TC Complete wait status timeout!
[   26.892954] wait tc complete timeout!
[   28.461548] TC Complete wait status timeout!
[   28.466359] wait tc complete timeout!
[   28.470504] PHY_PageRead bad flag: bank 0x0  block 0x1ed  page 0xa
[   28.477536] PHY_PageRead : bank 0 blk 493 pg 10 read timeout
[   30.049015] TC Complete wait status timeout!
[   30.053828] wait tc complete timeout!
[   30.057941] TX FIFO size error!
[   31.625967] TC Complete wait status timeout!
[   31.630791] wait tc complete timeout!
[   31.634904] PHY_PageRead bad flag: bank 0x0  block 0x1ed  page 0xa
[   31.641983] PHY_PageRead : bank 0 blk 493 pg 10 read timeout
[   33.213375] TC Complete wait status timeout!
[   33.218172] wait tc complete timeout!
[   34.786900] TC Complete wait status timeout!
[   34.791723] wait tc complete timeout!
[   34.795852] PHY_PageRead bad flag: bank 0x0  block 0x1ed  page 0xa
[   34.802902] PHY_PageRead : bank 0 blk 493 pg 10 read timeout
[   34.809400] List of all partitions:
[   34.813365] 5d00            8192 nanda  (driver?)
[   34.818658] 5d08             512 nandb  (driver?)
[   34.823971] 5d10            8192 nandc  (driver?)
[   34.829260] 5d18           92160 nandd  (driver?)
[   34.834566] 5d20            1024 nande  (driver?)
[   34.839845] No filesystem could mount root, tried:  ext3 ext2 ext4 cramfs squashfs vfat ntfs
[   34.849378] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(93,24)
[   34.858856] Backtrace:
[   34.861666] [<c0013490>] (dump_backtrace+0x0/0x110) from [<c04cc024>] (dump_stack+0x18/0x1c)
[   34.871153]  r6:00008000 r5:c5437029 r4:c5437029 r3:00000001
[   34.877578] [<c04cc00c>] (dump_stack+0x0/0x1c) from [<c04cc22c>] (panic+0x78/0x1cc)
[   34.886216] [<c04cc1b4>] (panic+0x0/0x1cc) from [<c0680cf8>] (mount_block_root+0x1e0/0x224)
[   34.895603]  r3:c5427ef4 r2:00000020 r1:c5427f20 r0:c05d5363
[   34.902017]  r7:c06a3c84
[   34.904898] [<c0680b18>] (mount_block_root+0x0/0x224) from [<c0680e2c>] (mount_root+0xf0/0x110)
[   34.914696] [<c0680d3c>] (mount_root+0x0/0x110) from [<c0680f70>] (prepare_namespace+0x124/0x184)
[   34.924665]  r7:c0702bc0 r6:c06a3c5c r5:c06a3c95 r4:c0702c24
[   34.931107] [<c0680e4c>] (prepare_namespace+0x0/0x184) from [<c06808f0>] (kernel_init+0x16c/0x1a8)
[   34.941173]  r5:c06a3c7c r4:00000007
[   34.945233] [<c0680784>] (kernel_init+0x0/0x1a8) from [<c0031bf8>] (do_exit+0x0/0x660)

[   34.791723] wait tc complete timeout!
[   34.795852] PHY_PageRead bad flag: bank 0x0  block 0x1ed  page 0xa
[   34.802902] PHY_PageRead : bank 0 blk 493 pg 10 read timeout
[   34.809400] List of all partitions:
[   34.813365] 5d00            8192 nanda  (driver?)
[   34.818658] 5d08             512 nandb  (driver?)
[   34.823971] 5d10            8192 nandc  (driver?)
[   34.829260] 5d18           92160 nandd  (driver?)
[   34.834566] 5d20            1024 nande  (driver?)
[   34.839845] No filesystem could mount root, tried:  ext3 ext2 ext4 cramfs squashfs vfat ntfs
[   34.849378] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(93,24)
[   34.858856] Backtrace:
[   34.861666] [<c0013490>] (dump_backtrace+0x0/0x110) from [<c04cc024>] (dump_stack+0x18/0x1c)
[   34.871153]  r6:00008000 r5:c5437029 r4:c5437029 r3:00000001
[   34.877578] [<c04cc00c>] (dump_stack+0x0/0x1c) from [<c04cc22c>] (panic+0x78/0x1cc)
[   34.886216] [<c04cc1b4>] (panic+0x0/0x1cc) from [<c0680cf8>] (mount_block_root+0x1e0/0x224)
[   34.895603]  r3:c5427ef4 r2:00000020 r1:c5427f20 r0:c05d5363
[   34.902017]  r7:c06a3c84
[   34.904898] [<c0680b18>] (mount_block_root+0x0/0x224) from [<c0680e2c>] (mount_root+0xf0/0x110)
[   34.914696] [<c0680d3c>] (mount_root+0x0/0x110) from [<c0680f70>] (prepare_namespace+0x124/0x184)
[   34.924665]  r7:c0702bc0 r6:c06a3c5c r5:c06a3c95 r4:c0702c24
[   34.931107] [<c0680e4c>] (prepare_namespace+0x0/0x184) from [<c06808f0>] (kernel_init+0x16c/0x1a8)
[   34.941173]  r5:c06a3c7c r4:00000007
[   34.945233] [<c0680784>] (kernel_init+0x0/0x1a8) from [<c0031bf8>] (do_exit+0x0/0x660)

折腾两天，对照逻辑分析仪和手册，终于用D1s 把这个 st7789 i80给点亮了。

手册： EP952-技术参数.pdf

https://raw.githubusercontent.com/naobsd/sunxi-boards/nes-classic-edition/sys_config/a33/nintendo_nes_classic_edition.fex

https://bitbucket.org/bakueikozo/workspace/snippets/RLz6ok

https://github.com/linux-sunxi/sunxi-boards/blob/master/sys_config/a33/nintendo_nes_classic_clv001.fex

IIS_BCLK = port:PE03<4><1><1><1>
IIS_LRCK = port:PE04<4><1><1><1>
IIS_DO0 = port:PE06<4><1><1><1>

card_line = 1
SDC_CLK = port:PF02<2><1><1><1>
SDC_CMD = port:PF03<2><1><1><1>
SDC_D0 = port:PF01<2><1><1><1>
SDC_D1 = port:PF00<2><1><1><1>
SDC_D2 = port:PF05<2><1><1><1>
SDC_D3 = port:PF04<2><1><1><1>

uart_io_tx = port:PA00<3><1><1><default>

twi2_scl = port:PE00<4><1><1><1>
twi2_sda = port:PE01<4><1><1><1>

uart_debug_tx = port:PE07<3><1><1><default>
uart_debug_rx = port:PE08<3><1><1><default>

tv_en = port:PC11<1><2><1><1>

detect_pin = port:PF04<0><1><1><1>
pwm0 = port:PE12<4><0><1><1>
pwm1 = port:PF05<4><0><1><1>

bus_width = 1
SDC_CLK = port:PF02<2><1><1><1>
SDC_CMD = port:PF03<2><1><1><1>
SDC_D0 = port:PF01<2><1><1><1>

bus_width = 1
SDC_CLK = port:PC00<3><1><1><1>
SDC_CMD = port:PC01<3><1><1><1>
SDC_D0 = port:PC02<3><1><1><1>

hp_driver_need = 1
PA_SHDN = port:PC09<1><1><1><1>

SPI_CS0 = port:PC01<2><1><1><1>
SPI_CLK = port:PC00<2><1><1><1>
SPI_MOSI = port:PC03<2><1><1><1>
SPI_MISO = port:PC02<2><1><1><1>

IR_RX = port:PF00<4><1><1><1>

lcdd2 = port:PD00<2><1><3><1>
lcdd3 = port:PD01<2><1><3><1>
lcdd4 = port:PD02<2><1><3><1>
lcdd5 = port:PD03<2><1><3><1>
lcdd6 = port:PD04<2><1><3><1>
lcdd7 = port:PD05<2><1><3><1>
lcdd10 = port:PD06<2><1><3><1>
lcdd11 = port:PD07<2><1><3><1>
lcdd12 = port:PD08<2><1><3><1>
lcdd13 = port:PD09<2><1><3><1>
lcdd14 = port:PD10<2><1><3><1>
lcdd15 = port:PD11<2><1><3><1>
lcdd18 = port:PD12<2><1><3><1>
lcdd19 = port:PD13<2><1><3><1>
lcdd20 = port:PD14<2><1><3><1>
lcdd21 = port:PD15<2><1><3><1>
lcdd22 = port:PD16<2><1><3><1>
lcdd23 = port:PD17<2><1><3><1>
lcdclk = port:PD18<2><1><3><1>
lcdde = port:PD19<2><1><3><1>
lcdhsync = port:PD20<2><1><3><1>
lcdvsync = port:PD21<2><1><3><1>

浓缩了一下

[update_key]
key_type = 1
key_value0 = 0
port0 = 1
port_num0 = 1
key_value1 = 0
port1 = 1
port_num1 = 1
key_value2 = 0
port2 = 1
port_num2 = 2

[bt_para]
bt_name = "AMMT"
bt_pin = "0000"
bt_mic_vol = 40

[target]
debugenable = 0
storage_mode = 0
boot_clock = 408
core_vol = 1100

[product]
eraseflag = 0
jtag = 0

[card_boot]
logical_start = 40960

[card_boot0_para]
card_ctrl = 0
card_high_speed = 1
card_line = 1
SDC_CLK = port:PF02<2><1><1><1>
SDC_CMD = port:PF03<2><1><1><1>
SDC_D0 = port:PF01<2><1><1><1>
SDC_D1 = port:PF00<2><1><1><1>
SDC_D2 = port:PF05<2><1><1><1>
SDC_D3 = port:PF04<2><1><1><1>

[iis_para]
IIS_BCLK = port:PE03<4><1><1><1>
IIS_LRCK = port:PE04<4><1><1><1>
IIS_DO0 = port:PE06<4><1><1><1>

[twi_para]
twi_port = 0
twi_scl = port:PA06<2><1><1><default>
twi_sda = port:PA07<2><1><1><default>

[simu_para]
uart_io_used = 1
uart_io_tx = port:PA00<3><1><1><default>

[jtag_para]
jtag_enable = 0

[twi0_para]
twi0_used = 0
twi_scl = port:PE11<3><1><1><1>
twi_sda = port:PE12<3><1><1><1>

[twi1_para]
twi1_used = 0
twi1_scl = port:PB00<3><1><1><1>
twi1_sda = port:PB01<3><1><1><1>

[twi2_para]
twi2_used = 1
twi2_scl = port:PE00<4><1><1><1>
twi2_sda = port:PE01<4><1><1><1>

[uart_para0]
uart_used = 0
uart_port = 0
uart_type = 2
uart_debug_tx = port:PE01<5><1><1><default>
uart_debug_rx = port:PE00<5><1><1><default>

[uart_para1]
uart_used = 0
uart_port = 1
uart_type = 2

[uart_para2]
uart_used = 1
uart_port = 2
uart_type = 2
uart_debug_tx = port:PE07<3><1><1><default>
uart_debug_rx = port:PE08<3><1><1><default>

[power_para]
power_used = 0
power_msg = 56
power_twi = 0
adc_exp = 1027

[rtc_para]
rtc_exist = 0
inner_timer = 1

[display_mode]
pvp_mode = 1

[tvout_para]
tv_en = port:PC11<1><2><1><1>

[auto_test_para]
auto_test_enable = 0

[matrixkey_para]
period = 5
pw_off_time = 2000
row_num = 2

[dsa_para]
DSA_USED = 0

[sddet_para]
detect_pin = port:PF04<0><1><1><1>

[sdcard_global]
used_card_no = 1

[pwm0_para]
pwm0 = port:PE12<4><0><1><1>

[pwm1_para]
pwm1 = port:PF05<4><0><1><1>

[sdcard0_para]
bus_width = 1
SDC_CLK = port:PF02<2><1><1><1>
SDC_CMD = port:PF03<2><1><1><1>
SDC_D0 = port:PF01<2><1><1><1>

[sdcard1_para]
bus_width = 1
SDC_CLK = port:PC00<3><1><1><1>
SDC_CMD = port:PC01<3><1><1><1>
SDC_D0 = port:PC02<3><1><1><1>

[audio_para]
hp_driver_need = 1
PA_SHDN = port:PC09<1><1><1><1>

[tp_para]
if_reverse = 1

[spi_global]
spi_used = 1

[spi0_para]
spi_cs_bitmap = 1
SPI_CS0 = port:PC01<2><1><1><1>
SPI_CLK = port:PC00<2><1><1><1>
SPI_MOSI = port:PC03<2><1><1><1>
SPI_MISO = port:PC02<2><1><1><1>

[ir_para]
IR_RX = port:PF00<4><1><1><1>

[lcd0_para]
lcd_power_used = 0
lcd_bl_en_used = 0
lcd_pwm_used = 0
lcdd2 = port:PD00<2><1><3><1>
lcdd3 = port:PD01<2><1><3><1>
lcdd4 = port:PD02<2><1><3><1>
lcdd5 = port:PD03<2><1><3><1>
lcdd6 = port:PD04<2><1><3><1>
lcdd7 = port:PD05<2><1><3><1>
lcdd10 = port:PD06<2><1><3><1>
lcdd11 = port:PD07<2><1><3><1>
lcdd12 = port:PD08<2><1><3><1>
lcdd13 = port:PD09<2><1><3><1>
lcdd14 = port:PD10<2><1><3><1>
lcdd15 = port:PD11<2><1><3><1>
lcdd18 = port:PD12<2><1><3><1>
lcdd19 = port:PD13<2><1><3><1>
lcdd20 = port:PD14<2><1><3><1>
lcdd21 = port:PD15<2><1><3><1>
lcdd22 = port:PD16<2><1><3><1>
lcdd23 = port:PD17<2><1><3><1>
lcdclk = port:PD18<2><1><3><1>
lcdde = port:PD19<2><1><3><1>
lcdhsync = port:PD20<2><1><3><1>
lcdvsync = port:PD21<2><1><3><1>

[csi0_para]

[usb_para]
usb_global_enable = 1
usbc_num = 1
mode = 1

[usbc0]
usb_enable = 1
usb_port_type = 2
usb_detect_type = 3

[dram_para]
baseaddr = -2147483648
size = 0
clk = 156
access_mode = 1
cs_num = 1
ddr8_remap = 0
sdr_ddr = 1
bwidth = 16
col_width = 10
row_width = 13
bank_size = 4
cas = 3

[standby_eint_para]

[display]
out_type = 0
lcd_swap = 0
lcd_x = 800
lcd_y = 480
lcd_dclk_div = 8
sta_dly = 10
lcd_basic_valid = 0
lcd_uf = 0
lcd_vt = 1050
lcd_ht = 1055
lcd_vbp = 34
lcd_hbp = 215
lcd_if = 0
lcd_hv_if = 0
lcd_hv_smode = 0
lcd_hv_s888_if = 0
lcd_hv_syuv_if = 0
lcd_hv_vspw = 0
lcd_hv_hspw = 0
lcd_hv_lde_used = 0
lcd_hv_lde_iovalue = 0
lcd_cpu_if = 0
lcd_io_cfg0 = 67108864
lcd_io_cfg1 = 0

[spinor_para]
spinor_patten_num = 5

[spinor0]
rdid = 1450178
capaticy = 32
freq_read = 33000000
freq = 86000000

[spinor1]
rdid = 4627839
capaticy = 32
freq_read = 10000000
freq = 50000000

[spinor2]
rdid = 1581250
capaticy = 128
freq_read = 33000000
freq = 86000000

[spinor3]
rdid = 1515714
capaticy = 64
freq_read = 33000000
freq = 86000000

[spinor4]
rdid = 1581250
capaticy = 128
freq_read = 33000000
freq = 86000000

[power]
Battery_cap = 2200
Discharge_rate = 10

[boot_extend]
hold_key_min = -268435456
hold_key_max = -268435456
vol_threshold = 3500

[modupdate]
reset = 1

[mbr]
size = 1

[part_num]
num = 1

[partition0]
class_name = "000"
name = "000"
size_hi = 0
size_lo = 3823

[down_num]
down_num = 1

[download0]
part_name = "000"
pkt_name = "000000000"
verify_file = "000000000"
encrypt = 0

这是fex文件，免得用万用表去量引脚了。

试一试：

echo 7 > /proc/sys/kernel/printk

看我的，V3s 8723DS 跑 a2dp_sink_demo，完全OK

@ubuntu

这个错误可以不用理，直接怼个 btstack 就能用了。

请问阿里云ECS虚拟机底层是用什么技术，为什么运行了几年的Ubuntu系统，磁盘扩容几秒钟就可以搞定，而且不会损坏原来的数据。

V3s      < ------->     ILI9341
                           CS <- 直接接地
LCD_DE                  RS
LCD_HSYNC              RD
LCD_PCLK                WR
LCD_VSYNC             TE  #撕裂

PE4         RST

LCD_D3      D8 
LCD_D4     D9 
LCD_D5     D10
LCD_D6     D11 
LCD_D7     D12 
LCD_D10    D13 
LCD_D11    D14 
LCD_D12    D15 

可是驱动 ILI9341 是正常的。

感谢， 搞定！就是修改这个文件的loglevel就可以了

pack/chips/sun8iw8p1/configs/default/env.cfg

只有73行日志输出， 74，75行都没有输出，这是什么问题呢？

@nancheng 在 哪吒D1开发板 LVGL7 源码下载（带git仓库） 中说：

这是用cpu跑的吧，没有使用G2D模块吧

对，CPU计算的，没有用G2D。

rtk_hciattach 编译：

cd /opt/D1/tina_d1_open/package/utils/rtk_hciattach/src

CC=/opt/v3s/dreamer_v1/output/host/bin/arm-linux-gnueabihf-gcc make

固件位置：

/opt/D1/tina_d1_open/package/firmware/linux-firmware/rtl8723ds

复制到文件系统位置：

lib/firmware/rtlbt/

# rtk_hciattach_2  -n -s 115200 /dev/ttyS1 rtk_h5
Realtek Bluetooth :Realtek Bluetooth init uart with init speed:115200, type:HCI UART H5
Realtek Bluetooth :Realtek hciattach version 3.1

Realtek Bluetooth :Use epoll
Realtek Bluetooth :[SYNC] Get SYNC Resp Pkt
Realtek Bluetooth :[CONFIG] Get SYNC pkt
Realtek Bluetooth :[CONFIG] Get CONFG pkt
Realtek Bluetooth :[CONFIG] Get CONFG resp pkt
Realtek Bluetooth :dic is 1, cfg field 0x14
Realtek Bluetooth :H5 init finished

Realtek Bluetooth :Realtek H5 IC
Realtek Bluetooth :Receive cmd complete event of command: 1001
Realtek Bluetooth :HCI Version 0x08
Realtek Bluetooth :HCI Revision 0x000d
Realtek Bluetooth :LMP Subversion 0x8723
Realtek Bluetooth :Receive cmd complete event of command: fc6d
Realtek Bluetooth :Read ROM version 02
Realtek Bluetooth :LMP Subversion 0x8723
Realtek Bluetooth :EVersion 2
Realtek Bluetooth :IC: RTL8723DS
Realtek Bluetooth :Firmware/config: rtl8723d_fw, rtl8723d_config
Realtek Bluetooth :Couldnt open extra config /opt/rtk_btconfig.txt, No such file or directory
Realtek Bluetooth :Couldnt access customer BT MAC file /opt/bdaddr
Realtek Bluetooth :Origin cfg len 48
Realtek Bluetooth :55 ab 23 87 2a 00 0c 00 10 02 80 92 04 50 c5 ea
Realtek Bluetooth :19 e1 1b fd af 5f 01 a4 0b d9 00 01 0f e4 00 01
Realtek Bluetooth :08 f3 00 01 0c f4 00 08 01 00 01 90 00 00 09 04
Realtek Bluetooth :Config baudrate: 04928002
Realtek Bluetooth :uart flow ctrl: 1
Realtek Bluetooth :Vendor baud from Config file: 04928002
Realtek Bluetooth :New cfg len 48
Realtek Bluetooth :55 ab 23 87 2a 00 0c 00 10 02 80 92 04 50 c5 ea
Realtek Bluetooth :19 e1 1b fd af 5f 01 a4 0b d9 00 01 0f e4 00 01
Realtek Bluetooth :08 f3 00 01 0c f4 00 08 01 00 01 90 00 00 09 04
Realtek Bluetooth :Load FW /lib/firmware/rtlbt/rtl8723d_fw OK, size 52096
Realtek Bluetooth :rtb_get_fw_project_id: opcode 0, len 1, data 9
Realtek Bluetooth :FW version 0xaa7add92, Patch num 3
Realtek Bluetooth :Chip id 0x0001
Realtek Bluetooth :Chip id 0x0002
Realtek Bluetooth :Chip id 0x0003
Realtek Bluetooth :Patch length 0x81b8
Realtek Bluetooth :Start offset 0x00004980
Realtek Bluetooth :Svn version:    20318
Realtek Bluetooth :Coexistence: BTCOEX_20180125-2323

Realtek Bluetooth :FW  exists, Config file  exists
Realtek Bluetooth :Total len 33256 for fwc
Realtek Bluetooth :baudrate in change speed command: 0x02 0x80 0x92 0x04
Realtek Bluetooth :Receive cmd complete event of command: fc17
Realtek Bluetooth :Received cc of vendor change baud
Realtek Bluetooth :Final speed 1500000
Realtek Bluetooth :end_idx: 131, lp_len: 244, additional pkts: 0

Realtek Bluetooth :Start downloading...
Realtek Bluetooth :Send last pkt
Realtek Bluetooth :Enable host hw flow control
Realtek Bluetooth :h5_hci_reset: Issue hci reset cmd
Realtek Bluetooth :Receive cmd complete event of command: 0c03
Realtek Bluetooth :Received cc of hci reset cmd
Realtek Bluetooth :Init Process finished
[   43.857766] Bluetooth: HCI UART driver ver 2.3
[   43.862265] Bluetooth: HCI UART protocol H4 registered
[   43.867623] Bluetooth: HCI UART protocol BCSP registered
[   43.873240] Bluetooth: HCI UART protocol LL registered
[   43.878465] Bluetooth: HCI UART protocol ATH3K registered
[   43.883983] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   43.890604] Bluetooth: HCI UART protocol Intel registered
[   43.896317] Bluetooth: HCI UART protocol Broadcom registered
[   43.902191] Bluetooth: HCI UART protocol QCA registered
[   43.907516] Bluetooth: HCI UART protocol AG6XX registered
[   43.913019] Bluetooth: HCI UART protocol Marvell registered
Realtek Bluetooth :Realtek Bluetooth post process
Realtek Bluetooth :Device setup complete

搞定， 从全志的D1哪吒 SDK扣 固件和 rtk_attach出来就完事了！

https://www.cnblogs.com/tid-think/p/13100009.html

正常用 rtk_hciattach 是这样的：

root@airfly:/# rtk_hciattach -n -s 115200 /dev/ttyS1 rtk_h5 & 
root@airfly:/# Realtek Bluetooth init uart with init speed:115200, type:HCI UART H5
Realtek Bluetooth :Realtek hciattach version 3.1.0099684.20181218-163903 

Realtek Bluetooth :Use epoll
Realtek Bluetooth :[SYNC] Get SYNC Resp Pkt
Realtek Bluetooth :[CONFIG] Get SYNC pkt
Realtek Bluetooth :[CONFIG] Get CONFG pkt
Realtek Bluetooth :[CONFIG] Get CONFG resp pkt
Realtek Bluetooth :dic is 1, cfg field 0x14
Realtek Bluetooth :H5 init finished

Realtek Bluetooth :Realtek H5 IC
Realtek Bluetooth :Receive cmd complete event of command: 1001
Realtek Bluetooth :HCI Version 0x08
Realtek Bluetooth :HCI Revision 0x000c
Realtek Bluetooth :LMP Subversion 0x8821
Realtek Bluetooth :Receive cmd complete event of command: fc6d
Realtek Bluetooth :Read ROM version 01
Realtek Bluetooth :LMP Subversion 0x8821
Realtek Bluetooth :EVersion 1
Realtek Bluetooth :IC: RTL8821CS
Realtek Bluetooth :Firmware/config: rtl8821cs_fw, rtl8821cs_config
Realtek Bluetooth :Couldnt access customer BT MAC file /opt/bdaddr
Realtek Bluetooth :Couldnt open extra config /opt/rtk_btconfig.txt, No such file or directory
Realtek Bluetooth :Original Cfg len 25
Realtek Bluetooth :Config baudrate: 04928002
Realtek Bluetooth :uart flow ctrl: 0
Realtek Bluetooth :55 ab 23 87 13 00 0c 00 10 02 80 92 04 50 c5 ea
Realtek Bluetooth :19 e1 1b fd af 5b 01 a4 0b
Realtek Bluetooth :Cfg length 25
Realtek Bluetooth :Vendor baud from Config file: 04928002
Realtek Bluetooth :Load FW /lib/firmware/rtlbt/rtl8821cs_fw OK, size 40448
Realtek Bluetooth :rtb_get_fw_project_id: opcode 0, len 1, data 10
Realtek Bluetooth :FW version 0xaa7b2a21, Patch num 2
Realtek Bluetooth :Chip id 0x0001
Realtek Bluetooth :Chip id 0x0002
Realtek Bluetooth :Patch length 0x6078
Realtek Bluetooth :Start offset 0x00003d40
Realtek Bluetooth :Svn version:    20445
Realtek Bluetooth :Coexistence: BTCOEX_20180125-2828

Realtek Bluetooth :FW  exists, Config file  exists
Realtek Bluetooth :Total len 24721 for fwc
Realtek Bluetooth :baudrate in change speed command: 0x02 0x80 0x92 0x04
Realtek Bluetooth :Receive cmd complete event of command: fc17
Realtek Bluetooth :Received cc of vendor change baud
Realtek Bluetooth :Final speed 1500000
Realtek Bluetooth :end_idx: 98, lp_len: 25, additional pkts: 1

Realtek Bluetooth :Start downloading...
Realtek Bluetooth :Last packet 227
Realtek Bluetooth :Send last pkt
Realtek Bluetooth :Disable host hw flow control
Realtek Bluetooth :h5_hci_reset: Issue hci reset cmd
Realtek Bluetooth :Receive cmd complete event of command: 0c03
Realtek Bluetooth :Received cc of hci reset cmd
Realtek Bluetooth :Init Process finished
Realtek Bluetooth post process
Device setup complete

可是我的是这样的：

# rtk_hciattach -n -s 115200 /dev/ttyS1 rtk_h5
Realtek Bluetooth :Realtek Bluetooth init uart with init speed:115200, type:HCI UART H5
Realtek Bluetooth :Realtek hciattach ve[   32.487000] vcc3v0: disabling
rsion 3.1.8905594.20200602-140152

Realtek Bluetooth :Use epo[   32.491457] vcc5v0: disabling
ll
Realtek Bluetooth :[SYNC] Get SYNC Resp Pkt
Realtek Bluetooth :[CONFIG] Get SYNC pkt
Realtek Bluetooth :[CONFIG] Get CONFG pkt
Realtek Bluetooth :[CONFIG] Get CONFG resp pkt
Realtek Bluetooth :dic is 1, cfg field 0x14
Realtek Bluetooth :H5 init finished

Realtek Bluetooth :Realtek H5 IC
Realtek Bluetooth :Receive cmd complete event of command: 1001
Realtek Bluetooth :HCI Version 0x08
Realtek Bluetooth :HCI Revision 0x000d
Realtek Bluetooth :LMP Subversion 0x8723
Realtek Bluetooth :Receive cmd complete event of command: fc6d
Realtek Bluetooth :Read ROM version 02
Realtek Bluetooth :LMP Subversion 0x8723
Realtek Bluetooth :EVersion 2
Realtek Bluetooth :IC: RTL8723DS
Realtek Bluetooth :Firmware/config: rtl8723d_fw, rtl8723d_config
Realtek Bluetooth :Couldnt open extra config /opt/rtk_btconfig.txt, No such file or directory
Realtek Bluetooth :Couldnt access customer BT MAC file /opt/bdaddr
Realtek Bluetooth :Origin cfg len 10
Realtek Bluetooth :55 ab 23 87 04 00 d9 00 01 0f
Realtek Bluetooth :Vendor baud from Config file: 00000000
Realtek Bluetooth :New cfg len 10
Realtek Bluetooth :55 ab 23 87 04 00 d9 00 01 0f
Realtek Bluetooth :Load FW /lib/firmware/rtlbt/rtl8723d_fw OK, size 52080
Realtek Bluetooth :rtb_get_fw_project_id: opcode 0, len 1, data 9
Realtek Bluetooth :FW version 0x828a96f1, Patch num 3
Realtek Bluetooth :Chip id 0x0001
Realtek Bluetooth :Chip id 0x0002
Realtek Bluetooth :Chip id 0x0003
Realtek Bluetooth :Patch length 0x81e8
Realtek Bluetooth :Start offset 0x00004940
Realtek Bluetooth :Svn version:    22030
Realtek Bluetooth :Coexistence: BTCOEX_20190509-2f2f

Realtek Bluetooth :FW  exists, Config file  exists
Realtek Bluetooth :Total len 33266 for fwc
Realtek Bluetooth :No baud from Config file, set baudrate: 115200, 0x0252c014
Realtek Bluetooth :end_idx: 132, lp_len: 2, additional pkts: 0

Realtek Bluetooth :Start downloading...
Realtek Bluetooth :Send last pkt
Realtek Bluetooth :Disable host hw flow control
Realtek Bluetooth WARN: Patch pkt trans timeout, re-trans
Realtek Bluetooth WARN: Patch pkt trans timeout, re-trans
Realtek Bluetooth WARN: Patch pkt trans timeout, re-trans
Realtek Bluetooth WARN: Patch pkt trans timeout, re-trans
Realtek Bluetooth ERROR: h5_download_patch: Retransmission exhausts
#
#
#

手绘图纸

嗯，感谢楼主分享，我的哪吒就是这么做debian rootfs 的。

arduino代码 esp8266_servo_arm.rar

linux——ekho7.7.1（最新版）语音合成库的安装与编译
前言

TTS技术，TTS是Text To Speech的缩写，即“从文本到语音”。它将计算机自己产生的、或外部输入的文字信息转变为可以听得懂的、流利的汉语口语（或者其他语言语音）输出的技术，隶属于语音合成（SpeechSynthesis）。

Ekho（余音）是一个免费、开源的中文语音合成（TTS）软件。它目前支持粤语、普通话（国语）、广东台山话、诏安客语、藏语、雅言（中国古代通用语）和韩语（试验中），英语则通过eSpeak或Festival间接实现。Ekho支持Linux、Windows和Android平台。

下载源码包
下载地址：http://www.eguidedog.net/ekho.php

Ekho支持Linux和Windows平台，使用时需要同时下载源文件和声音数据，解压到"jyutping"或"pinyin"。（以jyutping开头的声音数据是粤语，而以pinyin开头的声音数据是国语。文件名中的44100和16000表示的是采样率。采样率高意味着声音质量高。）

支持库的安装

sudo apt-get install libespeak-dev libsndfile1-dev libpulse-dev \
libncurses5-dev libestools-dev festival-dev libvorbis-dev \
libmp3lame-dev libdotconf-dev texinfo

配置、编译及安装：
如果需要阅读英语，则需要配置编译Festival，在configure选项中加上–enable-festival，如果需要编译speech-dispatcher API和支持屏幕阅读的话，就加上–enable-speechd。（speech-dispatcher是一个平台独立的语音合成API，其框架是基于client/server模型的，两者通信是通过TCP连接使用Speech Synthesis Independent Protocol (SSIP)协议通信或者接口库通信的。）
解压源码包：
$ tar xvf ekho-7.7.1.tar.xz

源码包里的主要文件如下;
speechd-api：speech-dispatcher API（平台独立的语音合成API）；
sonic：一个语音变速的算法实现；
ekho-data：ekho的字典文件和声音数据，TTS是通过文本分析，再查找字典，找到对应的声音数据，然后通过语音合成出来的；
Utfcpp：处理Unicode编码字符串的库。
src：（ekho的主要实现）和lib（上面说的这几部分的静态链接库*.a）了，就没什么特别的了。

编译安装:

$ ./configure
$ make
$ sudo make install

安装后，ekho这个可执行文件和声音数据ekho-data都会复制到系统目录下。但是好像头文件（除ekho.h外）和库等就没有复制进去，所以编程链接时需要注意指定位置。

指令使用及测试
ekho指令的使用方法如下：

Ekho text-to-speech engine.
Version: 7.7.1

Syntax: ekho [option] [text]
-v, --voice=VOICE
        Specified language or voice. ('Cantonese', 'Mandarin', 'Toisanese', 'Hakka', 'Tibetan', 'Ngangien' and 'Hangul' are available now. Mandarin is the default language.)
-l, --symbol
        List phonetic symbol of text. Characters' symbols are splited by space.
-f, --file=FILE
        Speak text file. ('-' for stdin)
-o, --output=FILE
        Output to file.
-t, --type=OUTPUT_TYPE
        Output type: wav(default), ogg or mp3
-p, --pitch=PITCH_DELTA
        Set delta pitch. Value range from -100 to 100 (percent)
-a, --volume=VOLUME_DELTA
        Set delta volume. Value range from -100 to 100 (percent)
-s, --speed=SPEED
        Set delta speed. Value range from -50 to 300 (percent)
--english-speed=SPEED
  Set English delta speed. Value range from -50 to 150 (percent)
--server
        Start Ekho TTS server.
--request=TEXT
        Send request to Ekho TTS server.
--port
        Set server port. Default is 2046.
--version
        Show version number.
-h, --help
        Display this help message.

Please report bugs to Cameron Wong (hgneng at gmail.com)

如上，-v是选择语种，-p是设置音高（与声音的频率相关），-a是设置音量，-s是设置语速。
下面来测试一个很魔性的声音，当时测试乐了半天，O(∩_∩)O哈哈~

ekho -p 200 "改革春风吹满地 中国人民真争气"

1
编程举例，依据网站（http://www.eguidedog.net/doc/doc_programme_with_ekho.php） 的指导一个测试例子try.cpp。

try.cpp文件：

#include "config.h"
#include "ekho.h"

using namespace ekho;

int main ( int argc , char **argv)
{
        Ekho wong("Cantonese");
        wong.blockSpeak("改革春风吹满地 中国人民真争气");

        return 0;
}

编译的话，因为依赖的库比较多，所以最好在该目录下写个sheel脚本build.sh，如下：

g++ try.cpp libekho.a -pthread \
  -I. -Iutfcpp/source -Isonic -lsndfile \
  `pkg-config --libs libpulse-simple` `pkg-config --cflags libpulse-simple`

运行./build.sh后报错了：

从上面的错误提示可知，缺少espeak库和musicxml库，添加-lespeak和./libmusicxml/libmusicxml2.a即可。

g++ try.cpp libekho.a ./libmusicxml/libmusicxml2.a -pthread \
  -I. -Iutfcpp/source -Isonic -lsndfile -lespeak\
  `pkg-config --libs libpulse-simple` `pkg-config --cflags libpulse-simple`

运行a.out，播放了测试程序中文本对应的语音。

————————————————

原文： https://blog.csdn.net/u014470361/article/details/84771720

http://www.eguidedog.net/ekho.php

试了一下 ekho 在线文字转语音引擎，感觉效果好尴尬。

比起百度和讯飞，效果不是差一点点。

@xiaowenge 在 高铁司机的奇葩要求，每隔30秒踩一下踏板，人肉看门狗，如果没踩踏板（喂狗），系统认为司机睡着了，那么列车自动刹车。 中说：

所以有时候高铁临时停车，是因为司机睡着了？

这种应该是执行调度指令，让其他车(如快车)先跑39米。

楼主你好，原理我已经学会了，哪里领高铁？