麻雀加核计划：MQ增加双核内置128M版本，MQ-Pro则增加四核版本
-
敬请期待，或许很好玩。
备注：加核计划不影响现有版本的生产及销售。 -
双核内置128M，是R528/T1133？ 四核又是什么芯片？
-
@xiaowenge MQ在测试T113.
MQ-Pro的四核先卖个关子，本月底能晒 -
-
内存上终于有点变化了。看产品生命周期了。
-
好消息是能赶上本月底的MQ焊接，T113是整包采的，这次先焊接300pcs吧
-
T113跟F133相比价格如何呢？
-
@lghtjpu 价格贵不了几块
-
@mangogeek 哪里能买到
-
T133-S3 xboot裸奔
-
全志T113-S3 编译烧写步骤。
-
这个好，配置够，D1s有点内存小。113主频多高？
-
T113的性能跟F133哪个更好一些啊？
-
@lghtjpu 当然是t113了爽了，翻倍的内存，老当益壮的a7，risc那个核看数据比a7强，实际感觉不到
-
@tripod9 对了大佬，T113 xboot里主频能跑到多少？手册里没找到具体主频
-
@mangogeek 跑的1.008GHZ
-
@mangogeek 总不会是H616吧
-
T113的板子什么时候有的卖啊？
-
@lghtjpu 再过几天MQ-Dual就出来
-
T113芯片哪里有的卖？
-
@wxgd2017 淘宝店，最晚明天上架
-
-
@mangogeek 包括双核麻雀吗？
-
@mangogeek 大佬，双核sdk能提供下吗
-
-
@mangogeek 这个sdk我下载了，用cat链接后成.tar.gz，后面就解压不了，，，求助
-
@mangogeek 麻雀的sdk有10g，t113的sdk只有4g不到，，不一样？
-
@wxgd2017 什么提示？
-
@mangogeek 将压缩文件解压后，是隐藏文件夹“.repo”，repo目录下有：manifests manifest.xml project-objects repo manifests.git project.list projects，无法按照tina编译方法操作
-
@wxgd2017 这个sdk不是tina，是longan，只有uboot，kernel，最小rootfs的开发包，没有其他package，解压之后只有一个repo可能是解压有问题，分卷压缩的锅
-
和 D1S是pin to pin的吗？芯片价格多少？
-
@wxgd2017
cat t113.tar.gza* | tar -xjv
repo sync -l -
@mangogeek 您好，我下载了这个sdk，请问是怎么编译的啊，第一次接触这个，按照D1的编译步骤，source 就不行，lunch不出来任何东西，打上了那个芒果补丁也不行，希望看到能回复下，万分感谢
-
@zxyuser 这个是longan，不是tina的用法，可以看看这个文档
Longan_Linux_Development_Guide.pdf -
@yuzukitsuru 好的，我先看下，有问题在请教各位大佬
-
@zxyuser 我照着这个编译，然后使用./build.sh pack报错，是目前这个sdk还不支持这个T133芯片吗，如果支持的话，能回复个编译成功的步骤吗，谢谢
-
@zxyuser 错误截图为
-
@zxyuser 错误的意思是boot-resource.fex 太大了，找到sys_partition.fex文件把boot-resource改大一点
[partition] name = boot-resource size = 2024 downloadfile = "boot-resource.fex" user_type = 0x8000 -
@yuzukitsuru 我改成4096也不行，这个文件是什么的啊，我是想通过sd卡启动系统的
-
@yuzukitsuru 生成的out目录下
比我设置的还大 -
@zxyuser sys_config.fex里storage_type = 2
./build.sh config 也注意下./build.sh config Welcome to mkscript setup progress All available platform: 0. linux Choice [linux]: All available linux_dev: 0. bsp 1. dragonboard 2. longan 3. tinyos Choice [bsp]: 2 All available kern_ver: 0. linux-5.4 Choice [linux-5.4]: 0 All available ic: 0. t113 Choice [t113]: All available board: 0. evb1 1. evb1_auto 2. evb1_auto_nand 3. evb1_auto_nor Choice [evb1]: All available flash: 0. default 1. nor Choice [default]: All available gnueabi: 0. gnueabi 1. gnueabihf Choice [gnueabi]: -
@yuzukitsuru
这我这咋还是不行，一直报这个错误 -
-
渴望中……，没看到上架
-
@yuzukitsuru
不知道这个有影响吗，改成34000也还是一样报错 -
-
@yuzukitsuru 可以了，感谢大佬，这个文件整个的都修改了下就好了
-
@yuzukitsuru 请问下大佬，编译出来的固件放上去一点反应都没有，是怎么回事啊，编译xboot那个串口可以正确打印信息
-
@zxyuser 我记得默认串口是uart2，可能要改一下
-
@mangogeek Can you put the file to download somewhere else? I cannot access Baidu from France
你能把文件放到别的地方下载吗？我无法从法国访问百度 -
@mangogeek 你能把文件放到别的地方下载吗？我无法从法国访问百度
-
-
@yuzukitsuru 非常感谢！
-
我在 sys_config.fex 中使用了 storage_type = 2，但是我有这个错误（在 DTS 中找不到 can0 和 can1），知道吗？：
Building kernel make[1]: Entering directory '/home/mstempin/T113-SDK/out/kernel/build' GEN Makefile DTC arch/arm/boot/dts/board.dtb Error: /home/mstempin/T113-SDK/kernel/linux-5.4/arch/arm/boot/dts/board.dts:721.1-6 Label or path can0 not found Error: /home/mstempin/T113-SDK/kernel/linux-5.4/arch/arm/boot/dts/board.dts:728.1-6 Label or path can1 not found FATAL ERROR: Syntax error parsing input tree make[2]: *** [scripts/Makefile.lib:285: arch/arm/boot/dts/board.dtb] Error 1 make[1]: *** [/home/mstempin/T113-SDK/kernel/linux-5.4/Makefile:1350: dtbs] Error 2 make[1]: *** Waiting for unfinished jobs.... make[1]: Leaving directory '/home/mstempin/T113-SDK/out/kernel/build' make: *** [Makefile:179: sub-make] Error 2 ERROR: build kernel Failed INFO: mkkernel failed -
MQ-Pro 还没有上市嘛，看了下店铺还没有
-
@mstempin 注释掉试试看
-
I found many errors while trying to compile the T113-SDK. Am I doing something wrong or someone else found these same errors?
我在编译 T113-SDK 时发现了很多错误。我做错了什么还是其他人发现了这些相同的错误？Here are the details below:
以下是详细信息：I am using Ubuntu 20.04 LTS on Windows 10 WSL2.
我在 Windows 10 WSL2 上使用 Ubuntu 20.04 LTS。1. Problem with repo
1. 回购问题mkdir T113-SDK cd T113-SDK cat <path_to_files>/t113.tar.gza* | tar -xjv repo sync -l /home/mstempin/T113-SDK/.repo/repo/main.py:19: DeprecationWarning: the imp module is deprecated in favour of importlib; see the module's documentation for alternative uses import imp Traceback (most recent call last): File "/home/mstempin/T113-SDK/.repo/repo/main.py", line 39, in <module> from color import SetDefaultColoring File "/home/mstempin/T113-SDK/.repo/repo/color.py", line 19, in <module> import pager File "/home/mstempin/T113-SDK/.repo/repo/pager.py", line 22, in <module> import platform_utils File "/home/mstempin/T113-SDK/.repo/repo/platform_utils.py", line 23, in <module> from Queue import Queue ModuleNotFoundError: No module named 'Queue'Solution: Use the built-in repo command instead of system one:
解决方案：使用内置repo命令代替系统一：
./.repo/repo/repo sync -l2. Configuration
2.配置./build.sh config Welcome to mkscript setup progress All available platform: 0. linux Choice [linux]: 0 All available linux_dev: 0. bsp 1. dragonboard 2. longan 3. tinyos Choice [longan]: 2 All available kern_ver: 0. linux-5.4 Choice [linux-5.4]: 0 All available ic: 0. t113 Choice [t113]: 0 All available board: 0. evb1 1. evb1_auto 2. evb1_auto_nand 3. evb1_auto_nor Choice [evb1_auto]: 0 All available flash: 0. default 1. nor Choice [default]: 0 All available gnueabi: 0. gnueabi 1. gnueabihf Choice [gnueabi]: 0 INFO: Prepare toolchain ... toolchain_archivedir=/home/mstempin/T113-SDK/build/toolchain/gcc-linaro-5.3.1-2016.05-x86_64_arm-linux-gnueabi.tar.xz INFO: kernel defconfig: generate /home/mstempin/T113-SDK/out/kernel/build/.config by /home/mstempin/T113-SDK/kernel/linux-5.4/arch/arm/configs/sun8iw20p1smp_defconfig INFO: Prepare toolchain ... toolchain_archivedir=/home/mstempin/T113-SDK/build/toolchain/gcc-linaro-5.3.1-2016.05-x86_64_arm-linux-gnueabi.tar.xz make: Entering directory '/home/mstempin/T113-SDK/kernel/linux-5.4' make[1]: Entering directory '/home/mstempin/T113-SDK/out/kernel/build' GEN Makefile HOSTCC scripts/basic/fixdep HOSTCC scripts/kconfig/conf.o HOSTCC scripts/kconfig/confdata.o HOSTCC scripts/kconfig/expr.o LEX scripts/kconfig/lexer.lex.c YACC scripts/kconfig/parser.tab.[ch] HOSTCC scripts/kconfig/lexer.lex.o HOSTCC scripts/kconfig/parser.tab.o HOSTCC scripts/kconfig/preprocess.o HOSTCC scripts/kconfig/symbol.o HOSTLD scripts/kconfig/conf *** Default configuration is based on 'sun8iw20p1smp_defconfig' # # configuration written to .config # make[1]: Leaving directory '/home/mstempin/T113-SDK/out/kernel/build' make: Leaving directory '/home/mstempin/T113-SDK/kernel/linux-5.4' INFO: skip buildroot3. Problem with DTS
3. DTS 的问题./build.sh ... Building kernel make[1]: Entering directory '/home/mstempin/T113-SDK/out/kernel/build' GEN Makefile DTC arch/arm/boot/dts/board.dtb Error: /home/mstempin/T113-SDK/kernel/linux-5.4/arch/arm/boot/dts/board.dts:721.1-6 Label or path can0 not found Error: /home/mstempin/T113-SDK/kernel/linux-5.4/arch/arm/boot/dts/board.dts:728.1-6 Label or path can1 not found FATAL ERROR: Syntax error parsing input tree make[2]: *** [scripts/Makefile.lib:285: arch/arm/boot/dts/board.dtb] Error 1 make[1]: *** [/home/mstempin/T113-SDK/kernel/linux-5.4/Makefile:1350: dtbs] Error 2 make[1]: *** Waiting for unfinished jobs.... make[1]: Leaving directory '/home/mstempin/T113-SDK/out/kernel/build' make: *** [Makefile:179: sub-make] Error 2 ERROR: build kernel Failed INFO: mkkernel failedSolution: Apply the following patch:
解决方案：应用以下补丁：--- device/config/chips/t113/configs/evb1/linux-5.4/board.dts.orig 2022-03-12 08:51:36.815704077 +0100 +++ device/config/chips/t113/configs/evb1/linux-5.4/board.dts 2022-03-12 08:52:16.915704417 +0100 @@ -238,7 +238,7 @@ pins = "PB0"; function = "gpio_in"; }; - +/* can0_pins_a: can0_pins_a@0 { pins = "PB2", "PB3"; function = "can0"; @@ -262,7 +262,7 @@ pins = "PB4", "PB5"; function = "gpio_in"; }; - +*/ dmic_pins_a: dmic@0 { /* DMIC_PIN: CLK, DATA0, DATA1, DATA2, DATA3*/ pins = "PB12", "PB11", "PB10", "PE14", "PB8"; @@ -717,7 +717,7 @@ pinctrl-1 = <&ir1_pins_b>; status = "disabled"; }; - +/* &can0 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&can0_pins_a>; @@ -731,7 +731,7 @@ pinctrl-1 = <&can1_pins_b>; status = "disabled"; }; - +*/ &gmac0 { pinctrl-0 = <&gmac0_pins_a>; pinctrl-1 = <&gmac0_pins_b>;4. Problem with missing zlib in audioenctest
**
4. audioenctest中缺少zlib的问题**... make[1]: Entering directory '/home/mstempin/T113-SDK/platform/framework/auto/sdk_demo/audioenctest' arm-linux-gnueabi-g++ -g audioenc_test.cpp -o audioenc_test -I../../sdk_lib/cedarx/include/libcedarc/include -I../../sdk_lib/ -L../../sdk_lib/libs -I../../sdk_lib/include -I../../sdk_lib/include/cutils -I../../sdk_lib/include/camera -I../../sdk_lib/include/disp2 -I../../sdk_lib/memory -lMemAdapter -lvdecoder -lsbm -lfbm -laftertreatment -lscaledown -lcrypto -lvenc_common -lvenc_h264 -lvenc_h265 -lvenc_jpeg -lVE -lcdc_base -lvideoengine -lcdx_common -lcdx_base -lsdk_memory -lsdk_disp -lsdk_log -lsdk_camera -L../../sdk_lib/libs -lsdk_compose -lsdk_disp -lsdk_g2d -lsdk_dvr -lsdk_player -lsdk_log -lsdk_camera -lsdk_memory -lsdk_sound -lsdk_storage -lsdk_audenc -lsdk_cfg -lsdk_ctrl -lsdk_misc -L../../sdk_lib -L../../sdk_lib/libs/ -L../../sdk_lib/cedarx/lib/ -D_T113_ -DHAVE_PTHREADS -DHAVE_SYS_UIO_H -DANDROID_SMP=1 -D__ARM_HAVE_DMB -D__ARM_HAVE_LDREX_STREX -DHAVE_POSIX_CLOCKS -DHAVE_PRCTL -DWATERMARK -DCDX_V27 -DSUPPORT_NEW_DRIVER -D_GNU_SOURCE -DCONFIG_CHIP=7 -DCONFIG_TARGET_PRODUCT= -DCONFIG_PRODUCT=2 -DCONFIG_VE_IPC=1 -DROTATE_PIC_HW=0 -DVE_PHY_OFFSET=0x40000000 -DCONFIG_LOG_LEVEL=0 -L../../sdk_lib/cedarx/lib/ -Wl,--no-undefined -ladecoder -laencoder -lcdx_base -lcdx_common -lcdx_muxer -lcdx_parser -lcdx_playback -lcdx_stream -lMemAdapter -lcdc_base -lsubdecoder -lvdecoder -lvencoder -lVE -lvideoengine -lxmetadataretriever -lxplayer -lasound -lvenc_base -lvenc_codec -lcdx_ion /home/mstempin/T113-SDK/out/gcc-linaro-5.3.1-2016.05-x86_64_arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/5.3.1/../../../../arm-linux-gnueabi/bin/ld: warning: libz.so.1, needed by ../../sdk_lib/cedarx/lib//libcdx_common.so, not found (try using -rpath or -rpath-link) ../../sdk_lib/cedarx/lib//libcdx_parser.so: undefined reference to `uncompress' ../../sdk_lib/cedarx/lib//libcdx_stream.so: undefined reference to `inflate' ../../sdk_lib/cedarx/lib//libcdx_stream.so: undefined reference to `inflateInit2_' ../../sdk_lib/cedarx/lib//libcdx_stream.so: undefined reference to `zlibCompileFlags@ZLIB_1.2.0.2' ../../sdk_lib/cedarx/lib//libcdx_stream.so: undefined reference to `inflateEnd' collect2: error: ld returned 1 exit status make[1]: *** [Makefile:39: audioenc_test] Error 1 make[1]: Leaving directory '/home/mstempin/T113-SDK/platform/framework/auto/sdk_demo/audioenctest' compile audioenctest failSolution: Apply the following patch:
解决方案：应用以下补丁：
--- platform/framework/auto/sdk_demo/audioenctest/Makefile.orig 2022-03-12 08:57:52.315707261 +0100 +++ platform/framework/auto/sdk_demo/audioenctest/Makefile 2022-03-12 09:04:10.025710462 +0100 @@ -29,7 +29,7 @@ LIBS += -lMemAdapter -lvdecoder -lsbm -lfbm -laftertreatment -lscaledown -lcrypto -lvenc_common -lvenc_h264 -lvenc_h265 -lvenc_jpeg LIBS += -lVE -lcdc_base -lvideoengine -lcdx_common -lcdx_base -lsdk_memory -lsdk_disp -lsdk_log -lsdk_camera LIBS += -L$(SDK_PATH)/libs -lsdk_compose -lsdk_disp -lsdk_g2d -lsdk_dvr -lsdk_player \ - -lsdk_log -lsdk_camera -lsdk_memory -lsdk_sound -lsdk_storage -lsdk_audenc -lsdk_cfg -lsdk_ctrl -lsdk_misc + -lsdk_log -lsdk_camera -lsdk_memory -lsdk_sound -lsdk_storage -lsdk_audenc -lsdk_cfg -lsdk_ctrl -lsdk_misc -lz #LIBS += $(LICHEE_BR_OUT)/host/aarch64-buildroot-linux-gnu/sysroot/usr/lib/libmali.so5. Problem with wrong compiler path in usbcam_test
5. usbcam_test 编译路径错误的问题... make[1]: Entering directory '/home/mstempin/T113-SDK/platform/framework/auto/sdk_demo/usbcam_test' /home/mstempin/T113-SDK/platform/framework/auto/sdk_demo/usbcam_test/../../../../../out/t113/evb1_auto/longan/buildroot/host/opt/ext-toolchain//bin/arm-linux-gnueabi-gcc -I /home/mstempin/T113-SDK/kernel/linux-5.4/arch/arm64/include/ -static csi_test_mplane.c -o usbcam_test make[1]: /home/mstempin/T113-SDK/platform/framework/auto/sdk_demo/usbcam_test/../../../../../out/t113/evb1_auto/longan/buildroot/host/opt/ext-toolchain//bin/arm-linux-gnueabi-gcc: Command not found make[1]: *** [Makefile:19: usbcam_test] Error 127 make[1]: Leaving directory '/home/mstempin/T113-SDK/platform/framework/auto/sdk_demo/usbcam_test' compile usbcam_test failSolution: Apply the following patch:
解决方案：应用以下补丁：
--- platform/framework/auto/sdk_demo/usbcam_test/Makefile.orig 2022-03-11 08:21:33.746203952 +0100 +++ platform/framework/auto/sdk_demo/usbcam_test/Makefile 2022-03-12 09:15:46.085716363 +0100 @@ -1,11 +1,9 @@ TARGET := usbcam_test PWD=$(shell pwd) -LICHEE_DIR=$(PWD)/../../../../.. -LICHEE_TOOL_DIR=$(LICHEE_DIR)/out/t113/evb1_auto/longan/buildroot/host/opt/ext-toolchain/ -LICHEE_OUT_HOSTDIR=$(LICHEE_DIR)/out/t113/evb1_auto/longan/buildroot/host/usr/ -CC = $(LICHEE_TOOL_DIR)/bin/arm-linux-gnueabi-gcc -CPP = $(LICHEE_TOOL_DIR)/bin/arm-linux-gnueabi-g++ +include ../makefile_cfg +CC = ${LICHEE_CROSS_COMPILER}-gcc -g $(V) +CPP = ${LICHEE_CROSS_COMPILER}-g++ -g $(V) ARCH_DIR=$(LICHEE_KERN_DIR)/arch/arm64/include/ CFLAGS := -I $(ARCH_DIR)6. Problem with -no-pie flag in sdktest
6. sdktest 中 -no-pie 标志的问题... make[1]: Entering directory '/home/mstempin/T113-SDK/platform/framework/auto/sdk_demo/sdktest' arm-linux-gnueabi-g++ -g -c sdktest.cpp -o sdktest.o -g -no-pie -I./ -I../../sdk_lib/include -I../../sdk_lib/include/disp2 -I../../sdk_lib/include/utils -I../../sdk_lib/include/cutils/ -I../../sdk_lib/include/media -I../../sdk_lib/include/camera -I../../sdk_lib/sdk_camera/moudle -I../../sdk_lib/sdk_camera -I../../sdk_lib/include/storage/ -I../../sdk_lib/include/sound/ -I../../sdk_lib/include/memory/ -I../../sdk_lib/sdk_misc/ -I../../sdk_lib/include/audioenc/ -D_GNU_SOURCE -DCONFIG_CHIP=7 -DCONFIG_TARGET_PRODUCT= -DCONFIG_PRODUCT=2 -DCONFIG_VE_IPC=1 -DROTATE_PIC_HW=0 -DVE_PHY_OFFSET=0x40000000 -DCONFIG_LOG_LEVEL=0 -D_T113_ -DUSE_LOGCAT -DHAVE_PTHREADS -DHAVE_SYS_UIO_H -DANDROID_SMP=1 -D__ARM_HAVE_DMB -D__ARM_HAVE_LDREX_STREX -DHAVE_POSIX_CLOCKS -DHAVE_PRCTL -DWATERMARK -DCDX_V27 -DSUPPORT_NEW_DRIVER arm-linux-gnueabi-g++: error: unrecognized command line option '-no-pie' make[1]: *** [Makefile:57: sdktest] Error 1 make[1]: Leaving directory '/home/mstempin/T113-SDK/platform/framework/auto/sdk_demo/sdktest' compile sdktest failSolution: Remove the -no-pie flag wwith the following patch:
解决方案：使用以下补丁删除 -no-pie 标志：
--- platform/framework/auto/sdk_demo/sdktest/Makefile.orig 2022-03-11 08:21:33.746203952 +0100 +++ platform/framework/auto/sdk_demo/sdktest/Makefile 2022-03-12 09:20:10.865718607 +0100 @@ -54,7 +54,7 @@ all: $(Target) $(Target): $(Target).cpp - $(CPP) -c $(Target).cpp -o $(Target).o -g -no-pie $(INC) $(CEDAR_MACORS) $(DEFINES) + $(CPP) -c $(Target).cpp -o $(Target).o -g $(INC) $(CEDAR_MACORS) $(DEFINES) $(CPP) -o $(Target) $(Target).o $(LIBS) $(CEDAR_LINK_NEW) @cp -f $(Target) $(INSTATLL_PATH) @echo "generate $(Target) success!!!"7. Problem with missign c++11 flag in encoderTest
**
7、encoderTest中的misssign c++11标志问题**... make[1]: Entering directory '/home/mstempin/T113-SDK/platform/framework/auto/sdk_demo/encoderTest' arm-linux-gnueabi-g++ -g encoderTest.cpp -o encoderTest -lMemAdapter -lvencoder -lVE -lcdc_base -lvenc_jpeg -lvenc_common -lvenc_h264 -lvenc_h265 -lvenc_base -lsdk_encoder -lsdk_memory -L../../sdk_lib/libs/ -L../../sdk_lib/cedarx/lib -lpthread -I../../sdk_lib/cedarx/include/libcedarc/include -I../../sdk_lib/include -g In file included from /home/mstempin/T113-SDK/out/gcc-linaro-5.3.1-2016.05-x86_64_arm-linux-gnueabi/arm-linux-gnueabi/include/c++/5.3.1/atomic:38:0, from encoderTest.cpp:11: /home/mstempin/T113-SDK/out/gcc-linaro-5.3.1-2016.05-x86_64_arm-linux-gnueabi/arm-linux-gnueabi/include/c++/5.3.1/bits/c++0x_warning.h:32:2: error: #error This file requires compiler and library support for the ISO C++ 2011 standard. This support must be enabled with the -std=c++11 or -std=gnu++11 compiler options. #error This file requires compiler and library support \ ^ encoderTest.cpp:92:1: error: 'atomic' does not name a type atomic<int> mJpgIndex; ^ encoderTest.cpp: In member function 'virtual int MyEncoderCallback::encoderDataReady(awvideoencoder::AVPacket*)': encoderTest.cpp:326:71: error: 'mJpgIndex' was not declared in this scope sprintf(outPutfile, "%s_sgl_%d.%s", testParam.outputFile, mJpgIndex++, "jpg"); ^ encoderTest.cpp:336:18: error: 'nullptr' was not declared in this scope if ((nullptr != packet->pAddrVir1) && (packet->dataLen1 > 0)) ^ encoderTest.cpp:346:18: error: 'nullptr' was not declared in this scope if ((nullptr != packet->pAddrVir1) && (packet->dataLen1 > 0)) ^ make[1]: *** [Makefile:17: encoderTest] Error 1 make[1]: Leaving directory '/home/mstempin/T113-SDK/platform/framework/auto/sdk_demo/encoderTest' compile encoderTest failSolution: Apply the following patch:
解决方案：应用以下补丁：
--- platform/framework/auto/sdk_demo/encoderTest/Makefile.orig 2022-03-11 08:21:33.676203952 +0100 +++ platform/framework/auto/sdk_demo/encoderTest/Makefile 2022-03-12 09:30:33.745723887 +0100 @@ -6,6 +6,7 @@ CXXFLAGS = -I$(SDK_PATH)/cedarx/include/libcedarc/include CXXFLAGS += -I$(SDK_PATH)/include +CXXFLAGS += -std=c++11 LDFLAGS = -L$(SDK_PATH)/libs/ -L$(SDK_PATH)/cedarx/lib LIBS = -lMemAdapter -lvencoder -lVE -lcdc_base -lvenc_jpeg -lvenc_common -lvenc_h264 -lvenc_h265 -lvenc_base8. Missing kernel symbols for module xr329
**
8. 模块 xr329 缺少内核符号**... =================build extern xr829======================== Makefile:19: CROSS_COMPILE: arm-linux-gnueabi- make -C /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/../../../../../out/kernel/build M=/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829 modules ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make[1]: Entering directory '/home/mstempin/T113-SDK/out/kernel/build' /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/Makefile:19: CROSS_COMPILE: arm-linux-gnueabi- CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/main.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/status.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/sta_info.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/wep.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/wpa.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/wapi.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/scan.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/offchannel.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/ht.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/agg-tx.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/agg-rx.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/ibss.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/mlme.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/work.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/iface.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/rate.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/michael.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/tkip.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/aes_ccm.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/aes_cmac.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/cfg.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/rx.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/spectmgmt.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/tx.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/key.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/util.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/wme.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/event.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/average.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/chan.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/pm.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/rc80211_minstrel.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/umac/rc80211_minstrel_ht.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/wlan/fwio.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/wlan/txrx.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/wlan/vendor.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/wlan/main.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/wlan/queue.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/wlan/hwio.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/wlan/bh.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/wlan/wsm.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/wlan/sta.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/wlan/ap.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/wlan/scan.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/wlan/platform.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/wlan/pm.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/wlan/sdio.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/wlan/debug.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/wlan/etf.o CC [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/wlan/wlan_init.o LD [M] /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.o /home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/Makefile:19: CROSS_COMPILE: arm-linux-gnueabi- Building modules, stage 2. MODPOST 1 modules ERROR: "cfg80211_rx_unprot_mlme_mgmt" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_auth_timeout" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_cqm_rssi_notify" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "wiphy_free" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_unlink_bss" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "ieee80211_bss_get_elem" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "bridge_tunnel_header" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "sdio_enable_func" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "sdio_claim_irq" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "ieee80211_hdrlen" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "ieee80211_channel_to_freq_khz" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "sunxi_wlan_get_bus_index" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_rx_mgmt" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "ieee80211_radiotap_iterator_next" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_unregister_wdev" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_mgmt_tx_status" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "rfc1042_header" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_vendor_cmd_reply" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "ieee80211_freq_khz_to_channel" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_get_bss" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "ieee80211_data_to_8023_exthdr" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "ieee80211_radiotap_iterator_init" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "wiphy_unregister" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_del_sta_sinfo" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "arc4_crypt" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_cqm_pktloss_notify" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_michael_mic_failure" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_ibss_joined" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_assoc_timeout" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "sunxi_wlan_set_power" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "__cfg80211_send_event_skb" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_find_elem_match" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "sdio_unregister_driver" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "sdio_set_host_pm_flags" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "ieee80211_get_channel_khz" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_gtk_rekey_notify" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "sunxi_wlan_get_oob_irq" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_tx_mlme_mgmt" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_put_bss" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "__cfg80211_alloc_event_skb" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "__cfg80211_alloc_reply_skb" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "wiphy_register" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_rx_mlme_mgmt" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "sdio_release_irq" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_classify8021d" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_ready_on_channel" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "wiphy_new_nm" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "sdio_align_size" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_new_sta" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "sdio_memcpy_toio" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "sunxi_mmc_rescan_card" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "ieee80211_amsdu_to_8023s" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_remain_on_channel_expired" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "sdio_register_driver" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "sdio_memcpy_fromio" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_sched_scan_stopped" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "sdio_claim_host" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_scan_done" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "get_custom_mac_address" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "arc4_setkey" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "sdio_set_block_size" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_rx_assoc_resp" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "sdio_disable_func" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "sdio_release_host" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_sched_scan_results" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! ERROR: "cfg80211_inform_bss_frame_data" [/home/mstempin/T113-SDK/platform/framework/auto/kernel/xr829/xr829.ko] undefined! make[3]: *** [/home/mstempin/T113-SDK/kernel/linux-5.4/scripts/Makefile.modpost:114: __modpost] Error 1 make[2]: *** [/home/mstempin/T113-SDK/kernel/linux-5.4/Makefile:1723: modules] Error 2 make[1]: *** [/home/mstempin/T113-SDK/kernel/linux-5.4/Makefile:179: sub-make] Error 2 make[1]: Leaving directory '/home/mstempin/T113-SDK/out/kernel/build'Here, it looks like the kernel is not configured with either 802.11 or SDIO...
在这里，内核似乎没有配置 802.11 或 SDIO...
Giving up for the moment
暂时放弃 -
当板在 Aliexpress 上可用时，请提供链接！
-
@mstempin 下周上链接
-
@mstempin 这个你需要在内核的配置里面加上--- a/kernel/linux-5.4/arch/arm/configs/sun8iw20p1smp_auto_nand_defconfig
+++ b/kernel/linux-5.4/arch/arm/configs/sun8iw20p1smp_auto_nand_defconfig
@@ -64,10 +64,13 @@ CONFIG_DEVTMPFS=y
CONFIG_SUNXI_MBUS=y
CONFIG_MTD=y
CONFIG_AW_MTD_SPINAND=y
+CONFIG_SUNXI_RFKILL=y
+CONFIG_SUNXI_ADDR_MGT=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
CONFIG_SUNXI_GMAC=y
+CONFIG_XR829_WLAN=m
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_SENSORINIT=y
CONFIG_KEYBOARD_SUNXI=y
此三项即可 -
To solve problem #8, I needed to apply the following patch:
为了解决问题 #8，我需要应用以下补丁：diff --git a/arch/arm/configs/sun8iw20p1smp_defconfig b/arch/arm/configs/sun8iw20p1smp_defconfig index 94d4800b8..52c1767f8 100644 --- a/arch/arm/configs/sun8iw20p1smp_defconfig +++ b/arch/arm/configs/sun8iw20p1smp_defconfig @@ -66,16 +66,20 @@ CONFIG_INET_UDP_DIAG=y CONFIG_IPV6_TUNNEL=y CONFIG_NETLINK_DIAG=y CONFIG_CAN=y +CONFIG_CFG80211=m CONFIG_UEVENT_HELPER=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_SUNXI_MBUS=y CONFIG_MTD=y CONFIG_AW_MTD_SPINAND=y +CONFIG_SUNXI_RFKILL=y +CONFIG_SUNXI_ADDR_MGT=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y CONFIG_SUNXI_GMAC=y +CONFIG_XR829_WLAN=m CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_SENSORINIT is not set CONFIG_KEYBOARD_SUNXI=y @@ -163,6 +167,8 @@ CONFIG_USB_SUNXI_USB_MANAGER=y CONFIG_USB_SUNXI_USB_DEBUG=y CONFIG_USB_SUNXI_USB_ADB=y CONFIG_USB_ROLE_SWITCH=y +CONFIG_MMC=y +CONFIG_MMC_SUNXI=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_SUNXI=y CONFIG_DMADEVICES=y @@ -201,6 +207,7 @@ CONFIG_TMPFS_POSIX_ACL=y CONFIG_UBIFS_FS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y +CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_USER_API_HASH=y CONFIG_CRYPTO_USER_API_SKCIPHER=y CONFIG_CRYPTO_USER_API_RNG=y9. Missing sys_partition.fex for longan on evb1
9。 evb1 上的龙眼缺少 sys_partition.fexPARTITION_FEX=/home/mstempin/T113-SDK/device/config/chips/t113/configs/evb1/longan/sys_partition.fex awk: fatal: cannot open file `/home/mstempin/T113-SDK/device/config/chips/t113/configs/evb1/longan/sys_partition.fex' for reading (No such file or directory) ROOTFS_FEX_LINE= awk: fatal: cannot open file `/home/mstempin/T113-SDK/device/config/chips/t113/configs/evb1/longan/sys_partition.fex' for reading (No such file or directory) ROOTFS_FEX_STR= can't find rootfs size in sys_partition.fex, use default 2097152 ROOTFS_FEX_SIZE=2097152 EXT4_SIZE=1073741824(1073741824/1024/1024) /home/mstempin/T113-SDK/device/config/chips/t113/configs/evb1/longan/sys_partition.fex rootfs.fex size is 2097152 EXT4_SIZE=2097152*512=1073741824 Creating filesystem with parameters: Size: 1073741824 Block size: 4096 Blocks per group: 32768 Inodes per group: 8192 Inode size: 256 Journal blocks: 4096 Label: Blocks: 262144 Block groups: 8 Reserved blocks: 0 Reserved block group size: 63 Created filesystem with 113/65536 inodes and 10936/262144 blocks /home/mstempin/T113-SDK/build/bin/make_ext4fs -s -l 1073741824 /home/mstempin/T113-SDK/out/t113/evb1/longan/rootfs.ext4 /home/mstempin/T113-SDK/out/t113/evb1/longan/buildroot/target INFO: pack rootfs ok ... INFO: ---------------------------------------- INFO: build lichee OK. INFO: ----------------------------------------Solution: Create the directory device/config/chips/t113/configs/evb1/longan and copy the file device/config/chips/t113/configs/evb1/sys_partition.fex
解决方案：创建目录device/config/chips/t113/configs/evb1/longan并复制文件device/config/chips/t113/configs/evb1/sys_partition.fex -
To summarize, here is the full patch to apply to the SDK in order to compile longan for evb1:
总而言之，这里是应用到 SDK 的完整补丁，以便为 evb1 编译龙眼：for i in $(find . -type d -name .git); do i=$(dirname $i); echo "======================= $i ================="; cd $i; git diff --staged; cd - >/dev/null; done ======================= ./platform/framework/auto ================= diff --git a/sdk_demo/audioenctest/Makefile b/sdk_demo/audioenctest/Makefile index 532484d..0a8c835 100755 --- a/sdk_demo/audioenctest/Makefile +++ b/sdk_demo/audioenctest/Makefile @@ -29,7 +29,7 @@ DEFINES += $(ANDROID_UTILS_DEF) $(SDKLIB_DEF) $(CEDAR_MACORS) LIBS += -lMemAdapter -lvdecoder -lsbm -lfbm -laftertreatment -lscaledown -lcrypto -lvenc_common -lvenc_h264 -lvenc_h265 -lvenc_jpeg LIBS += -lVE -lcdc_base -lvideoengine -lcdx_common -lcdx_base -lsdk_memory -lsdk_disp -lsdk_log -lsdk_camera LIBS += -L$(SDK_PATH)/libs -lsdk_compose -lsdk_disp -lsdk_g2d -lsdk_dvr -lsdk_player \ - -lsdk_log -lsdk_camera -lsdk_memory -lsdk_sound -lsdk_storage -lsdk_audenc -lsdk_cfg -lsdk_ctrl -lsdk_misc + -lsdk_log -lsdk_camera -lsdk_memory -lsdk_sound -lsdk_storage -lsdk_audenc -lsdk_cfg -lsdk_ctrl -lsdk_misc -lz #LIBS += $(LICHEE_BR_OUT)/host/aarch64-buildroot-linux-gnu/sysroot/usr/lib/libmali.so diff --git a/sdk_demo/encoderTest/Makefile b/sdk_demo/encoderTest/Makefile index 6cb1db2..0112dec 100755 --- a/sdk_demo/encoderTest/Makefile +++ b/sdk_demo/encoderTest/Makefile @@ -6,6 +6,7 @@ SDK_PATH = ../../sdk_lib CXXFLAGS = -I$(SDK_PATH)/cedarx/include/libcedarc/include CXXFLAGS += -I$(SDK_PATH)/include +CXXFLAGS += -std=c++11 LDFLAGS = -L$(SDK_PATH)/libs/ -L$(SDK_PATH)/cedarx/lib LIBS = -lMemAdapter -lvencoder -lVE -lcdc_base -lvenc_jpeg -lvenc_common -lvenc_h264 -lvenc_h265 -lvenc_base diff --git a/sdk_demo/sdktest/Makefile b/sdk_demo/sdktest/Makefile index c11ac94..9577f26 100755 --- a/sdk_demo/sdktest/Makefile +++ b/sdk_demo/sdktest/Makefile @@ -54,7 +54,7 @@ INC = -I./ \ all: $(Target) $(Target): $(Target).cpp - $(CPP) -c $(Target).cpp -o $(Target).o -g -no-pie $(INC) $(CEDAR_MACORS) $(DEFINES) + $(CPP) -c $(Target).cpp -o $(Target).o -g $(INC) $(CEDAR_MACORS) $(DEFINES)^M $(CPP) -o $(Target) $(Target).o $(LIBS) $(CEDAR_LINK_NEW) @cp -f $(Target) $(INSTATLL_PATH) @echo "generate $(Target) success!!!" diff --git a/sdk_demo/usbcam_test/Makefile b/sdk_demo/usbcam_test/Makefile index c52d9b4..6a3e428 100755 --- a/sdk_demo/usbcam_test/Makefile +++ b/sdk_demo/usbcam_test/Makefile @@ -1,11 +1,9 @@ TARGET := usbcam_test PWD=$(shell pwd) -LICHEE_DIR=$(PWD)/../../../../.. -LICHEE_TOOL_DIR=$(LICHEE_DIR)/out/t113/evb1_auto/longan/buildroot/host/opt/ext-toolchain/ -LICHEE_OUT_HOSTDIR=$(LICHEE_DIR)/out/t113/evb1_auto/longan/buildroot/host/usr/ -CC = $(LICHEE_TOOL_DIR)/bin/arm-linux-gnueabi-gcc -CPP = $(LICHEE_TOOL_DIR)/bin/arm-linux-gnueabi-g++ +include ../makefile_cfg +CC = ${LICHEE_CROSS_COMPILER}-gcc -g $(V) +CPP = ${LICHEE_CROSS_COMPILER}-g++ -g $(V) ARCH_DIR=$(LICHEE_KERN_DIR)/arch/arm64/include/ CFLAGS := -I $(ARCH_DIR) ======================= ./platform/framework/qt ================= ======================= ./platform/framework/cedarx ================= ======================= ./platform/framework/cairo ================= ======================= ./platform/framework/minigui ================= ======================= ./platform/framework/pixman ================= ======================= ./platform/framework/libcedarc ================= ======================= ./platform/config ================= ======================= ./platform/base ================= ======================= ./platform/apps ================= ======================= ./platform/core/net ================= ======================= ./platform/core/system ================= ======================= ./platform/core/multimedia ================= ======================= ./platform/core/graphics ================= ======================= ./platform/external/libsysutils ================= ======================= ./platform/external/libcutils ================= ======================= ./platform/external/libutils ================= ======================= ./platform/tools/debug ================= ======================= ./brandy/brandy-2.0/spl-pub ================= ======================= ./brandy/brandy-2.0/u-boot-2018 ================= ======================= ./brandy/brandy-2.0/tools ================= ======================= ./device/config/chips/t113 ================= diff --git a/configs/evb1/linux-5.4/board.dts b/configs/evb1/linux-5.4/board.dts index 062f87a..56e82ae 100755 --- a/configs/evb1/linux-5.4/board.dts +++ b/configs/evb1/linux-5.4/board.dts @@ -238,7 +238,7 @@ pins = "PB0"; function = "gpio_in"; }; - +/* can0_pins_a: can0_pins_a@0 { pins = "PB2", "PB3"; function = "can0"; @@ -262,7 +262,7 @@ pins = "PB4", "PB5"; function = "gpio_in"; }; - +*/ dmic_pins_a: dmic@0 { /* DMIC_PIN: CLK, DATA0, DATA1, DATA2, DATA3*/ pins = "PB12", "PB11", "PB10", "PE14", "PB8"; @@ -717,7 +717,7 @@ pinctrl-1 = <&ir1_pins_b>; status = "disabled"; }; - +/* &can0 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&can0_pins_a>; @@ -731,7 +731,7 @@ pinctrl-1 = <&can1_pins_b>; status = "disabled"; }; - +*/ &gmac0 { pinctrl-0 = <&gmac0_pins_a>; pinctrl-1 = <&gmac0_pins_b>; diff --git a/configs/evb1/longan/sys_partition.fex b/configs/evb1/longan/sys_partition.fex new file mode 100755 index 0000000..fa24603 --- /dev/null +++ b/configs/evb1/longan/sys_partition.fex @@ -0,0 +1,85 @@ +;--------------------------------------------------------------------------------------------------- +; 说明： 脚本中的字符串区分大小写，用户可以修改"="后面的数值，但是不要修改前面的字符串 +;--------------------------------------------------------------------------------------------------- + + +;--------------------------------------------------------------------------------------------------- +; 固件下载参数配置 +;--------------------------------------------------------------------------------------------------- +;*************************************************************************************************** +; mbr的大小, 以Kbyte为单位 +;*************************************************************************************************** +[mbr] +size = 16384 + +;*************************************************************************************************** +; 分区配置 +; +; +; partition 定义范例: +; [partition] ; //表示是一个分区 +; name = USERFS2 ; //分区名称 +; size = 16384 ; //分区大小 单位: 扇区.分区表示个数最多2^31 * 512 = 2T +; downloadfile = "123.fex" ; //下载文件的路径和名称，可以使用相对路径，相对是指相对于image.cfg文件所在分区。也可以使用绝对路径 +; keydata = 1 ; //私有数据分区，重新量产数据将不丢失 +; encrypt = 1 ; //采用加密方式烧录，将提供数据加密，但损失烧录速度 +; user_type = ? ; //私有用法 +; verify = 1 ; //要求量产完成后校验是否正确 +; +; 注：1、name唯一, 不允许同名 +; 2、name最大12个字符 +; 3、size = 0, 将创建一个无大小的空分区 +; 4、align to logical block size(504 sectors), leb size = 2*(1 nand phy block size - 1 phy page size) +;*************************************************************************************************** +[partition_start] + +[partition] + name = boot-resource + size = 504 + downloadfile = "boot-resource.fex" + user_type = 0x8000 + + +[partition] + name = env + size = 504 + downloadfile = "env.fex" + user_type = 0x8000 + +[partition] + name = env-redund + size = 504 + downloadfile = "env.fex" + user_type = 0x8000 + +[partition] + name = boot + size = 7680 + downloadfile = "boot.fex" + user_type = 0x8000 + +[partition] + name = rootfs + size = 61440 + downloadfile = "rootfs.fex" + user_type = 0x8000 + +;[partition] +; name = dsp0 +; size = 2048 +; downloadfile = "dsp0.fex" +; user_type = 0x8000 + +;[partition] +; name = recovery +; size = 16128 +; ;downloadfile = "recovery.fex" +; user_type = 0x8000 + +[partition] + name = UDISK + name = rootfs_data + size = 10240 + user_type = 0x8000 + + ======================= ./device/config/common ================= ======================= ./device/config/rootfs_tar ================= ======================= ./.repo/repo ================= ======================= ./.repo/manifests ================= ======================= ./buildroot/buildroot-201902 ================= ======================= ./test/dragonboard ================= ======================= ./build ================= ======================= ./kernel/linux-5.4 ================= diff --git a/arch/arm/configs/sun8iw20p1smp_defconfig b/arch/arm/configs/sun8iw20p1smp_defconfig index 94d4800b8..52c1767f8 100644 --- a/arch/arm/configs/sun8iw20p1smp_defconfig +++ b/arch/arm/configs/sun8iw20p1smp_defconfig @@ -66,16 +66,20 @@ CONFIG_INET_UDP_DIAG=y CONFIG_IPV6_TUNNEL=y CONFIG_NETLINK_DIAG=y CONFIG_CAN=y +CONFIG_CFG80211=m CONFIG_UEVENT_HELPER=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_SUNXI_MBUS=y CONFIG_MTD=y CONFIG_AW_MTD_SPINAND=y +CONFIG_SUNXI_RFKILL=y +CONFIG_SUNXI_ADDR_MGT=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y CONFIG_SUNXI_GMAC=y +CONFIG_XR829_WLAN=m CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_SENSORINIT is not set CONFIG_KEYBOARD_SUNXI=y @@ -163,6 +167,8 @@ CONFIG_USB_SUNXI_USB_MANAGER=y CONFIG_USB_SUNXI_USB_DEBUG=y CONFIG_USB_SUNXI_USB_ADB=y CONFIG_USB_ROLE_SWITCH=y +CONFIG_MMC=y +CONFIG_MMC_SUNXI=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_SUNXI=y CONFIG_DMADEVICES=y @@ -201,6 +207,7 @@ CONFIG_TMPFS_POSIX_ACL=y CONFIG_UBIFS_FS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y +CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_USER_API_HASH=y CONFIG_CRYPTO_USER_API_SKCIPHER=y CONFIG_CRYPTO_USER_API_RNG=y ======================= ./tools ================= -
@mstempin
我遇到了和你的问题#2一样的问题，请问你是怎么解决的?
I met the same problem as your problem #2, could you tell me how do you solve? -
Moved from D1系列-RISC-V by
YuzukiTsuru
Copyright © 2024 深圳全志在线有限公司 粤ICP备2021084185号 粤公网安备44030502007680号