导航

    全志在线开发者论坛
    • 注册
    • 登录
    • 搜索
    • 版块
    • 话题
    • 在线文档
    • 社区主页

    V853我们来了！！！

    V853系列-AI视觉
    9
    9
    2832
    正在加载更多帖子
    • 从旧到新
    • 从新到旧
    • 最多赞同
    回复
    • 在新帖中回复
    登录后回复
    此主题已被删除。只有拥有主题管理权限的用户可以查看。
    • baiwen
      100ask LV 6 最后由 编辑

      感谢全志在线的大力支持，感谢晕哥的芯片支持，也感谢YuzuKi，芒果大佬的指点，我们终于设计好了 V853开发板核心板与底板，接下来将会进行打样生产，作为AI入门 与 多媒体框架学习的配套专用开发板。

      • 下图，左侧是V853核心板是BTB封装，右侧是YuzuKi大佬赏脸打100ask设计的V851s最小板。
      • V851S最小板，我们会将售价做到低至99元单板，接口丰富而且完善，详细的参数可以 @YuzukiTsuru
        2f52f2c6-676d-473d-9440-bea186eed507-image.png
      • 下面这张图是 配套的 项目1底板，我们暂且叫他 全功能底板，这个板子是用来学习Tina-SDK 开发与摄像头显示等，同时，我们正在设计针对于不同场景需要的不同底板，可以共用一款核心板。
        d0515e29-fd82-4150-a23b-a373ac199494-75e485ffd409f93830baa3c4caca0bb.jpg
      D 1 条回复 最后回复 回复 引用 分享 4
      • aldfaaa
        whycan矿工-小叶 LV 7 最后由 编辑

        抢...............沙发!!!!!!!!!!

        1 条回复 最后回复 回复 引用 分享 1
        • D
          dream LV 6 @baiwen 最后由 编辑

          @allwinnertech 支持，期待配套视频出来。

          1 条回复 最后回复 回复 引用 分享 1
          • mangogeek
            mangogeek LV 8 最后由 编辑

            期待inginging

            1 条回复 最后回复 回复 引用 分享 0
            • YuzukiTsuru
              柚木 鉉 LV 9 最后由 编辑

              👍 👍 👍 👍 👍 👍 👍 👍 👍 👍

              1 条回复 最后回复 回复 引用 分享 0
              • xiaowenge
                DOT小文哥 LV 8 最后由 编辑

                👏 👏 👏 👏 👏 👏

                1 条回复 最后回复 回复 引用 分享 0
                • IAMLIUBO
                  IAMLIUBO LV 5 最后由 编辑

                  我代表xxxx 发来贺电😊

                  盼回礼(来块板子吧~)

                  1 条回复 最后回复 回复 引用 分享 0
                  • S
                    soso90 LV 7 最后由 编辑

                    赶紧啃一啃摄像头相关，没有大佬带，完全玩不转~

                    1 条回复 最后回复 回复 引用 分享 0
                    • A
                      awwwwa LV 7 最后由 awwwwa 编辑

                      Tina 4.0:
                      tina_v851se-tinyvision_uart0.zip

                      Tina 4.0 摄像头测试：
                      e8ce3a5d-7cbf-40a3-b16a-1989ce206407-tina_v851se-tinyvision_uart0.zip

                      Tina 5.0:
                      v851se_linux_tinyvision_uart0_SDNand.zip

                      Patch:
                      e4350d20-eda5-4ff5-b708-5901f5469aa9-tinyvision_patch.tar.gz

                      tinyvision_syterboot.zip

                      tinyvision_e907_boot.zip

                      71d8a58c-6fe2-4a93-96ee-b12bb883b2e1-摄像头测试固件.img

                      d0ef81d9-3893-4c2c-8903-711cf397a3bb-tinyvision.tgz

                      CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN8IW21=y
CONFIG_SUNXI_GPIO_V2=y
#CONFIG_AXP_GPIO=y
CONFIG_SYS_CONFIG_NAME="sun8iw21p1"
CONFIG_DEFAULT_DEVICE_TREE="sun8iw21p1-soc-system"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_CONSOLE_MUX=y
CONFIG_SUNXI_NECESSARY_REPLACE_FDT=y
CONFIG_RESERVE_FDT_SIZE=0x20000
CONFIG_PRE_CONSOLE_BUFFER=n
# CONFIG_OF_BOARD=y
CONFIG_OF_SEPARATE=y
CONFIG_SYS_TEXT_BASE=0x42000000
CONFIG_SUNXI_FDT_ADDR=0x41800000
CONFIG_SUNXI_MALLOC_LEN=0x1400000
# Environment
# CONFIG_ENV_IS_IN_SUNXI_FLASH=y
# CONFIG_SYS_MAXARGS=64
# CONFIG_SUNXI_REDUNDAND_ENVIRONMENT=y
# CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
# CONFIG_SUNXI_ENV_PARTITION="env"
CONFIG_SUNXI_ENV_BACKUP=y
# CONFIG_SUNXI_ENV_REDUNDAND_PARTITION="env-redund"
# CONFIG_ENV_SIZE=0x20000

#system
CONFIG_ARM_SMCCC=y
CONFIG_SUNXI_DMA=y
CONFIG_CLK_SUNXI=y
#SPI
CONFIG_SPI=y
CONFIG_SUNXI_SPI=y
CONFIG_SPI_USE_DMA=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_ISSI=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_PUYA=y
CONFIG_SPI_FLASH_FM=y
CONFIG_SPI_FLASH_XT=y
CONFIG_SPI_FLASH_ADESTO=y
CONFIG_SPI_FLASH_XMC=y
CONFIG_SPI_SAMP_DL_EN=y

CONFIG_SF_DEFAULT_SPEED=50000000
# BIT(12) BIT(13) (SPI_RX_DUAL|SPI_RX_QUAD)
CONFIG_SF_DEFAULT_MODE=0x3000
CONFIG_SPINOR_UBOOT_OFFSET=128
CONFIG_SPINOR_LOGICAL_OFFSET=2016
CONFIG_SPINOR_UBOOT_SECURE_OFFSET=128
CONFIG_SPINOR_LOGICAL_SECURE_OFFSET=2200


#axp
CONFIG_SYS_I2C_SUNXI=y
CONFIG_I2C4_ENABLE=y
CONFIG_SYS_SUNXI_I2C4_SLAVE=0x34
CONFIG_SYS_SUNXI_I2C4_SPEED=400000
CONFIG_SUNXI_POWER=y
CONFIG_SUNXI_PMU=y
CONFIG_SUNXI_BMU=y
CONFIG_AXP2101_POWER=y
CONFIG_AXP2101_SUNXI_I2C_SLAVE=0x34


#key
#CONFIG_SUNXI_PHY_KEY=y
#CONFIG_SUNXI_LRADC_KEY=y


#crypto driver
CONFIG_SUNXI_CE_DRIVER=y
CONFIG_SUNXI_CE_23=y

#CONFIG_SF_DEFAULT_SPEED=50000000
# BIT(12) BIT(13) (SPI_RX_DUAL|SPI_RX_QUAD)
#CONFIG_SF_DEFAULT_MODE=0x3000

#
# PWM_SUNXI
#
CONFIG_PWM_SUNXI=y
# CONFIG_PWM_SUNXI_NEW is not set

#CONFIG_SPINOR_UBOOT_OFFSET=128
#CONFIG_SPINOR_LOGICAL_OFFSET=2016

# flash
CONFIG_SUNXI_SDMMC=y
CONFIG_MMC=y
CONFIG_SUNXI_FLASH=y
CONFIG_SUNXI_NAND=y
CONFIG_SUNXI_UBIFS=y
CONFIG_SUNXI_COMM_NAND_V1=y
CONFIG_SUNXI_SPINOR=y

#usb otg config
CONFIG_SUNXI_USB=y
CONFIG_SUNXI_EFEX=y
CONFIG_SUNXI_BURN=y
CONFIG_SUNXI_FASTBOOT=y
#partition
CONFIG_EFI_PARTITION=y

#image
CONFIG_ANDROID_BOOT_IMAGE=y

#sprite
CONFIG_SUNXI_SPRITE=y
CONFIG_SUNXI_SECURE_STORAGE=y
CONFIG_SUNXI_SPRITE_CARTOON=y

#secure feature
CONFIG_SUNXI_SECURE_BOOT=y
CONFIG_SUNXI_IMAGE_VERIFIER=y
CONFIG_SUNXI_KEYBOX=y
CONFIG_SUNXI_DRM_SUPPORT=y
CONFIG_SUNXI_EXTERN_SECURE_MM_LAYOUT=y


CONFIG_SUNXI_HOMLET=y
CONFIG_SUNXI_HDCP_HASH=y
CONFIG_SUNXI_HDCP_IN_SECURESTORAGE=y

#cmd
CONFIG_CMD_SUNXI_TIMER=y
CONFIG_CMD_SUNXI_SPRITE=y
CONFIG_CMD_SUNXI_EFEX=y
CONFIG_CMD_SUNXI_BURN=y
CONFIG_CMD_GPT=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FASTBOOT=y
CONFIG_CMD_SUNXI_DMA=y
CONFIG_CMD_SUNXI_CLK=y
CONFIG_CMD_SUNXI_MEMTEST=y
CONFIG_CMD_PART=y
CONFIG_CMD_SUNXI_AUTO_FEL=n
CONFIG_CMD_SUNXI_BOOTR=y
#arisc
#CONFIG_SUNXI_ARISC_EXIST=y

# CONFIG_SUNXI_INITRD_ROUTINE is not set
#dsp
#CONFIG_XTENSA_DSP=y
#riscv
#CONFIG_RISCV_E907=y

CONFIG_SUNXI_ARM_SOFT_FP=y
CONFIG_USE_PRIVATE_LIBGCC=y
#
# BOOT GUI
#
CONFIG_BOOT_GUI=y
# CONFIG_UPDATE_DISPLAY_MODE is not set
# CONFIG_CONFIG_LCD_CHECK_SKIP_OPEN is not set
# CONFIG_BOOT_GUI_DOUBLE_BUF is not set
# CONFIG_BOOT_GUI_TEST is not set

#
# SUNXI LOGO DISPLAY
#
CONFIG_CMD_SUNXI_BMP=y
# CONFIG_SUNXI_SPINOR_BMP is not set
# CONFIG_ENABLE_ADVERT_PICTURE is not set
# CONFIG_SUNXI_SPINOR_JPEG is not set
# CONFIG_CMD_SUNXI_JPEG is not set
CONFIG_DISP2_SUNXI=y
# CONFIG_HDMI_DISP2_SUNXI is not set
# CONFIG_HDMI2_DISP2_SUNXI is not set
# CONFIG_VDPO_DISP2_SUNXI is not set
# CONFIG_TV_DISP2_SUNXI is not set
# CONFIG_EDP_DISP2_SUNXI is not set
# CONFIG_EINK200_SUNXI is not set

#
# LCD panels select
#
# CONFIG_LCD_SUPPORT_GG1P4062UTSW is not set
# CONFIG_LCD_SUPPORT_DX0960BE40A1 is not set
# CONFIG_LCD_SUPPORT_TFT720X1280 is not set
# CONFIG_LCD_SUPPORT_FD055HD003S is not set
# CONFIG_LCD_SUPPORT_HE0801A068 is not set
# CONFIG_LCD_SUPPORT_ILI9341 is not set
# CONFIG_LCD_SUPPORT_LH219WQ1 is not set
# CONFIG_LCD_SUPPORT_LS029B3SX02 is not set
# CONFIG_LCD_SUPPORT_LT070ME05000 is not set
# CONFIG_LCD_SUPPORT_S6D7AA0X01 is not set
# CONFIG_LCD_SUPPORT_T27P06 is not set
# CONFIG_LCD_SUPPORT_TFT720x1280 is not set
# CONFIG_LCD_SUPPORT_WTQ05027D01 is not set
# CONFIG_LCD_SUPPORT_H245QBN02 is not set
# CONFIG_LCD_SUPPORT_ST7789V is not set
# CONFIG_LCD_SUPPORT_ST7796S is not set
# CONFIG_LCD_SUPPORT_ST7701S is not set
# CONFIG_LCD_SUPPORT_T30P106 is not set
# CONFIG_LCD_SUPPORT_TO20T20000 is not set
# CONFIG_LCD_SUPPORT_FRD450H40014 is not set
# CONFIG_LCD_SUPPORT_S2003T46G is not set
# CONFIG_LCD_SUPPORT_WILLIAMLCD is not set
# CONFIG_LCD_SUPPORT_LQ101R1SX03 is not set
# CONFIG_LCD_SUPPORT_INET_DSI_PANEL is not set
# CONFIG_LCD_SUPPORT_WTL096601G03 is not set
# CONFIG_LCD_SUPPORT_BP101WX1 is not set
# CONFIG_LCD_SUPPORT_M133X56 is not set
# CONFIG_LCD_SUPPORT_K101IM2QA04 is not set
# CONFIG_LCD_SUPPORT_K101IM2BYL02L is not set
# CONFIG_LCD_SUPPORT_FX070 is not set
# CONFIG_LCD_SUPPORT_M101B31 is not set
# CONFIG_LCD_SUPPORT_CC08021801_310_800X1280 is not set
# CONFIG_LCD_SUPPORT_KD101NA5 is not set
# CONFIG_LCD_SUPPORT_KD070D57 is not set
# CONFIG_LCD_SUPPORT_ZS080NI4003E7H3H_A is not set
# CONFIG_LCD_SUPPORT_K080_IM2HYL802R_800X1280 is not set
# CONFIG_LCD_SUPPORT_K101_IM2BYL02_L_800X1280 is not set
# CONFIG_LCD_SUPPORT_JD9366AB_3 is not set
# CONFIG_LCD_SUPPORT_TFT08006 is not set
CONFIG_LCD_SUPPORT_ST7701S_G5=y
CONFIG_LCD_SUPPORT_T050K589=y
CONFIG_LCD_SUPPORT_JD9161Z_MIPI=y
CONFIG_LCD_SUPPORT_ICN6202=y

#
# Display engine feature select
#
# CONFIG_DISP2_SUNXI_SUPPORT_SMBL is not set
# CONFIG_DISP2_SUNXI_SUPPORT_ENAHNCE is not set
# CONFIG_SUNXI_TV_FASTLOGO is not set
# CONFIG_SUNXI_FASTLOGO_JPEG is not set
                      1 条回复 最后回复 回复 引用 分享 0
                      • 1 / 1
                      • First post
                        Last post

                      Copyright © 2024 深圳全志在线有限公司 粤ICP备2021084185号 粤公网安备44030502007680号

                      行为准则 | 用户协议 | 隐私权政策