这个应该是以前平板时代留下来的产物。
总所周知,全志以前是做平板起家的。
做平板的时候,因为板子上本来就有emmc,量产卡就是把卡插进去,固件会自己烧到emmc上,然后再把量产卡拔出来,再启动的时候就用emmc上的固件启动,这张“量产卡”就可以用来烧下一台设备了。
启动卡就是插进去不动了,不会把固件移到emmc上,一直用这张启动卡启动,要是卡被拔出来了,就相当于 是板子没有系统了,就是一块砖头。
xiaowenge 发布的帖子
-
回复: 请问 PhoenixCard 烧卡软件的 【量产卡】与 【启动卡】菜单有什么区别呢?
-
回复: 把QtWebKit浏览器引擎移植到了D1上,内存消耗约80MB
@a44670 在 把QtWebKit浏览器引擎移植到了D1上,内存消耗约80MB 中说:
能够尽可能减少资源消耗。在打开jandan.net这样的网站时内存占用(VMRSS)大概在80MB左右。
我自己基于QtWebKit写了一个简单的浏览器,在Lichee 86 panel上测试通过,可以打开B站(不过还不能播放视频)。如果要可以播放视频,还要做哪些系统或者库的支持呢?
-
回复: 「RVBoards-哪吒」开启 SSH 和 VNC 远程访问,摆脱烦人的鼠标键盘显示器
@jiouo 在 「RVBoards-哪吒」开启 SSH 和 VNC 远程访问,摆脱烦人的鼠标键盘显示器 中说:
@liangdi RVBoards Debian是哪个系统可以推一个链接吗?
-
一些芯片模块简称的含义
CPU: Central Processing Unit,中央处理器
PSRAM: pseudo static ram
Nan: nand flash,与非型闪存
Nor: nor flash,或非型闪存
eMMC: Embedded Multi Media Card
PMU: Power Management Unit
vBat: Battery Voltage
CSI: Camera Serial Interface
RF: Ratio Frequency
TDM: Timing Division Multiplexing
Audio Codec: 音频编解码器
I2S/PCM: Inter-IC Sound/Pulse Code Modulation
DMIC: Digital MIC
SPDIF/OWA: Sony/Philips Digital Interface One Wire Audio
MAD: Mac Activity detector
AEC: adaptive echo cancellation, 自适应回声消除
CPUs: small CPU,通常说的小核,为主核提供辅助控制,如主核休眠时的唤醒控制等
CCU/PLL: CCU是旧的叫法,现在称为CCMU(Clock Control management unit)/Phase-Locked Loop
RTC: Real Time Clock
Timer: 定时器
DMA: Direction memory access
PSI: Peripheral System Interconnect
GIC: Generic Interrupt Controller
SS/CE: Security System/Crypto Engine
Trustzone : 安全空间
eFuse: Electrical Fuse, a one-time programmable memory
SRAM: Static Random Access Memory
BROM: Boot rom
LEDC: LED Controller
USB: Universal Serial Bus
GMAC: Giga Medium Access Control
UART: Universal Asynchronous Receiver Transmitter
SPI: Serial Peripheral Interface
TWI: Two Wire Interface,全志喜欢叫这个名字,其实就是I2C
RSB: Reduced serial bus
THS: Thermal Sensor
PWM: Pulse width modulation
LRADC: Low Resolution ADC
GPADC: General Purpose ADC
IR: Infrared Radiation
GPIO: General Purpose Input Output
PMIC: Power Management IC -
回复: 小哪吒产品规格共创
最新想法,已布线打板,并在上海risc-v峰会全志workshop上把牛逼吹出去了:
请教大佬,D1S不是没有HDMI吗,你引出的HDMI是RGB转换来的吗
之前有 现在没有了
-
回复: XR806 gitee仓库临时变更通知
下载代码:git clone git@gitee.com:moldy-potato-chips/devboard_device_allwinner_xr806.git
-
回复: XR806是否可用类似SDIO接口与CPU连接,并作为Linux的一个外设网卡设备?
@tigger 在 XR806是否可用类似SDIO接口与CPU连接,并作为Linux的一个外设网卡设备? 中说:
应该要固件支持才行,不知官方有没有释放对应的固件或者源码?
XR806有鸿蒙源码,可以自行操作sdio和主控通信
-
回复: R329的DSP开发如何申请?
@razor7788 在 R329的DSP开发如何申请? 中说:
@xiaowenge 这个授权是浮动的license (一般会规定同时支持几个人使用),你司应该还有一台license server 这个会绑定一个license规定能用多久。xplorer有中国区代理 申请后交钱就行了。
是的 ,我们是一个sever五个人可以用
-
回复: 【XR806开发板试用】全网首发,对接腾讯云平台的血泪史
@cszzlsw 在 【XR806开发板试用】全网首发,对接腾讯云平台的血泪史 中说:
后,论坛里的反响平平,好评没有,点赞更无,抱着已完成任务成功白嫖一块板子的心态,把板子收在了盒子里,第二天,助手小姐姐跟我说为何不把腾讯云的做了,对于这个要求我其实是拒绝的,但是小助手姐姐说写的好的话,会有奖励,当
反响平平可能是因为你走得太快了,其它人都还在编译电灯,而你都上云了,走在时代的前列线上,给你点赞!
-
回复: 全志神工具:DragonFace——可以动态修改固件的dts、sys_config.fex和分区配置等信息
@ricky 在 全志神工具:DragonFace——可以动态修改固件的dts、sys_config.fex和分区配置等信息 中说:
@xiaowenge 用这个工具需要密码。上哪儿获取?
ID是:E051B1773515085FCA4E5F009F9D1EB542464542增值服务,一机一密,可以找接口的FAE获取
-
XR806 gitee仓库临时变更通知
亲爱的各位开发者:
XR806代码正在走合入开源鸿蒙主仓流程,原仓库(https://gitee.com/openharmony-sig/devboard_device_allwinner_xr806)这几天会暂时不可用。
临时可用仓库链接:https://gitee.com/moldy-potato-chips/devboard_device_allwinner_xr806 -
回复: 带WiFi的【开源D1s开发板】来了,Xassette-Asterisk升级完成
原作者还是在校学生,好像还没有维护专门的群,可以来我们全志在线的群吹牛逼,作者也在群里,企鹅群号:498263967
-
回复: 全志神工具:DragonFace——可以动态修改固件的dts、sys_config.fex和分区配置等信息
工具简介:
固件修改工具(DragonFace)是一个高效的固件修改——功能强大、所见即所得、操作便易的工具。 只要是用于在某个发布固件中修改 OEM 厂家客户的需求,如固件版本信息、产品型号、公司名称等等。 工具还可以修改开机 logo、开机动画等等。除了这些可编辑的信息之外,还可以预制 oem 数据如预装 APK、文件等功能。DragonFace 还可根据用户的需求,修改固件包的板卡参数,让其适应自己的机器。 操作简洁方便。
-
全志神工具:DragonFace——可以动态修改固件的dts、sys_config.fex和分区配置等信息
全志神工具:DragonFace——可以动态修改固件的dts、sys_config.fex和分区配置等信息
还能改开机动画、logo、开机音乐等等,免编译调板子、bsp动态调试必备
-
回复: Tina进不去shell
“勾选的选项去除重新编译也会出现以上问题”说明不是这个地方导致的,你重新检查一下到底是哪里做了修改,不行就check out回去试一下,out目录下的内容重新删掉试一下
-
回复: 资源都够用情况下,选V3S还是D1S?
@suitjune 在 资源都够用情况下,选V3S还是D1S? 中说:
@xiaowenge 在 资源都够用情况下,选V3S还是D1S? 中说:
都够用当然选便宜的啦,而且你比较的只是芯片成本,还要考虑外围元器件成本
我也想用D1S,但是官方有D1S连接百兆PHY的参考设计吗,一直没找到,也没找到网友自己做的。
设计实现的问题工程师可以解决,但是钱的问题,工程师解决起来比较难
-
回复: D1哪吒v1.2测试固件,还没测试,邀请大家一起测试一下
@suitjune 在 D1哪吒v1.2测试固件,还没测试,邀请大家一起测试一下 中说:
@xiaowenge 在 D1哪吒v1.2测试固件,还没测试,邀请大家一起测试一下 中说:
D1哪吒v1.2测试固件,还没测试,邀请大家一起测试一下:
tina_d1-nezha_uart0_v1.2test20211206.img修改内容有:
2021年6月v1.01版本发布后-2021年11月期间全志内部Tina主分支更新的各种功能patch哪里可以下载到1.2的SDK?
还在测试,测完就会释放出来
-
D1哪吒v1.2测试固件,还没测试,邀请大家一起测试一下
D1哪吒v1.2测试固件,还没测试,邀请大家一起测试一下:
tina_d1-nezha_uart0_v1.2test20211206.img修改内容有:
2021年6月v1.01版本发布后-2021年11月期间全志内部Tina主分支更新的各种功能patch -
回复: Tina打包img出现过大的问题应该怎么设置
@cvwithd1 在 Tina打包img出现过大的问题应该怎么设置 中说:
@xiaowenge 请问这个应该怎么修改?vim打开是二进制文件。
打开那个.fex的配置文件,不是二进制的,vim可以打开
-
回复: F133评估版烧写固件后串口没有反应,求助
试下这个固件:
链接:https://pan.baidu.com/s/1jgrJ9RKLi6YAWmhjGB-aTA
提取码:5a9d
--来自百度网盘超级会员V1的分享
这个是Tina的SDK,不是量产版本的 -
回复: 我们使用d1解码h265 video过程遇到个crash问题
看着像片源的问题,从log看片源中间分辨率改变了,你们是否做了这方面的操作?播放的片源是什么格式的?
-
LicheeRV-哪吒计算条到到货,比苹果耳机还小,高性能移动RV算力即将覆盖全生态
LicheeRV-哪吒计算条到到货,比苹果耳机还小,高性能移动RV算力即将覆盖全生态
RV算力 一手掌握
-
群友测的D1哪吒开发板测试数据,因为年代久远老是搜索不到,我重新发一份
原贴链接:https://bbs.aw-ol.com/topic/181
虽然原贴主测试的数据,以上数据不代表官方数据,仅供大家参考,实际数据请结合自己的场景需求实测为准!
-
How to check Nezha board is OK or not?
Before Nezha leaving the factory, we will flash a Tina Linux System.
(You can download the firmware here:
https://www.aw-ol.com/downloads/resources/36)
Tina Linux is a system which customized for AIoT products by Allwinner.
And we will use this firmware to check whether the function of Nezha development board is all right.
Like this:
If every function is OK, it will restart and the Blue LED twinkling.
So you can also use this .img to check whether the function is OK. If the board is normal, the blue light will also flash.
*Tips. How to flash a firmware to Nezha board: https://d1.docs.aw-ol.com/en/study/study_4compile/#flashThe red light is on after the USB is inserted, which means that the power supply is normal. And the development board only needs 5V 0.5A(~2A) power supply to start the system. Therefore, PC usb is enough.
But if you insert a SD card, the D1 boot will check the SD card first. If there is a anther system in SD card, it will start the system in SD card first.
I can not sure weather system is in the SD card. So it is not certain whether this system will light up the LED light when it is turned on.
Many enthusiasts and organizations have transplanted the system into the Nezha board, such as :
Debian by PerfXLab(https://d1.docs.aw-ol.com/en/strong/strong_4debian/), Debian by Sipeed(https://d1.docs.aw-ol.com/en/strong/strong_6debianbysipeed/),
Fedora by RedHat(https://d1.docs.aw-ol.com/en/strong/strong_5Fedora/) and so on.
So you can use Tina linux to check the hardware of the borad is OK first.If you have any questions, you can come to our forum to communicate. There are many developers and our engineers. We have set up an English discussion area:
https://bbs.aw-ol.com/recent?cid[]=4 -
回复: 请问一下,D1平台,tina的kernel和标准的5.4kernel有哪些区别?
@hptsf kernel应该改动不大,linux kernel这么好的东西,一般能不动都不动的,除非系统起不来
-
回复: R329的DSP开发如何申请?
@razor7788 大佬分享一下授权经验,要怎么搞啊?
(我司虽然有candence的授权,但是都是商务法务搞好的,我只会无脑用,不知道怎么搞的,很好奇) -
回复: 基于星辰处理器的全志XR806鸿蒙开发板上手体验
@zhugx 可以的,IDE只是一个工具而已。头文件不知道在哪就要自己找一下了,有些IDE会支持转跳,可以自己选择一个顺手的IDE,用惯了效率就高了
-
回复: 【XR806鸿蒙开发实战1】实操下载XR806鸿蒙代码并编译烧写
@zhugx 可以参考在线文档里的hello word教程:https://xr806.docs.aw-ol.com/study/soft_helloword/ 手把手教你写第一个程序 hello word
-
回复: 基于星辰处理器的全志XR806鸿蒙开发板上手体验
@zhugx 可以参考在线文档里的hello word教程:https://xr806.docs.aw-ol.com/study/soft_helloword/
-
泰诺丰全志D1s开发板上线
泰诺丰科技基于全志D1s芯片设计的D1s芯片设计的D1s基础板上线。
淘宝链接:https://item.taobao.com/item.htm?spm=2013.1.w4004-24062560461.4.465ea71113gmfH&id=658797225022
-
回复: D1 开发板哪吒专用8寸MIPI 屏幕显示异常,质量问题?
请输入命令行进行测试:
cd /sys/kernel/debug/dispdbg echo disp0 > name; echo switch1 > command; echo 1 4 0 0 0x4 0x101 0 0 0 8 > param; echo 1 > start;
如果仍然出现异常线条,请淘宝发起退换货
参考文档:https://d1.docs.aw-ol.com/study/study_5connect/#_4 -
全志ISP调试工具介绍
TigerISP是一款专门用于全志专业图像质量调试的工具,可以通过局域网络连接单板在线调试 ISP 各个模块的参数,使用标定分析工具进行各类数据分析,使用 rtsp 工具实时预览图像效果等。
签了NDA的客户可以从全志量产工具平台(APST)上下载到ISP工具。如有需要后续会从全志在线全线开放。
在下载下来的工具包里有对应的调试说明文档《TigerISP使用指南》和《图像质量调优操作指南》,分别是教你如何使用这个工具和教你如果调出更好的ISP参数的。
教学视频见:https://www.aw-ol.com/training
【教学视频】初识ISP工具:
ISP深度教学视频共12集,见 全志在线-开发者学院-基础课程 :https://www.aw-ol.com/training
-
全志XR806开源鸿蒙开发板正式发售,免费开放全部源码和硬件设计资料
时维1024
序属金秋
雄州雾列
俊采星驰
浙有云栖大会
粤有HDC
皖有讯飞开发者节
共贺佳节,展科技力量。值此佳节,XR806开源鸿蒙开发板正式发售啦!
XR806开发板是基于XR806芯片设计开发的参考评估,支持OpenHarmony(开源鸿蒙)系统,具有集成度高、硬件设计简单、BOM成本低、安全可靠等特点。可广泛应用于智能家居、智慧楼宇、工业互联、儿童玩具、电子竞赛、极客DIY 等领域。
参数规格:
主控:XR806AF2L (Arm star ARMv8-M)
DDR:288KB SRAM
存储:160KB Code ROM. SIP 16Mbit Flash.
天线:板载WiFi/BT双天线,可共存为了方便开发者自由开发和定制化,全志在线释放了包括完整系统源码、硬件原理图、bomlist、硬件位号图在内的全部软硬件资料。
gittee仓库地址:https://gitee.com/openharmony-sig/devboard_device_allwinner_xr806
硬件资料下载地址:https://www.aw-ol.com/downloads?cat=12 -
一图看懂XR806鸿蒙系统架构
XR806支持的OpenHarmony属于 轻量系统(mini system)
轻量系统是面向MCU类处理器例如Arm Cortex-M、RISC-V 32位的设备,硬件资源极其有限,支持的设备最小内存为128KiB,可以提供多种轻量级网络协议,轻量级的图形框架,以及丰富的IOT总线读写部件等。可支撑的产品如智能家居领域的连接类模组、传感器设备、穿戴类设备等。
XR806-OpenHarmony系统框图如下:
从下到上分别是:
内核层(Kernel)- 系统驱动层(System Driver)- 系统服务层(System Server)-用户层(User Space)
内核层(Kernel)
内核层使用的是OpenHarmony的LiteOS-M。LiteOS-M内核是面向IoT领域构建的轻量级物联网操作系统内核,具有小体积、低功耗、高性能的特点。其代码结构简单,主要包括内核最小功能集、内核抽象层、可选组件以及工程目录等。OpenHarmony LiteOS-M内核架构包含硬件相关层以及硬件无关层,其中硬件相关层按不同编译工具链、芯片架构分类,提供统一的HAL(Hardware Abstraction Layer)接口,提升了硬件易适配性,满足AIoT类型丰富的硬件和编译工具链的拓展;其他模块属于硬件无关层,其中基础内核模块提供基础能力,扩展模块提供网络、文件系统等组件能力,还提供错误处理、调测等能力。
详见:https://www.openharmony.cn/#/documents/device-dev-kernel/device-dev-kernel-1/kernel-mini-overview
系统驱动层(System Driver)
系统驱动层主要提供安全、存储、时钟、音频和接口等模块的框架和驱动,包括:NOR Flash、Trust Zone、Flash Crypto、CE、EFUSE、PSRAM、CCM、PRCM、NVIC、Timer、RTC、WDG、XIP、DMA、Cache、Audio Codec、Smart Card、Cmsis Core、UART、PWM、I2C、I2S、GPIO、IR、SPI、GPADC等
系统服务层(System Server)
系统驱动层主要提供系统运行及用户层开发用到的基础系统框架、库和工具等。
作为核心功能,XR806 OpenHarmony SDK提供了完善的BLE协议栈和WiFi协议栈。
BLE部分包括BLE Controller、Link Layer/PHY Driver等。
WiFi部分包括WLAN Control、LMAC driver、UMAC、Supplicant、Hostpad等。
基于WiFi协议栈之上,对常用的网络服务进行了封装和支持,包括:TCP/IP Stack、Web Socket、MQTT、DNS、Mebed
TLS、HTTP Client、HTTP Server、iPerf、SNTP、DHCP、Ping、OTA等。除此之外,还提供了Audio Manager、EFPG、FDCM、CedarX、Reverb、ATCMD、Console、Voice Print、Secure Boot、CJson、PKG等。
在文件系统方面,可以支持FATFS、LittleFS、SPIFS三种不同的文件系统,可以在编译前在make menuconfig中选择编译。
用户层(User Space)
用户层为可供开发者进行应用开发的用户空间,SDK中提供了Command、Player APP、Recorder APP、Event Framework、Network Control等基础应用服务。同时开发者可以天马行空,在应用层挥洒创意。
-
回复: 【XR806鸿蒙开发实战1】实操下载XR806鸿蒙代码并编译烧写
编译lib完成后回到源码的根目录,完整编译
编译配置
hb set
这里可能要多敲一次回车才会出来这个选项框
选择wifi_skylake编译
hb build -f
编译完成后生成的固件在路径xr806_openharmony2/device/xradio/xr806/xr_skylark/out 下:
将 xr_system.img 烧写到设备中即可
-
回复: 【XR806鸿蒙开发实战1】实操下载XR806鸿蒙代码并编译烧写
@xiaowenge 在 实操下载XR806鸿蒙代码并编译烧写 中说:
make lib -j遇到亿点点问题,正在处理中
PDC-XRseries@AwExdroid94:~/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark$ make lib -j make[1]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/project/demo/wlan_ble_demo/gcc' cd ../../../..; make prj=demo/wlan_ble_demo include/generated/autoconf.h; cd - make[2]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark' make[3]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/tools/config' make[3]: 'conf' is up to date. make[3]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/tools/config' /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark # # No change to .config # NUPD .config NUPD include/generated/autoconf.h make[2]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark' /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/project/demo/wlan_ble_demo/gcc make __lib sdk_cfg_rdy=y make[2]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/project/demo/wlan_ble_demo/gcc' make -C ../../../../src install make[3]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src' make _install TARGET=install make[4]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src' make -C driver/chip install make -C libc install make -C image install make -C rom install make -C sys install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/driver/chip' make -C debug install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/libc' make -C driver/bluetooth install make -C ble install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/image' make -C pm install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/rom' make -C driver/component install make -C console install make -C efpg install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/sys' make -C fs install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/debug' make -C audio/pcm install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/pm' make -C audio/manager install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/driver/bluetooth' make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/ble' make -C net/ethernetif install make -C net/lwip-2.1.2 install make -C net/ping install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/driver/component' make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/console' make -C net/HTTPClient install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/efpg' make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/fs' make -C net/mbedtls-"2.16.8" install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/audio/pcm' make -C net/nopoll install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/audio/manager' make -C net/libwebsockets/lib install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/ethernetif' make -C net/mqtt install make -C net/shttpd-1.42 install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/lwip-2.1.2' **************************** ******* DIRS=./common ./tinycrypt/source/ ./porting ./net ./settings/source ******* **************************** make -C net/sntp install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/ping' make -C net/udhcp-0.9.8 install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/HTTPClient' make -C net/cloud/aliyun install make -C smartlink install make -C wlan install make -C atcmd install make -C cjson install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/udhcp-0.9.8' make -C util install make -C sdd install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/mqtt' make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/sntp' make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/nopoll' make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/cloud/aliyun' make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/mbedtls-2.16.8' make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/util' make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/shttpd-1.42' make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/sdd' ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o rom_core.o rom_core.c make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/libwebsockets/lib' make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/smartlink' make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/wlan' ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o console.o console.c make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/atcmd' ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o ethernetif.o ethernetif.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o audio_manager.o audio_manager.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o audio_pcm.o audio_pcm.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o ping.o ping.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o wrap_malloc.o wrap_malloc.c DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o fdcm.o fdcm.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -include ../../include/generated/autoconf.h -c -x assembler-with-cpp -o cpu.o cpu.s ../../../gcc.mk:230: recipe for target 'audio_manager.o' failed make[5]: *** [audio_manager.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/audio/manager' Makefile:112: recipe for target 'audio/manager' failed make[4]: *** [audio/manager] Error 2 make[4]: *** Waiting for unfinished jobs.... ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o sntp.o sntp.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o default/bt_ctrl_driver.o default/bt_ctrl_driver.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o coexist.o coexist.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o vfs.o vfs.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/cjson' DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o backtrace.o backtrace.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o pm.o pm.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../gcc.mk:230: recipe for target 'console.o' failed make[5]: *** [console.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/console' Makefile:112: recipe for target 'console' failed make[4]: *** [console] Error 2 ../../../gcc.mk:230: recipe for target 'audio_pcm.o' failed make[5]: *** [audio_pcm.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/audio/pcm' Makefile:112: recipe for target 'audio/pcm' failed make[4]: *** [audio/pcm] Error 2 ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o debug.o debug.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o wrap_stdio.o wrap_stdio.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o default/bt_zephyr_adapter.o default/bt_zephyr_adapter.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o spiffs/spiffs_cache.o spiffs/spiffs_cache.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o heap/common/sys_heap.o heap/common/sys_heap.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o atomic.o atomic.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o port.o port.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o flash.o flash.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o ad_button/drv_ad_button.o ad_button/drv_ad_button.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o wrap_time.o wrap_time.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DVERSION='"0.9.8"' -DXR_DHCPD -DDHCPD_LWIP -DDHCPD_HEAP_REPLACE_STACK -DDHCPD_USRCFG -DDHCPD_FREERTOS -DDHCPD_ICMPPING -DDHCPD_LOW_LEVEL -DDHCPD_DNS -DDHCPD_USE_DEFAULT_INIT -DDHCPD_UPGRADE_STA_MAC -DDHCPD_TIMEALT -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR=../../gcc.mk:230: recipe for target 'rom_core.o' failed make[5]: *** [rom_core.o] Error 126 "\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o usr_dhcpd.o usr_dhcpd.c make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/rom' ../../../gcc.mk:230: recipe for target 'ping.o' failed make[5]: *** [ping.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/ping' /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error Makefile:112: recipe for target 'rom' failed make[4]: *** [rom] Error 2 /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error Makefile:112: recipe for target 'net/ping' failed make[4]: *** [net/ping] Error 2 ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o efpg.o efpg.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o codec/ac101.o codec/ac101.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -I../../../include/net/mqtt/MQTTPacket -I../../../include/net/mqtt/MQTTClient-C -I./MQTTPacket -I./MQTTClient-C -I./MQTTClient-C/Xr_RTOS -I./MQTTClient-C/Xr_RTOS/utest -o MQTTClient-C/MQTTClient.o MQTTClient-C/MQTTClient.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -/bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o image.o image.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o heap/dma_heap/dma_heap.o heap/dma_heap/dma_heap.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../gcc.mk:230: recipe for target 'coexist.o' failed make[5]: *** [coexist.o] Error 126 ../../gcc.mk:230: recipe for target 'vfs.o' failed make[5]: *** [vfs.o] Error 126 make[5]: *** Waiting for unfinished jobs.... make[5]: *** Waiting for unfinished jobs.... ../../../gcc.mk:230: recipe for target 'sntp.o' failed make[5]: *** [sntp.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/sntp' ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -I../../project/ -o at_command.o at_command.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -I../../../include/net/nopoll -I./src -o src/nopoll.o src/nopoll.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DVERSION='"0.9.8"' -DXR_DHCPD -DDHCPD_LWIP -DDHCPD_HEAP_REPLACE_STACK -DDHCPD_USRCFG -DDHCPD_FREERTOS -DDHCPD_ICMPPING -DDHCPD_LOW_LEVEL -DDHCPD_DNS -DDHCPD_USE_DEFAULT_INIT -DDHCPD_UPGRADE_STA_MAC -DDHCPD_TIMEALT -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR=~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -"\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o arpping.o arpping.c DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o mbuf/mbuf_0.o mbuf/mbuf_0.c Makefile:112: recipe for target 'net/sntp' failed make[4]: *** [net/sntp] Error 2 ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o btsnoop.o btsnoop.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o codec/ac107.o codec/ac107.c ../../../gcc.mk:230: recipe for target 'default/bt_ctrl_driver.o' failed make[5]: *** [default/bt_ctrl_driver.o] Error 126 make[5]: *** Waiting for unfinished jobs.... ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DVERSION='"0.9.8"' -DXR_DHCPD -DDHCPD_LWIP -DDHCPD_HEAP_REPLACE_STACK -DDHCPD_USRCFG -DDHCPD_FREERTOS -DDHCPD_ICMPPING -DDHCPD_LOW_LEVEL -DDHCPD_DNS -DDHCPD_USE_DEFAULT_INIT -DDHCPD_UPGRADE_STA_MAC -DDHCPD_TIMEALT -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR=DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o bme280/bme280.o bme280/bme280.c "\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o files.o files.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -/bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -DCONFIG_ARM -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -I../../include/src/smartlink/alink/include/ -I../../include/ble -o airkiss/airkiss_ack.o airkiss/airkiss_ack.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -/bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -I../../project/ -o at_common.o at_common.c ../../gcc.mk:230: recipe for target 'heap/dma_heap/dma_heap.o' failed make[5]: *** [heap/dma_heap/dma_heap.o] Error 126 ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o codec/xradio_internal_codec.o codec/xradio_internal_codec.c ../../../gcc.mk:230: recipe for target 'usr_dhcpd.o' failed make[5]: *** [usr_dhcpd.o] Error 126 /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error make[5]: *** Waiting for unfinished jobs.... /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -/bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o mbuf/mbuf_0_mem.o mbuf/mbuf_0_mem.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -../../gcc.mk:230: recipe for target 'at_command.o' failed make[5]: *** [at_command.o] Error 126 DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../..//include -I../../../..//include/libc -I../../../..//include/driver/cmsis -I../../../..//include/net -I../../../..//include/net/lwip-2.1.2 -I../../../..//include/net/mbedtls-"2.16.8" -I../../../..//include/blec -I../../../..//include/ble -I../../../..//../../../../kernel/liteos_m -I../../../..//../../../../kernel/liteos_m/utils -I../../../..//../../../../kernel/liteos_m/kernel/arch/include -I../../../..//.. -o alink_auth.o alink_auth.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../gcc.mk:230: recipe for target 'wrap_time.o' failed make[5]: *** Waiting for unfinished jobs.... make[5]: *** [wrap_time.o] Error 126 ../../../gcc.mk:230: recipe for target 'codec/ac101.o' failed make[5]: *** [codec/ac101.o] Error 126 ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -make[5]: *** Waiting for unfinished jobs.... DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o sdd.o sdd.c make[5]: *** Waiting for unfinished jobs.... ../../gcc.mk:230: recipe for target 'fdcm.o' failed /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error make[5]: *** [fdcm.o] Error 126 /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../../gcc.mk:230: recipe for target 'ethernetif.o' failed make[5]: *** Waiting for unfinished jobs.... make[5]: *** [ethernetif.o] Error 126 ../../gcc.mk:230: recipe for target 'image.o' failed make[5]: *** [image.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/ethernetif' ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -/bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../gcc.mk:224: recipe for target 'cpu.o' failed ../../gcc.mk:230: recipe for target 'wrap_malloc.o' failed make[5]: *** [wrap_malloc.o] Error 126 make[5]: *** [cpu.o] Error 126 make[5]: *** Waiting for unfinished jobs.... ../../gcc.mk:230: recipe for target 'pm.o' failed ../../../gcc.mk:230: recipe for target 'default/bt_zephyr_adapter.o' failed DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -I../../../include/net/mqtt/MQTTPacket -I../../../include/net/mqtt/MQTTClient-C -I./MQTTPacket -I./MQTTClient-C -I./MQTTClient-C/Xr_RTOS -I./MQTTClient-C/Xr_RTOS/utest -o MQTTClient-C/Xr_RTOS/MQTTXrRTOS.o MQTTClient-C/Xr_RTOS/MQTTXrRTOS.c make[5]: *** [pm.o] Error 126 make[5]: *** [default/bt_zephyr_adapter.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/driver/bluetooth' ../../../gcc.mk:230: recipe for target 'arpping.o' failed /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error make[5]: *** [arpping.o] Error 126 Makefile:112: recipe for target 'net/ethernetif' failed make[4]: *** [net/ethernetif] Error 2 ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -DCONFIG_ARM -DZTEST_UNITTEST -DVIRTUAL_HCI -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -I../../include/ble -I../../src/ble/tinycrypt/include -I../../src/ble -I../../include/ble/drivers -I../../include/driver/chip -I../../include/ble/sys -I../../src/ble/settings -o host/hci_ecc.o host/hci_ecc.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -../../gcc.mk:230: recipe for target 'wrap_stdio.o' failed make[5]: *** [wrap_stdio.o] Error 126 DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -I../../../include/net/nopoll -I./src -o src/nopoll_FreeRTOS.o src/nopoll_FreeRTOS.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/libc' /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error Makefile:112: recipe for target 'driver/bluetooth' failed make[4]: *** [driver/bluetooth] Error 2 ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -I../../../include/net/HTTPClient -I../../../include/net/HTTPClient/API -o HTTPCUsr_api.o HTTPCUsr_api.c DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -I../../../include/net/shttpd/ -o examples/web_server_demo.o examples/web_server_demo.c ../../gcc.mk:230: recipe for target 'backtrace.o' failed ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -make[5]: *** [backtrace.o] Error 126 DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o save_log_by_uart.o save_log_by_uart.c make[5]: *** Waiting for unfinished jobs.... ../../gcc.mk:230: recipe for target 'debug.o' failed make[5]: *** [debug.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/debug' Makefile:112: recipe for target 'libc' failed ../../gcc.mk:230: recipe for target 'flash.o' failed make[5]: *** [flash.o] Error 126 make[4]: *** [libc] Error 2 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/image' Makefile:112: recipe for target 'debug' failed make[4]: *** [debug] Error 2 ../../gcc.mk:230: recipe for target 'atomic.o' failed ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -make[5]: *** [atomic.o] Error 126 DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -DCONFIG_ARM -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -I../../include/src/smartlink/alink/include/ -I../../include/ble -o airkiss/airkiss_discover.o airkiss/airkiss_discover.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -Makefile:112: recipe for target 'image' failed make[5]: *** Waiting for unfinished jobs.... DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o efpg_efuse.o efpg_efuse.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o cJSON.o cJSON.c make[4]: *** [image] Error 2 ../../gcc.mk:230: recipe for target 'heap/common/sys_heap.o' failed ../../gcc.mk:230: recipe for target 'btsnoop.o' failed ../../gcc.mk:230: recipe for target 'spiffs/spiffs_cache.o' failed make[5]: *** [heap/common/sys_heap.o] Error 126 make[5]: *** [btsnoop.o] Error 126 make[5]: *** [spiffs/spiffs_cache.o] Error 126 ../../../gcc.mk:230: recipe for target 'MQTTClient-C/MQTTClient.o' failed ../../gcc.mk:230: recipe for target 'efpg.o' failed make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/sys' make[5]: *** [efpg.o] Error 126 make[5]: *** [MQTTClient-C/MQTTClient.o] Error 126 make[5]: *** Waiting for unfinished jobs.... ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -make[5]: *** Waiting for unfinished jobs.... DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o bme280/drv_bme280.o bme280/drv_bme280.c make[5]: *** wait: No child processes. Stop. ../../gcc.mk:230: recipe for target 'port.o' failed /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error make[5]: *** [port.o] Error 126 ../../gcc.mk:230: recipe for target 'mbuf/mbuf_0.o' failed make[5]: *** [mbuf/mbuf_0.o] Error 126 make[5]: *** Waiting for unfinished jobs.... make[5]: *** wait: No child processes. Stop. Makefile:112: recipe for target 'sys' failed /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error make[4]: *** [sys] Error 2 ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -I../../../include/net/nopoll -I./src -o src/nopoll_conn.o src/nopoll_conn.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -I../../../include/net/HTTPClient -I../../../include/net/HTTPClient/API -o HTTPMbedTLSWrapper.o HTTPMbedTLSWrapper.c Makefile:112: recipe for target 'pm' failed ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -make[4]: *** [pm] Error 2 ../../../gcc.mk:230: recipe for target 'ad_button/drv_ad_button.o' failed DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -I../../../include/net/shttpd/ -o src/auth.o src/auth.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error Makefile:112: recipe for target 'fs' failed make[5]: *** [ad_button/drv_ad_button.o] Error 126 make[4]: *** [fs] Error 2 make[5]: *** Waiting for unfinished jobs.... /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -DCONFIG_ARM -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -I../../include/src/smartlink/alink/include/ -I../../include/ble -o airkiss/airkiss_main.o airkiss/airkiss_main.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -../../../gcc.mk:230: recipe for target 'codec/ac107.o' failed make[5]: *** [codec/ac107.o] Error 126 DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../..//include -I../../../..//include/libc -I../../../..//include/driver/cmsis -I../../../..//include/net -I../../../..//include/net/lwip-2.1.2 -I../../../..//include/net/mbedtls-"2.16.8" -I../../../..//include/blec -I../../../..//include/ble -I../../../..//../../../../kernel/liteos_m -I../../../..//../../../../kernel/liteos_m/utils -I../../../..//../../../../kernel/liteos_m/kernel/arch/include -I../../../..//.. -o alink_ca.o alink_ca.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../../gcc.mk:230: recipe for target 'bme280/bme280.o' failed make[5]: *** [bme280/bme280.o] Error 126 ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -DCONFIG_ARM -DZTEST_UNITTEST -DVIRTUAL_HCI -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -I../../include/ble -I../../src/ble/tinycrypt/include -I../../src/ble -I../../include/ble/drivers -I../../include/driver/chip -I../../include/ble/sys -I../../src/ble/settings -o host/settings.o host/settings.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../gcc.mk:230: recipe for target 'airkiss/airkiss_ack.o' failed make[5]: *** [airkiss/airkiss_ack.o] Error 126 make[5]: *** Waiting for unfinished jobs.... ../../../gcc.mk:230: recipe for target 'codec/xradio_internal_codec.o' failed make[5]: *** [codec/xradio_internal_codec.o] Error 126 ../../../gcc.mk:230: recipe for target 'files.o' failed make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/driver/chip' make[5]: *** [files.o] Error 126 ../../gcc.mk:230: recipe for target 'at_common.o' failed /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error make[5]: *** [at_common.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/udhcp-0.9.8' make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/atcmd' ../../gcc.mk:230: recipe for target 'mbuf/mbuf_0_mem.o' failed Makefile:112: recipe for target 'net/udhcp-0.9.8' failed make[5]: *** [mbuf/mbuf_0_mem.o] Error 126 make[4]: *** [net/udhcp-0.9.8] Error 2 Makefile:112: recipe for target 'driver/chip' failed make[4]: *** [driver/chip] Error 2 /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error Makefile:112: recipe for target 'atcmd' failed /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error make[4]: *** [atcmd] Error 2 make[5]: *** wait: No child processes. Stop. /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../../gcc.mk:230: recipe for target 'src/nopoll.o' failed make[5]: *** [src/nopoll.o] Error 126 make[5]: *** Waiting for unfinished jobs.... ../../../gcc.mk:230: recipe for target 'MQTTClient-C/Xr_RTOS/MQTTXrRTOS.o' failed /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error Makefile:112: recipe for target 'wlan' failed make[4]: *** [wlan] Error 2 ../../../gcc.mk:230: recipe for target 'src/nopoll_FreeRTOS.o' failed ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -../../gcc.mk:230: recipe for target 'save_log_by_uart.o' failed ../../../gcc.mk:230: recipe for target 'HTTPCUsr_api.o' failed make[5]: *** [save_log_by_uart.o] Error 126 DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../../include -I../../../../include/libc -I../../../../include/driver/cmsis -I../../../../include/net -I../../../../include/net/lwip-2.1.2 -I../../../../include/net/mbedtls-"2.16.8" -I../../../../include/blec -I../../../../include/ble -I../../../../../../../../kernel/liteos_m -I../../../../../../../../kernel/liteos_m/utils -I../../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../../.. -I../../../../include/net/libwebsockets -I../../../../include/net/libwebsockets/config -o alloc.o alloc.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -Wno-address -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTmake[5]: *** [HTTPCUsr_api.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/util' ../../../gcc.mk:230: recipe for target 'examples/web_server_demo.o' failed ../../gcc.mk:230: recipe for target 'airkiss/airkiss_discover.o' failed ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DMBEDTLS_CONFIG_FILE='<config-xr-mini-cliserv.h>' -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o src/api/api_lib.o src/api/api_lib.c make[5]: *** Waiting for unfinished jobs.... make[5]: *** [airkiss/airkiss_discover.o] Error 126 IN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -I../../../include/net/ -I../../../include/net/mbedtls-2.16.8/mbedtls/configs -o mbedtls.o mbedtls.c make[5]: *** [MQTTClient-C/Xr_RTOS/MQTTXrRTOS.o] Error 126 ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o json_test.o json_test.c make[5]: *** [src/nopoll_FreeRTOS.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/mqtt' make[5]: *** [examples/web_server_demo.o] Error 126 make[5]: *** Waiting for unfinished jobs.... ../../gcc.mk:230: recipe for target 'sdd.o' failed make[5]: *** [sdd.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/sdd' Makefile:112: recipe for target 'util' failed make[4]: *** [util] Error 2 Makefile:112: recipe for target 'net/mqtt' failed make[4]: *** [net/mqtt] Error 2 Makefile:112: recipe for target 'sdd' failed make[4]: *** [sdd] Error 2 /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../gcc.mk:230: recipe for target 'host/hci_ecc.o' failed make[5]: *** [host/hci_ecc.o] Error 126 make[5]: *** Waiting for unfinished jobs.... ../../../..//gcc.mk:230: recipe for target 'alink_auth.o' failed make[5]: *** [alink_auth.o] Error 126 make[5]: *** Waiting for unfinished jobs.... ../../gcc.mk:230: recipe for target 'efpg_efuse.o' failed make[5]: *** [efpg_efuse.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/efpg' Makefile:112: recipe for target 'efpg' failed make[4]: *** [efpg] Error 2 /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../../include -I../../../../include/libc -I../../../../include/driver/cmsis -I../../../../include/net -I../../../../include/net/lwip-2.1.2 -I../../../../include/net/mbedtls-"2.16.8" -I../../../../include/blec -I../../../../include/ble -I../../../../../../../../kernel/liteos_m -I../../../../../../../../kernel/liteos_m/utils -I../../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../../.. -I../../../../include/net/libwebsockets -I../../../../include/net/libwebsockets/config -o context.o context.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -Wno-address -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o src/api/api_msg.o src/api/api_msg.c ../../../gcc.mk:230: recipe for target 'HTTPMbedTLSWrapper.o' failed make[5]: *** [HTTPMbedTLSWrapper.o] Error 126 ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DMBEDTLS_CONFIG_FILE='<config-xr-mini-cliserv.h>' -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -I../../../include/net/ -I../../../include/net/mbedtls-2.16.8/mbedtls/configs -o library/aes.o library/aes.c make[5]: *** wait: No child processes. Stop. /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../gcc.mk:230: recipe for target 'cJSON.o' failed Makefile:112: recipe for target 'net/HTTPClient' failed make[4]: *** [net/HTTPClient] Error 2 make[5]: *** [cJSON.o] Error 126 make[5]: *** Waiting for unfinished jobs.... ../../../gcc.mk:230: recipe for target 'src/auth.o' failed make[5]: *** [src/auth.o] Error 126 make[5]: *** wait: No child processes. Stop. /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error Makefile:112: recipe for target 'net/shttpd-1.42' failed make[4]: *** [net/shttpd-1.42] Error 2 ../../gcc.mk:230: recipe for target 'airkiss/airkiss_main.o' failed make[5]: *** [airkiss/airkiss_main.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/smartlink' /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../../..//gcc.mk:230: recipe for target 'alink_ca.o' failed make[5]: *** [alink_ca.o] Error 126 /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error Makefile:112: recipe for target 'smartlink' failed make[5]: *** wait: No child processes. Stop. make[4]: *** [smartlink] Error 2 /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -../../../gcc.mk:230: recipe for target 'src/nopoll_conn.o' failed make[5]: *** [src/nopoll_conn.o] Error 126 DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../../include -I../../../../include/libc -I../../../../include/driver/cmsis -I../../../../include/net -I../../../../include/net/lwip-2.1.2 -I../../../../include/net/mbedtls-"2.16.8" -I../../../../include/blec -I../../../../include/ble -I../../../../../../../../kernel/liteos_m -I../../../../../../../../kernel/liteos_m/utils -I../../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../../.. -I../../../../include/net/libwebsockets -I../../../../include/net/libwebsockets/config -o handshake.o handshake.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -Wno-address -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTmake[5]: *** wait: No child processes. Stop. R="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o src/api/err.o src/api/err.c ../../../gcc.mk:230: recipe for target 'bme280/drv_bme280.o' failed Makefile:112: recipe for target 'net/cloud/aliyun' failed make[5]: *** [bme280/drv_bme280.o] Error 126 make[4]: *** [net/cloud/aliyun] Error 2 ../../gcc.mk:230: recipe for target 'host/settings.o' failed make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/driver/component' make[5]: *** [host/settings.o] Error 126 make[5]: *** wait: No child processes. Stop. Makefile:112: recipe for target 'net/nopoll' failed make[4]: *** [net/nopoll] Error 2 /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error Makefile:112: recipe for target 'driver/component' failed ../../../gcc.mk:230: recipe for target 'mbedtls.o' failed make[4]: *** [driver/component] Error 2 make[5]: *** [mbedtls.o] Error 126 /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error make[5]: *** Waiting for unfinished jobs.... Makefile:112: recipe for target 'ble' failed make[4]: *** [ble] Error 2 ../../gcc.mk:230: recipe for target 'json_test.o' failed make[5]: *** [json_test.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/cjson' ../../../../gcc.mk:230: recipe for target 'alloc.o' failed make[5]: *** [alloc.o] Error 126 make[5]: *** Waiting for unfinished jobs.... Makefile:112: recipe for target 'cjson' failed make[4]: *** [cjson] Error 2 ../../../gcc.mk:230: recipe for target 'src/api/api_lib.o' failed make[5]: *** [src/api/api_lib.o] Error 126 make[5]: *** Waiting for unfinished jobs.... /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../../gcc.mk:230: recipe for target 'src/api/api_msg.o' failed make[5]: *** [src/api/api_msg.o] Error 126 ../../../gcc.mk:230: recipe for target 'library/aes.o' failed make[5]: *** [library/aes.o] Error 126 make[5]: *** wait: No child processes. Stop. ../../../../gcc.mk:230: recipe for target 'context.o' failed make[5]: *** [context.o] Error 126 Makefile:112: recipe for target 'net/mbedtls-"2.16.8"' failed make[4]: *** [net/mbedtls-"2.16.8"] Error 2 /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../../../gcc.mk:230: recipe for target 'handshake.o' failed make[5]: *** [handshake.o] Error 126 make[5]: *** wait: No child processes. Stop. ../../../gcc.mk:230: recipe for target 'src/api/err.o' failed make[5]: *** [src/api/err.o] Error 126 Makefile:112: recipe for target 'net/libwebsockets/lib' failed make[5]: *** wait: No child processes. Stop. make[4]: *** [net/libwebsockets/lib] Error 2 Makefile:112: recipe for target 'net/lwip-2.1.2' failed make[4]: *** [net/lwip-2.1.2] Error 2 make[4]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src' Makefile:103: recipe for target 'install' failed make[3]: *** [install] Error 2 make[3]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src' ../../../../project/project.mk:460: recipe for target '__lib' failed make[2]: *** [__lib] Error 2 make[2]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/project/demo/wlan_ble_demo/gcc' ../../../../project/project.mk:463: recipe for target '__lib' failed make[1]: *** [__lib] Error 2 make[1]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/project/demo/wlan_ble_demo/gcc' Makefile:152: recipe for target 'lib' failed make: *** [lib] Error 2
这个问题应该是编译工具链路径没配置号造成的,遇到同样问题可以检查一下编译工具链
-
回复: 【XR806鸿蒙开发实战1】实操下载XR806鸿蒙代码并编译烧写
make lib -j遇到亿点点问题,正在处理中
PDC-XRseries@AwExdroid94:~/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark$ make lib -j make[1]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/project/demo/wlan_ble_demo/gcc' cd ../../../..; make prj=demo/wlan_ble_demo include/generated/autoconf.h; cd - make[2]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark' make[3]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/tools/config' make[3]: 'conf' is up to date. make[3]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/tools/config' /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark # # No change to .config # NUPD .config NUPD include/generated/autoconf.h make[2]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark' /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/project/demo/wlan_ble_demo/gcc make __lib sdk_cfg_rdy=y make[2]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/project/demo/wlan_ble_demo/gcc' make -C ../../../../src install make[3]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src' make _install TARGET=install make[4]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src' make -C driver/chip install make -C libc install make -C image install make -C rom install make -C sys install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/driver/chip' make -C debug install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/libc' make -C driver/bluetooth install make -C ble install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/image' make -C pm install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/rom' make -C driver/component install make -C console install make -C efpg install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/sys' make -C fs install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/debug' make -C audio/pcm install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/pm' make -C audio/manager install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/driver/bluetooth' make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/ble' make -C net/ethernetif install make -C net/lwip-2.1.2 install make -C net/ping install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/driver/component' make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/console' make -C net/HTTPClient install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/efpg' make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/fs' make -C net/mbedtls-"2.16.8" install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/audio/pcm' make -C net/nopoll install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/audio/manager' make -C net/libwebsockets/lib install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/ethernetif' make -C net/mqtt install make -C net/shttpd-1.42 install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/lwip-2.1.2' **************************** ******* DIRS=./common ./tinycrypt/source/ ./porting ./net ./settings/source ******* **************************** make -C net/sntp install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/ping' make -C net/udhcp-0.9.8 install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/HTTPClient' make -C net/cloud/aliyun install make -C smartlink install make -C wlan install make -C atcmd install make -C cjson install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/udhcp-0.9.8' make -C util install make -C sdd install make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/mqtt' make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/sntp' make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/nopoll' make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/cloud/aliyun' make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/mbedtls-2.16.8' make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/util' make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/shttpd-1.42' make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/sdd' ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o rom_core.o rom_core.c make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/libwebsockets/lib' make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/smartlink' make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/wlan' ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o console.o console.c make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/atcmd' ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o ethernetif.o ethernetif.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o audio_manager.o audio_manager.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o audio_pcm.o audio_pcm.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o ping.o ping.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o wrap_malloc.o wrap_malloc.c DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o fdcm.o fdcm.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -include ../../include/generated/autoconf.h -c -x assembler-with-cpp -o cpu.o cpu.s ../../../gcc.mk:230: recipe for target 'audio_manager.o' failed make[5]: *** [audio_manager.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/audio/manager' Makefile:112: recipe for target 'audio/manager' failed make[4]: *** [audio/manager] Error 2 make[4]: *** Waiting for unfinished jobs.... ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o sntp.o sntp.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o default/bt_ctrl_driver.o default/bt_ctrl_driver.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o coexist.o coexist.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o vfs.o vfs.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -make[5]: Entering directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/cjson' DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o backtrace.o backtrace.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o pm.o pm.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../gcc.mk:230: recipe for target 'console.o' failed make[5]: *** [console.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/console' Makefile:112: recipe for target 'console' failed make[4]: *** [console] Error 2 ../../../gcc.mk:230: recipe for target 'audio_pcm.o' failed make[5]: *** [audio_pcm.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/audio/pcm' Makefile:112: recipe for target 'audio/pcm' failed make[4]: *** [audio/pcm] Error 2 ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o debug.o debug.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o wrap_stdio.o wrap_stdio.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o default/bt_zephyr_adapter.o default/bt_zephyr_adapter.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o spiffs/spiffs_cache.o spiffs/spiffs_cache.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o heap/common/sys_heap.o heap/common/sys_heap.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o atomic.o atomic.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o port.o port.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o flash.o flash.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o ad_button/drv_ad_button.o ad_button/drv_ad_button.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o wrap_time.o wrap_time.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DVERSION='"0.9.8"' -DXR_DHCPD -DDHCPD_LWIP -DDHCPD_HEAP_REPLACE_STACK -DDHCPD_USRCFG -DDHCPD_FREERTOS -DDHCPD_ICMPPING -DDHCPD_LOW_LEVEL -DDHCPD_DNS -DDHCPD_USE_DEFAULT_INIT -DDHCPD_UPGRADE_STA_MAC -DDHCPD_TIMEALT -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR=../../gcc.mk:230: recipe for target 'rom_core.o' failed make[5]: *** [rom_core.o] Error 126 "\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o usr_dhcpd.o usr_dhcpd.c make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/rom' ../../../gcc.mk:230: recipe for target 'ping.o' failed make[5]: *** [ping.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/ping' /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error Makefile:112: recipe for target 'rom' failed make[4]: *** [rom] Error 2 /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error Makefile:112: recipe for target 'net/ping' failed make[4]: *** [net/ping] Error 2 ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o efpg.o efpg.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o codec/ac101.o codec/ac101.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -I../../../include/net/mqtt/MQTTPacket -I../../../include/net/mqtt/MQTTClient-C -I./MQTTPacket -I./MQTTClient-C -I./MQTTClient-C/Xr_RTOS -I./MQTTClient-C/Xr_RTOS/utest -o MQTTClient-C/MQTTClient.o MQTTClient-C/MQTTClient.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -/bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o image.o image.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o heap/dma_heap/dma_heap.o heap/dma_heap/dma_heap.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../gcc.mk:230: recipe for target 'coexist.o' failed make[5]: *** [coexist.o] Error 126 ../../gcc.mk:230: recipe for target 'vfs.o' failed make[5]: *** [vfs.o] Error 126 make[5]: *** Waiting for unfinished jobs.... make[5]: *** Waiting for unfinished jobs.... ../../../gcc.mk:230: recipe for target 'sntp.o' failed make[5]: *** [sntp.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/sntp' ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -I../../project/ -o at_command.o at_command.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -I../../../include/net/nopoll -I./src -o src/nopoll.o src/nopoll.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DVERSION='"0.9.8"' -DXR_DHCPD -DDHCPD_LWIP -DDHCPD_HEAP_REPLACE_STACK -DDHCPD_USRCFG -DDHCPD_FREERTOS -DDHCPD_ICMPPING -DDHCPD_LOW_LEVEL -DDHCPD_DNS -DDHCPD_USE_DEFAULT_INIT -DDHCPD_UPGRADE_STA_MAC -DDHCPD_TIMEALT -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR=~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -"\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o arpping.o arpping.c DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o mbuf/mbuf_0.o mbuf/mbuf_0.c Makefile:112: recipe for target 'net/sntp' failed make[4]: *** [net/sntp] Error 2 ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o btsnoop.o btsnoop.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o codec/ac107.o codec/ac107.c ../../../gcc.mk:230: recipe for target 'default/bt_ctrl_driver.o' failed make[5]: *** [default/bt_ctrl_driver.o] Error 126 make[5]: *** Waiting for unfinished jobs.... ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DVERSION='"0.9.8"' -DXR_DHCPD -DDHCPD_LWIP -DDHCPD_HEAP_REPLACE_STACK -DDHCPD_USRCFG -DDHCPD_FREERTOS -DDHCPD_ICMPPING -DDHCPD_LOW_LEVEL -DDHCPD_DNS -DDHCPD_USE_DEFAULT_INIT -DDHCPD_UPGRADE_STA_MAC -DDHCPD_TIMEALT -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR=DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o bme280/bme280.o bme280/bme280.c "\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o files.o files.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -/bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -DCONFIG_ARM -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -I../../include/src/smartlink/alink/include/ -I../../include/ble -o airkiss/airkiss_ack.o airkiss/airkiss_ack.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -/bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -I../../project/ -o at_common.o at_common.c ../../gcc.mk:230: recipe for target 'heap/dma_heap/dma_heap.o' failed make[5]: *** [heap/dma_heap/dma_heap.o] Error 126 ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o codec/xradio_internal_codec.o codec/xradio_internal_codec.c ../../../gcc.mk:230: recipe for target 'usr_dhcpd.o' failed make[5]: *** [usr_dhcpd.o] Error 126 /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error make[5]: *** Waiting for unfinished jobs.... /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -/bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o mbuf/mbuf_0_mem.o mbuf/mbuf_0_mem.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -../../gcc.mk:230: recipe for target 'at_command.o' failed make[5]: *** [at_command.o] Error 126 DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../..//include -I../../../..//include/libc -I../../../..//include/driver/cmsis -I../../../..//include/net -I../../../..//include/net/lwip-2.1.2 -I../../../..//include/net/mbedtls-"2.16.8" -I../../../..//include/blec -I../../../..//include/ble -I../../../..//../../../../kernel/liteos_m -I../../../..//../../../../kernel/liteos_m/utils -I../../../..//../../../../kernel/liteos_m/kernel/arch/include -I../../../..//.. -o alink_auth.o alink_auth.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../gcc.mk:230: recipe for target 'wrap_time.o' failed make[5]: *** Waiting for unfinished jobs.... make[5]: *** [wrap_time.o] Error 126 ../../../gcc.mk:230: recipe for target 'codec/ac101.o' failed make[5]: *** [codec/ac101.o] Error 126 ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -make[5]: *** Waiting for unfinished jobs.... DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o sdd.o sdd.c make[5]: *** Waiting for unfinished jobs.... ../../gcc.mk:230: recipe for target 'fdcm.o' failed /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error make[5]: *** [fdcm.o] Error 126 /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../../gcc.mk:230: recipe for target 'ethernetif.o' failed make[5]: *** Waiting for unfinished jobs.... make[5]: *** [ethernetif.o] Error 126 ../../gcc.mk:230: recipe for target 'image.o' failed make[5]: *** [image.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/ethernetif' ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -/bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../gcc.mk:224: recipe for target 'cpu.o' failed ../../gcc.mk:230: recipe for target 'wrap_malloc.o' failed make[5]: *** [wrap_malloc.o] Error 126 make[5]: *** [cpu.o] Error 126 make[5]: *** Waiting for unfinished jobs.... ../../gcc.mk:230: recipe for target 'pm.o' failed ../../../gcc.mk:230: recipe for target 'default/bt_zephyr_adapter.o' failed DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -I../../../include/net/mqtt/MQTTPacket -I../../../include/net/mqtt/MQTTClient-C -I./MQTTPacket -I./MQTTClient-C -I./MQTTClient-C/Xr_RTOS -I./MQTTClient-C/Xr_RTOS/utest -o MQTTClient-C/Xr_RTOS/MQTTXrRTOS.o MQTTClient-C/Xr_RTOS/MQTTXrRTOS.c make[5]: *** [pm.o] Error 126 make[5]: *** [default/bt_zephyr_adapter.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/driver/bluetooth' ../../../gcc.mk:230: recipe for target 'arpping.o' failed /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error make[5]: *** [arpping.o] Error 126 Makefile:112: recipe for target 'net/ethernetif' failed make[4]: *** [net/ethernetif] Error 2 ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -DCONFIG_ARM -DZTEST_UNITTEST -DVIRTUAL_HCI -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -I../../include/ble -I../../src/ble/tinycrypt/include -I../../src/ble -I../../include/ble/drivers -I../../include/driver/chip -I../../include/ble/sys -I../../src/ble/settings -o host/hci_ecc.o host/hci_ecc.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -../../gcc.mk:230: recipe for target 'wrap_stdio.o' failed make[5]: *** [wrap_stdio.o] Error 126 DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -I../../../include/net/nopoll -I./src -o src/nopoll_FreeRTOS.o src/nopoll_FreeRTOS.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/libc' /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error Makefile:112: recipe for target 'driver/bluetooth' failed make[4]: *** [driver/bluetooth] Error 2 ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -I../../../include/net/HTTPClient -I../../../include/net/HTTPClient/API -o HTTPCUsr_api.o HTTPCUsr_api.c DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -I../../../include/net/shttpd/ -o examples/web_server_demo.o examples/web_server_demo.c ../../gcc.mk:230: recipe for target 'backtrace.o' failed ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -make[5]: *** [backtrace.o] Error 126 DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o save_log_by_uart.o save_log_by_uart.c make[5]: *** Waiting for unfinished jobs.... ../../gcc.mk:230: recipe for target 'debug.o' failed make[5]: *** [debug.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/debug' Makefile:112: recipe for target 'libc' failed ../../gcc.mk:230: recipe for target 'flash.o' failed make[5]: *** [flash.o] Error 126 make[4]: *** [libc] Error 2 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/image' Makefile:112: recipe for target 'debug' failed make[4]: *** [debug] Error 2 ../../gcc.mk:230: recipe for target 'atomic.o' failed ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -make[5]: *** [atomic.o] Error 126 DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -DCONFIG_ARM -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -I../../include/src/smartlink/alink/include/ -I../../include/ble -o airkiss/airkiss_discover.o airkiss/airkiss_discover.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -Makefile:112: recipe for target 'image' failed make[5]: *** Waiting for unfinished jobs.... DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o efpg_efuse.o efpg_efuse.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o cJSON.o cJSON.c make[4]: *** [image] Error 2 ../../gcc.mk:230: recipe for target 'heap/common/sys_heap.o' failed ../../gcc.mk:230: recipe for target 'btsnoop.o' failed ../../gcc.mk:230: recipe for target 'spiffs/spiffs_cache.o' failed make[5]: *** [heap/common/sys_heap.o] Error 126 make[5]: *** [btsnoop.o] Error 126 make[5]: *** [spiffs/spiffs_cache.o] Error 126 ../../../gcc.mk:230: recipe for target 'MQTTClient-C/MQTTClient.o' failed ../../gcc.mk:230: recipe for target 'efpg.o' failed make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/sys' make[5]: *** [efpg.o] Error 126 make[5]: *** [MQTTClient-C/MQTTClient.o] Error 126 make[5]: *** Waiting for unfinished jobs.... ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -make[5]: *** Waiting for unfinished jobs.... DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o bme280/drv_bme280.o bme280/drv_bme280.c make[5]: *** wait: No child processes. Stop. ../../gcc.mk:230: recipe for target 'port.o' failed /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error make[5]: *** [port.o] Error 126 ../../gcc.mk:230: recipe for target 'mbuf/mbuf_0.o' failed make[5]: *** [mbuf/mbuf_0.o] Error 126 make[5]: *** Waiting for unfinished jobs.... make[5]: *** wait: No child processes. Stop. Makefile:112: recipe for target 'sys' failed /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error make[4]: *** [sys] Error 2 ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -I../../../include/net/nopoll -I./src -o src/nopoll_conn.o src/nopoll_conn.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -I../../../include/net/HTTPClient -I../../../include/net/HTTPClient/API -o HTTPMbedTLSWrapper.o HTTPMbedTLSWrapper.c Makefile:112: recipe for target 'pm' failed ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -make[4]: *** [pm] Error 2 ../../../gcc.mk:230: recipe for target 'ad_button/drv_ad_button.o' failed DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -I../../../include/net/shttpd/ -o src/auth.o src/auth.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error Makefile:112: recipe for target 'fs' failed make[5]: *** [ad_button/drv_ad_button.o] Error 126 make[4]: *** [fs] Error 2 make[5]: *** Waiting for unfinished jobs.... /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -DCONFIG_ARM -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -I../../include/src/smartlink/alink/include/ -I../../include/ble -o airkiss/airkiss_main.o airkiss/airkiss_main.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -../../../gcc.mk:230: recipe for target 'codec/ac107.o' failed make[5]: *** [codec/ac107.o] Error 126 DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../..//include -I../../../..//include/libc -I../../../..//include/driver/cmsis -I../../../..//include/net -I../../../..//include/net/lwip-2.1.2 -I../../../..//include/net/mbedtls-"2.16.8" -I../../../..//include/blec -I../../../..//include/ble -I../../../..//../../../../kernel/liteos_m -I../../../..//../../../../kernel/liteos_m/utils -I../../../..//../../../../kernel/liteos_m/kernel/arch/include -I../../../..//.. -o alink_ca.o alink_ca.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../../gcc.mk:230: recipe for target 'bme280/bme280.o' failed make[5]: *** [bme280/bme280.o] Error 126 ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -DCONFIG_ARM -DZTEST_UNITTEST -DVIRTUAL_HCI -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -I../../include/ble -I../../src/ble/tinycrypt/include -I../../src/ble -I../../include/ble/drivers -I../../include/driver/chip -I../../include/ble/sys -I../../src/ble/settings -o host/settings.o host/settings.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../gcc.mk:230: recipe for target 'airkiss/airkiss_ack.o' failed make[5]: *** [airkiss/airkiss_ack.o] Error 126 make[5]: *** Waiting for unfinished jobs.... ../../../gcc.mk:230: recipe for target 'codec/xradio_internal_codec.o' failed make[5]: *** [codec/xradio_internal_codec.o] Error 126 ../../../gcc.mk:230: recipe for target 'files.o' failed make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/driver/chip' make[5]: *** [files.o] Error 126 ../../gcc.mk:230: recipe for target 'at_common.o' failed /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error make[5]: *** [at_common.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/udhcp-0.9.8' make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/atcmd' ../../gcc.mk:230: recipe for target 'mbuf/mbuf_0_mem.o' failed Makefile:112: recipe for target 'net/udhcp-0.9.8' failed make[5]: *** [mbuf/mbuf_0_mem.o] Error 126 make[4]: *** [net/udhcp-0.9.8] Error 2 Makefile:112: recipe for target 'driver/chip' failed make[4]: *** [driver/chip] Error 2 /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error Makefile:112: recipe for target 'atcmd' failed /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error make[4]: *** [atcmd] Error 2 make[5]: *** wait: No child processes. Stop. /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../../gcc.mk:230: recipe for target 'src/nopoll.o' failed make[5]: *** [src/nopoll.o] Error 126 make[5]: *** Waiting for unfinished jobs.... ../../../gcc.mk:230: recipe for target 'MQTTClient-C/Xr_RTOS/MQTTXrRTOS.o' failed /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error Makefile:112: recipe for target 'wlan' failed make[4]: *** [wlan] Error 2 ../../../gcc.mk:230: recipe for target 'src/nopoll_FreeRTOS.o' failed ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -../../gcc.mk:230: recipe for target 'save_log_by_uart.o' failed ../../../gcc.mk:230: recipe for target 'HTTPCUsr_api.o' failed make[5]: *** [save_log_by_uart.o] Error 126 DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../../include -I../../../../include/libc -I../../../../include/driver/cmsis -I../../../../include/net -I../../../../include/net/lwip-2.1.2 -I../../../../include/net/mbedtls-"2.16.8" -I../../../../include/blec -I../../../../include/ble -I../../../../../../../../kernel/liteos_m -I../../../../../../../../kernel/liteos_m/utils -I../../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../../.. -I../../../../include/net/libwebsockets -I../../../../include/net/libwebsockets/config -o alloc.o alloc.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -Wno-address -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTmake[5]: *** [HTTPCUsr_api.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/util' ../../../gcc.mk:230: recipe for target 'examples/web_server_demo.o' failed ../../gcc.mk:230: recipe for target 'airkiss/airkiss_discover.o' failed ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DMBEDTLS_CONFIG_FILE='<config-xr-mini-cliserv.h>' -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o src/api/api_lib.o src/api/api_lib.c make[5]: *** Waiting for unfinished jobs.... make[5]: *** [airkiss/airkiss_discover.o] Error 126 IN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -I../../../include/net/ -I../../../include/net/mbedtls-2.16.8/mbedtls/configs -o mbedtls.o mbedtls.c make[5]: *** [MQTTClient-C/Xr_RTOS/MQTTXrRTOS.o] Error 126 ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../include -I../../include/libc -I../../include/driver/cmsis -I../../include/net -I../../include/net/lwip-2.1.2 -I../../include/net/mbedtls-"2.16.8" -I../../include/blec -I../../include/ble -I../../../../../../kernel/liteos_m -I../../../../../../kernel/liteos_m/utils -I../../../../../../kernel/liteos_m/kernel/arch/include -I../../.. -o json_test.o json_test.c make[5]: *** [src/nopoll_FreeRTOS.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/net/mqtt' make[5]: *** [examples/web_server_demo.o] Error 126 make[5]: *** Waiting for unfinished jobs.... ../../gcc.mk:230: recipe for target 'sdd.o' failed make[5]: *** [sdd.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/sdd' Makefile:112: recipe for target 'util' failed make[4]: *** [util] Error 2 Makefile:112: recipe for target 'net/mqtt' failed make[4]: *** [net/mqtt] Error 2 Makefile:112: recipe for target 'sdd' failed make[4]: *** [sdd] Error 2 /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../gcc.mk:230: recipe for target 'host/hci_ecc.o' failed make[5]: *** [host/hci_ecc.o] Error 126 make[5]: *** Waiting for unfinished jobs.... ../../../..//gcc.mk:230: recipe for target 'alink_auth.o' failed make[5]: *** [alink_auth.o] Error 126 make[5]: *** Waiting for unfinished jobs.... ../../gcc.mk:230: recipe for target 'efpg_efuse.o' failed make[5]: *** [efpg_efuse.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/efpg' Makefile:112: recipe for target 'efpg' failed make[4]: *** [efpg] Error 2 /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../../include -I../../../../include/libc -I../../../../include/driver/cmsis -I../../../../include/net -I../../../../include/net/lwip-2.1.2 -I../../../../include/net/mbedtls-"2.16.8" -I../../../../include/blec -I../../../../include/ble -I../../../../../../../../kernel/liteos_m -I../../../../../../../../kernel/liteos_m/utils -I../../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../../.. -I../../../../include/net/libwebsockets -I../../../../include/net/libwebsockets/config -o context.o context.c /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -Wno-address -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o src/api/api_msg.o src/api/api_msg.c ../../../gcc.mk:230: recipe for target 'HTTPMbedTLSWrapper.o' failed make[5]: *** [HTTPMbedTLSWrapper.o] Error 126 ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DMBEDTLS_CONFIG_FILE='<config-xr-mini-cliserv.h>' -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -I../../../include/net/ -I../../../include/net/mbedtls-2.16.8/mbedtls/configs -o library/aes.o library/aes.c make[5]: *** wait: No child processes. Stop. /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../gcc.mk:230: recipe for target 'cJSON.o' failed Makefile:112: recipe for target 'net/HTTPClient' failed make[4]: *** [net/HTTPClient] Error 2 make[5]: *** [cJSON.o] Error 126 make[5]: *** Waiting for unfinished jobs.... ../../../gcc.mk:230: recipe for target 'src/auth.o' failed make[5]: *** [src/auth.o] Error 126 make[5]: *** wait: No child processes. Stop. /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error Makefile:112: recipe for target 'net/shttpd-1.42' failed make[4]: *** [net/shttpd-1.42] Error 2 ../../gcc.mk:230: recipe for target 'airkiss/airkiss_main.o' failed make[5]: *** [airkiss/airkiss_main.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/smartlink' /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../../..//gcc.mk:230: recipe for target 'alink_ca.o' failed make[5]: *** [alink_ca.o] Error 126 /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error Makefile:112: recipe for target 'smartlink' failed make[5]: *** wait: No child processes. Stop. make[4]: *** [smartlink] Error 2 /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTR="\"0x1\"" -../../../gcc.mk:230: recipe for target 'src/nopoll_conn.o' failed make[5]: *** [src/nopoll_conn.o] Error 126 DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../../include -I../../../../include/libc -I../../../../include/driver/cmsis -I../../../../include/net -I../../../../include/net/lwip-2.1.2 -I../../../../include/net/mbedtls-"2.16.8" -I../../../../include/blec -I../../../../include/ble -I../../../../../../../../kernel/liteos_m -I../../../../../../../../kernel/liteos_m/utils -I../../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../../.. -I../../../../include/net/libwebsockets -I../../../../include/net/libwebsockets/config -o handshake.o handshake.c ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc -mcpu=cortex-m33 -mtune=cortex-m33 -march=armv8-m.main+dsp -mfpu=fpv5-sp-d16 -mfloat-abi=softfp -mcmse -mthumb -c -g -fno-common -fmessage-length=0 -fno-exceptions -ffunction-sections -fdata-sections -fomit-frame-pointer -Wall -Werror -Wno-cpp -Wpointer-arith -Wno-error=unused-function -MMD -MP -Os -DNDEBUG -Wno-error=stringop-truncation -Wno-error=restrict -include xr_config.h -Wno-address -DCONFIG_CHIP_ARCH_VER=3 -DCONFIG_ARCH_APP_CORE -DCONFIG_CPU_CM33F -DPRJ_XIP_SIZE=8M -DPRJ_BOOT_CERT="\"null\"" -DPRJ_IMAGE_BOOT_ATTR="\"0x1\"" -DPRJ_IMAGE_APP_SRAM_OFFS="\"0x00201000\"" -DPRJ_IMAGE_APP_EP="\"0x00201101\"" -DPRJ_IMAGE_BOOT_SRAM_OFFS="\"0x00230000\"" -DPRJ_IMAGE_BOOT_EP="\"0x00230101\"" -DPRJ_IMAGE_TZ_ATTR="\"0x25\"" -DPRJ_IMAGE_TZ_XIP_ATTR="\"0x26\"" -DPRJ_IMAGE_TZ_PSRAM_ATTR="\"0x25\"" -DPRJ_APP_BIN_CERT="\"null\"" -DPRJ_APP_XIP_BIN_CERT="\"null\"" -DPRJ_APP_PSRAM_BIN_CERT="\"null\"" -DPRJ_IMAGE_APP_ATTmake[5]: *** wait: No child processes. Stop. R="\"0x1\"" -DPRJ_IMAGE_APP_XIP_ATTR="\"0x2\"" -DPRJ_IMAGE_APP_PSRAM_ATTR="\"0x1\"" -DCONFIG_RAM_START=0x00201000 -DPRJ_RAM_SIZE=284K -DPRJ_PSRAM_START_OFFS="\"0x01400000\"" -DCONFIG_PSRAM_START=0x01400000 -DPRJ_PSRAM_SIZE=0K -DPRJ_IMAGE_BOOT_BIN="\"boot_"40"M.bin\"" -DPRJ_IMAGE_SYS_SDD_BIN="\"sys_sdd_"40"M.bin\"" -std=gnu99 -I../../../include -I../../../include/libc -I../../../include/driver/cmsis -I../../../include/net -I../../../include/net/lwip-2.1.2 -I../../../include/net/mbedtls-"2.16.8" -I../../../include/blec -I../../../include/ble -I../../../../../../../kernel/liteos_m -I../../../../../../../kernel/liteos_m/utils -I../../../../../../../kernel/liteos_m/kernel/arch/include -I../../../.. -o src/api/err.o src/api/err.c ../../../gcc.mk:230: recipe for target 'bme280/drv_bme280.o' failed Makefile:112: recipe for target 'net/cloud/aliyun' failed make[5]: *** [bme280/drv_bme280.o] Error 126 make[4]: *** [net/cloud/aliyun] Error 2 ../../gcc.mk:230: recipe for target 'host/settings.o' failed make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/driver/component' make[5]: *** [host/settings.o] Error 126 make[5]: *** wait: No child processes. Stop. Makefile:112: recipe for target 'net/nopoll' failed make[4]: *** [net/nopoll] Error 2 /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error Makefile:112: recipe for target 'driver/component' failed ../../../gcc.mk:230: recipe for target 'mbedtls.o' failed make[4]: *** [driver/component] Error 2 make[5]: *** [mbedtls.o] Error 126 /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error make[5]: *** Waiting for unfinished jobs.... Makefile:112: recipe for target 'ble' failed make[4]: *** [ble] Error 2 ../../gcc.mk:230: recipe for target 'json_test.o' failed make[5]: *** [json_test.o] Error 126 make[5]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src/cjson' ../../../../gcc.mk:230: recipe for target 'alloc.o' failed make[5]: *** [alloc.o] Error 126 make[5]: *** Waiting for unfinished jobs.... Makefile:112: recipe for target 'cjson' failed make[4]: *** [cjson] Error 2 ../../../gcc.mk:230: recipe for target 'src/api/api_lib.o' failed make[5]: *** [src/api/api_lib.o] Error 126 make[5]: *** Waiting for unfinished jobs.... /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../../gcc.mk:230: recipe for target 'src/api/api_msg.o' failed make[5]: *** [src/api/api_msg.o] Error 126 ../../../gcc.mk:230: recipe for target 'library/aes.o' failed make[5]: *** [library/aes.o] Error 126 make[5]: *** wait: No child processes. Stop. ../../../../gcc.mk:230: recipe for target 'context.o' failed make[5]: *** [context.o] Error 126 Makefile:112: recipe for target 'net/mbedtls-"2.16.8"' failed make[4]: *** [net/mbedtls-"2.16.8"] Error 2 /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error /bin/sh: /home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-gcc: cannot execute binary file: Exec format error ../../../../gcc.mk:230: recipe for target 'handshake.o' failed make[5]: *** [handshake.o] Error 126 make[5]: *** wait: No child processes. Stop. ../../../gcc.mk:230: recipe for target 'src/api/err.o' failed make[5]: *** [src/api/err.o] Error 126 Makefile:112: recipe for target 'net/libwebsockets/lib' failed make[5]: *** wait: No child processes. Stop. make[4]: *** [net/libwebsockets/lib] Error 2 Makefile:112: recipe for target 'net/lwip-2.1.2' failed make[4]: *** [net/lwip-2.1.2] Error 2 make[4]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src' Makefile:103: recipe for target 'install' failed make[3]: *** [install] Error 2 make[3]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/src' ../../../../project/project.mk:460: recipe for target '__lib' failed make[2]: *** [__lib] Error 2 make[2]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/project/demo/wlan_ble_demo/gcc' ../../../../project/project.mk:463: recipe for target '__lib' failed make[1]: *** [__lib] Error 2 make[1]: Leaving directory '/home/PDC-XRseries/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark/project/demo/wlan_ble_demo/gcc' Makefile:152: recipe for target 'lib' failed make: *** [lib] Error 2
-
回复: 【XR806鸿蒙开发实战1】实操下载XR806鸿蒙代码并编译烧写
- 下载编译工具链
下载页面:https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads
根据自己的编译PC选择对应的编译工具链,我的PC是x86 linux的,所以选择gcc-arm-none-eabi-10-2020-q4-major-x86_64-linux.tar.bz2
2.1
解压出来放到源码的根目录的tool下tar -jxvf gcc-arm-none-eabi-10-2020-q4-major-src.tar.bz2
2.2
改编译工具链路径
改成
~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-majorPDC-XRseries@AwExdroid94:~/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/liteos_m$ git diff . diff --git a/xr806/liteos_m/config.gni b/xr806/liteos_m/config.gni index 85878dc..08718a9 100755 --- a/xr806/liteos_m/config.gni +++ b/xr806/liteos_m/config.gni @@ -34,7 +34,7 @@ board_toolchain = "arm-none-eabi-gcc" board_toolchain_path = "" # Compiler prefix. -board_toolchain_prefix = "~/tools/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-" +board_toolchain_prefix = "~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin/arm-none-eabi-" # Compiler type, "gcc" or "clang". board_toolchain_type = "gcc" @@ -95,4 +95,4 @@ storage_type = "" asmflags = [ "-D__FPU_PRESENT=1U", "-D__FPU_USED=1U"
xr_skylarks里的gcc
PDC-XRseries@AwExdroid94:~/workspace/chenkunyao/xr806_openharmony2/device/xradio/xr806/xr_skylark$ git diff gcc.mk diff --git a/xr806/xr_skylark/gcc.mk b/xr806/xr_skylark/gcc.mk index 0512969..dbc908c 100755 --- a/xr806/xr_skylark/gcc.mk +++ b/xr806/xr_skylark/gcc.mk @@ -5,7 +5,7 @@ # ---------------------------------------------------------------------------- # cross compiler # ---------------------------------------------------------------------------- -CC_DIR := ~/tools/gcc-arm-none-eabi-10-2020-q4-major/bin +CC_DIR := ~/workspace/chenkunyao/xr806_openharmony2/tool/gcc-arm-none-eabi-10-2020-q4-major/bin CC_PREFIX := $(CC_DIR)/arm-none-eabi- AS := $(CC_PREFIX)as
- 下载编译工具链