@away123456 内核部分spinand没有识别出来，你自己看下内核部分的配置
W
wyljkl 发布的帖子
-
回复: v851se切换spinand文件系统起不来Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)发布在 V853系列-AI视觉
-
回复: t113-s3 sdk中有两个版本的bluez工具，怎么切换呢？发布在 Linux
@xlbwxbl 可以切换了，修改makefile，然后需要去掉patch文件夹的patch，里面patch内容不匹配
-
t113-s3 sdk中有两个版本的bluez工具，怎么切换呢？发布在 Linux
t113-s3的sdk中带了两个版本的bluez，默认编译的是5.54，但是我现在想要使用5.64，要怎么修改配置呢？
我直接修改makefile中的版本，编译会报错，有改过的麻烦指点一下，非常感谢
-
t113-s3 调试 aic8800dc 模组，使用蓝牙报错！！！发布在 Linux
root@TinaLinux:/mnt/UDISK# insmod aic8800_bsp.ko [ 38.167214] aicbsp_init [ 38.170146] RELEASE_DATE:2024_0914_ad9d7749 [ 38.174978] aicbsp_resv_mem_init root@TinaLinux:/mnt/UDISK# insmod aic8800_fdrv.ko [ 42.611009] AICWFDBG(LOGTRACE) >>> rwnx_mod_init() [ 42.616471] AICWFDBG(LOGINFO) rwnx v6.4.3.0 - - 241c091M (master) [ 42.623322] AICWFDBG(LOGINFO) RELEASE_DATE:2024_0914_ad9d7749 [ 42.629960] AICWFDBG(LOGTRACE) rwnx_init_cmd_array Enter [ 42.636131] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[0]:a97386e8 [ 42.643850] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[1]:816dd046 [ 42.651559] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[2]:a4df5e41 [ 42.659280] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[3]:0e391626 [ 42.666999] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[4]:89195abe [ 42.674717] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[5]:10450b6d [ 42.682436] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[6]:bb136311 [ 42.690145] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[7]:91b45439 [ 42.697871] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[8]:0bc294b1 [ 42.705592] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[9]:11d8e768 [ 42.713309] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[10]:51f87f41 [ 42.721116] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[11]:28d9570b [ 42.728932] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[12]:4e425012 [ 42.736752] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[13]:dc1f0d80 [ 42.744579] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[14]:63776d09 [ 42.752401] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[15]:16d17bc4 [ 42.760208] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[16]:9f5e35af [ 42.768026] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[17]:2c69b4f5 [ 42.775843] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[18]:6c6c99a7 [ 42.783658] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[19]:526176b4 [ 42.791464] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[20]:41e6fceb [ 42.799286] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[21]:a6c8f617 [ 42.807104] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[22]:490997c9 [ 42.814919] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[23]:b4c0af91 [ 42.822736] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[24]:ef0a52d8 [ 42.830542] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[25]:97a1434f [ 42.838358] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[26]:e952635d [ 42.846174] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[27]:00e30592 [ 42.853989] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[28]:a8784a44 [ 42.861805] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[29]:6df42f23 [ 42.869611] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[30]:1877147f [ 42.877430] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[31]:a8612c81 [ 42.885253] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[32]:b84c5331 [ 42.893077] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[33]:8e6830a6 [ 42.900883] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[34]:fb93338c [ 42.908701] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[35]:7fa96c82 [ 42.916518] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[36]:4b8fbd49 [ 42.924333] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[37]:f2600f97 [ 42.932149] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[38]:29af9a9d [ 42.939956] AICWFDBG(LOGTRACE) rwnx_init_cmd_array cmd_queue[39]:eac856f9 [ 42.947771] AICWFDBG(LOGTRACE) rwnx_init_cmd_array Exit [ 42.953833] aicbsp: aicbsp_set_subsys, subsys: AIC_WIFI, state to: 1 [ 42.960957] aicbsp: aicbsp_set_subsys, power state change to 1 dure to AIC_WIFI [ 42.969161] aicbsp: aicbsp_platform_power_on [ 42.973961] sunxi-rfkill soc@3000000:rfkill@0: bus_index: 1 [ 43.040322] sunxi-rfkill soc@3000000:rfkill@0: wlan power on success [ 43.097519] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B [ 43.108760] sunxi-mmc 4021000.sdmmc: no vqmmc,Check if there is regulator [ 43.128918] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 43.153965] sunxi-mmc 4021000.sdmmc: smc 0 p1 err, cmd 52, RTO !! [ 43.161629] sunxi-mmc 4021000.sdmmc: smc 0 p1 err, cmd 52, RTO !! [ 43.168486] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 43.183077] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 43.201308] mmc0: queuing unknown CIS tuple 0x10 (5 bytes) [ 43.212779] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 43.224725] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B [ 43.236756] mmc0: queuing unknown CIS tuple 0x10 (5 bytes) [ 43.244388] mmc0: new SDIO card at address 76bb [ 43.272064] aicbsp: aicbsp_sdio_probe:1 vid:0xC8A1 did:0xC08D [ 43.282955] aicbsp: aicbsp_sdio_probe:2 vid:0xC8A1 did:0xC18D [ 43.289505] aicbsp: aicbsp_sdio_probe after replace:1 [ 43.295255] AICWFDBG(LOGINFO) aicwf_sdio_chipmatch USE AIC8800DC [ 43.302110] the device is PRODUCT_ID_AIC8800DC [ 43.307198] aicbsp: aicbsp_get_feature, set FEATURE_SDIO_CLOCK 50 MHz [ 43.314428] aicbsp: aicwf_sdio_reg_init [ 43.318949] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B [ 43.330990] aicbsp: Set SDIO Clock 50 MHz [ 43.337021] AICWFDBG(LOGINFO) btenable = 1 [ 43.342044] AICWFDBG(LOGINFO) IS_CHIP_ID_H [ 43.346917] AICWFDBG(LOGINFO) aicbsp: aicbsp_driver_fw_init, chip rev: 7 [ 43.354498] rwnx_load_firmware :firmware path = /etc/fw_patch_table_8800dc_u02h.bin [ 43.396454] file md5:43ecb08df5fe83ad0ffe0dbab53ef837 [ 43.402387] AICWFDBG(LOGDEBUG) aicbt_patch_info_unpack head_t->len:4 base_len:4 [ 43.410806] AICWFDBG(LOGDEBUG) aicbt_patch_info_unpack memcpy_len:4 [ 43.418050] AICWFDBG(LOGDEBUG) aicbt_patch_info_unpack adid_addrinf:10dc94 addr_adid:100f60 [ 43.427633] rwnx_plat_bin_fw_upload_android [ 43.432333] rwnx_load_firmware :firmware path = /etc/fw_adid_8800dc_u02h.bin [ 43.440671] file md5:f00fbd9fe6509b786018967936203dd3 [ 43.447177] rwnx_plat_bin_fw_upload_android [ 43.451984] rwnx_load_firmware :firmware path = /etc/fw_patch_8800dc_u02h.bin [ 43.460659] file md5:1fa2f80f0b6b7b22338b9c3533d69883 [ 43.475588] aicbt_patch_table_load bt btmode[1]:1 [ 43.481061] aicbt_patch_table_load bt uart_baud[1]:1500000 [ 43.487424] aicbt_patch_table_load bt uart_flowctrl[1]:1 [ 43.493583] aicbt_patch_table_load bt lpm_enable[1]:0 [ 43.499440] aicbt_patch_table_load bt tx_pwr[1]:28463 [ 43.509074] aicbsp: bt patch version: - Jul 11 2024 10:36:50 - git 7b2cd39 [ 43.516901] ############ aicwifi_init begin [ 43.522112] AICWFDBG(LOGINFO) chip_id=c7, chip_sub_id=2!! [ 43.528357] AICWFDBG(LOGDEBUG) set_bbpll_config rd_mem_addr_cfm.memdata:8 [ 43.536189] AICWFDBG(LOGINFO) set_bbpll_config Crystal not provided by CPU [ 43.544311] AICWFDBG(LOGDEBUG) [0x40500010]=6 [ 43.553979] ############ system_config_8800dc done [ 43.559352] AICWFDBG(LOGTRACE) >>> rwnx_plat_patch_load() [ 43.565424] AICWFDBG(LOGINFO) testmode=0 [ 43.569819] AICWFDBG(LOGINFO) rwnx_plat_patch_loading [ 43.575489] h_u02 is loaing ############### [ 43.580176] rwnx_plat_bin_fw_upload_android [ 43.584873] rwnx_load_firmware :firmware path = /etc/fmacfw_patch_8800dc_h_u02.bin [ 43.594170] file md5:9ace5e22880dc408045ad1f5c889271b [ 43.606152] AICWFDBG(LOGINFO) dpd calib & write [ 43.611239] aicwf_dpd_calib_8800dc [ 43.615279] AICWFDBG(LOGERROR) misc_ram_addr=120ebc [ 43.621480] AICWFDBG(LOGTRACE) bit_mask:aef414e2,b0a4bf37,7fc4d938,6d8ab0c9 [ 43.629311] rwnx_plat_bin_fw_upload_android [ 43.634018] rwnx_load_firmware :firmware path = /etc/fmacfw_calib_8800dc_h_u02.bin [ 43.643460] file md5:342855cf657b97dcb97594f4f4a1cbee [ 43.657148] AICWFDBG(LOGINFO) Start app: 00130009, 4 [ 43.923171] ############ rwnx_plat_patch_load done [ 43.929287] AICWFDBG(LOGINFO) wifisetting_cfg_addr=11019c, ldpc_cfg_addr=120980, agc_cfg_addr=120180, txgain_cfg_addr=120000 [ 43.943970] ### Upload fmacfw_patch_tbl_8800dc_h_u02.bin [ 43.950028] rwnx_load_firmware :firmware path = /etc/fmacfw_patch_tbl_8800dc_h_u02.bin [ 43.959339] file md5:a5731a82178f302b3c7744a6417ae9be [ 43.965121] tbl size = 720 [ 43.968249] AICWFDBG(LOGINFO) FMACFW_PATCH_TBL_8800DC_U02_DESCRIBE_BASE = 187c00 [ 43.976930] di Aug 05 2024 12:22:48 - g640d25c [ 43.976936] patch_tbl: 110890 180c75 [ 43.986343] patch_tbl: 1108f4 182f09 [ 43.990736] patch_tbl: 11087c 180cd5 [ 43.995155] patch_tbl: 1107e4 181565 [ 43.999545] patch_tbl: 110578 1840e1 [ 44.003955] patch_tbl: 110840 181789 [ 44.008344] patch_tbl: 1104fc 18191d [ 44.012757] patch_tbl: 1106e4 1858dd [ 44.017152] patch_tbl: 11063c 185355 [ 44.021538] patch_tbl: 110640 1854fd [ 44.025951] patch_tbl: 1105f8 1856c9 [ 44.030336] patch_tbl: 110860 183a45 [ 44.034740] patch_tbl: 110494 181951 [ 44.039133] patch_tbl: 110740 18197d [ 44.043548] patch_tbl: 1107c0 181a0d [ 44.047937] patch_tbl: 110528 185af5 [ 44.052339] patch_tbl: 110530 1858c9 [ 44.056724] patch_tbl: 11055c 181a59 [ 44.061114] patch_tbl: 1107a0 181f71 [ 44.065519] patch_tbl: 110654 183aa1 [ 44.069907] patch_tbl: 110818 18352d [ 44.074337] patch_tbl: 110824 183575 [ 44.078729] patch_tbl: 1108cc 18236d [ 44.083146] patch_tbl: 1108d0 181f75 [ 44.087537] patch_tbl: 110630 1824e9 [ 44.091938] patch_tbl: 110758 184145 [ 44.096330] patch_tbl: 1106e0 184189 [ 44.100724] patch_tbl: 110864 18443d [ 44.105136] patch_tbl: 110520 18447d [ 44.109555] patch_tbl: 1106d0 1845c5 [ 44.113960] patch_tbl: 1108fc 184619 [ 44.118351] patch_tbl: 110574 184591 [ 44.122764] patch_tbl: 1106bc 184725 [ 44.127155] patch_tbl: 110558 1848fd [ 44.131541] patch_tbl: 110590 181a89 [ 44.135947] patch_tbl: 1104f4 18267d [ 44.140339] patch_tbl: 110500 181e91 [ 44.144745] patch_tbl: 1106dc 184aad [ 44.149133] patch_tbl: 110518 184af5 [ 44.153541] patch_tbl: 110568 184b91 [ 44.157927] patch_tbl: 110648 184bbd [ 44.162340] patch_tbl: 110660 184dc1 [ 44.166727] patch_tbl: 110688 184f35 [ 44.171121] patch_tbl: 11049c 1826ed [ 44.175523] patch_tbl: 11073c 182701 [ 44.179917] patch_tbl: 11041c 185929 [ 44.184331] patch_tbl: 1103f0 185a99 [ 44.188718] patch_tbl: 1100c4 184725 [ 44.193126] patch_tbl: 110054 184dc1 [ 44.197521] patch_tbl: 110f34 1836ed [ 44.201934] patch_tbl: 110f04 183e45 [ 44.206320] patch_tbl: 110de4 183e65 [ 44.210717] patch_tbl: 110e04 184045 [ 44.215123] patch_tbl: 110e6c 183fd9 [ 44.219512] patch_tbl: 110ab0 1840a9 [ 44.223925] patch_tbl: 110dcc 183f69 [ 44.228315] patch_tbl: 1100e0 183f85 [ 44.232722] patch_tbl: 110dd4 184219 [ 44.237107] patch_tbl: 110e5c 183db5 [ 44.241501] patch_tbl: 110b00 1831dd [ 44.245914] patch_tbl: 110ae8 181e09 [ 44.250309] patch_tbl: 110aa0 1844e5 [ 44.254712] patch_tbl: 110e64 184559 [ 44.259098] patch_tbl: 110f80 184a49 [ 44.263513] patch_tbl: 11148c 184991 [ 44.267896] patch_tbl: 110b84 184bbd [ 44.272300] patch_tbl: 110d6c 18531d [ 44.276685] patch_tbl: 40030084 187c80 [ 44.281267] patch_tbl: 40030000 2a6b8 [ 44.285782] patch_tbl: 40030004 4d9d0 [ 44.290266] patch_tbl: 187c80 47706008 [ 44.294867] patch_tbl: 187c84 d0332b00 [ 44.299457] patch_tbl: 40030080 3 [ 44.303576] patch_tbl: 4010001c 0 [ 44.307680] ############ aicwf_patch_config_8800dc done [ 44.313554] AICWFDBG(LOGINFO) Read FW mem: 00120000 [ 44.319216] AICWFDBG(LOGINFO) cfm: [00120000] = 00ffd888 [ 44.325191] AICWFDBG(LOGINFO) Start app: 00120000, 5 [ 44.338495] AICWFDBG(LOGDEBUG) aicwf_sdio_probe:1 [ 44.343790] AICWFDBG(LOGDEBUG) Class=7 [ 44.347989] AICWFDBG(LOGDEBUG) sdio vendor ID: 0xc8a1 [ 44.353659] AICWFDBG(LOGDEBUG) sdio device ID: 0xc08d [ 44.359320] AICWFDBG(LOGDEBUG) Function#: 1 [ 44.364017] AICWFDBG(LOGINFO) aicwf_sdio_chipmatch USE AIC8800DC [ 44.370850] aicbsp: aicbsp_get_feature, set FEATURE_SDIO_CLOCK 50 MHz [ 44.371696] aicbsp: sdio_err:<aicwf_sdio_bus_pwrctl,1402>: bus down [ 44.378079] aicsdio: aicwf_sdio_reg_init [ 44.389618] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B [ 44.401518] AICWFDBG(LOGINFO) Set SDIO Clock 50 MHz [ 44.417156] aicwf_prealloc_init enter [ 44.421725] pre alloc rxbuff list len: 30 [ 44.426250] aicbsp: aicbsp_resv_mem_alloc_skb, alloc resv_mem_txdata succuss, id: 0, size: 98304 [ 44.436327] AICWFDBG(LOGINFO) sdio_bustx_thread the policy of current thread is:1 [ 44.441793] AICWFDBG(LOGINFO) sdio_busrx_thread the policy of current thread is:1 [ 44.444774] AICWFDBG(LOGINFO) sdio_bustx_thread the rt_priority of current thread is:1 [ 44.453138] AICWFDBG(LOGINFO) sdio_busrx_thread the rt_priority of current thread is:1 [ 44.453143] AICWFDBG(LOGINFO) sdio_busrx_thread the current pid is:1224 [ 44.462033] AICWFDBG(LOGINFO) sdio_bustx_thread the current pid is:1223 [ 44.485800] AICWFDBG(LOGTRACE) >>> rwnx_platform_init() [ 44.491722] AICWFDBG(LOGTRACE) >>> rwnx_cfg80211_init() [ 44.497582] aicbsp: aicbsp_get_feature, set FEATURE_SDIO_CLOCK 50 MHz [ 44.504823] AICWFDBG(LOGINFO) rwnx_cfg80211_init sizeof(struct rwnx_hw):16360 [ 44.513085] AICWFDBG(LOGTRACE) >>> rwnx_init_aic() [ 44.518458] AICWFDBG(LOGTRACE) >>> rwnx_cmd_mgr_init() [ 44.524373] tcp_ack_init [ 44.527316] AICWFDBG(LOGINFO) aicwf_prealloc_txq_alloc size is diff will to be kzalloc [ 44.536423] AICWFDBG(LOGINFO) aicwf_prealloc_txq_alloc txq kzalloc successful [ 44.544759] AICWFDBG(LOGTRACE) >>> rwnx_send_dbg_mem_read_req() [ 44.551405] AICWFDBG(LOGTRACE) rwnx_send_msg (1025)DBG_MEM_READ_CFM reqcfm:1 in_irq:0 in_softirq:0 in_atomic:0 [ 44.562751] AICWFDBG(LOGTRACE) rwnx_cmd_malloc get cmd_array[0]:a97386e8 [ 44.570948] AICWFDBG(LOGDEBUG) rwnx_rx_handle_msg msg->id:0x401 [ 44.577874] AICWFDBG(LOGTRACE) rwnx_cmd_free cmd_array[0]:a97386e8 [ 44.585067] AICWFDBG(LOGTRACE) >>> rwnx_send_dbg_mem_read_req() [ 44.591739] AICWFDBG(LOGTRACE) rwnx_send_msg (1025)DBG_MEM_READ_CFM reqcfm:1 in_irq:0 in_softirq:0 in_atomic:0 [ 44.603087] AICWFDBG(LOGTRACE) rwnx_cmd_malloc get cmd_array[0]:a97386e8 [ 44.610976] AICWFDBG(LOGDEBUG) rwnx_rx_handle_msg msg->id:0x401 [ 44.617879] AICWFDBG(LOGTRACE) rwnx_cmd_free cmd_array[0]:a97386e8 [ 44.625025] AICWFDBG(LOGINFO) FDRV chip_id=c7, chip_sub_id=2!! [ 44.631575] AICWFDBG(LOGTRACE) >>> rwnx_platform_on() [ 44.637251] AICWFDBG(LOGINFO) userconfig file path:aic_userconfig_8800dc.txt [ 44.645360] AICWFDBG(LOGINFO) ### Load file aic_userconfig_8800dc.txt [ 44.652592] AICWFDBG(LOGINFO) rwnx_load_firmware :firmware path = /etc/aic_userconfig_8800dc.txt [ 44.662850] AICWFDBG(LOGINFO) file md5:159af09b93ce2f8f042cb57d287e0df2 [ 44.670369] AICWFDBG(LOGINFO) ### Load file done: aic_userconfig_8800dc.txt, size=1056 [ 44.679268] AICWFDBG(LOGINFO) rwnx_plat_userconfig_parsing2: AIC USERCONFIG 2022/0803/1707 [ 44.688646] AICWFDBG(LOGINFO) rwnx_plat_userconfig_parsing2: txpwr_lvl [ 44.696074] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=enable value=1 [ 44.704184] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11b_11ag_1m_2g4 value=20 [ 44.713664] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11b_11ag_2m_2g4 value=20 [ 44.723140] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11b_11ag_5m5_2g4 value=20 [ 44.732713] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11b_11ag_11m_2g4 value=20 [ 44.742287] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11b_11ag_6m_2g4 value=20 [ 44.751771] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11b_11ag_9m_2g4 value=20 [ 44.761236] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11b_11ag_12m_2g4 value=20 [ 44.770811] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11b_11ag_18m_2g4 value=20 [ 44.780384] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11b_11ag_24m_2g4 value=18 [ 44.789957] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11b_11ag_36m_2g4 value=18 [ 44.799530] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11b_11ag_48m_2g4 value=16 [ 44.809103] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11b_11ag_54m_2g4 value=16 [ 44.818680] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11n_11ac_mcs0_2g4 value=20 [ 44.828351] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11n_11ac_mcs1_2g4 value=20 [ 44.838021] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11n_11ac_mcs2_2g4 value=20 [ 44.847691] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11n_11ac_mcs3_2g4 value=20 [ 44.857361] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11n_11ac_mcs4_2g4 value=18 [ 44.867032] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11n_11ac_mcs5_2g4 value=18 [ 44.876702] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11n_11ac_mcs6_2g4 value=16 [ 44.886373] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11n_11ac_mcs7_2g4 value=16 [ 44.896050] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11n_11ac_mcs8_2g4 value=16 [ 44.905726] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11n_11ac_mcs9_2g4 value=16 [ 44.915403] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11ax_mcs0_2g4 value=20 [ 44.924683] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11ax_mcs1_2g4 value=20 [ 44.933963] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11ax_mcs2_2g4 value=20 [ 44.943244] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11ax_mcs3_2g4 value=20 [ 44.952524] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11ax_mcs4_2g4 value=18 [ 44.961805] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11ax_mcs5_2g4 value=18 [ 44.971076] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11ax_mcs6_2g4 value=16 [ 44.980356] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11ax_mcs7_2g4 value=16 [ 44.989637] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11ax_mcs8_2g4 value=16 [ 44.998918] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11ax_mcs9_2g4 value=16 [ 45.008199] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11ax_mcs10_2g4 value=15 [ 45.017582] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=lvl_11ax_mcs11_2g4 value=15 [ 45.026964] AICWFDBG(LOGINFO) rwnx_plat_userconfig_parsing2: txpwr_ofst [ 45.034526] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=ofst_enable value=0 [ 45.043129] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=ofst_chan_1_4 value=0 [ 45.051923] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=ofst_chan_5_9 value=0 [ 45.060706] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=ofst_chan_10_13 value=0 [ 45.069694] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=ofst_chan_36_64 value=0 [ 45.078682] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=ofst_chan_100_120 value=0 [ 45.087865] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=ofst_chan_122_140 value=0 [ 45.097048] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=ofst_chan_142_165 value=0 [ 45.106230] AICWFDBG(LOGINFO) rwnx_plat_userconfig_parsing2: xtal cap [ 45.113563] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=xtal_enable value=0 [ 45.122161] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=xtal_cap value=24 [ 45.130554] AICWFDBG(LOGINFO) rwnx_plat_nvram_set_value:command=xtal_cap_fine value=31 [ 45.139444] AICWFDBG(LOGINFO) userconfig download complete [ 45.139444] [ 45.147266] AICWFDBG(LOGTRACE) rwnx_send_msg (124)MM_SET_STACK_START_CFM reqcfm:1 in_irq:0 in_softirq:0 in_atomic:0 [ 45.159085] AICWFDBG(LOGTRACE) rwnx_cmd_malloc get cmd_array[0]:a97386e8 [ 45.167332] AICWFDBG(LOGDEBUG) rwnx_rx_handle_msg msg->id:0x7c [ 45.174119] AICWFDBG(LOGTRACE) rwnx_cmd_free cmd_array[0]:a97386e8 [ 45.181245] AICWFDBG(LOGINFO) is 5g support = 0, vendor_info = 0x00 [ 45.188293] AICWFDBG(LOGTRACE) rwnx_send_msg (129)MM_GET_FW_VERSION_CFM reqcfm:1 in_irq:0 in_softirq:0 in_atomic:0 [ 45.200011] AICWFDBG(LOGTRACE) rwnx_cmd_malloc get cmd_array[0]:a97386e8 [ 45.207912] AICWFDBG(LOGDEBUG) rwnx_rx_handle_msg msg->id:0x81 [ 45.214692] AICWFDBG(LOGTRACE) rwnx_cmd_free cmd_array[0]:a97386e8 [ 45.221841] AICWFDBG(LOGINFO) Firmware Version: zh Aug 08 2023 20:31:22 - g41bc49e [ 45.230430] AICWFDBG(LOGTRACE) >>> rwnx_send_txpwr_lvl_req() [ 45.236787] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:enable:1 [ 45.244602] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11b_11ag_1m_2g4:20 [ 45.253780] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11b_11ag_2m_2g4:20 [ 45.262958] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11b_11ag_5m5_2g4:20 [ 45.272233] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11b_11ag_11m_2g4:20 [ 45.281500] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11b_11ag_6m_2g4:20 [ 45.290678] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11b_11ag_9m_2g4:20 [ 45.299855] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11b_11ag_12m_2g4:20 [ 45.309130] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11b_11ag_18m_2g4:20 [ 45.318404] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11b_11ag_24m_2g4:18 [ 45.327684] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11b_11ag_36m_2g4:18 [ 45.336960] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11b_11ag_48m_2g4:16 [ 45.346237] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11b_11ag_54m_2g4:16 [ 45.355518] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11n_11ac_mcs0_2g4:20 [ 45.364893] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11n_11ac_mcs1_2g4:20 [ 45.374266] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11n_11ac_mcs2_2g4:20 [ 45.383638] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11n_11ac_mcs3_2g4:20 [ 45.393010] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11n_11ac_mcs4_2g4:18 [ 45.402383] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11n_11ac_mcs5_2g4:18 [ 45.411755] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11n_11ac_mcs6_2g4:16 [ 45.421120] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11n_11ac_mcs7_2g4:16 [ 45.430497] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11n_11ac_mcs8_2g4:16 [ 45.439870] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11n_11ac_mcs9_2g4:16 [ 45.449242] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11ax_mcs0_2g4:20 [ 45.458225] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11ax_mcs1_2g4:20 [ 45.467207] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11ax_mcs2_2g4:20 [ 45.476192] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11ax_mcs3_2g4:20 [ 45.485180] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11ax_mcs4_2g4:18 [ 45.494164] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11ax_mcs5_2g4:18 [ 45.503148] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11ax_mcs6_2g4:16 [ 45.512130] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11ax_mcs7_2g4:16 [ 45.521105] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11ax_mcs8_2g4:16 [ 45.530092] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11ax_mcs9_2g4:16 [ 45.539076] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11ax_mcs10_2g4:15 [ 45.548155] AICWFDBG(LOGINFO) get_userconfig_txpwr_lvl_v2_in_fdrv:lvl_11ax_mcs11_2g4:15 [ 45.557235] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:enable:1 [ 45.563879] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11b_11ag_1m_2g4:20 [ 45.571886] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11b_11ag_2m_2g4:20 [ 45.579887] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11b_11ag_5m5_2g4:20 [ 45.587992] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11b_11ag_11m_2g4:20 [ 45.596097] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11b_11ag_6m_2g4:20 [ 45.604108] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11b_11ag_9m_2g4:20 [ 45.612122] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11b_11ag_12m_2g4:20 [ 45.620220] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11b_11ag_18m_2g4:20 [ 45.628333] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11b_11ag_24m_2g4:18 [ 45.636440] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11b_11ag_36m_2g4:18 [ 45.644546] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11b_11ag_48m_2g4:16 [ 45.652651] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11b_11ag_54m_2g4:16 [ 45.660749] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11n_11ac_mcs0_2g4:20 [ 45.668951] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11n_11ac_mcs1_2g4:20 [ 45.677154] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11n_11ac_mcs2_2g4:20 [ 45.685356] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11n_11ac_mcs3_2g4:20 [ 45.693559] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11n_11ac_mcs4_2g4:18 [ 45.701762] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11n_11ac_mcs5_2g4:18 [ 45.709957] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11n_11ac_mcs6_2g4:16 [ 45.718160] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11n_11ac_mcs7_2g4:16 [ 45.726367] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11n_11ac_mcs8_2g4:16 [ 45.734573] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11n_11ac_mcs9_2g4:16 [ 45.742782] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11ax_mcs0_2g4:20 [ 45.750588] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11ax_mcs1_2g4:20 [ 45.758403] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11ax_mcs2_2g4:20 [ 45.766217] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11ax_mcs3_2g4:20 [ 45.774030] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11ax_mcs4_2g4:18 [ 45.781843] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11ax_mcs5_2g4:18 [ 45.789648] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11ax_mcs6_2g4:16 [ 45.797461] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11ax_mcs7_2g4:16 [ 45.805274] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11ax_mcs8_2g4:16 [ 45.813087] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11ax_mcs9_2g4:16 [ 45.820892] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11ax_mcs10_2g4:15 [ 45.828807] AICWFDBG(LOGINFO) rwnx_send_txpwr_lvl_req:lvl_11ax_mcs11_2g4:15 [ 45.836722] AICWFDBG(LOGTRACE) rwnx_send_msg (120)MM_SET_TXPWR_IDX_LVL_CFM reqcfm:1 in_irq:0 in_softirq:0 in_atomic:0 [ 45.848730] AICWFDBG(LOGTRACE) rwnx_cmd_malloc get cmd_array[0]:a97386e8 [ 45.856685] AICWFDBG(LOGDEBUG) rwnx_rx_handle_msg msg->id:0x78 [ 45.863509] AICWFDBG(LOGTRACE) rwnx_cmd_free cmd_array[0]:a97386e8 [ 45.870636] AICWFDBG(LOGTRACE) >>> rwnx_send_txpwr_ofst_req() [ 45.877120] AICWFDBG(LOGINFO) get_userconfig_txpwr_ofst_in_fdrv:enable :0 [ 45.885337] AICWFDBG(LOGINFO) get_userconfig_txpwr_ofst_in_fdrv:chan_1_4 :0 [ 45.893551] AICWFDBG(LOGINFO) get_userconfig_txpwr_ofst_in_fdrv:chan_5_9 :0 [ 45.901765] AICWFDBG(LOGINFO) get_userconfig_txpwr_ofst_in_fdrv:chan_10_13 :0 [ 45.909980] AICWFDBG(LOGINFO) get_userconfig_txpwr_ofst_in_fdrv:chan_36_64 :0 [ 45.918197] AICWFDBG(LOGINFO) get_userconfig_txpwr_ofst_in_fdrv:chan_100_120:0 [ 45.926417] AICWFDBG(LOGINFO) get_userconfig_txpwr_ofst_in_fdrv:chan_122_140:0 [ 45.934623] AICWFDBG(LOGINFO) get_userconfig_txpwr_ofst_in_fdrv:chan_142_165:0 [ 45.942834] AICWFDBG(LOGTRACE) >>> rwnx_msg_free() [ 45.948204] AICWFDBG(LOGTRACE) >>> rwnx_send_rf_config_req() [ 45.954564] AICWFDBG(LOGTRACE) rwnx_send_msg (104)MM_SET_RF_CONFIG_CFM reqcfm:1 in_irq:0 in_softirq:0 in_atomic:0 [ 45.966191] AICWFDBG(LOGTRACE) rwnx_cmd_malloc get cmd_array[0]:a97386e8 [ 45.974143] AICWFDBG(LOGDEBUG) rwnx_rx_handle_msg msg->id:0x68 [ 45.980898] AICWFDBG(LOGTRACE) rwnx_cmd_free cmd_array[0]:a97386e8 [ 45.988071] AICWFDBG(LOGTRACE) >>> rwnx_send_rf_config_req() [ 45.994441] AICWFDBG(LOGTRACE) rwnx_send_msg (104)MM_SET_RF_CONFIG_CFM reqcfm:1 in_irq:0 in_softirq:0 in_atomic:0 [ 46.006069] AICWFDBG(LOGTRACE) rwnx_cmd_malloc get cmd_array[0]:a97386e8 [ 46.013974] AICWFDBG(LOGDEBUG) rwnx_rx_handle_msg msg->id:0x68 [ 46.020761] AICWFDBG(LOGTRACE) rwnx_cmd_free cmd_array[0]:a97386e8 [ 46.027935] AICWFDBG(LOGTRACE) >>> rwnx_send_rf_config_req() [ 46.034328] AICWFDBG(LOGTRACE) rwnx_send_msg (104)MM_SET_RF_CONFIG_CFM reqcfm:1 in_irq:0 in_softirq:0 in_atomic:0 [ 46.045955] AICWFDBG(LOGTRACE) rwnx_cmd_malloc get cmd_array[0]:a97386e8 [ 46.053864] AICWFDBG(LOGDEBUG) rwnx_rx_handle_msg msg->id:0x68 [ 46.060660] AICWFDBG(LOGTRACE) rwnx_cmd_free cmd_array[0]:a97386e8 [ 46.067821] AICWFDBG(LOGTRACE) >>> rwnx_send_rf_config_req() [ 46.074231] AICWFDBG(LOGTRACE) rwnx_send_msg (104)MM_SET_RF_CONFIG_CFM reqcfm:1 in_irq:0 in_softirq:0 in_atomic:0 [ 46.085860] AICWFDBG(LOGTRACE) rwnx_cmd_malloc get cmd_array[0]:a97386e8 [ 46.093768] AICWFDBG(LOGDEBUG) rwnx_rx_handle_msg msg->id:0x68 [ 46.100551] AICWFDBG(LOGTRACE) rwnx_cmd_free cmd_array[0]:a97386e8 [ 46.107723] AICWFDBG(LOGTRACE) >>> rwnx_send_rf_calib_req() [ 46.114014] AICWFDBG(LOGINFO) get_userconfig_xtal_cap:enable :0 [ 46.121332] AICWFDBG(LOGINFO) get_userconfig_xtal_cap:xtal_cap :0 [ 46.128665] AICWFDBG(LOGINFO) get_userconfig_xtal_cap:xtal_cap_fine:0 [ 46.135999] AICWFDBG(LOGTRACE) rwnx_send_msg (106)MM_SET_RF_CALIB_CFM reqcfm:1 in_irq:0 in_softirq:0 in_atomic:0 [ 46.147523] AICWFDBG(LOGTRACE) rwnx_cmd_malloc get cmd_array[0]:a97386e8 [ 46.392682] AICWFDBG(LOGDEBUG) rwnx_rx_handle_msg msg->id:0x6a [ 46.399519] AICWFDBG(LOGTRACE) rwnx_cmd_free cmd_array[0]:a97386e8 [ 46.406671] AICWFDBG(LOGTRACE) >>> rwnx_send_get_macaddr_req() [ 46.413239] AICWFDBG(LOGTRACE) rwnx_send_msg (116)MM_GET_MAC_ADDR_CFM reqcfm:1 in_irq:0 in_softirq:0 in_atomic:0 [ 46.424765] AICWFDBG(LOGTRACE) rwnx_cmd_malloc get cmd_array[0]:a97386e8 [ 46.432894] AICWFDBG(LOGDEBUG) rwnx_rx_handle_msg msg->id:0x74 [ 46.439647] AICWFDBG(LOGTRACE) rwnx_cmd_free cmd_array[0]:a97386e8 [ 46.446801] AICWFDBG(LOGINFO) get macaddr: bc:2b:02:0a:b6:74 [ 46.453251] AICWFDBG(LOGTRACE) >>> rwnx_send_reset() [ 46.458820] AICWFDBG(LOGTRACE) rwnx_send_msg (1)MM_RESET_CFM reqcfm:1 in_irq:0 in_softirq:0 in_atomic:0 [ 46.469463] AICWFDBG(LOGTRACE) rwnx_cmd_malloc get cmd_array[0]:a97386e8 [ 46.478057] AICWFDBG(LOGDEBUG) rwnx_rx_handle_msg msg->id:0x1 [ 46.484728] AICWFDBG(LOGTRACE) rwnx_cmd_free cmd_array[0]:a97386e8 [ 46.491878] AICWFDBG(LOGTRACE) >>> rwnx_send_version_req() [ 46.498031] AICWFDBG(LOGTRACE) rwnx_send_msg (5)MM_VERSION_CFM reqcfm:1 in_irq:0 in_softirq:0 in_atomic:0 [ 46.508874] AICWFDBG(LOGTRACE) rwnx_cmd_malloc get cmd_array[0]:a97386e8 [ 46.516774] AICWFDBG(LOGDEBUG) rwnx_rx_handle_msg msg->id:0x5 [ 46.523475] AICWFDBG(LOGTRACE) rwnx_cmd_free cmd_array[0]:a97386e8 [ 46.530631] AICWFDBG(LOGTRACE) >>> rwnx_set_vers() [ 46.536029] AICWFDBG(LOGINFO) rwnx_handle_dynparams unsupport mcs11 change to mcs9 [ 46.536042] AICWFDBG(LOGTRACE) >>> rwnx_send_me_config_req() [ 46.550897] ieee80211 phy0: HT supp 1, VHT supp 1, HE supp 1 [ 46.557254] AICWFDBG(LOGTRACE) rwnx_send_msg (5121)ME_CONFIG_CFM reqcfm:1 in_irq:0 in_softirq:0 in_atomic:0 [ 46.568288] AICWFDBG(LOGTRACE) rwnx_cmd_malloc get cmd_array[0]:a97386e8 [ 46.576213] AICWFDBG(LOGDEBUG) rwnx_rx_handle_msg msg->id:0x1401 [ 46.583204] AICWFDBG(LOGTRACE) rwnx_cmd_free cmd_array[0]:a97386e8 [ 46.590514] AICWFDBG(LOGTRACE) >>> rwnx_send_me_chan_config_req() [ 46.597460] AICWFDBG(LOGTRACE) rwnx_send_msg (5123)ME_CHAN_CONFIG_CFM reqcfm:1 in_irq:0 in_softirq:0 in_atomic:0 [ 46.608997] AICWFDBG(LOGTRACE) rwnx_cmd_malloc get cmd_array[0]:a97386e8 [ 46.616951] AICWFDBG(LOGDEBUG) rwnx_rx_handle_msg msg->id:0x1403 [ 46.623984] AICWFDBG(LOGTRACE) rwnx_cmd_free cmd_array[0]:a97386e8 [ 46.631417] AICWFDBG(LOGINFO) getRegdomainFromRwnxDB set ccode:00 [ 46.638536] AICWFDBG(LOGINFO) rwnx_get_countrycode_channels support channel:1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 46.649826] ieee80211 phy0: [ 46.649826] ******************************************************* [ 46.649826] ** CAUTION: USING PERMISSIVE CUSTOM REGULATORY RULES ** [ 46.649826] ******************************************************* [ 46.674129] AICWFDBG(LOGTRACE) >>> rwnx_send_me_chan_config_req() [ 46.680970] AICWFDBG(LOGTRACE) rwnx_send_msg (5123)ME_CHAN_CONFIG_CFM reqcfm:1 in_irq:0 in_softirq:0 in_atomic:0 [ 46.692499] AICWFDBG(LOGTRACE) rwnx_cmd_malloc get cmd_array[0]:a97386e8 [ 46.700686] AICWFDBG(LOGDEBUG) rwnx_rx_handle_msg msg->id:0x1403 [ 46.707729] AICWFDBG(LOGTRACE) rwnx_cmd_free cmd_array[0]:a97386e8 [ 46.714884] AICWFDBG(LOGTRACE) >>> rwnx_dbgfs_register() [ 46.720952] AICWFDBG(LOGINFO) fw_log_init: c61e0000, c61e2800 [ 46.727439] AICWFDBG(LOGINFO) rwnx_interface_add: wlan%d, 2, 10 [ 46.734345] AICWFDBG(LOGINFO) interface add:bc 2b 2 a b6 74 [ 47.367580] get_txpwr_max:txpwr_max:20 [ 47.463747] AICWFDBG(LOGINFO) New interface create wlan0 root@TinaLinux:/mnt/UDISK# root@TinaLinux:/mnt/UDISK# root@TinaLinux:/mnt/UDISK# root@TinaLinux:/mnt/UDISK# hcidump -w output.hci HCI sniffer - Bluetooth packet analyzer ver 5.54 Can't attach to device hci0. No such device(19) btsnoop version: 1 datalink type: 1002 root@TinaLinux:/mnt/UDISK# root@TinaLinux:/mnt/UDISK# root@TinaLinux:/mnt/UDISK# lsmod aic8800_bsp 81920 1 aic8800_fdrv aic8800_fdrv 413696 0 root@TinaLinux:/mnt/UDISK# insmod aic8800_btlpm.ko [ 72.961080] aic_bluetooth_mod_init [ 72.965452] -->rfkill_bluetooth_init [ 72.969956] <--rfkill_bluetooth_init [ 72.974054] [BT_LPM] bluesleep_init: BlueSleep Mode Driver Ver 1.3.3 [ 72.981688] [BT_LPM] bluesleep_probe: bt_hostwake gpio=207 assert=1 [ 72.981688] [ 72.990489] [BT_LPM] bluesleep_probe: wakeup source is disabled! [ 72.990489] [ 72.998955] [BT_LPM] bluesleep_probe: bt_wake gpio=206 assert=1 [ 72.998955] [ 73.007290] [BT_LPM] bluesleep_probe: uart_index (1) [ 73.007290] root@TinaLinux:/mnt/UDISK# root@TinaLinux:/mnt/UDISK# root@TinaLinux:/mnt/UDISK# root@TinaLinux:/mnt/UDISK# hcidump -w output.hci HCI sniffer - Bluetooth packet analyzer ver 5.54 Can't attach to device hci0. No such device(19) btsnoop version: 1 datalink type: 1002 root@TinaLinux:/mnt/UDISK# root@TinaLinux:/mnt/UDISK# root@TinaLinux:/mnt/UDISK# hciattach -s 1500000 /dev/ttyS1 any 1500000 flow nosl eep& root@TinaLinux:/mnt/UDISK# Device setup complete [1]+ Done hciattach -s 1500000 /dev/ttyS1 any 1500000 flow nosleep root@TinaLinux:/mnt/UDISK# root@TinaLinux:/mnt/UDISK# root@TinaLinux:/mnt/UDISK# hcidump -w output.hci HCI sniffer - Bluetooth packet analyzer ver 5.54 btsnoop version: 1 datalink type: 1002 device: hci0 snap_len: 1500 filter: 0x0 ^C root@TinaLinux:/mnt/UDISK# root@TinaLinux:/mnt/UDISK# hcidump -w output.hci & root@TinaLinux:/mnt/UDISK# HCI sniffer - Bluetooth packet analyzer ver 5.54 btsnoop version: 1 datalink type: 1002 device: hci0 snap_len: 1500 filter: 0x0 root@TinaLinux:/mnt/UDISK# root@TinaLinux:/mnt/UDISK# hciconfig -a hci0: Type: Primary Bus: UART BD Address: BC:2B:02:0A:B6:75 ACL MTU: 251:14 SCO MTU: 0:0 DOWN RX bytes:220 acl:0 sco:0 events:16 errors:0 TX bytes:91 acl:0 sco:0 commands:16 errors:0 Features: 0x00 0x00 0x00 0x00 0x60 0x00 0x00 0x00 Packet type: DM1 DH1 HV1 Link policy: Link mode: SLAVE ACCEPT root@TinaLinux:/mnt/UDISK# hciconfig hci0 up root@TinaLinux:/mnt/UDISK# hciconfig -a hci0: Type: Primary Bus: UART BD Address: BC:2B:02:0A:B6:75 ACL MTU: 251:14 SCO MTU: 0:0 UP RUNNING RX bytes:440 acl:0 sco:0 events:32 errors:0 TX bytes:182 acl:0 sco:0 commands:32 errors:0 Features: 0x00 0x00 0x00 0x00 0x60 0x00 0x00 0x00 Packet type: DM1 DH1 HV1 Link policy: Link mode: SLAVE ACCEPT Can't read local name on hci0: Input/output error (5) root@TinaLinux:/mnt/UDISK# root@TinaLinux:/mnt/UDISK# root@TinaLinux:/mnt/UDISK# ls 1111.txt aic8800_btlpm.ko output.hci aic8800_bsp.ko aic8800_fdrv.ko root@TinaLinux:/mnt/UDISK# hcidump -r output.hci HCI sniffer - Bluetooth packet analyzer ver 5.54 btsnoop version: 1 datalink type: 1002 < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 > HCI Event: Command Complete (0x0e) plen 12 Read Local Supported Features (0x04|0x0003) ncmd 5 status 0x00 Features: 0x00 0x00 0x00 0x00 0x60 0x00 0x00 0x00 < HCI Command: Read Local Version Information (0x04|0x0001) plen 0 > HCI Event: Command Complete (0x0e) plen 12 Read Local Version Information (0x04|0x0001) ncmd 5 status 0x00 HCI Version: 5.2 (0xb) HCI Revision: 0x14 LMP Version: 5.2 (0xb) LMP Subversion: 0x14 Manufacturer: not assigned (2875) < HCI Command: Read BD ADDR (0x04|0x0009) plen 0 > HCI Event: Command Complete (0x0e) plen 10 Read BD ADDR (0x04|0x0009) ncmd 5 status 0x00 bdaddr BC:2B:02:0A:B6:75 < HCI Command: LE Read Buffer Size (0x08|0x0002) plen 0 > HCI Event: Command Complete (0x0e) plen 7 LE Read Buffer Size (0x08|0x0002) ncmd 5 status 0x00 pktlen 0x00fb maxpkt 0x0e < HCI Command: LE Read Local Supported Features (0x08|0x0003) plen 0 > HCI Event: Command Complete (0x0e) plen 12 LE Read Local Supported Features (0x08|0x0003) ncmd 5 status 0x00 features 0xdff9010800000000 (Link Layer supports LE Encryption) < HCI Command: LE Read Supported States (0x08|0x001c) plen 0 > HCI Event: Command Complete (0x0e) plen 12 LE Read Supported States (0x08|0x001c) ncmd 5 < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local Supported Commands (0x04|0x0002) ncmd 5 status 0x00 Commands: 2000800000c000000000e40000002822000000000000040000f7ffff7f000000 30f0ffffffffff07 < HCI Command: Set Event Mask (0x03|0x0001) plen 8 Mask: 0x90e8040200800020 > HCI Event: Command Complete (0x0e) plen 4 Set Event Mask (0x03|0x0001) ncmd 5 status 0x00 < HCI Command: LE Set Event Mask (0x08|0x0001) plen 8 mask 0xbf1f0a0000000000 (Reserved) > HCI Event: Command Complete (0x0e) plen 4 LE Set Event Mask (0x08|0x0001) ncmd 5 status 0x00 < HCI Command: LE Read White List Size (0x08|0x000f) plen 0 > HCI Event: Command Complete (0x0e) plen 5 LE Read White List Size (0x08|0x000f) ncmd 5 < HCI Command: LE Clear White List (0x08|0x0010) plen 0 > HCI Event: Command Complete (0x0e) plen 4 LE Clear White List (0x08|0x0010) ncmd 5 status 0x00 < HCI Command: Unknown (0x08|0x002a) plen 0 > HCI Event: Command Complete (0x0e) plen 5 Unknown (0x08|0x002a) ncmd 5 < HCI Command: Unknown (0x08|0x0029) plen 0 > HCI Event: Command Complete (0x0e) plen 4 Unknown (0x08|0x0029) ncmd 5 < HCI Command: Unknown (0x08|0x003b) plen 0 > HCI Event: Command Complete (0x0e) plen 5 Unknown (0x08|0x003b) ncmd 5 < HCI Command: Set Event Mask Page 2 (0x03|0x0063) plen 8 Mask: 0x0000800000000000 > HCI Event: Command Complete (0x0e) plen 4 Set Event Mask Page 2 (0x03|0x0063) ncmd 5 status 0x00 < HCI Command: Unknown (0x08|0x0031) plen 3 > HCI Event: Command Complete (0x0e) plen 4 Unknown (0x08|0x0031) ncmd 5 < HCI Command: Read Local Name (0x03|0x0014) plen 0 > HCI Event: Command Complete (0x0e) plen 252 Read Local Name (0x03|0x0014) ncmd 5 status 0x02 name '' Error: Unknown Connection Identifier root@TinaLinux:/mnt/UDISK#上面是整个加载模组的流程和调试信息，使用蓝牙设备的时候报错，大佬们帮忙看下是哪里的问题，提点意见，非常感谢
-
回复: Tian的t113使用UDISK作为overlay,但是每次跟新镜像的时候有一些数据还是上次更新前的。发布在 其它全志芯片讨论区
@ysc3650145 烧录的时候选择的擦除方式问题，可以选择全盘擦除，或者修改sys_config.fex文件的配置项
-
回复: tina系统，想要使用gdb调试应用程序，在makefile中加入-g参数，生成的执行程序一直debug 符号链接，这是怎么回事？发布在 Linux
@chen10 因为我老是使用环境变量croofs切换过去，这里面有调用strip，优化去掉调试信息，只能直接cd 目录过去
-
请问一下，100s tina uboot阶段的环境变量跟进入系统获取的环境变量不一样这是什么原因呢？发布在 Linux
首先是默认env.cfg配置文件默认配置的变量：
比如说，目前配置的是在uboot阶段通过setenv指令更新环境变量boot_partition成功：
进入系统终端：
获取的环境变量值却没有改变过来，这可能是什么原因呢
-
回复: T113-i usb0 能在电脑端识别，但是PhoenixSuit不能检测到设备，一点反应都没有发布在 编译和烧写问题专区
你搞错了呀，你图上的是全志的设备驱动，跟工具识别到设备没有直接关系，这个主要是烧录的时候用的，让工具识别的设备主要是adb驱动，把主板usb配置成设备模式呢
-
100s tina 3.5.1 跑fbtft spi接口屏，LVGL 做长跑测试出现报错发布在 Linux
[96359.536592] INFO: task kworker/0:1:9 blocked for more than 120 seconds. [96359.544009] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [96359.552774] kworker/0:1 D c0358d3c 0 9 2 0x00000000 [96359.559933] Workqueue: events fb_deferred_io_work [96359.565154] Backtrace: [96359.567978] [<c0358aac>] (__schedule+0x0/0x360) from [<c0358e94>] (schedule+0x88/0x8c) [96359.576835] [<c0358e0c>] (schedule+0x0/0x8c) from [<c0357b78>] (schedule_timeout+0x20/0x130) [96359.586224] [<c0357b58>] (schedule_timeout+0x0/0x130) from [<c0359118>] (wait_for_common+0xe0/0x16c) [96359.596395] r9:00000000 r8:00000000 r7:00000002 r6:c0c5a000 r5:c0c5bd34 r4:7fffffff [96359.605215] [<c0359038>] (wait_for_common+0x0/0x16c) from [<c03591bc>] (wait_for_completion+0x18/0x1c) [96359.615583] r9:c1800000 r8:c0c5bd34 r7:00000000 r6:c0d800f8 r5:00000000 r4:c0c5bd9c [96359.624384] [<c03591a4>] (wait_for_completion+0x0/0x1c) from [<c020fa2c>] (spi_sync+0x74/0x8c) [96359.634012] [<c020f9b8>] (spi_sync+0x0/0x8c) from [<c0194550>] (fbtft_write_spi+0xec/0xfc) [96359.643219] r8:00002000 r7:c2820000 r6:c1800000 r5:c0c5bd9c r4:c0d2331c [96359.650771] [<c0194464>] (fbtft_write_spi+0x0/0xfc) from [<c0194404>] (fbtft_write_vmem16_bus8+0x104/0x134) [96359.661640] r6:00000000 r5:00002000 r4:c0d2331c [96359.666855] [<c0194300>] (fbtft_write_vmem16_bus8+0x0/0x134) from [<c0191010>] (fbtft_update_display+0x144/0x304) [96359.678299] [<c0190ecc>] (fbtft_update_display+0x0/0x304) from [<c0190a48>] (fbtft_deferred_io+0x6c/0x100) [96359.689066] [<c01909dc>] (fbtft_deferred_io+0x0/0x100) from [<c0190434>] (fb_deferred_io_work+0x48/0xd8) [96359.699654] [<c01903ec>] (fb_deferred_io_work+0x0/0xd8) from [<c0031d68>] (process_one_work+0x1e8/0x330) [96359.710205] r9:c0c5a000 r8:c052b600 r7:00000000 r6:c0485024 r5:c0d232b0 r4:c0c22f00 [96359.719039] [<c0031b80>] (process_one_work+0x0/0x330) from [<c0032c0c>] (worker_thread+0x1cc/0x358) [96359.729155] [<c0032a40>] (worker_thread+0x0/0x358) from [<c0037da0>] (kthread+0xa8/0xb4) [96359.738215] [<c0037cf8>] (kthread+0x0/0xb4) from [<c000f930>] (ret_from_fork+0x14/0x24) [96359.747134] r7:00000000 r6:00000000 r5:c0037cf8 r4:c0c49e7c [96359.753468] INFO: task 86t2_f1c200s:192 blocked for more than 120 seconds. [96359.761132] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [96359.769851] 86t2_f1c200s D c0358d3c 0 192 1 0x00000000 [96359.776956] Backtrace: [96359.779726] [<c0358aac>] (__schedule+0x0/0x360) from [<c0358e94>] (schedule+0x88/0x8c) [96359.788593] [<c0358e0c>] (schedule+0x0/0x8c) from [<c03592d0>] (schedule_preempt_disabled+0x10/0x14) [96359.798803] [<c03592c0>] (schedule_preempt_disabled+0x0/0x14) from [<c0358260>] (__mutex_lock_slowpath+0x6c/0xb8) [96359.810254] [<c03581f4>] (__mutex_lock_slowpath+0x0/0xb8) from [<c03582e8>] (mutex_lock+0x3c/0x40) [96359.820228] r8:c04f42c0 r7:c01904c4 r6:c0d93494 r5:c0d23000 r4:c0d93494 [96359.827764] [<c03582ac>] (mutex_lock+0x0/0x40) from [<c01904f0>] (fb_deferred_io_mkwrite+0x2c/0xf8) [96359.837847] r5:c0d23000 r4:c0d93490 [96359.841853] [<c01904c4>] (fb_deferred_io_mkwrite+0x0/0xf8) from [<c0081368>] (handle_pte_fault+0x774/0xa48) [96359.852693] r9:c0f463e8 r8:80d9618f r7:c01904c4 r6:b6afa000 r5:c0e65160 r4:c04f42c0 [96359.861471] [<c0080bf4>] (handle_pte_fault+0x0/0xa48) from [<c00816f0>] (handle_mm_fault+0xb4/0xd8) [96359.871570] [<c008163c>] (handle_mm_fault+0x0/0xd8) from [<c0016510>] (do_page_fault+0x1d4/0x278) [96359.881474] [<c001633c>] (do_page_fault+0x0/0x278) from [<c000a1d0>] (do_DataAbort+0x40/0xa4) [96359.890997] [<c000a190>] (do_DataAbort+0x0/0xa4) from [<c000f660>] (__dabt_usr+0x40/0x60) [96359.900123] Exception stack(0xc0981fb0 to 0xc0981ff8) [96359.922359] 1fa0: b6afa17a 00281d5c 00000062 ffbcffbc [96359.932683] 1fc0: 00000000 00000000 00231928 00000066 000000bd 0000013f b6afa000 00000066 [96359.943117] 1fe0: 00000010 b6bb95c8 00000010 b6f1f12c 60000010 ffffffff [96359.950646] r7:00000066 r6:ffffffff r5:60000010 r4:b6f1f12c [96359.957087] INFO: task kworker/u2:2:8590 blocked for more than 120 seconds. [96359.964834] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [96359.973574] kworker/u2:2 D c0358d3c 0 8590 2 0x00000000 [96359.980715] Workqueue: spi1 sunxi_spi_work [96359.985260] Backtrace: [96359.988081] [<c0358aac>] (__schedule+0x0/0x360) from [<c0358e94>] (schedule+0x88/0x8c) [96359.996939] [<c0358e0c>] (schedule+0x0/0x8c) from [<c0357b78>] (schedule_timeout+0x20/0x130) [96360.006325] [<c0357b58>] (schedule_timeout+0x0/0x130) from [<c0359118>] (wait_for_common+0xe0/0x16c) [96360.016518] r9:00000000 r8:00000000 r7:00000002 r6:c0fe6000 r5:c0d807e8 r4:7fffffff [96360.025279] [<c0359038>] (wait_for_common+0x0/0x16c) from [<c03591bc>] (wait_for_completion+0x18/0x1c) [96360.035644] r9:00000000 r8:c0c5bdbc r7:f1c06018 r6:c0c5bd78 r5:c0d80168 r4:f1c06000 [96360.044450] [<c03591a4>] (wait_for_completion+0x0/0x1c) from [<c0212830>] (sunxi_spi_work+0x4b4/0x7fc) [96360.054850] [<c021237c>] (sunxi_spi_work+0x0/0x7fc) from [<c0031d68>] (process_one_work+0x1e8/0x330) [96360.065063] [<c0031b80>] (process_one_work+0x0/0x330) from [<c0032c0c>] (worker_thread+0x1cc/0x358) [96360.075175] [<c0032a40>] (worker_thread+0x0/0x358) from [<c0037da0>] (kthread+0xa8/0xb4) [96360.084257] [<c0037cf8>] (kthread+0x0/0xb4) from [<c000f930>] (ret_from_fork+0x14/0x24) [96360.093185] r7:00000000 r6:00000000 r5:c0037cf8 r4:c0adde7c [96480.095636] INFO: task kworker/0:1:9 blocked for more than 120 seconds. [96480.103042] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [96480.111804] kworker/0:1 D c0358d3c 0 9 2 0x00000000 [96480.118951] Workqueue: events fb_deferred_io_work [96480.124203] Backtrace: [96480.127032] [<c0358aac>] (__schedule+0x0/0x360) from [<c0358e94>] (schedule+0x88/0x8c) [96480.135930] [<c0358e0c>] (schedule+0x0/0x8c) from [<c0357b78>] (schedule_timeout+0x20/0x130) [96480.145320] [<c0357b58>] (schedule_timeout+0x0/0x130) from [<c0359118>] (wait_for_common+0xe0/0x16c) [96480.155496] r9:00000000 r8:00000000 r7:00000002 r6:c0c5a000 r5:c0c5bd34 r4:7fffffff [96480.164297] [<c0359038>] (wait_for_common+0x0/0x16c) from [<c03591bc>] (wait_for_completion+0x18/0x1c) [96480.174660] r9:c1800000 r8:c0c5bd34 r7:00000000 r6:c0d800f8 r5:00000000 r4:c0c5bd9c [96480.183456] [<c03591a4>] (wait_for_completion+0x0/0x1c) from [<c020fa2c>] (spi_sync+0x74/0x8c) [96480.193084] [<c020f9b8>] (spi_sync+0x0/0x8c) from [<c0194550>] (fbtft_write_spi+0xec/0xfc) [96480.202306] r8:00002000 r7:c2820000 r6:c1800000 r5:c0c5bd9c r4:c0d2331c [96480.209853] [<c0194464>] (fbtft_write_spi+0x0/0xfc) from [<c0194404>] (fbtft_write_vmem16_bus8+0x104/0x134) [96480.220687] r6:00000000 r5:00002000 r4:c0d2331c [96480.225889] [<c0194300>] (fbtft_write_vmem16_bus8+0x0/0x134) from [<c0191010>] (fbtft_update_display+0x144/0x304) [96480.237329] [<c0190ecc>] (fbtft_update_display+0x0/0x304) from [<c0190a48>] (fbtft_deferred_io+0x6c/0x100) [96480.248095] [<c01909dc>] (fbtft_deferred_io+0x0/0x100) from [<c0190434>] (fb_deferred_io_work+0x48/0xd8) [96480.258685] [<c01903ec>] (fb_deferred_io_work+0x0/0xd8) from [<c0031d68>] (process_one_work+0x1e8/0x330) [96480.269243] r9:c0c5a000 r8:c052b600 r7:00000000 r6:c0485024 r5:c0d232b0 r4:c0c22f00 [96480.278030] [<c0031b80>] (process_one_work+0x0/0x330) from [<c0032c0c>] (worker_thread+0x1cc/0x358) [96480.288137] [<c0032a40>] (worker_thread+0x0/0x358) from [<c0037da0>] (kthread+0xa8/0xb4) [96480.297195] [<c0037cf8>] (kthread+0x0/0xb4) from [<c000f930>] (ret_from_fork+0x14/0x24) [96480.306111] r7:00000000 r6:00000000 r5:c0037cf8 r4:c0c49e7c [96480.312444] INFO: task 86t2_f1c200s:192 blocked for more than 120 seconds. [96480.320124] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [96480.328848] 86t2_f1c200s D c0358d3c 0 192 1 0x00000000 [96480.335940] Backtrace: [96480.338710] [<c0358aac>] (__schedule+0x0/0x360) from [<c0358e94>] (schedule+0x88/0x8c) [96480.347568] [<c0358e0c>] (schedule+0x0/0x8c) from [<c03592d0>] (schedule_preempt_disabled+0x10/0x14) [96480.357773] [<c03592c0>] (schedule_preempt_disabled+0x0/0x14) from [<c0358260>] (__mutex_lock_slowpath+0x6c/0xb8) [96480.369225] [<c03581f4>] (__mutex_lock_slowpath+0x0/0xb8) from [<c03582e8>] (mutex_lock+0x3c/0x40) [96480.379221] r8:c04f42c0 r7:c01904c4 r6:c0d93494 r5:c0d23000 r4:c0d93494 [96480.386767] [<c03582ac>] (mutex_lock+0x0/0x40) from [<c01904f0>] (fb_deferred_io_mkwrite+0x2c/0xf8) [96480.396839] r5:c0d23000 r4:c0d93490 [96480.400844] [<c01904c4>] (fb_deferred_io_mkwrite+0x0/0xf8) from [<c0081368>] (handle_pte_fault+0x774/0xa48) [96480.411698] r9:c0f463e8 r8:80d9618f r7:c01904c4 r6:b6afa000 r5:c0e65160 r4:c04f42c0 [96480.420490] [<c0080bf4>] (handle_pte_fault+0x0/0xa48) from [<c00816f0>] (handle_mm_fault+0xb4/0xd8) [96480.430607] [<c008163c>] (handle_mm_fault+0x0/0xd8) from [<c0016510>] (do_page_fault+0x1d4/0x278) [96480.440536] [<c001633c>] (do_page_fault+0x0/0x278) from [<c000a1d0>] (do_DataAbort+0x40/0xa4) [96480.450071] [<c000a190>] (do_DataAbort+0x0/0xa4) from [<c000f660>] (__dabt_usr+0x40/0x60) [96480.459186] Exception stack(0xc0981fb0 to 0xc0981ff8) [96480.484248] 1fa0: b6afa17a 00281d5c 00000062 ffbcffbc [96480.494706] 1fc0: 00000000 00000000 00231928 00000066 000000bd 0000013f b6afa000 00000066 [96480.505143] 1fe0: 00000010 b6bb95c8 00000010 b6f1f12c 60000010 ffffffff [96480.512684] r7:00000066 r6:ffffffff r5:60000010 r4:b6f1f12c [96480.519097] INFO: task kworker/u2:2:8590 blocked for more than 120 seconds. [96480.526862] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [96480.535614] kworker/u2:2 D c0358d3c 0 8590 2 0x00000000 [96480.542717] Workqueue: spi1 sunxi_spi_work [96480.547319] Backtrace: [96480.550090] [<c0358aac>] (__schedule+0x0/0x360) from [<c0358e94>] (schedule+0x88/0x8c) [96480.558970] [<c0358e0c>] (schedule+0x0/0x8c) from [<c0357b78>] (schedule_timeout+0x20/0x130) [96480.568413] [<c0357b58>] (schedule_timeout+0x0/0x130) from [<c0359118>] (wait_for_common+0xe0/0x16c) [96480.578578] r9:00000000 r8:00000000 r7:00000002 r6:c0fe6000 r5:c0d807e8 r4:7fffffff [96480.587373] [<c0359038>] (wait_for_common+0x0/0x16c) from [<c03591bc>] (wait_for_completion+0x18/0x1c) [96480.597731] r9:00000000 r8:c0c5bdbc r7:f1c06018 r6:c0c5bd78 r5:c0d80168 r4:f1c06000 [96480.606531] [<c03591a4>] (wait_for_completion+0x0/0x1c) from [<c0212830>] (sunxi_spi_work+0x4b4/0x7fc) [96480.616961] [<c021237c>] (sunxi_spi_work+0x0/0x7fc) from [<c0031d68>] (process_one_work+0x1e8/0x330) [96480.627173] [<c0031b80>] (process_one_work+0x0/0x330) from [<c0032c0c>] (worker_thread+0x1cc/0x358) [96480.637287] [<c0032a40>] (worker_thread+0x0/0x358) from [<c0037da0>] (kthread+0xa8/0xb4) [96480.646343] [<c0037cf8>] (kthread+0x0/0xb4) from [<c000f930>] (ret_from_fork+0x14/0x24) [96480.655218] r7:00000000 r6:00000000 r5:c0037cf8 r4:c0adde7c [96600.654690] INFO: task kworker/0:1:9 blocked for more than 120 seconds. [96600.662100] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [96600.670854] kworker/0:1 D c0358d3c 0 9 2 0x00000000 [96600.678020] Workqueue: events fb_deferred_io_work [96600.683278] Backtrace: [96600.686101] [<c0358aac>] (__schedule+0x0/0x360) from [<c0358e94>] (schedule+0x88/0x8c) [96600.694973] [<c0358e0c>] (schedule+0x0/0x8c) from [<c0357b78>] (schedule_timeout+0x20/0x130) [96600.704360] [<c0357b58>] (schedule_timeout+0x0/0x130) from [<c0359118>] (wait_for_common+0xe0/0x16c) [96600.714552] r9:00000000 r8:00000000 r7:00000002 r6:c0c5a000 r5:c0c5bd34 r4:7fffffff [96600.723362] [<c0359038>] (wait_for_common+0x0/0x16c) from [<c03591bc>] (wait_for_completion+0x18/0x1c) [96600.733745] r9:c1800000 r8:c0c5bd34 r7:00000000 r6:c0d800f8 r5:00000000 r4:c0c5bd9c [96600.742571] [<c03591a4>] (wait_for_completion+0x0/0x1c) from [<c020fa2c>] (spi_sync+0x74/0x8c) [96600.752203] [<c020f9b8>] (spi_sync+0x0/0x8c) from [<c0194550>] (fbtft_write_spi+0xec/0xfc) [96600.761413] r8:00002000 r7:c2820000 r6:c1800000 r5:c0c5bd9c r4:c0d2331c [96600.768946] [<c0194464>] (fbtft_write_spi+0x0/0xfc) from [<c0194404>] (fbtft_write_vmem16_bus8+0x104/0x134) [96600.779782] r6:00000000 r5:00002000 r4:c0d2331c [96600.784983] [<c0194300>] (fbtft_write_vmem16_bus8+0x0/0x134) from [<c0191010>] (fbtft_update_display+0x144/0x304) [96600.796438] [<c0190ecc>] (fbtft_update_display+0x0/0x304) from [<c0190a48>] (fbtft_deferred_io+0x6c/0x100) [96600.807210] [<c01909dc>] (fbtft_deferred_io+0x0/0x100) from [<c0190434>] (fb_deferred_io_work+0x48/0xd8) [96600.817787] [<c01903ec>] (fb_deferred_io_work+0x0/0xd8) from [<c0031d68>] (process_one_work+0x1e8/0x330) [96600.828338] r9:c0c5a000 r8:c052b600 r7:00000000 r6:c0485024 r5:c0d232b0 r4:c0c22f00 [96600.837120] [<c0031b80>] (process_one_work+0x0/0x330) from [<c0032c0c>] (worker_thread+0x1cc/0x358) [96600.847227] [<c0032a40>] (worker_thread+0x0/0x358) from [<c0037da0>] (kthread+0xa8/0xb4) [96600.856299] [<c0037cf8>] (kthread+0x0/0xb4) from [<c000f930>] (ret_from_fork+0x14/0x24) [96600.865222] r7:00000000 r6:00000000 r5:c0037cf8 r4:c0c49e7c [96600.871552] INFO: task 86t2_f1c200s:192 blocked for more than 120 seconds. [96600.879218] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [96600.887933] 86t2_f1c200s D c0358d3c 0 192 1 0x00000000 [96600.895028] Backtrace: [96600.897799] [<c0358aac>] (__schedule+0x0/0x360) from [<c0358e94>] (schedule+0x88/0x8c) [96600.906659] [<c0358e0c>] (schedule+0x0/0x8c) from [<c03592d0>] (schedule_preempt_disabled+0x10/0x14) [96600.916883] [<c03592c0>] (schedule_preempt_disabled+0x0/0x14) from [<c0358260>] (__mutex_lock_slowpath+0x6c/0xb8) [96600.928340] [<c03581f4>] (__mutex_lock_slowpath+0x0/0xb8) from [<c03582e8>] (mutex_lock+0x3c/0x40) [96600.938314] r8:c04f42c0 r7:c01904c4 r6:c0d93494 r5:c0d23000 r4:c0d93494 [96600.945847] [<c03582ac>] (mutex_lock+0x0/0x40) from [<c01904f0>] (fb_deferred_io_mkwrite+0x2c/0xf8) [96600.955936] r5:c0d23000 r4:c0d93490 [96600.959944] [<c01904c4>] (fb_deferred_io_mkwrite+0x0/0xf8) from [<c0081368>] (handle_pte_fault+0x774/0xa48) [96600.970798] r9:c0f463e8 r8:80d9618f r7:c01904c4 r6:b6afa000 r5:c0e65160 r4:c04f42c0 [96600.979604] [<c0080bf4>] (handle_pte_fault+0x0/0xa48) from [<c00816f0>] (handle_mm_fault+0xb4/0xd8) [96600.989711] [<c008163c>] (handle_mm_fault+0x0/0xd8) from [<c0016510>] (do_page_fault+0x1d4/0x278) [96600.999634] [<c001633c>] (do_page_fault+0x0/0x278) from [<c000a1d0>] (do_DataAbort+0x40/0xa4) [96601.009164] [<c000a190>] (do_DataAbort+0x0/0xa4) from [<c000f660>] (__dabt_usr+0x40/0x60) [96601.018275] Exception stack(0xc0981fb0 to 0xc0981ff8) [96601.041527] 1fa0: b6afa17a 00281d5c 00000062 ffbcffbc [96601.051893] 1fc0: 00000000 00000000 00231928 00000066 000000bd 0000013f b6afa000 00000066 [96601.062222] 1fe0: 00000010 b6bb95c8 00000010 b6f1f12c 60000010 ffffffff [96601.069752] r7:00000066 r6:ffffffff r5:60000010 r4:b6f1f12c [96601.076175] INFO: task kworker/u2:2:8590 blocked for more than 120 seconds. [96601.083892] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [96601.092631] kworker/u2:2 D c0358d3c 0 8590 2 0x00000000 [96601.099801] Workqueue: spi1 sunxi_spi_work [96601.104347] Backtrace: [96601.107176] [<c0358aac>] (__schedule+0x0/0x360) from [<c0358e94>] (schedule+0x88/0x8c) [96601.116044] [<c0358e0c>] (schedule+0x0/0x8c) from [<c0357b78>] (schedule_timeout+0x20/0x130) [96601.125485] [<c0357b58>] (schedule_timeout+0x0/0x130) from [<c0359118>] (wait_for_common+0xe0/0x16c) [96601.135651] r9:00000000 r8:00000000 r7:00000002 r6:c0fe6000 r5:c0d807e8 r4:7fffffff [96601.144409] [<c0359038>] (wait_for_common+0x0/0x16c) from [<c03591bc>] (wait_for_completion+0x18/0x1c) [96601.154791] r9:00000000 r8:c0c5bdbc r7:f1c06018 r6:c0c5bd78 r5:c0d80168 r4:f1c06000 [96601.163551] [<c03591a4>] (wait_for_completion+0x0/0x1c) from [<c0212830>] (sunxi_spi_work+0x4b4/0x7fc) [96601.173951] [<c021237c>] (sunxi_spi_work+0x0/0x7fc) from [<c0031d68>] (process_one_work+0x1e8/0x330) [96601.184165] [<c0031b80>] (process_one_work+0x0/0x330) from [<c0032c0c>] (worker_thread+0x1cc/0x358) [96601.194278] [<c0032a40>] (worker_thread+0x0/0x358) from [<c0037da0>] (kthread+0xa8/0xb4) [96601.203341] [<c0037cf8>] (kthread+0x0/0xb4) from [<c000f930>] (ret_from_fork+0x14/0x24) [96601.212259] r7:00000000 r6:00000000 r5:c0037cf8 r4:c0adde7c [96721.213767] INFO: task kworker/0:1:9 blocked for more than 120 seconds. [96721.221178] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [96721.229937] kworker/0:1 D c0358d3c 0 9 2 0x00000000 [96721.237106] Workqueue: events fb_deferred_io_work [96721.242326] Backtrace: [96721.245150] [<c0358aac>] (__schedule+0x0/0x360) from [<c0358e94>] (schedule+0x88/0x8c) [96721.254023] [<c0358e0c>] (schedule+0x0/0x8c) from [<c0357b78>] (schedule_timeout+0x20/0x130) [96721.263443] [<c0357b58>] (schedule_timeout+0x0/0x130) from [<c0359118>] (wait_for_common+0xe0/0x16c) [96721.273673] r9:00000000 r8:00000000 r7:00000002 r6:c0c5a000 r5:c0c5bd34 r4:7fffffff [96721.282437] [<c0359038>] (wait_for_common+0x0/0x16c) from [<c03591bc>] (wait_for_completion+0x18/0x1c) [96721.292829] r9:c1800000 r8:c0c5bd34 r7:00000000 r6:c0d800f8 r5:00000000 r4:c0c5bd9c [96721.301637] [<c03591a4>] (wait_for_completion+0x0/0x1c) from [<c020fa2c>] (spi_sync+0x74/0x8c) [96721.311269] [<c020f9b8>] (spi_sync+0x0/0x8c) from [<c0194550>] (fbtft_write_spi+0xec/0xfc) [96721.320479] r8:00002000 r7:c2820000 r6:c1800000 r5:c0c5bd9c r4:c0d2331c [96721.328011] [<c0194464>] (fbtft_write_spi+0x0/0xfc) from [<c0194404>] (fbtft_write_vmem16_bus8+0x104/0x134) [96721.338845] r6:00000000 r5:00002000 r4:c0d2331c [96721.344056] [<c0194300>] (fbtft_write_vmem16_bus8+0x0/0x134) from [<c0191010>] (fbtft_update_display+0x144/0x304) [96721.355498] [<c0190ecc>] (fbtft_update_display+0x0/0x304) from [<c0190a48>] (fbtft_deferred_io+0x6c/0x100) [96721.366264] [<c01909dc>] (fbtft_deferred_io+0x0/0x100) from [<c0190434>] (fb_deferred_io_work+0x48/0xd8) [96721.376838] [<c01903ec>] (fb_deferred_io_work+0x0/0xd8) from [<c0031d68>] (process_one_work+0x1e8/0x330) [96721.387395] r9:c0c5a000 r8:c052b600 r7:00000000 r6:c0485024 r5:c0d232b0 r4:c0c22f00 [96721.396181] [<c0031b80>] (process_one_work+0x0/0x330) from [<c0032c0c>] (worker_thread+0x1cc/0x358) [96721.406300] [<c0032a40>] (worker_thread+0x0/0x358) from [<c0037da0>] (kthread+0xa8/0xb4) [96721.415364] [<c0037cf8>] (kthread+0x0/0xb4) from [<c000f930>] (ret_from_fork+0x14/0x24) [96721.424283] r7:00000000 r6:00000000 r5:c0037cf8 r4:c0c49e7c大佬们，帮忙瞧瞧，给点指导意见，非常感谢
-
回复: t113主频问题发布在 D1系列-RISC-V
可以修改cpu主频了：
echo userspace > /sys/devices/system/cpu/cpufreq/policy0/scaling_governor /用户策略/
echo 912000 > /sys/devices/system/cpu/cpufreq/policy0/scaling_setspeed /修改cpu主频/ -
请问一下，t113-i tina系统procd-init 怎么更换为busybox-init发布在 Linux
请问一下，t113-i tina系统procd-init 怎么更换为busybox-init ：
在文档中找到下面方式，但是编译会报错，
有弄过的大佬指点下，感谢！！！ -
回复: 100s tina 32bit frambuffer怎么变成16bit,tina 的disp框架有点大，不知道在哪个地方修改发布在 Linux
- f1c100s\tina\lichee\linux-3.10\drivers\video\sunxi\disp\disp\dev_fb.c
文件中的frambuffer配置改一下
2.fbx format 配置改一下
- f1c100s\tina\lichee\linux-3.10\drivers\video\sunxi\disp\disp\dev_fb.c
-
请教一下使用蓝牙测试工具bluz测试蓝牙报下面错误是什么原因？发布在 D1系列-RISC-V
root@TinaLinux:/mnt/UDISK# hciconfig
hci0: Type: BR/EDR Bus: USB
BD Address: 48:9A:5B:3C:30:9B ACL MTU: 27:8 SCO MTU: 0:0
UP
RX bytes:0 acl:0 sco:0 events:26 errors:0
TX bytes:0 acl:0 sco:0 commands:27 errors:0root@TinaLinux:/mnt/UDISK# hciconfig hci0 up
[ 272.410320] ssv_ble_hci_open():78
[ 272.415190] Config BLE HCI over HWIF
[ 272.420893] BLE TX: Reset
[ 272.444335] BLE RX: Command Complete. len=7
[ 272.449397] BLE TX: Read Local Supported Features
[ 272.457290] BLE RX: Command Complete. len=15
[ 272.462315] BLE TX: Read Local Version Information
[ 272.470281] BLE RX: Command Complete. len=15
[ 272.475281] BLE TX: Read BD_ADDR
[ 272.481531] BLE RX: Command Complete. len=13
[ 272.486736] BLE TX: LE Read Buffer Size
[ 272.493667] BLE RX: Command Complete. len=10
[ 272.499202] BLE TX: LE Read Local Supported Features
[ 272.506491] BLE RX: Command Complete. len=15
[ 272.512299] BLE TX: LE Read Advertising Channel TX Power
[ 272.520949] BLE RX: Command Complete. len=8
[ 272.525881] BLE TX: LE Read White List Size
[ 272.533600] BLE RX: Command Complete. len=8
[ 272.539244] BLE TX: LE Read Supported States
[ 272.545746] BLE RX: Command Complete. len=15
[ 272.551547] BLE TX: Set Event Mask
[ 272.558051] BLE RX: Command Complete. len=7
[ 272.562986] BLE TX: LE Set Event Mask
[ 272.569706] BLE RX: Command Complete. len=7
[ 272.574619] BLE TX: Read Local Supported Commands -optional-
[ 272.583529] BLE RX: Command Complete. len=71
[ 272.589667] BLE TX: LE Set Advertising Data
[ 272.595690] BLE RX: Command Complete. len=7root@TinaLinux:/mnt/UDISK# hcitool scan
Scanning ...[ 966.058850] host driver doesn't implement this unknow hci cmd ==》报错这里，
这里想要扫描蓝牙设备 -
tina系统，想要使用gdb调试应用程序，在makefile中加入-g参数，生成的执行程序一直debug 符号链接，这是怎么回事？发布在 Linux
下面是修改的makefile：
是我修改的位置不对吗，麻烦各位指点下！！！
-
请教一下各位大佬，这是mipi屏原厂给过来的初始化代码，麻烦大家帮忙看一下这是什么意思？发布在 D1系列-RISC-V
正常的给的是这种，
有点不明白上面第一种的格式是怎么去发送初始化代码的，有人见过第一种的格式吗，怎么变成第二种格式
-
回复: 100s tina 32bit frambuffer怎么变成16bit,tina 的disp框架有点大，不知道在哪个地方修改发布在 Linux
@awwwwa 这个地方修改没有效果，这个问题已经解决了，感谢
-
100s tina 32bit frambuffer怎么变成16bit,tina 的disp框架有点大，不知道在哪个地方修改发布在 Linux
100s tina 32bit frambuffer怎么变成16bit， tina 的disp框架有点大，不知道在哪个地方修改，有修改过的，麻烦指点下
-
回复: 100s的tina系统，怎么增加一颗ids表未支持的32M norflash？发布在 Linux
@whycan 报错在这个文件tina\lichee\linux-3.10\drivers\mtd\sunxipart.c：
static int sunxipart_parse(struct mtd_info *master, struct mtd_partition **pparts, struct mtd_part_parser_data *data) { int i, ret, nrparts; size_t bytes_read; struct sunxi_mbr *sunxi_mbr; struct mtd_partition *parts; sunxi_mbr = kzalloc(MBR_SIZE, GFP_KERNEL); if (sunxi_mbr == NULL) { pr_err("failed to alloc sunxi_mbr\n"); return -ENOMEM; } ret = mtd_read(master, MBR_OFFSET, MBR_SIZE, &bytes_read, (uint8_t *)sunxi_mbr); if ((ret < 0)) { pr_err("failed to read sunxi_mbr!\n"); kfree(sunxi_mbr); return -EIO; } printk("sunxi_mbr->PartCount = %d\n",sunxi_mbr->PartCount); if ((sunxi_mbr->PartCount == 0) || (sunxi_mbr->PartCount > MBR_MAX_PART_COUNT)) { pr_err("failed to parse sunxi_mbr)!\n"); ==》报错在这个位置，他的值确实是超过了MBR_MAX_PART_COUNT ，上面log有打印出这个值，但是我有点不明白这个原因是什么？ kfree(sunxi_mbr); return -EINVAL; } 。。。 } -
100s的tina系统，怎么增加一颗ids表未支持的32M norflash？发布在 Linux
现在16M的norflash，没有问题，但是内存不够，需要用到32M，发现按照16M的方式将新芯片加入ids表格中，启动过程中会报错，不能识别。增加32M除了新增ids表外，还需要那些操作？
[0]HELLO! BOOT0 is starting! [2]boot0 commit : f847d4e4b27dd960a09d765e9ffc91791bab2ced [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.65 (jkangli@server-211) (gcc version 6.4.1 (OpenWrt/Linaro GCC 6.4-2017.11 2017-11) ) #841 Wed Aug 30 02:10:22 UTC 2023 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: Allwinner A1X (Device Tree), model: sun3iw1p1 [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] cma: CMA: reserved 8 MiB at 81800000 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 8192 [ 0.000000] free_area_init_node: node 0, pgdat c05528ec, node_mem_map c057f000 [ 0.000000] Normal zone: 64 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 8192 pages, LIFO batch:0 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: enforcing=1 earlyprintk=sunxi-uart,0x01c25400 initcall_debug=0 console=ttyS1,115200 loglevel=8 root=/dev/mtdblock4 init=/pseudo_init rdinit=/rdinit partitions=boot@mtdblock1:bootlogo@mtdblock2:env@mtdblock3:rootfs@mtdblock4:rootfs_data@mtdblock5:misc@mtdblock6:private@mtdblock7:UDISK@mtdblock8 cma=8M fb_base=0x81e00000 androidboot.serialno=<NULL> boot_type=3 [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Memory: 32MB = 32MB total [ 0.000000] Memory: 18480k/18480k available, 14288k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xc2800000 - 0xff000000 ( 968 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc2000000 ( 32 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0444e4c (4340 kB) [ 0.000000] .init : 0xc0445000 - 0xc0463e18 ( 124 kB) [ 0.000000] .data : 0xc0464000 - 0xc0553208 ( 957 kB) [ 0.000000] .bss : 0xc0553208 - 0xc057e5c0 ( 173 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:256 [ 0.000000] of_sunxi_clocks_init : sunxi_clk_base[0xf1c20000] [ 0.000000] pll_cpu-set_default_rate=552000000 success! [ 0.000000] pll_video-set_default_rate=297000000 success! [ 0.000000] pll_ddr-set_default_rate=312000000 success! [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000365] Calibrating delay loop... 275.25 BogoMIPS (lpj=1376256) [ 0.085341] pid_max: default: 32768 minimum: 301 [ 0.090439] Mount-cache hash table entries: 512 [ 0.096364] CPU: Testing write buffer coherency: ok [ 0.102053] Setting up static identity map for 0xc0347338 - 0xc0347390 [ 0.111878] devtmpfs: initialized [ 0.117263] pinctrl core: initialized pinctrl subsystem [ 0.124772] NET: Registered protocol family 16 [ 0.132517] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.144916] sun3iw1p1-pinctrl pio: initialized sunXi PIO driver [ 0.167432] bio: create slab <bio-0> at 0 [ 0.172781] pwm module init! [ 0.177485] SCSI subsystem initialized [ 0.181603] usbcore: registered new interface driver usbfs [ 0.187383] usbcore: registered new interface driver hub [ 0.193160] usbcore: registered new device driver usb [ 0.201247] Advanced Linux Sound Architecture Driver Initialized. [ 0.209122] cfg80211: Calling CRDA to update world regulatory domain [ 0.216469] Switching to clocksource sun3i high-res couter [ 0.224858] get det_vbus is fail, 84 [ 0.228535] of_get_named_gpio_flags: can't parse gpios property [ 0.236141] NET: Registered protocol family 2 [ 0.242745] TCP established hash table entries: 512 (order: 0, 4096 bytes) [ 0.249727] TCP bind hash table entries: 512 (order: -1, 2048 bytes) [ 0.256266] TCP: Hash tables configured (established 512 bind 512) [ 0.262703] TCP: reno registered [ 0.266041] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.271971] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.278997] NET: Registered protocol family 1 [ 0.296922] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.303535] jffs2: version 2.2. (NAND) (SUMMARY) ? 2001-2006 Red Hat, Inc. [ 0.311532] msgmni has been set to 52 [ 0.318581] io scheduler noop registered [ 0.322801] io scheduler cfq registered (default) [ 0.328219] [pm]aw_pm_init! [ 0.331461] [pm]valid [ 0.333926] [pm]valid [ 0.336848] [DISP]disp_module_init [ 0.341998] of_get_named_gpio_flags: can't parse gpios property [ 0.348790] of_get_named_gpio_flags: can't parse gpios property [ 0.355226] of_get_named_gpio_flags: can't parse gpios property [ 0.361588] of_get_named_gpio_flags exited with status 130 [ 0.367600] of_get_named_gpio_flags exited with status 96 [ 0.373524] of_get_named_gpio_flags exited with status 108 [ 0.379449] of_get_named_gpio_flags exited with status 131 [ 0.385439] of_get_named_gpio_flags: can't parse gpios property [ 0.391768] of_get_named_gpio_flags: can't parse gpios property [ 0.398177] of_get_named_gpio_flags: can't parse gpios property [ 0.462171] pll_freq=297000000HZ, lcd_dclk_freq=14000000HZ, clk_div=21 [ 0.469527] num_screens=1 [ 0.472333] screen_id=0 [ 0.474865] para->mclk[MOD_CLK_LCD1CH0]=0xc0c0c340 [ 0.479724] para->mclk[MOD_CLK_LCD1CH1]=0xc0c0c440 [ 0.484630] disp tv init [ 0.487251] tcon_clk=0xc0c0c340, tcon_clk_parent=0x0 [ 0.492328] tcon_clk=0xc0c0c340, tcon_clk_parent=0xc0c04400 [ 0.497971] tve_clk=0xc0c0c440, tve_clk_parent=0xc0c04400 [ 0.503469] disp al tv init [ 0.509223] fetch script datadisp.screen2_output_type fail [ 0.515231] fetch script datadisp.screen2_output_mode fail [ 0.523623] fetch script datadisp.fb2_format fail [ 0.528726] fetch script datadisp.fb2_scaler_mode_enable fail [ 0.534941] fetch script datadisp.fb2_width fail [ 0.539957] fetch script datadisp.fb2_height fail [ 0.551704] [DISP] Fb_map_kernel_logo,line:561: this is not a bmp picture [ 0.560521] [DISP]disp_module_init finish [ 0.578967] uart0: ttyS0 at MMIO 0x1c25000 (irq = 104) is a SUNXI [ 0.586396] uart1: ttyS1 at MMIO 0x1c25400 (irq = 105) is a SUNXI [ 0.592720] sw_console_setup()1324 - console setup baud 115200 parity n bits 8, flow n [ 0.600729] console [ttyS1] enabled, bootconsole disabled [ 0.600729] console [ttyS1] enabled, bootconsole disabled [ 0.613516] uart2: ttyS2 at MMIO 0x1c25800 (irq = 106) is a SUNXI [ 0.625126] spi spi0: master is unqueued, this is deprecated [ 0.632830] m25p80 spi0.0: found py25q256hb, expected m25p64 [ 0.639254] m25p80 spi0.0: py25q256hb (32768 Kbytes) - fast mode [ 0.649886] sunxi_mbr->PartCount = 216375170 [ 0.654724] sunxipart: failed to parse sunxi_mbr)! [ 0.660096] m25p80: probe of spi0.0 failed with error -22 [ 0.666435] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.674239] usbcore: registered new interface driver usb-storage [ 0.681905] /soc/usbc0@0: could not find phandle [ 0.687160] of_get_named_gpio_flags: can't parse gpios property [ 0.693783] get regulator_io is no nocare [ 0.698373] sunxi_hcd_host0 1c13000.otghci0-controller: sunxi_hcd host driver [ 0.706387] sunxi_hcd_host0 1c13000.otghci0-controller: new USB bus registered, assigned bus number 1 [ 0.718125] hub 1-0:1.0: USB hub found [ 0.722497] hub 1-0:1.0: 1 port detected [ 0.727333] wrn: hcd is not enable, need not stop hcd [ 0.757185] rtc-pcf85063 2-0051: rtc core: registered pcf85063 as rtc0 [ 0.766572] i2c /dev entries driver [ 0.771024] IR NEC protocol handler initialized [ 0.776542] pdev->dev.of_node name :cir [ 0.781133] Registered IR keymap rc-nec-terratec-cinergy-xs [ 0.788207] input: sunxi_ir_recv as /devices/soc/1c22c00.cir/rc/rc0/input0 [ 0.796474] rc0: sunxi_ir_recv as /devices/soc/1c22c00.cir/rc/rc0 [ 0.808373] ipip: IPv4 over IPv4 tunneling driver [ 0.814893] gre: GRE over IPv4 demultiplexor driver [ 0.820324] ip_gre: GRE over IPv4 tunneling driver [ 0.828196] TCP: cubic registered [ 0.831892] Initializing XFRM netlink socket [ 0.836792] NET: Registered protocol family 17 [ 0.841839] NET: Registered protocol family 15 [ 0.847293] VFP support v0.3: not present [ 0.853071] [LCD]lcd_module_init [ 0.860349] enhance_en=1 [ 0.863342] matrixresult:(0x0, 0x3c4, 0x0, 0x0) [ 0.868421] ERROR,DE_BE_Layer_Set_Screen_Win:174 w,h=[0,0] [ 0.874611] ERROR,DE_BE_Layer_Set_Screen_Win:174 w,h=[0,0] [ 0.880713] ERROR,DE_BE_Layer_Set_Screen_Win:174 w,h=[0,0] [ 0.886929] pll_freq=297000000HZ, lcd_dclk_freq=14000000HZ, clk_div=21 [ 0.894254] clk_div=21 [ 0.897103] [drivers/video/sunxi/disp/lcd/panels/st7796p_320x480.c][LCD_power_on]299 [ 1.122138] [LCD]open, step 0 finish [ 1.162147] [drivers/video/sunxi/disp/lcd/panels/st7796p_320x480.c][LCD_panel_init]361 [ 1.171022] [drivers/video/sunxi/disp/lcd/panels/st7796p_320x480.c][lcd_init_data]103 [ 1.542664] [LCD]open, step 1 finish [ 1.602147] [LCD]open, step 2 finish [ 1.712569] [LCD]open, step 3 finish [ 1.722206] [LCD]lcd_module_init finish [ 1.727000] usb_serial_number:20080411 [ 1.731752] file system registered [ 1.738365] android_usb gadget: Mass Storage Function, version: 2009/09/11 [ 1.746136] android_usb gadget: Number of LUNs=3 [ 1.751311] lun0: LUN: removable file: (no medium) [ 1.756781] lun1: LUN: removable file: (no medium) [ 1.762235] lun2: LUN: removable file: (no medium) [ 1.768559] android_usb gadget: android_usb ready [ 1.775488] rtc-pcf85063 2-0051: setting system clock to 2000-01-01 18:18:27 UTC (946750707) [ 1.785178] ALSA device list: [ 1.788486] No soundcards found. [ 1.793260] VFS: Cannot open root device "mtdblock4" or unknown-block(0,0): error -6 [ 1.801918] Please append a correct "root=" boot option; here are the available partitions: [ 1.811289] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) -
回复: t113 tina linux 内核开机logo不显示发布在 其它全志芯片讨论区
你们使用的是官方的tina sdk吗？如果是的，首先你得确保lcd驱动是好的，再者，显示开机logo需要再uboot里面也加上lcd的配置，才会有logo显示的。
-
回复: T113 使用tina-linux uboot无法显示开机LOGO发布在 其它全志芯片讨论区
你参考那个手册配置的呀，能发出来看看吗，首先uboot显示logo不是这样配置的，首先要在uboot源码里面加上lcd驱动，然后打开相应的配置项才行哈。
-
100s，现在要点一个单纯spi接口的屏，这种屏是不是不能刷图呀发布在 Linux
第一次接触这种屏，就是有疑问，这种只通过spi进行通信，不经过tcon这一块，是不是不能刷图呀？这样应用层怎么去操作呢，没有fb设备，有弄过了大佬帮忙解答下困惑
-
回复: 100s,硬件定时器配置好寄存器后，一直不产生中断，这是什么原因，大家帮忙看看，非常感谢1发布在 Linux
现在使能了INTC_EN_REG0寄存器，现在中断有响应，但是提醒没有中断处理函数，这是什么原因？
writel(readl(INTC_EN_REG0)|(1<<14), INTC_EN_REG0);
-
回复: 100s 的tina 定时器精度只能到10ms，现在需要用gpio来模拟nec协议的红外发送，大家有什么好的建议吗？发布在 Linux
@aozima pwm？？？nec红外协议里面不是有us级别的电平翻转吗？
-
100s,硬件定时器配置好寄存器后，一直不产生中断，这是什么原因，大家帮忙看看，非常感谢1发布在 Linux
100s芯片内置的硬件定时器，配置了相关寄存器后，一直不触发中断，是哪里的问题，各位大佬帮忙看看,下面是部分驱动代码：
static irqreturn_t timer_handler(int irq, void *dev_id) { printk("%s %d %s\n",__FILE__,__LINE__,__FUNCTION__); writel(readl(TIMER_IRQ_ST_Register)|(1<<1), TIMER_IRQ_ST_Register);//清pending return IRQ_HANDLED; } static ssize_t hw_timer_write(struct file *file, const char __user *buf, size_t count, loff_t * ppos) { int val; copy_from_user(&val, buf, count); // copy_to_user(); writel(val, TIMER1_INTVAL_Rigster);//12000为定时1ms // printk("%x\n",readl(TIMER0_INTVAL_Rigster)); // printk("%x\n",readl(TIMER0_CNTVAL_Rigster)); /*24M,Single mode,2 precale*/ writel(0x94, TIMER1_CTRL_Rister); writel(readl(TIMER1_CTRL_Rister)|(1<<1), TIMER1_CTRL_Rister); while((readl(TIMER1_CTRL_Rister)>>1)&1); writel(readl(TIMER1_CTRL_Rister)|(1<<0), TIMER1_CTRL_Rister);//使能定时器 } static struct file_operations hw_timer_fops = { .owner = THIS_MODULE, /* 这是一个宏，推向编译模块时自动创建的__this_module变量 */ .open = hw_timer_open, .write = hw_timer_write, .read = hw_timer_read, }; int major; int init_timer_module(void) { int ret; major = register_chrdev(0, "hw_timer", &hw_timer_fops); hwtimerdrv_cls = class_create(THIS_MODULE, "hw_timer"); hwtimercls_device = device_create(hwtimerdrv_cls, NULL, MKDEV(major, 0), NULL, "timer0"); /* /dev/buttons */ TIMER_IRQ_EN_Register = (volatile unsigned long *)ioremap(TIMER_BASE+TIMER_IRQ_EN_REG,4); TIMER_IRQ_ST_Register = (volatile unsigned long *)ioremap(TIMER_BASE+TIMER_IRQ_ST_REG,4); TIMER1_CTRL_Rister = (volatile unsigned long *)ioremap(TIMER_BASE+TIMER_CTL_REG(1),4); TIMER1_INTVAL_Rigster = (volatile unsigned long *)ioremap(TIMER_BASE+TIMER_INTVAL_REG(1),4); TIMER1_CNTVAL_Rigster = (volatile unsigned long *)ioremap(TIMER_BASE+TIMER_CNTVAL_REG(1),4); // writel(1200000, TIMER0_INTVAL_Rigster);// writel(readl(TIMER_IRQ_EN_Register)|(1<<1), TIMER_IRQ_EN_Register);//使能定时器1中断 /*申请中断*/ if (request_irq(14, (irq_handler_t )timer_handler, 0,"sunxi_timer1", NULL)) { printk("irq request failure\n"); return -1; } return 0; } -
回复: 100s 的tina 定时器精度只能到10ms，现在需要用gpio来模拟nec协议的红外发送，大家有什么好的建议吗？发布在 Linux
@whycanservice 100s芯片不支持红外发送，只有IR-RX，所以才想要去模拟
-
100s 的tina 定时器精度只能到10ms，现在需要用gpio来模拟nec协议的红外发送，大家有什么好的建议吗？发布在 Linux
100s 的tina 定时器精度只能到10ms，现在需要用gpio来模拟nec协议的红外发送，IO口的翻转精度要求到us级别的，大家有什么好的建议吗？
-
回复: 请问一下，f133的Tina系统可以点1920x1080分辨率的mipi接口屏吗？发布在 D1系列-RISC-V
@godzhou0909 edp的吗？这个要看你用的那颗转换芯片，我的你也用不了呢，转换芯片，厂家应该会给你参考代码的，照着来应该问题不大
-
回复: R528LVDS接口输出怎么配置，在设备树里面配置了，感觉没有效果呀？发布在 Linux
@goodwill1945 不是吧，有这么巧的吗，如果确实是的，那我留下了调试笔记，照着来问题不大的呢，r528走之前LVDS是整完了的。
-
回复: R528LVDS接口输出怎么配置，在设备树里面配置了，感觉没有效果呀？发布在 Linux
@goodwill1945 当时整亮了，硬件问题，但是现在好久了，也没在之前的公司了。
这是当时的lcd配置，你可以参考一下，：
&lcd0 {
lcd_used = <1>;lcd_driver_name = "default_lcd"; lcd_backlight = <50>; lcd_if = <3>; lcd_x = <800>; lcd_y = <600>; lcd_width = <150>; lcd_height = <94>; lcd_dclk_freq = <40>; lcd_pwm_used = <1>; lcd_pwm_ch = <7>; lcd_pwm_freq = <50000>; lcd_pwm_pol = <1>; lcd_pwm_max_limit = <255>; /*lcd_bl_en = <&pio PD 20 GPIO_ACTIVE_HIGH>;*/ lcd_hbp = <46>; lcd_ht = <1501>; lcd_hspw = <10>; lcd_vbp = <23>; lcd_vt = <1270>; lcd_vspw = <5>; lcd_lvds_if = <0>; lcd_lvds_colordepth = <1>; lcd_lvds_mode = <0>; lcd_frm = <1>; lcd_hv_clk_phase = <0>; lcd_hv_sync_polarity= <0>; lcd_gamma_en = <0>; lcd_bright_curve_en = <0>; lcd_cmap_en = <0>; deu_mode = <0>; lcdgamma4iep = <22>; smart_color = <90>; pinctrl-0 = <&lvds0_pins_a>; pinctrl-1 = <&lvds0_pins_b>; }; -
100s tina，应用层运行会产生log，现在不接调试串口应用程序起不来，这是什么原因导致的？发布在 Linux
100s tina，应用程序运行会产生log，现在不接调试串口应用程序起不来，将运行log重定向到一个文件中，不接调试串口又可以起来，这是什么原因导致的？
-
tina系统的脚本rcS里面有用到source，为什么shell命令行没有source命令发布在 Linux
100s的tina系统的脚本rcS里面有用到source，为什么shell命令行没有source命令，用到RTP，要声明环境变量，只有shell命令行手动敲才有效，放脚本里们运行无效，这要怎么解？各位大佬指点指点
-
回复: tslib 电阻触摸屏调试!!!发布在 Linux
@whycan 晕哥，我使用tslib源码包里面的ts_uinput启动脚本他会提示这个问题：
root@TinaLinux:/# ./ts_uinput_start.sh
input: ts_uinput as /devices/virtual/input/input1
ts_uinput: See the kernel log for the device number
ls: tslib: WARNING: no multitouch using VARIANCE filter: No such file or directory
ts_uinput: Error creating event device
这上面提示说没有生成设备，但是单独运行，他是生成了event1的，好奇怪脚本
ts_uinput_start.sh ：
!/bin/shThis starts ts_uinput as a daemon and creates /dev/input/ts_uinput to use
as an evdev input device
TS_UINPUT_DEV_FILE=$(ts_uinput -d -v)
TS_UINPUT_DEV_FILE_CHECKED=$(ls "$TS_UINPUT_DEV_FILE" | grep 'event')if [ ! -z "$TS_UINPUT_DEV_FILE_CHECKED" ]
then
rm -f /dev/input/ts_uinput
ln -s $TS_UINPUT_DEV_FILE_CHECKED /dev/input/ts_uinput
else
echo "ts_uinput: Error creating event device"
exit 1
fiexit 0
-
回复: tslib 电阻触摸屏调试!!!发布在 Linux
@whycan 有的，生成了一个新设备event1
root@TinaLinux:/# ls /dev/input/event* -l
crw-rw---- 1 root root 13, 64 Jan 1 00:00 /dev/input/event0
crw-rw---- 1 root root 13, 65 Jan 1 00:03 /dev/input/event1
root@TinaLinux:/# -
回复: tslib 电阻触摸屏调试!!!发布在 Linux
@whycan 晕哥，我这边已经校准过了，然后ts_test坐标也对了，现在的问题就是ts_uinput虚拟出来的设备没有报点，这是什么原因？
root@TinaLinux:/# export TSLIB_CALIBFILE=/etc/pointercal;export TSLIB_CONFFILE=/ etc/ts.conf;export TSLIB_PLUGINDIR=/usr/lib/ts;export TSLIB_CONSOLEDEVICE=none;e xport TSLIB_FBDEVICE=/dev/fb0;export TSLIB_TSDEVICE=/dev/input/event0; root@TinaLinux:/# root@TinaLinux:/# root@TinaLinux:/# root@TinaLinux:/# ts_calibrate xres = 480, yres = 272 Took 15 samples... Top left : X = 3495 Y = 3300 Took 11 samples... Top right : X = 557 Y = 3183 Took 11 samples... Bot right : X = 609 Y = 823 Took 13 samples... Bot left : X = 3489 Y = 935 Took 14 samples... Center : X = 2013 Y = 2048 507.976929 -0.130559 -0.001265 279.929535 0.002867 -0.072775 Calibration constants: 33290776 -8556 -82 18345462 187 -4769 65536 root@TinaLinux:/# root@TinaLinux:/# root@TinaLinux:/# ts_test 94.175296: 459 237 255 94.175296: 459 237 255 94.185553: 458 237 255 94.195795: 458 237 255 94.206035: 457 238 255 94.216333: 457 239 255 94.226508: 457 239 255 94.236740: 457 240 255 94.246991: 458 240 255 94.350075: 458 239 0 94.773312: 440 93 255 94.773312: 440 93 255 94.783571: 441 92 255 94.890074: 439 91 0 ^Csignal 2 caught root@TinaLinux:/# root@TinaLinux:/# TSLIB_TSDEVICE=/dev/input/event0 ts_uinput & root@TinaLinux:/# tslib: WARNING: no multitouch using VARIANCE filinput: ts_uinput as /devices/virtual/input/input1 ter tslib: WARNING: no multitouch using VARIANCE filter root@TinaLinux:/# root@TinaLinux:/# root@TinaLinux:/# TSLIB_TSDEVICE=/dev/input/event1 ts_test ^Csignal 2 caught root@TinaLinux:/# root@TinaLinux:/etc# ./evtest No device specified, trying to scan all of /dev/input/event* Available devices: /dev/input/event0: 1c24800.sun3i-rtp /dev/input/event1: ts_uinput Select the device event number [0-1]: 1 Input driver version is 1.0.1 Input device ID: bus 0x6 vendor 0x0 product 0x0 version 0x0 Input device name: "ts_uinput" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 330 (BTN_TOUCH) Event type 3 (EV_ABS) Event code 48 (ABS_MT_TOUCH_MAJOR) Value 0 Min 0 Max 1000 Event code 53 (ABS_MT_POSITION_X) Value 0 Min 0 Max 479 Event code 54 (ABS_MT_POSITION_Y) Value 0 Min 0 Max 271 Properties: Testing ... (interrupt to exit) ^Croot@TinaLinux:/etc# -
tslib 电阻触摸屏调试!!!发布在 Linux
请问一下，电阻触摸屏，使用tslib校准后，查阅到可以通过ts_uinput 命令虚拟出一个event设备，应用层就直接可以通过这个设备来获取坐标了，不知道是否可行？使用后出现下面log：
root@TinaLinux:/# ts_uinput -n /dev/input/event1
tslib: WARNING: no multitouch using VARIANCE filter
open /dev/uinput: No such file or directory
Illegal instruction是不行？还是我应该在系统层面去生成一个/dev/uinput 设备，这需要打开哪项配置？
-
100s的RTP 电阻触摸屏调试发布在 Linux
校准坐标出错：
root@TinaLinux:/etc# export TSLIB_CALIBFILE=/etc/pointercal
root@TinaLinux:/etc# export TSLIB_CONFFILE=/etc/ts.conf
root@TinaLinux:/etc# export TSLIB_PLUGINDIR=/usr/lib/ts
root@TinaLinux:/etc# export TSLIB_CONSOLEDEVICE=/dev/ttyS2
root@TinaLinux:/etc# export TSLIB_FBDEVICE=/dev/fb0
root@TinaLinux:/etc# export TSLIB_TSDEVICE=/dev/input/event0
root@TinaLinux:/etc# ts_calibrate
open consoledevice: No such file or directory
KDSETMODE: Bad file descriptor现在evtest有坐标就是不准，想要校准坐标：
下面是设备树配置：
想要知道这几个参数是什么作用，第一次调电阻触摸，非常感谢！！！
-
请问一下，f133的Tina系统可以点1920x1080分辨率的mipi接口屏吗？发布在 D1系列-RISC-V
现在有一个1920x1080的edp屏，通过芯片转换，mipi转edp,它的时序dclk要配置到145M，tina可以配置到这个时序吗？,看用户手册里面没有mipi相关的寄存器
-
全志的tina系统有人做过同时兼容几款不同的屏和触摸的吗？发布在 Linux
请问一下，有没有办法实现tina系统在启动的时候做到去加载相应的驱动，根据接的不同屏和触摸？有做过的大佬给点思路和参考，非常感谢！
-
机器突然断电，但是板子上有一些电容，但是仍然会放电导致屏闪屏发布在 D1系列-RISC-V
机器突然断电，但是板子上有一些电容，但仍然会放电导致屏闪屏，有什么好的办法吗？软件/硬件分别有哪些方式来解决，各位大佬支支招
-
回复: Tina adb调试发布在 Linux
@whycan 你好，我现在按照这个方式出现如下报错：
root@TinaLinux:/# cat /sys/devices/platform/soc@3000000/soc@3000000\:usbc0@0/usb _device [ 593.130091] [ 593.130091] rmmod_device_driver [ 593.130091] [ 593.136883] rmmod_device_driver()222 WARN: get power supply failed [ 593.143937] android_work: sent uevent USB_STATE=DISCONNECTED [ 593.150587] [ 593.150587] insmod_device_driver [ 593.150587] device_chose finished! root@TinaLinux:/# [ 593.320672] sunxi_set_cur_vol_work()489 WARN: get power supply failed [ 593.357447] android_work: sent uevent USB_STATE=CONNECTED [ 593.370148] sunxi_set_cur_vol_work()489 WARN: get power supply failed [ 593.429780] configfs-gadget gadget: high-speed config #1: c [ 593.436336] android_work: sent uevent USB_STATE=CONFIGURED root@TinaLinux:/# adb adb_shell adbd root@TinaLinux:/# adb adb_shell adbd root@TinaLinux:/# adbd init adb main [adbd D]qemu_pipe_open: Could not open /dev/qemu_pipe: No such file or directory[adbd D]Handling main() Handling main() [adbd D]Warning: ADB_EXTERNAL_STORAGE is not set. Leaving EXTERNAL_STORAGE unchanged. cannot bind 'tcp:5037' root@TinaLinux:/# adbd init adb main [adbd D]qemu_pipe_open: Could not open /dev/qemu_pipe: No such file or directory[adbd D]Handling main() Handling main() [adbd D]Warning: ADB_EXTERNAL_STORAGE is not set. Leaving EXTERNAL_STORAGE unchanged. cannot bind 'tcp:5037' root@TinaLinux:/# adbd -D init adb main [adbd D]qemu_pipe_open: Could not open /dev/qemu_pipe: No such file or directory[adbd D]Handling main() Handling main() [adbd D]Warning: ADB_EXTERNAL_STORAGE is not set. Leaving EXTERNAL_STORAGE unchanged. cannot bind 'tcp:5037' -
请问一下，f1c100s的tina audio，我再配置时提示这个错误是什么原因？发布在 Linux
root@TinaLinux:/# tinymix contents
Number of controls: 41
ctl type num name value
0 INT 1 dac digital volume 32 (range 0->63)
1 BOOL 1 dac: right chanel en Off
2 BOOL 1 dac: left chanle en Off
3 BOOL 1 dac: right analog output mixer en Off
4 BOOL 1 dac: left analog output mixer en Off
5 BOOL 1 dac: right mute Off
6 BOOL 1 dac: left mute Off
7 BOOL 1 hp right source select: 0-dac, 1-mixer Off
8 BOOL 1 hp left source select: 0-dac, 1-mixer Off
9 BOOL 1 dac: right mixer mute: mic Off
10 BOOL 1 dac: right mixer mute: linein Off
11 BOOL 1 dac: right mixer mute: FM Off
12 BOOL 1 dac: right mixer mute: right dac Off
13 BOOL 1 dac: right mixer mute: left dac Off
14 BOOL 1 head phone power On
15 BOOL 1 dac: left mixer mute: mic Off
16 BOOL 1 dac: left mixer mute: linein Off
17 BOOL 1 dac: left mixer mute: FM Off
18 BOOL 1 dac: left mixer mute: right dac Off
19 BOOL 1 dac: left mixer mute: left dac Off
20 BOOL 1 dac: left hpout to right hpout On
21 BOOL 1 dac: right hpout to left hpout On
22 INT 1 head phone volume 63 (range 0->63)
23 INT 1 MICIN GAIN control 3 (range 0->7)
24 INT 1 LINEIN GAIN control 7 (range 0->7)
25 INT 1 ADC INPUT GAIN control 3 (range 0->7)
26 INT 1 COS slop time control for Anti-pop 1 (range 0->3)
27 BOOL 1 ADC mixer mute for mic Off
28 BOOL 1 ADC mixer mute for FML Off
29 BOOL 1 ADC mixer mute for FMR Off
30 BOOL 1 ADC mixer mute for linein Off
31 BOOL 1 ADC mixer mute for left ouput Off
32 BOOL 1 ADC mixer mute for right ouput Off
33 BOOL 1 ADC PA speed select On
34 INT 1 ADC FM volume 0 (range 0->7)
35 BOOL 1 ADC MIC Boost AMP en Off
36 INT 1 ADC MIC Boost AMP gain control 4 (range 0->7)
37 BOOL 1 SPK_L Mux Left Mixer en Off
38 BOOL 1 SPK_R Mux Right Mixer en Off
39 BOOL 1 External Speaker Switch Off
40 BOOL 1 Headphone Switch Off
root@TinaLinux:/# tinymix set 40 1
[ 1542.371564] sunxi-codec-machine sound.2: ASoC: DAPM unknown pin Headphone
root@TinaLinux:/#不能配置耳机的开关
-
回复: f133 tina PhoenixSuit 软件提示找到了设备，点击立即升级不能进入烧录模式，这是什么原因？发布在 D1系列-RISC-V
@wyljkl
uboot: efex
shell: reboot efex
都无效 -
f133 tina PhoenixSuit 软件提示找到了设备，点击立即升级不能进入烧录模式，这是什么原因？发布在 D1系列-RISC-V
f133 tina系统， PhoenixSuit 软件提示找到了设备，点击立即升级不能进入烧录模式，直接重新启动，这可能是什么原因？大佬们帮忙看看
-
f1c200s tina 使用tplayerdemo播放视频，启动是提示下面错误可能是什么原因？发布在 Linux
root@TinaLinux:/# tplayerdemo WARNING: awplayer <log_set_level:30>: Set log level to 3 DEBUG : awplayer <ReadPluginEntry:178>: read plugin entry adecoder-0 ok. DEBUG : awplayer <ReadPluginEntry:178>: read plugin entry adecoder-1 ok. DEBUG : awplayer <ReadPluginEntry:178>: read plugin entry adecoder-2 ok. DEBUG : awplayer <ReadPluginEntry:178>: read plugin entry adecoder-3 ok. DEBUG : awplayer <ReadPluginEntry:178>: read plugin entry adecoder-4 ok. DEBUG : awplayer <ReadPluginEntry:178>: read plugin entry adecoder-5 ok. DEBUG : awplayer <ReadPluginEntry:178>: read plugin entry adecoder-6 ok. DEBUG : awplayer <ReadPluginEntry:178>: read plugin entry adecoder-7 ok. DEBUG : awplayer <ReadPluginEntry:178>: read plugin entry adecoder-8 ok. DEBUG : awplayer <ReadPluginEntry:178>: read plugin entry adecoder-9 ok. DEBUG : awplayer <ReadPluginEntry:178>: read plugin entry adecoder-10 ok. DEBUG : awplayer <ReadPluginEntry:178>: read plugin entry adecoder-11 ok. DEBUG : awplayer <ReadPluginEntry:178>: read plugin entry adecoder-12 ok. DEBUG : awplayer <ReadPluginEntry:178>: read plugin entry adecoder-13 ok. DEBUG : awplayer <ReadPluginEntry:178>: read plugin entry adecoder-14 ok. DEBUG : awplayer <ReadPluginEntry:194>: read plugin entry adecoder-15 fail! DEBUG : awplayer <CdxPluginLoadList:221>: have config 15 entry DEBUG : awplayer <CdxPluginLoadList:222>: start to open adecoder lib DEBUG : awplayer <DlOpenPlugin:96>: plugin adecoder.aac comment is "aac_adecoder" DEBUG : awplayer <DlOpenPlugin:97>: plugin open lib: libaw_aacdec.so DEBUG : awplayer <AwStreamInit:97>: aw stream init... DEBUG : awplayer <AwStreamInit:131>: stream list size:6 INFO : awplayer <AwParserInit:399>: aw parser init... DEBUG : awplayer <AwParserInit:470>: aw parser size:17 DEBUG : awplayer <DlOpenPlugin:96>: plugin adecoder.alac comment is "alac_adecoder" DEBUG : awplayer <DlOpenPlugin:97>: plugin open lib: libaw_alacdec.so DEBUG : awplayer <DlOpenPlugin:96>: plugin adecoder.amr comment is "amr_adecoder" DEBUG : awplayer <DlOpenPlugin:97>: plugin open lib: libaw_amrdec.so DEBUG : awplayer <DlOpenPlugin:96>: plugin adecoder.ape comment is "ape_adecoder" DEBUG : awplayer <DlOpenPlugin:97>: plugin open lib: libaw_apedec.so DEBUG : awplayer <DlOpenPlugin:96>: plugin adecoder.flac comment is "flac_adecoder" DEBUG : awplayer <DlOpenPlugin:97>: plugin open lib: libaw_flacdec.so DEBUG : awplayer <DlOpenPlugin:96>: plugin adecoder.mp3 comment is "mp3_adecoder" DEBUG : awplayer <DlOpenPlugin:97>: plugin open lib: libaw_mp3dec.so DEBUG : awplayer <DlOpenPlugin:96>: plugin adecoder.ogg comment is "ogg_adecoder" DEBUG : awplayer <DlOpenPlugin:97>: plugin open lib: libaw_oggdec.so DEBUG : awplayer <DlOpenPlugin:96>: plugin adecoder.wav comment is "wav_adecoder" DEBUG : awplayer <DlOpenPlugin:97>: plugin open lib: libaw_wavdec.so DEBUG : awplayer <DlOpenPlugin:96>: plugin adecoder.atrc comment is "atrc_adecoder" DEBUG : awplayer <DlOpenPlugin:97>: plugin open lib: libaw_atrcdec.so DEBUG : awplayer <DlOpenPlugin:96>: plugin adecoder.cook comment is "cook_adecoder" DEBUG : awplayer <DlOpenPlugin:97>: plugin open lib: libaw_cookdec.so DEBUG : awplayer <DlOpenPlugin:96>: plugin adecoder.ra comment is "ra_adecoder" DEBUG : awplayer <DlOpenPlugin:97>: plugin open lib: libaw_radec.so DEBUG : awplayer <DlOpenPlugin:96>: plugin adecoder.sipr comment is "sipr_adecoder" DEBUG : awplayer <DlOpenPlugin:97>: plugin open lib: libaw_siprdec.so DEBUG : awplayer <DlOpenPlugin:96>: plugin adecoder.dsd comment is "dsd_adecoder" DEBUG : awplayer <DlOpenPlugin:97>: plugin open lib: libaw_dsddec.so DEBUG : awplayer <DlOpenPlugin:96>: plugin adecoder.g729 comment is "g729_adecoder" DEBUG : awplayer <DlOpenPlugin:97>: plugin open lib: libaw_g729dec.so DEBUG : awplayer <DlOpenPlugin:96>: plugin adecoder.opus comment is "opus_adecoder" DEBUG : awplayer <DlOpenPlugin:97>: plugin open lib: libaw_opusdec.so DEBUG : awplayer <CdxPluginLoadList:202>: Load Plugin list vdecoder DEBUG : awplayer <ReadPluginEntry:178>: read plugin entry vdecoder-0 ok. DEBUG : awplayer <ReadPluginEntry:178>: read plugin entry vdecoder-1 ok. DEBUG : awplayer <ReadPluginEntry:178>: read plugin entry vdecoder-2 ok. DEBUG : awplayer <ReadPluginEntry:178>: read plugin entry vdecoder-3 ok. DEBUG : awplayer <ReadPluginEntry:178>: read plugin entry vdecoder-4 ok. DEBUG : awplayer <ReadPluginEntry:178>: read plugin entry vdecoder-5 ok. DEBUG : awplayer <ReadPluginEntry:178>: read plugin entry vdecoder-6 ok. DEBUG : awplayer <ReadPluginEntry:178>: read plugin entry vdecoder-7 ok. DEBUG : awplayer <ReadPluginEntry:194>: read plugin entry vdecoder-8 fail! DEBUG : awplayer <CdxPluginLoadList:221>: have config 8 entry DEBUG : awplayer <CdxPluginLoadList:222>: start to open vdecoder lib DEBUG : awplayer <DlOpenPlugin:96>: plugin vdecoder.avs comment is "avs_vdecoder" DEBUG : awplayer <DlOpenPlugin:97>: plugin open lib: libawavs.so ERROR : awplayer <DlOpenPlugin:103>: dlopen 'libawavs.so' fail: Error loading shared library libawavs.so: No such file or directory DEBUG : awplayer <CdxPluginLoadList:231>: load vdecoder id vdecoder.avs fail! DEBUG : awplayer <DlOpenPlugin:96>: plugin vdecoder.h264 comment is "h264_vdecoder" DEBUG : awplayer <DlOpenPlugin:97>: plugin open lib: libawh264.so DEBUG : awplayer <DlOpenPlugin:116>: plugin init : CedarPluginVDInit warning: cedarc <VDecoderRegister:127>: register codec: '115:h264' success. DEBUG : awplayer <DlOpenPlugin:96>: plugin vdecoder.mjpeg comment is "mjpeg_vdecoder" DEBUG : awplayer <DlOpenPlugin:97>: plugin open lib: libawmjpeg.so DEBUG : awplayer <DlOpenPlugin:116>: plugin init : CedarPluginVDInit warning: cedarc <VDecoderRegister:127>: register codec: '101:mjpeg' success. DEBUG : awplayer <DlOpenPlugin:96>: plugin vdecoder.mpeg2 comment is "mpeg2_vdecoder" DEBUG : awplayer <DlOpenPlugin:97>: plugin open lib: libawmpeg2.so DEBUG : awplayer <DlOpenPlugin:116>: plugin init : CedarPluginVDInit warning: cedarc <VDecoderRegister:127>: register codec: '102:mpeg2' success. warning: cedarc <VDecoderRegister:127>: register codec: '103:mpeg2' success. DEBUG : awplayer <DlOpenPlugin:96>: plugin vdecoder.mpeg4base comment is "mpeg4base_vdecoder" DEBUG : awplayer <DlOpenPlugin:97>: plugin open lib: libawmpeg4base.so WARNING: awplayer <DlOpenPlugin:112>: Invalid plugin,function CedarPluginVDInit not found. DEBUG : awplayer <DlOpenPlugin:96>: plugin vdecoder.mpeg4dx comment is "mpeg4dx_vdecoder" DEBUG : awplayer <DlOpenPlugin:97>: plugin open lib: libawmpeg4dx.so DEBUG : awplayer <DlOpenPlugin:116>: plugin init : CedarPluginVDInit warning: cedarc <VDecoderRegister:127>: register codec: '105:mpeg4dx' success. warning: cedarc <VDecoderRegister:127>: register codec: '106:mpeg4dx' success. warning: cedarc <VDecoderRegister:127>: register codec: '107:mpeg4dx' success. warning: cedarc <VDecoderRegister:127>: register codec: '10e:mpeg4dx' success. warning: cedarc <VDecoderRegister:127>: register codec: '10f:mpeg4dx' success. DEBUG : awplayer <DlOpenPlugin:96>: plugin vdecoder.mpeg4h263 comment is "mpeg4h263_vdecoder" DEBUG : awplayer <DlOpenPlugin:97>: plugin open lib: libawmpeg4h263.so DEBUG : awplayer <DlOpenPlugin:116>: plugin init : CedarPluginVDInit warning: cedarc <VDecoderRegister:127>: register codec: '104:mpeg4H263' success. warning: cedarc <VDecoderRegister:127>: register codec: '10b:mpeg4H263' success. warning: cedarc <VDecoderRegister:127>: register codec: '10d:mpeg4H263' success. DEBUG : awplayer <DlOpenPlugin:96>: plugin vdecoder.mpeg4normal comment is "mpeg4normal_vdecoder" DEBUG : awplayer <DlOpenPlugin:97>: plugin open lib: libawmpeg4normal.so DEBUG : awplayer <DlOpenPlugin:116>: plugin init : CedarPluginVDInit warning: cedarc <VDecoderRegister:127>: register codec: '10a:mpeg4Normal' success. warning: cedarc <VDecoderRegister:127>: register codec: '10c:mpeg4Normal' success. warning: cedarc <VDecoderRegister:127>: register codec: '108:mpeg4Normal' success. warning: cedarc <VDecoderRegister:127>: register codec: '109:mpeg4Normal' success. DEBUG : awplayer <CdxPluginLoadList:202>: Load Plugin list plugin DEBUG : awplayer <ReadPluginEntry:194>: read plugin entry plugin-0 fail! DEBUG : awplayer <CdxPluginLoadList:221>: have config 0 entry DEBUG : awplayer <CdxPluginLoadList:222>: start to open plugin lib ****************************************************************************************** * This program implements a simple player, you can type commands to control the player. * To show what commands supported, type 'help'. ****************************************************************************************** >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> tina_multimedia <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< tag : tina3.5 branch: tina-dev date : Mon Jul 15 19:04:59 2019 +0800 Change-Id: I5f6c8a88d7b387a312b7744797a0d5f8ab07ee7a ------------------------------------------------------------------------------- DEBUG : tplayer <TPlayerCreate:193>: TPlayerCreate DEBUG : awplayer <XPlayerCreate:219>: XPlayerCreate. DEBUG : awplayer <LogVersionInfo:34>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CedarX <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< tag : CedarX-2.8.0 branch: master commit: 967535b8ff6a073cb4f38e85a4ae5fa6008014d8 date : Mon, 15 May 2017 01:30:22 +0000 (09:30 +0800) author: ---------------------------------------------------------------------- DEBUG : tsoundcontrol <TSoundDeviceCreate:147>: TinaSoundDeviceInit() DEBUG : tsoundcontrol <openSoundDevice:17>: openSoundDevice() in default style DEBUG : awplayer <LayerCreate:955>: LayerCreate. DEBUG : awplayer <LayerCreate:975>: ==== callback: 0xb6ef3e5c, pUser: 0xb6f947e0 DEBUG : awplayer <LayerCreate:986>: screen:w 480, screen:h 854 DEBUG : tsubtitlectrl <SubtitleCreate:84>: ==== pCallback: 0xb6ef3ccc, pUser: 0xb6f947e0 DEBUG : awplayer <XPlayerSetVideoSurfaceTexture:594>: setVideoSurfaceTexture, surface = 0x141000 DEBUG : awplayer <XPlayerThread:1906>: process message XPLAYER_COMMAND_SET_SURFACE. DEBUG : awplayer <XPlayerThread:1967>: ==== process message XPLAYER_COMMAND_SET_SUBCTRL. DEBUG : awplayer <PlayerSetSubCtrl:679>: === PlayerSetSubCtrl DEBUG : awplayer <XPlayerSetDeinterlace:695>: set deinterlace DEBUG : awplayer <XPlayerThread:1982>: ==== process message XPLAYER_COMMAND_SET_SUBCTRL. dd: writing '/dev/fb0': No space left on device ===》这里 6406+0 records in 6405+0 records out ^C -
回复: f133 tina4.0 sdk,发现一个很奇怪的现象，大佬们知道的帮忙解答一下，非常感谢发布在 D1系列-RISC-V
@wyljkl
我找到问题了，这个引脚的配置不能这样配置，改成这样就可以了，感谢各位大佬！
-
回复: f133 tina4.0 sdk,发现一个很奇怪的现象，大佬们知道的帮忙解答一下，非常感谢发布在 D1系列-RISC-V
@anruliu
刚才测量了下，uboot初始完后，reset脚和lcd_en使能脚直接变低了，没有保持高电平的状态。 -
回复: f133 tina4.0 sdk,发现一个很奇怪的现象，大佬们知道的帮忙解答一下，非常感谢发布在 D1系列-RISC-V
@anruliu 在 f133 tina4.0 sdk,发现一个很奇怪的现象，大佬们知道的帮忙解答一下，非常感谢 中说：
echo 1 > /sys/class/disp/disp/attr/colorbar
你好，配置了uboot开屏后，首先显示开机logo，然后内核disp初始化的时候背光是有的，但是不能正常显示了，刚才按照你上面提供的休眠唤醒后，屏可以正常显示。
这样的情况怎么去解决？能否提供个思路，我有个疑问，按照现在这个流程来走，uboot到kernel，uboot进行的mipi-dsi的屏指令初始化后，到内核部分屏的状态看现象貌似不能保存下来，还得重新初始化。
-
回复: f133 tina4.0 sdk,发现一个很奇怪的现象，大佬们知道的帮忙解答一下，非常感谢发布在 D1系列-RISC-V
@wyljkl
这是单独配置kernel:
0.364295] io scheduler mq-deadline registered
[ 0.364313] io scheduler kyber registered
[ 0.365732] [DISP]disp_module_init
[ 0.366698] disp 5000000.disp: Adding to iommu group 0
[ 0.367635] [DISP] parser_disp_init_para,line:1407:
[ 0.367641] of_property_read fb0_width fail
[ 0.415312] drivers/video/fbdev/sunxi/disp2/disp/lcd/K080_IM2HYL802R_800X1280.c 101 LCD_cfg_panel_info[ 0.415375] display_fb_request,fb_id:0 [ 0.427563] [DISP] Fb_copy_boot_fb,line:1443: [ 0.427569] no boot_fb0 [ 0.428177] drivers/video/fbdev/sunxi/disp2/disp/de/disp_lcd.c 2093 disp_lcd_enable [ 0.428249] disp_al_manager_apply ouput_type:0 [ 0.428698] [DISP] lcd_clk_config,line:774: [ 0.428716] disp 0, clk: pll(312000000),clk(312000000),dclk(52000000) dsi_rate(52000000) [ 0.428716] clk real:pll(312000000),clk(312000000),dclk(78000000) dsi_rate(150000000) [ 0.429498] drivers/video/fbdev/sunxi/disp2/disp/de/disp_lcd.c 2179 disp_lcd_enable [ 0.429513] drivers/video/fbdev/sunxi/disp2/disp/lcd/K080_IM2HYL802R_800X1280.c 158 LCD_open_flow [ 0.429528] drivers/video/fbdev/sunxi/disp2/disp/lcd/K080_IM2HYL802R_800X1280.c 180 LCD_power_on [ 0.430350] [DISP]disp_module_init finish [ 0.431778] sunxi_sid_init()563 - insmod ok [ 0.432619] pwm-regulator: supplied by regulator-dummy [ 0.436563] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pe not found, using dummy regulator [ 0.437093] uart uart0: uart0 supply uart not found, using dummy regulator [ 0.437780] uart0: ttyS0 at MMIO 0x2500000 (irq = 18, base_baud = 1500000) is a SUNXI [ 0.437815] sw_console_setup()1807 - console setup baud 115200 parity n bits 8, flow n [ 0.730743] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pd not found, using dummy regulator [ 0.839416] drivers/video/fbdev/sunxi/disp2/disp/lcd/K080_IM2HYL802R_800X1280.c 280 LCD_panel_init [ 1.182590] printk: console [ttyS0] enabled [ 1.188592] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pg not found, using dummy regulator [ 1.200417] uart uart1: uart1 supply uart not found, using dummy regulator [ 1.208798] uart1: ttyS1 at MMIO 0x2500400 (irq = 19, base_baud = 1500000) is a SUNXI [ 1.219206] uart uart3: uart3 supply uart not found, using dummy regulator [ 1.227924] uart3: ttyS3 at MMIO 0x2500c00 (irq = 21, base_baud = 1500000) is a SUNXI [ 1.238157] uart uart4: uart4 supply uart not found, using dummy regulator [ 1.246772] uart4: ttyS4 at MMIO 0x2501000 (irq = 22, base_baud = 1500000) is a SUNXI [ 1.258032] misc dump reg init [ 1.264268] [ADDR_MGT] addr_mgt_probe: module version: v1.0.11 [ 1.273037] [ADDR_MGT] addr_mgt_probe: success. [ 1.280527] sunxi-spinand: AW SPINand MTD Layer Version: 2.3 20211223 [ 1.288788] sunxi-spinand-phy: AW SPINand Phy Layer Version: 1.10 20200306 [ 1.296631] sunxi-spinand-phy: not detect any munufacture from id table [ 1.304248] sunxi-spinand-phy: get spi-nand Model from fdt fail [ 1.310934] sunxi-spinand-phy: get phy info from fdt fail [ 1.316947] sunxi-spinand-phy: not detect munufacture from fdt [ 1.323792] sunxi-spinand-phy: detect munufacture from id table: FM [ 1.330853] drivers/video/fbdev/sunxi/disp2/disp/lcd/K080_IM2HYL802R_800X1280.c 225 LCD_bl_open [ 1.340641] sunxi-spinand-phy: detect spinand id: 7f7fe4a1 ffffffff [ 1.348004] sunxi-spinand-phy: ========== arch info ========== [ 1.354535] sunxi-spinand-phy: Model: FM25S01A [ 1.360891] sunxi-spinand-phy: Munufacture: FM [ 1.366613] sunxi-spinand-phy/***************************************************************/
配置了uboot开屏：[ 0.365923] [DISP]disp_module_init [ 0.366900] disp 5000000.disp: Adding to iommu group 0 [ 0.367761] [DISP] parser_disp_init_para,line:1407: [ 0.367767] of_property_read fb0_width fail [ 0.367794] [DISP] disp_init,line:2331: [ 0.367800] smooth display screen:0 type:1 mode:4 [ 0.416425] drivers/video/fbdev/sunxi/disp2/disp/lcd/K080_IM2HYL802R_800X1280.c 101 LCD_cfg_panel_info [ 0.416488] display_fb_request,fb_id:0 [ 0.430910] Freeing logo buffer memory: 1500K [ 0.431528] drivers/video/fbdev/sunxi/disp2/disp/de/disp_lcd.c 2287 disp_lcd_sw_enable [ 0.431599] disp_al_manager_apply ouput_type:1 [ 0.431742] [DISP] lcd_clk_config,line:774: [ 0.431760] disp 0, clk: pll(312000000),clk(312000000),dclk(52000000) dsi_rate(52000000) [ 0.431760] clk real:pll(312000000),clk(312000000),dclk(78000000) dsi_rate(150000000) [ 0.432130] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pd not found, using dummy regulator [ 0.433274] [DISP]disp_module_init finish [ 0.434731] sunxi_sid_init()563 - insmod ok [ 0.435576] pwm-regulator: supplied by regulator-dummy [ 0.439564] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pe not found, using dummy regulator [ 0.440119] uart uart0: uart0 supply uart not found, using dummy regulator [ 0.441108] uart0: ttyS0 at MMIO 0x2500000 (irq = 18, base_baud = 1500000) is a SUNXI [ 0.441143] sw_console_setup()1807 - console setup baud 115200 parity n bits 8, flow n [ 1.171629] printk: console [ttyS0] enabled [ 1.177628] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pg not found, using dummy regulator [ 1.189533] uart uart1: uart1 supply uart not found, using dummy regulator [ 1.197924] uart1: ttyS1 at MMIO 0x2500400 (irq = 19, base_baud = 1500000) is a SUNXI [ 1.208418] uart uart3: uart3 supply uart not found, using dummy regulator [ 1.217228] uart3: ttyS3 at MMIO 0x2500c00 (irq = 21, base_baud = 1500000) is a SUNXI [ 1.227619] uart uart4: uart4 supply uart not found, using dummy regulator [ 1.236266] uart4: ttyS4 at MMIO 0x2501000 (irq = 22, base_baud = 1500000) is a SUNXI [ 1.247411] misc dump reg init -
回复: f133 tina4.0 sdk,发现一个很奇怪的现象，大佬们知道的帮忙解答一下，非常感谢发布在 D1系列-RISC-V
@xiaobai2458 在 f133 tina4.0 sdk,发现一个很奇怪的现象，大佬们知道的帮忙解答一下，非常感谢 中说：
@xiaobai2458
我这排除此问题原因有两个：
1、kernel dts 配置fb0_width被屏蔽了，code拿不到会失败return。
2、kernel dts 中配置了lcd_gpio_0和lcd_gpio_1用于mipi的设备的供电和reset功能，应交的active状态不正确，导致panel init读取这个引脚默认状态后把供电拉低。mipi屏相当于被断电了，但是背光有点。你好，问题解决了吗？我看配置了uboot开屏，直接不走LCD_open_flow这个流程来初始化屏幕了
-
回复: f133 tina4.0 sdk,发现一个很奇怪的现象，大佬们知道的帮忙解答一下，非常感谢发布在 D1系列-RISC-V
单纯配置kernel.txt
这是启动logo，配置了uoot的开屏，kernel的disp初始化开屏流程不一样，内核部分没有走LCD_open_flow这个流程了 -
回复: 【FAQ】全志D1芯片 如何移植 rtl8821cu wifi 驱动到 Linux-5.4内核？发布在 其它全志芯片讨论区
你好，现在正在移植wifi驱动到F133,在加载内核时出现了：
module uses symbol (kernel_read) from namespace VFS_internal_I_am_really_a_filesystem_and_am_NOT_a_driver, but does not import it.，看上面说的：
出现该 WANRING 的原因是内核版本升级后文件系统存在差异，驱动调用了 kernel_read（）和 kernel_write() 函数，需要进行 import VFS_internal_I_am_really_a_filesystem_and_am_NOT_a_driver 处理。
这个怎么操作？ -
回复: f133 tina4.0 sdk,发现一个很奇怪的现象，大佬们知道的帮忙解答一下，非常感谢发布在 D1系列-RISC-V
@yuzukitsuru 你好，配置了，我把uboot的显示部分取消掉，内核部分就能正常初始化，显示正常
-
回复: f133 tina4.0 sdk,发现一个很奇怪的现象，大佬们知道的帮忙解答一下，非常感谢发布在 D1系列-RISC-V
@whycanservice
但是内核部分显示部分没跑，屏直接灭了。 -
f133 tina4.0 sdk,发现一个很奇怪的现象，大佬们知道的帮忙解答一下，非常感谢发布在 D1系列-RISC-V
发现我把uboot2018的配置文件这个CONFIG_BOOT_GUI选上，内核部分disp部分直接不生效，取消掉配置它就生效了。好奇怪，uboot部分的显示跟内核会有冲突吗？
-
有哪位大佬能给我解答一下全志的一号通是什么吗？发布在 代码下载问题专区
有哪位大佬能给我解答一下全志的一号通是什么吗？全志技术支持让我从一号通上去下载文档，给个链接，我进去不了：
https://one.allwinnertech.com/#/doc?menuID=2
哪位大佬方便帮我下载一下，或者帮忙告诉一下怎么去登陆一号通 -
F133 tina sdk怎么增加新款spiflash支持，有没有大佬弄过，帮忙指点一下发布在 D1系列-RISC-V
现在要新支持一款spi-nand芯片，但是现在tina sdk不支持,怎么修改让其支持这款新的nandflash，复旦微的这颗：FM25S01A，有谁用过吗
