Navigation

    全志在线开发者论坛

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • 在线文档
    • 社区主页
    1. Home
    2. Categories
    3. MR Series
    Log in to post
    • Newest to Oldest
    • Oldest to Newest
    • Most Posts
    • Most Votes
    • Most Views
    • C

      哪吒开发板D1编译报错Cannot find lib ld-linux-riscv64-lp64.so.1
      Posted at • casojie

      0 Votes
      15 Replies
      5106 Views

      C Replied at

      @yteraa 也有卡10%的

      common1(partition3) need it, here is a weak func total part: 9 mbr 0, 8000, 8000 boot-resource 1, 1f8, 8000 env 2, 1f8, 8000 env-redund 3, 1f8, 8000 boot 4, 3200, 8000 rootfs 5, 100000, 8000 recovery 6, 4d80, 8000 rootfs_data 7, 2800, 8000 UDISK 8, 0, 0 [09.694]erase all part start need erase flash: 18 [09.700][mmc]: erase from: 0, to: 7634943, cnt: 7634944, erase_group: 1024 [09.719][mmc]: sunxi_mmc_do_send_cmd_common: cmd 38 wait rsp busy 0xd ms [09.725]read item0 copy0 [09.728]Item0 (Map) magic is bad [09.731]the secure storage item0 copy0 magic is bad [09.736]Item0 (Map) magic is bad [09.738]the secure storage item0 copy1 magic is bad [09.743]Item0 (Map) magic is bad [09.746]the secure storage map is empty [09.751]erase secure storage: 0 ok SUNXI_EFEX_MBR_TAG mbr size = 0x10000 write primary GPT success write Backup GPT success [09.768]update partition map FEX_CMD_fes_verify_status FEX_CMD_fes_verify last err=0 ******Has init
      15
    • T

      【Tina_哪吒】在虚拟机上按流程make后部分构建失败
      Posted at • The_Qiang

      0 Votes
      5 Replies
      2221 Views

      T Replied at

      @yuzukitsuru 在 【Tina_哪吒】在虚拟机上按流程make后部分构建失败 中说:

      @the_qiang 是的,sudo rm -rf out/ tmp/ 然后 make clean && make distclean

      感谢大佬~
      下回知道避免root了
      不过我make clean && make distclean 的时候报错了
      f56c34be-5dd4-4dd3-a6e2-88fb81f6c479-image.png
      当初忘了复制一遍虚拟机了,现在在下载新的了。😊

      5
    • I

      This topic is deleted!
      Posted at • ivan_wan

      0 Votes
      2 Replies
      67 Views
      2
    • YuzukiTsuru

      Lichee RV,RV Dock 开发虚拟机下载
      Posted at • 柚木 鉉

      0 Votes
      0 Replies
      971 Views

      No one has replied

      0
    • W

      以太网不通
      Posted at • WB15779898961

      0 Votes
      4 Replies
      1537 Views

      W Replied at

      @whycan 通啦,谢谢你

      4
    • Y

      解决 D1-H & D1s 驱动 RGB LCD(HV)时由于DCLK频率过高导致花屏
      Posted at • YterAA

      2 Votes
      1 Replies
      1970 Views

      aldfaaa Replied at

      大佬, 方便发一下修改过的源文件吗?

      1
    • S

      想动手写MIPI驱动,求D1-H上关于MIPI控制器的资料
      Posted at • sanman

      0 Votes
      3 Replies
      2013 Views

      YuzukiTsuru Replied at

      @sanman 可能是copyright相关吧,源码里有定义倒也不是大问题

      3
    • sora1874

      RTL8723的蓝牙
      Posted at • sora1874

      0 Votes
      1 Replies
      1358 Views

      sora1874 Replied at

      应该是硬件问题,硬件版本为sipeed的rv dock,重新拆掉插拔核心板就好了,83f919e5-fe11-4f3e-b43c-9972ca438854-image.png

      1
    • W

      请教一个关于tina打包rootfs的问题
      Posted at • wjp2547532

      0 Votes
      6 Replies
      2658 Views

      W Replied at

      @yteraa 好的,多谢大佬

      6
    • X

      d1的lvds
      Posted at • xiaoxiao

      0 Votes
      1 Replies
      1212 Views

      YuzukiTsuru Replied at

      是的,复用关系是这样的

      1
    • X

      v853和d1
      Posted at • xiaoxiao

      0 Votes
      3 Replies
      1557 Views

      xiaowenge Replied at

      @xiaoxiao 在 v853和d1 中说:

      @yteraa 官方有计划更新d1的后续支持吗

      暂时没有

      3
    • R

      使用全志服务平台下载D1s Tina Linux 2.0代码 - repo sync 卡死
      Posted at • rockenergytech

      0 Votes
      2 Replies
      1655 Views

      R Replied at

      @yteraa

      啊 。。这样啊,那我等等看看,一般要多久哇,几个小时? 谢谢

      2
    • F

      芒果d1h用sd卡烧录后创建文件夹一直Read-only file system
      Posted at • feng_snail_aw

      0 Votes
      5 Replies
      2597 Views

      W Replied at

      @yuzukitsuru 👍 多谢大佬

      5
    • S

      麻雀 d1s,又又开新坑之7701s
      Posted at • soso90

      0 Votes
      2 Replies
      2038 Views

      S Replied at

      调整了极性后。能出图。现在开始进入触摸的坑:
      目前启动后,i2c报错。dts按照荔枝派86盒子的配置配置触摸
      [ 13.835167] input: fts_ts as /devices/platform/soc@3000000/twi2/i2c-2/2-0048/input/input3
      [ 13.875092] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
      [ 13.911070] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x48, dev addr: 0x48)
      [ 13.948346] sunxi_set_cur_vol_work()394 WARN: get power supply failed
      [ 13.955742] fts_ts 2-0048: 2-0048 supply not found, using dummy regulator
      [ 13.995184] fts_ts 2-0048: 2-0048 supply not found, using dummy regulator
      [ 14.002891] debugfs: Directory '2-0048-' with parent 'reg-dummy-regulator-dummy' already present!
      [ 14.237069] sunxi_set_cur_vol_work()394 WARN: get power supply failed
      [ 14.315243] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
      [ 14.355227] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
      [ 14.395316] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
      [ 14.415094] sunxi_set_cur_vol_work()394 WARN: get power supply failed
      [ 14.435258] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
      [ 14.471104] android_work: sent uevent USB_STATE=CONNECTED
      [ 14.477626] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
      [ 14.505999] sunxi_set_cur_vol_work()394 WARN: get power supply failed
      [ 14.565333] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
      [ 14.605320] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
      [ 14.645250] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
      [ 14.685332] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
      [ 14.725351] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
      [ 14.765251] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
      [ 14.805276] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
      [ 14.855092]

      2
    • K

      f133 0.8 sdk代码编译报错
      Posted at • kiwin

      0 Votes
      7 Replies
      2510 Views

      YuzukiTsuru Replied at

      @whycan

      .rodata' can not be used when making a PIE object; recompile with -fPIE

      连接时报错,应该不是缺库

      7
    • M

      请问烧写系统时,使用的是哪个USB Type-C接口?
      Posted at • mycmos

      0 Votes
      2 Replies
      1255 Views

      M Replied at

      @yuzukitsuru 收到,谢谢

      2
    • S

      订单号1602537027102107792的开发工具包
      Posted at • secnal

      0 Votes
      5 Replies
      1124 Views

      xiaowenge Replied at

      @secnal 在 订单号1602537027102107792的开发工具包 中说:

      @xiaowenge 谢谢,就是官方套餐里的,目前还没找到😬

      是指实物的开发工具包吗?数据线串口线?

      5
    • S

      ubuntu21.04编译d1源码出错
      d1编译出错 ubunt21.04编译d1 编译源码出错 • Posted at • spring

      0 Votes
      11 Replies
      3861 Views

      aldfaaa Replied at

      我换了好多几个环境拷贝 整个sdk 都能重现了这个问题。
      尝试make -d发现连cp这样基础的方法都出现找不到LIBC 2.XX等问题,这让我意识到这不完全是与操作系统相关的问题。
      搜索cp发现out/host目录下有着一套独立的用于编译的系统环境。
      然后果断

      cd out mv host ../.. rm -rf ./*

      正在编译中..., 没有再报错了。

      11
    • Y

      有d1s适配电阻触摸屏的教程么?
      Posted at • yelong98

      0 Votes
      1 Replies
      1185 Views

      whycan Replied at

      ts_calibrate
      ts_test
      有没有反应

      1
    • sora1874

      当使用虚拟机的时候,adb能否只连接到windows
      Posted at • sora1874

      0 Votes
      5 Replies
      2582 Views

      YuzukiTsuru Replied at

      换 VirtualBox(不是

      5
    • H

      D1在uboot下的spi nor flash读写操作
      Posted at • haiqianghuang69

      0 Votes
      2 Replies
      1484 Views

      H Replied at

      @yuzukitsuru
      1.大佬是用什么sdk的呀?我用的是韦东山提供的buildroot工程neza-d1-buildroot,
      2.然后感觉那个uboot有点问题,不会遍历dts中第二层级的device,我在源码上参照那个clocks的来遍历第二层,第三层的device,在uboot 输入dm tree可以正常显示device对应的层级关系。只是第三层级的spinor没有绑定成功

      ///drivers/core/root.c 350 /* bind fixed-clock */ 351 node = ofnode_path("/clocks"); 352 /* if no DT "clocks" node, no need to go further */ ~ 353 if (!ofnode_valid(node)){ + 354 pr_debug("debug, not found ofnode_valid node\n"); 355 return ret; + 356 } + 364 + 365 //直接进入到这里执行 + 366 pr_debug("debug, dm_scan_fdt_node\n\n"); 367 ret = dm_scan_fdt_node(gd->dm_root, gd->fdt_blob, node.of_offset, 368 pre_reloc_only); 369 if (ret) ~ 370 pr_debug("dm_scan_fdt_node() failed: %d\n", ret); + 371 + 372 + 373 pr_debug("\n\n"); + 374 node = ofnode_path("/hello_dts_name@1234"); + 375 if (!ofnode_valid(node)){ + 376 pr_debug("find node faile\n"); + 377 return ret; + 378 } + 379 + 380 ret = uclass_get_device_by_name(UCLASS_HELLO_CJ, "hello_dts_name@1234", &getdev); + 381 if (ret){ + 382 pr_debug("debug, can not get device hello\n"); + 383 ret = uclass_get_device_by_driver(UCLASS_HELLO_CJ, DM_GET_DRIVER(hello_drv), &getdev); + 384 if (ret){ + 385 pr_debug("debug, stil can not find device\n"); + 386 } + 387 } + 388 ret = dm_scan_fdt_node(getdev, gd->fdt_blob, node.of_offset,pre_reloc_only); + 389 if (ret){ + 390 pr_debug("dm_scan_fdt node faile\n"); + 391 }

      修改后的串口dm tree打印

      => dm tree Class Probed Driver Name ---------------------------------------- root [ + ] root_drive root_driver hello_cj_c [ + ] hello_drv |-- hello_dts_name@1234 hello_cj_c [ ] hello_drv_ | `-- hello_dts_child@5678 spi_flash [ ] spi_flash_ `-- spi@04026000 =>

      uboot的spi1 dts配置

      //uboot-origin_master/arch/riscv/dts/sun20iw1p1-soc-system.dts 6 /dts-v1/; 11 / { 12 model = "sun20iw1"; 13 compatible = "allwinner,riscv", "arm,sun20iw1p1"; 14 #address-cells = <2>; 15 #size-cells = <2>; + 18 hellohqh: hello_dts_name@1234 { + 19 + 20 #address-cells = <1>; + 21 #size-cells = <0>; + 22 compatible = "hello_dts"; + 23 reg = <0x02000000>; + 24 pinctrl-names = "default", "sleep"; + 25 pinctrl-0 = <&gpiotest_pins>; + 26 + 27 hellohqh1: hello_dts_child@5678 { + 28 compatible = "hello_child_dts"; + 29 reg = <0x31>; + 30 hellohqh2: hello_dts_child_child@99991 { + 31 compatible = "hello_child_child_dts"; + 32 + 33 }; + 34 }; + 35 }; 37 soc: soc@29000000 { 38 #address-cells = <2>; 39 #size-cells = <2>; + 427 spi1: spi@04026000 { + 428 //#address-cells = <1>; + 429 //#size-cells = <0>; + 430 compatible = "allwinner,sun20i-spi"; + 431 device_type = "spi1"; + 432 reg = <0x0 0x04026000 0x0 0x1000>; + 433 //interrupts-extended = <&plic0 31 IRQ_TYPE_LEVEL_HIGH>; + 434 //clocks = <&ccu CLK_PLL_PERIPH0>, <&ccu CLK_SPI0>, <&ccu CLK_BUS_SPI0>; + 435 //clock-names = "pll", "mod", "bus"; + 436 //resets = <&ccu RST_BUS_SPI0>; + 437 clock-frequency = <100000000>; + 438 pinctrl-names = "default", "sleep"; + 439 spi1_cs_number = <1>; + 440 spi1_cs_bitmap = <1>; + 441 spi_slave_mode = <0>; + 442 //dmas = <&dma 22>, <&dma 22>; + 443 //dma-names = "tx", "rx"; + 444 pinctrl-0 = <&spi1_pins_a &spi1_pins_b>; + 445 pinctrl-1 = <&spi1_pins_c>; + 446 status = "okay"; + 447 spi-nor { + 448 compatible = "jedec,spi-nor"; + 449 spi-max-frequency=<0x5F5E100>; + 450 reg = <0x0>; + 451 spi-rx-bus-width=<0x01>; + 452 spi-tx-bus-width=<0x01>; + 453 status="okay"; + 454 }; + 455 }; + 273 spi1_pins_a: spi1@0 { + 274 allwinner,pins = "PD11", "PD12", "PD13","PD14", "PD15"; + 275 allwinner,pname = "spi1_sclk", "spi1_mosi","spi1_miso", "spi1_hold", "spi1_wp"; + 276 allwinner,function = "spi1"; + 277 allwinner,muxsel = <4>; + 278 allwinner,drive = <1>; + 279 allwinner,pull = <0>; + 280 }; + 281 + 282 spi1_pins_b: spi1@1 { + 283 allwinner,pins = "PD10"; + 284 allwinner,pname = "spi1_cs0"; + 285 allwinner,function = "spi1"; + 286 allwinner,muxsel = <4>; + 287 allwinner,drive = <1>; + 288 allwinner,pull = <1>; // only CS should be pulled up + 289 }; + 290 + 291 spi1_pins_c: spi1@2 { + 292 allwinner,pins = "PD10", "PD11", "PD12", "PD13","PD14", "PD15"; + 293 allwinner,function = "gpio_in"; + 294 allwinner,muxsel = <0>; + 295 allwinner,drive = <1>; + 296 allwinner,pull = <0>; + 297 }; 307 };

      3.我看了一下drivers/sunxi_flash/sunxi_flash.c,貌似不是基于DM模型的驱动,这个是怎么调用的呀?大佬是否可以指导指导,还在学习阶段好多东西都不懂

      2
    • whycan

      D1s 目前的一些玩法:跑Ubuntu rootfs,显示图片,播放音频 (转载)
      Posted at • whycan晕哥

      1 Votes
      7 Replies
      4150 Views

      Y Replied at

      @soso90 播放前打开音频通路

      7
    • D

      T113 使用swupdate升级spinand,不成功,大佬求教。
      Posted at • daMing123

      0 Votes
      1 Replies
      929 Views

      No one has replied

      1
    • W

      如何后期更换logo
      Posted at • wyljkl

      0 Votes
      0 Replies
      1062 Views

      No one has replied

      0
    • H

      在uboot下调用spi的sf_dataflash驱动报错
      Posted at • haiqianghuang69

      0 Votes
      4 Replies
      1971 Views

      H Replied at

      @whycan 刚开始贴的log打印,应该是程序的一些空指针的操作导致系统挂了

      4
    • M

      D1 哪吒解码视频文件测试
      视频解码 哪吒 d1 • Posted at • memory

      1 Votes
      5 Replies
      3261 Views

      W Replied at

      请问如何编译decodertest呢?

      make menuconfig *** <*>decodertest

      执行编译
      后报错

      decodertest.c:13:21: fatal error: cdx_log.h: No such file or directory #include <cdx_log.h> ^ compilation terminated. make[3]: *** [decodertest.o] Error 1
      5
    • M

      【D1-H】关于CLINT的地址映射问题
      Posted at • mxlol233

      0 Votes
      2 Replies
      1338 Views

      N Replied at

      这个得去看c906的手册

      2
    • J

      如何将BOOT0单独写进SD卡或者FLASH
      Posted at • JIAndanai

      0 Votes
      3 Replies
      1818 Views

      YuzukiTsuru Replied at

      xfel

      用 MSVC2017 编译 XFEL 项目

      3
    • chinazhangdj

      全志D1内置看门狗应该如何应用
      Posted at • gouer

      0 Votes
      0 Replies
      1054 Views

      No one has replied

      0
    • S

      Tina Linux 如何卸载显示屏驱动模块
      Posted at • suncw

      0 Votes
      0 Replies
      1188 Views

      No one has replied

      0
    • baiwen

      D1-H/D1s真的要卷起来了!!!
      Posted at • 100ask

      1 Votes
      16 Replies
      5665 Views

      aozima Replied at

      下单了1片

      不过感觉还是紫色好看啊!

      16
    • YuzukiTsuru

      D1-H 使用内置FANOUT REFCLK 24M时钟扫到卡但是无法下载固件
      Posted at • 柚木 鉉

      0 Votes
      12 Replies
      4229 Views

      YuzukiTsuru Replied at

      @apollo5520 测不到信号就不是这个问题了,加载驱动的时候默认会打开dxco。我那个问题是信号噪音过大的问题

      12
    • L

      昨天的行车记录仪屏幕已经点亮,是线序问题,但是测试指令会闪屏。
      Posted at • liuxingkeji

      1 Votes
      2 Replies
      1806 Views

      L Replied at

      @yuzukitsuru 后续这个屏几个测试指令不太对,大佬有啥改进思路吗

      2
    • A

      D1-H 2G DDR3 识别问题请教
      Posted at • Apollo5520

      0 Votes
      5 Replies
      2138 Views

      A Replied at

      @yuzukitsuru 收到,多谢

      5
    • q1215200171

      【Sipeed D1 Dock Pro】YoC RTOS 实战:Lichee D1 Dock 开发板 Button按键
      Posted at • budbool

      0 Votes
      0 Replies
      1172 Views

      No one has replied

      0
    • L

      有成功点亮一款行车记录仪400*1280mipi FPC0.5*40P接口的屏吗
      Posted at • liuxingkeji

      0 Votes
      3 Replies
      1842 Views

      YuzukiTsuru Replied at

      @liuxingkeji 主要是资料不太对

      3
    • tigger

      D1 / D1s 可以用的 5.5元的 1280*400 长条形MIPI屏, 未验证
      Posted at • tigger

      0 Votes
      8 Replies
      3983 Views

      L Replied at

      @yuzukitsuru @tigger 大佬你们点亮了吗?

      8
    • Y

      Sipeed LicheeRV 86 Panel 基于WAFT的家居控制
      Posted at • giao

      0 Votes
      0 Replies
      928 Views

      No one has replied

      0
    • F

      关于引脚中断相应时间
      Posted at • fb321

      0 Votes
      0 Replies
      963 Views

      No one has replied

      0
    • Z

      d1h, docker镜像编译报错
      Posted at • ztcontrol

      0 Votes
      1 Replies
      1430 Views

      Y Replied at

      m menuconfig 关闭 alsa-plugins

      1
    • M

      Sipeed Lichee RV 86 Panel 智能家居 中控开发板 支持Linux WAFT
      Posted at • memory

      0 Votes
      18 Replies
      6378 Views

      Z Replied at

      @memory 在 Sipeed Lichee RV 86 Panel 智能家居 中控开发板 支持Linux WAFT 中说:

      rate_lavcrate.c: In function 'pcm_src_init': rate_lavcrate.c:96:19: warning: implicit declaration of function 'av_resample_init'; did you mean 'av_get_sample_fmt'? [-Wimplicit-function-declaration] rate->context = av_resample_init(info->out.rate, info->in.rate, ^~~~~~~~~~~~~~~~ av_get_sample_fmt rate_lavcrate.c:96:17: warning: assignment to 'struct AVResampleContext *' from 'int' makes pointer from integer without a cast [-Wint-conversion] rate->context = av_resample_init(info->out.rate, info->in.rate, ^ rate_lavcrate.c: In function 'pcm_src_convert_s16': rate_lavcrate.c:186:9: warning: implicit declaration of function 'av_resample'; did you mean 'av_rescale'? [-Wimplicit-function-declaration] ret = av_resample(rate->context, rate->out[i], ^~~~~~~~~~~ av_rescale rate_lavcrate.c:194:2: warning: implicit declaration of function 'av_resample_compensate'; did you mean 'av_get_sample_fmt_name'? [-Wimplicit-function-declaration] av_resample_compensate(rate->context, ^~~~~~~~~~~~~~~~~~~~~~ av_get_sample_fmt_name mv -f .deps/rate_lavcrate.Tpo .deps/rate_lavcrate.Plo /bin/bash ../libtool --tag=CC --mode=link riscv64-unknown-linux-gnu-gcc -Wall -g -I/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/staging_dir/target/usr/include -I/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/staging_dir/target/usr/include/alsa -I/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/staging_dir/target/usr/include -DAVCODEC_HEADER="<libavcodec/avcodec.h>" -Os -pipe -mcmodel=medany -mabi=lp64d -march=rv64gcxthead -g3 -fno-caller-saves -Wno-format-truncation -Wno-unused-result -Wl,-z,now -Wl,-z,relro -fpic -pthread -module -avoid-version -export-dynamic -no-undefined -Wl,--no-undefined -L/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/staging_dir/target/usr/lib -L/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/staging_dir/target/lib -L/opt/D1/home/nihao/sdk/tina-d1-open_new/prebuilt/gcc/linux-x86/riscv/toolchain-thead-glibc/riscv64-glibc-gcc-thead_20200702/usr/lib -L/opt/D1/home/nihao/sdk/tina-d1-open_new/prebuilt/gcc/linux-x86/riscv/toolchain-thead-glibc/riscv64-glibc-gcc-thead_20200702/lib -znow -zrelro -lm -ldl -o libasound_module_rate_lavcrate.la -rpath /usr/lib/alsa-lib rate_lavcrate.lo -L/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/staging_dir/target/usr/lib -lasound -L/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/staging_dir/target/usr/lib -lavcodec -lavutil -lasound OpenWrt-libtool: link: riscv64-unknown-linux-gnu-gcc -shared -fPIC -DPIC .libs/rate_lavcrate.o -L/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/staging_dir/target/usr/lib -L/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/staging_dir/target/lib -L/opt/D1/home/nihao/sdk/tina-d1-open_new/prebuilt/gcc/linux-x86/riscv/toolchain-thead-glibc/riscv64-glibc-gcc-thead_20200702/usr/lib -L/opt/D1/home/nihao/sdk/tina-d1-open_new/prebuilt/gcc/linux-x86/riscv/toolchain-thead-glibc/riscv64-glibc-gcc-thead_20200702/lib -lm -ldl -lavcodec -lavutil -lasound -Os -mcmodel=medany -mabi=lp64d -march=rv64gcxthead -Wl,-z -Wl,now -Wl,-z -Wl,relro -pthread -Wl,--no-undefined -pthread -Wl,-soname -Wl,libasound_module_rate_lavcrate.so -o .libs/libasound_module_rate_lavcrate.so /opt/D1/home/nihao/sdk/tina-d1-open_new/prebuilt/gcc/linux-x86/riscv/toolchain-thead-glibc/riscv64-glibc-gcc-thead_20200702/bin/../lib/gcc/riscv64-unknown-linux-gnu/8.1.0/../../../../riscv64-unknown-linux-gnu/bin/ld: .libs/rate_lavcrate.o: in function `pcm_src_convert_s16': /opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/compile_dir/target/alsa-plugins-1.1.4/rate-lavc/rate_lavcrate.c:194: undefined reference to `av_resample_compensate' /opt/D1/home/nihao/sdk/tina-d1-open_new/prebuilt/gcc/linux-x86/riscv/toolchain-thead-glibc/riscv64-glibc-gcc-thead_20200702/bin/../lib/gcc/riscv64-unknown-linux-gnu/8.1.0/../../../../riscv64-unknown-linux-gnu/bin/ld: /opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/compile_dir/target/alsa-plugins-1.1.4/rate-lavc/rate_lavcrate.c:187: undefined reference to `av_resample' /opt/D1/home/nihao/sdk/tina-d1-open_new/prebuilt/gcc/linux-x86/riscv/toolchain-thead-glibc/riscv64-glibc-gcc-thead_20200702/bin/../lib/gcc/riscv64-unknown-linux-gnu/8.1.0/../../../../riscv64-unknown-linux-gnu/bin/ld: .libs/rate_lavcrate.o: in function `pcm_src_free': /opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/compile_dir/target/alsa-plugins-1.1.4/rate-lavc/rate_lavcrate.c:51: undefined reference to `av_resample_close' /opt/D1/home/nihao/sdk/tina-d1-open_new/prebuilt/gcc/linux-x86/riscv/toolchain-thead-glibc/riscv64-glibc-gcc-thead_20200702/bin/../lib/gcc/riscv64-unknown-linux-gnu/8.1.0/../../../../riscv64-unknown-linux-gnu/bin/ld: .libs/rate_lavcrate.o: in function `pcm_src_init': /opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/compile_dir/target/alsa-plugins-1.1.4/rate-lavc/rate_lavcrate.c:91: undefined reference to `av_resample_init' collect2: error: ld returned 1 exit status Makefile:419: recipe for target 'libasound_module_rate_lavcrate.la' failed make[6]: *** [libasound_module_rate_lavcrate.la] Error 1 make[6]: Leaving directory '/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/compile_dir/target/alsa-plugins-1.1.4/rate-lavc' Makefile:431: recipe for target 'all-recursive' failed make[5]: *** [all-recursive] Error 1 make[5]: Leaving directory '/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/compile_dir/target/alsa-plugins-1.1.4' Makefile:363: recipe for target 'all' failed make[4]: *** [all] Error 2 make[4]: Leaving directory '/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/compile_dir/target/alsa-plugins-1.1.4' Makefile:89: recipe for target '/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/compile_dir/target/alsa-plugins-1.1.4/.built' failed make[3]: *** [/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/compile_dir/target/alsa-plugins-1.1.4/.built] Error 2 make[3]: Leaving directory '/opt/D1/home/nihao/sdk/tina-d1-open_new/package/libs/alsa-plugins' package/Makefile:192: recipe for target 'package/libs/alsa-plugins/compile' failed make[2]: *** [package/libs/alsa-plugins/compile] Error 2 make[2]: Leaving directory '/opt/D1/home/nihao/sdk/tina-d1-open_new' package/Makefile:189: recipe for target '/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/staging_dir/target/stamp/.package_compile' failed make[1]: *** [/opt/D1/home/nihao/sdk/tina-d1-open_new/out/d1-nezha/staging_dir/target/stamp/.package_compile] Error 2 make[1]: Leaving directory '/opt/D1/home/nihao/sdk/tina-d1-open_new' Build failed - please re-run with -j1 to see the real error message /opt/D1/home/nihao/sdk/tina-d1-open_new/build/toplevel.mk:304: recipe for target 'world' failed make: *** [world] Error 1 #### make failed to build some targets (39:16 (mm:ss)) #### ubuntu:/opt/D1/home/nihao/sdk/tina-d1-open_new$

      编译出错了。

      遇到同样问题, make -j1也没有解决

      18
    • X

      给Neza-D1设计个扩展板
      Posted at • xfdr0805

      0 Votes
      3 Replies
      2834 Views

      tigger Replied at

      请问楼主,最后板子做出来了吗?

      3
    • RCfly

      【网络专题1】Tina Wi-Fi模组移植_实践篇
      Posted at • 三颗芋圆

      1 Votes
      1 Replies
      3000 Views

      J Replied at

      @rcfly 能否分享下你的XR829驱动呢,目前我移植的老是发现cmd53接收不到东西

      1
    • q1215200171

      【Sipeed D1 Dock Pro】YoC RTOS 实战:HaaS UI UED桌面显示
      Posted at • budbool

      0 Votes
      0 Replies
      1091 Views

      No one has replied

      0
    • J

      This topic is deleted!
      Posted at • jr_online

      0 Votes
      0 Replies
      4 Views

      No one has replied

      0
    • J

      t113 gt11触摸驱动 打包报错
      Posted at • jr_online

      0 Votes
      4 Replies
      2190 Views

      J Replied at

      @anruliu 在 t113 gt11触摸驱动 打包报错 中说:

      @jr_online 确认下内核有没有配置CONFIG_INPUT_SENSORINIT

      感谢大佬,就是这个CONFIG_INPUT_SENSORINIT没有配置,非常感谢提点!

      4
    • H

      D1s同时启用TVD和DVP接口摄像头,图像显示黑白
      Posted at • Honey130602

      0 Votes
      6 Replies
      2861 Views

      H Replied at

      @tigger 最近才确认清楚,是频偏问题导致

      6
    • q1215200171

      【Sipeed D1 Dock Pro】YoC RTOS 实战:HaaS UI Falcon桌面显示
      Posted at • budbool

      0 Votes
      0 Replies
      1046 Views

      No one has replied

      0
    • eddy_I

      平头哥编译器找不到stdio.h
      Posted at • eddy_I

      0 Votes
      7 Replies
      2660 Views

      eddy_I Replied at

      @yuzukitsuru 在 平头哥编译器找不到stdio.h 中说:

      可以参考下加入package里用tina编译

      好,谢谢

      7
    • J

      T113 tina PC端不能通过adb和目标板进行文件传输
      Posted at • jr_online

      0 Votes
      14 Replies
      4823 Views

      J Replied at

      @whycan 在 T113 tina PC端不能通过adb和目标板进行文件传输 中说:

      @jr_online
      make 命令的时候终端会显示的,复制下来就可以了。

      好滴明白,谢谢大佬[抱拳]😊

      14
    • Y

      请教d1s怎么在线烧录sd nand
      Posted at • yelong98

      0 Votes
      2 Replies
      1451 Views

      Y Replied at

      @yuzukitsuru 你简直是万金油,啥都知道

      2
    • S

      有D1S/F133连接以太网的参考吗
      Posted at • Vogelweide

      0 Votes
      8 Replies
      3493 Views

      YuzukiTsuru Replied at

      参考一下这个,千兆网:
      Yuzuki RV Router RISC-V 旁路由
      https://bbs.aw-ol.com/topic/1583/share/3

      8
    • F

      D1H 烧录debune系统扫描不到SD卡
      Posted at • frank_yuan

      0 Votes
      1 Replies
      919 Views

      YuzukiTsuru Replied at

      @frank_yuan 格式化sd卡

      1
    • F

      D1H上电问题
      Posted at • frank_yuan

      0 Votes
      1 Replies
      901 Views

      Y Replied at

      看报错是内存硬件的问题,当然也有可能是软件烧录不完全

      1
    • F

      D1H 网络
      Posted at • frank_yuan

      0 Votes
      3 Replies
      1124 Views

      F Replied at

      ssh这个怎么操作呢? 文档是哪个?

      3
    • q1215200171

      【Sipeed D1 Dock Pro】YoC RTOS 实战:HaaS helloJS桌面显示
      Posted at • budbool

      0 Votes
      0 Replies
      1003 Views

      No one has replied

      0
    • S

      D1 裸机 DMA
      Posted at • secret

      1 Votes
      1 Replies
      1465 Views

      S Replied at

      @secret 在 D1 裸机 DMA 中说:

      dma_init

      好像那个地址不需要高30位低2位互换

      1
    • baiwen

      真离谱:使用主线Buildroot编译Tina Linux系统,然后使用全志官方PhoenixSuit烧写SPI NAND
      Posted at • 100ask

      1 Votes
      7 Replies
      2881 Views

      J Replied at

      @whycan 大佬,什么时候出个教程呀?

      7
    • F

      D1H 网络测试失败
      Posted at • frank_yuan

      0 Votes
      2 Replies
      1466 Views

      F Replied at

      已经解决,重新烧写了imag文件,就打开了

      2
    • q1215200171

      【Sipeed D1 Dock Pro】YoC RTOS 实战:LCD屏动态显示
      Posted at • budbool

      0 Votes
      0 Replies
      1062 Views

      No one has replied

      0
    • nihui

      芒果派mq-pro快速上手指北
      Posted at • nihui

      1 Votes
      4 Replies
      2441 Views

      nihui Replied at

      @yuzukitsuru 给大佬献上大星星

      4
    • Z

      D1-H 开发板带 math.h 编译 Uboot 报错
      Posted at • dongyuetu

      0 Votes
      5 Replies
      2123 Views

      YuzukiTsuru Replied at

      了解了,现在先自己实现下用到的函数吧,之后我复现一下错误

      5
    • Y

      waft-ui组件的学习和测试
      Posted at • giao

      0 Votes
      0 Replies
      975 Views

      No one has replied

      0
    • q1215200171

      【Sipeed D1 Dock Pro】YoC RTOS 实战:FOTA系统升级
      Posted at • budbool

      0 Votes
      0 Replies
      1051 Views

      No one has replied

      0
    • tigger

      给D1 SDK 添加一个简单的helloworld package
      Posted at • tigger

      0 Votes
      9 Replies
      123015 Views

      whycan Replied at

      @jinxiangwzh

      d1e54ab4-bde1-4290-a99f-d08b9fd64d31-image.png

      CATEGORY:=Utilities 指的是 make menuconfig 的第一级菜单。

      9
    • L

      This topic is deleted!
      Posted at • leesum

      0 Votes
      0 Replies
      3 Views

      No one has replied

      0
    • L

      This topic is deleted!
      Posted at • leesum

      0 Votes
      0 Replies
      3 Views

      No one has replied

      0
    • D

      D1 uart2 PD1&PD2引脚电平有脉冲,求解?
      Posted at • dianjixz

      0 Votes
      5 Replies
      2630 Views

      whycan Replied at

      @suitjune
      检查 .sunxi.dts 这个最终生成的设备树文件。

      5
    • J

      【新手求助】D1s/f133-a 如何优化LVGL8?
      Posted at • jr_online

      0 Votes
      4 Replies
      2385 Views

      J Replied at

      @yuzukitsuru 在 [新手求助]D1s/f133-a 如何优化LVGL8? 中说:

      @jr_online 双缓和g2d可以参考一下论坛的帖子,有代码的。

      好滴,谢谢大佬。

      4
    • X

      D1 tina 打包出来的sdk能用吗
      Posted at • xiaoxiao

      0 Votes
      7 Replies
      2371 Views

      YuzukiTsuru Replied at

      @whycan 哦我知道了,确实没有这个功能,不清楚是不是因为OpenWRT 14也没有这个功能

      7
    • M

      T113,F133视频播放bug
      Posted at • mhcsoft

      0 Votes
      6 Replies
      3158 Views

      YuzukiTsuru Replied at

      @mhcsoft 不是,是直接 tplayerdemo 进入REPL界面设置参数

      参考:D1-H_Tina_Linux_多媒体解码_开发指南.pdf

      6
    • T

      D1S内置电阻触摸TSADC,演示效果
      Posted at • tripod9

      1 Votes
      1 Replies
      1693 Views

      Y Replied at

      @tripod9 能否讲一下电阻屏的驱动适配过程?

      1
    • q1215200171

      技术流直播即将开始!“晕哥”带你玩转“玄铁杯”参赛开发板全志哪吒D1-H开发板
      Posted at • budbool

      2 Votes
      2 Replies
      1393 Views

      whycan Replied at

      感谢大家的支持, 直播回放地址:

      https://www.bilibili.com/video/BV1dA4y1Z7Um

      都是很基础的讲解,大佬略过。

      2
    • tigger

      请问D1可以驱动EDP屏吗?
      edp d1 hdmi • Posted at • tigger

      0 Votes
      6 Replies
      2630 Views

      tigger Replied at

      谢谢大家,看来得用转换芯片了。

      6
    • mangogeek

      真●猛男限定!MQ-Pro粉色
      Posted at • mangogeek

      1 Votes
      11 Replies
      3473 Views

      YuzukiTsuru Replied at

      @mangogeek *跑去楼下捡板子

      11
    • q1215200171

      【硬科技·芯物种】D1-H系列产品助力“玄铁杯”第二届RISC-V应用创新大赛火热进行
      Posted at • budbool

      0 Votes
      0 Replies
      1120 Views

      No one has replied

      0
    • YuzukiTsuru

      D1s + XR829 的 Wi-Fi 部分的 SDIO 接口可以不使用外部上拉吗?用芯片上拉
      Posted at • 柚木 鉉

      0 Votes
      1 Replies
      895 Views

      YuzukiTsuru Replied at

      测试了下,电阻全撬了正常使用

      56645a23-1879-4773-b7ca-527a24c3104e-1.jpg

      9b628fc4-dfb6-4126-826d-977b84657858-2.png

      1
    • S

      咨询一个tina-linux 的uboot编译问题
      Posted at • smiletiger

      0 Votes
      12 Replies
      3718 Views

      S Replied at

      @whycan 谢谢晕哥,我今天测试了下好像是vmware虚拟机的bug,每次copy到win10下面基本上都是上次的老文件,我在linux下面用共享文件夹用cp命令复制到文件夹好像就好了

      12
    • luojia65

      想开发RustSBI,但苦于缺乏资料?RustSBI资料全集仓库来啦!
      Posted at • luojia65

      2 Votes
      5 Replies
      2732 Views

      whycan Replied at

      虽然看不懂,但不妨碍我点赞👍

      5
    • M

      关于Tina LINUX的config文件
      Posted at • mumula

      0 Votes
      5 Replies
      2408 Views

      YuzukiTsuru Replied at

      @mumula 挺怪,我这里没有遇到过这样的问题

      5
    • q1215200171

      LVGL日历控件和显示天气
      Posted at • budbool

      1 Votes
      0 Replies
      1540 Views

      No one has replied

      0
    • M

      tplayerdemo播放视频bug
      Posted at • mumula

      0 Votes
      2 Replies
      2059 Views

      M Replied at

      @whycan 好吧

      2
    • mangogeek

      MQ-R小板,是不是你的菜?【这几天正在修固件】
      mq-r mq-pro buildroot • Posted at • mangogeek

      0 Votes
      0 Replies
      1490 Views

      No one has replied

      0
    • whycan

      全志在线 D1哪吒开发板开机连接wifi热点, 启动 sshd 服务
      Posted at • whycan晕哥

      0 Votes
      3 Replies
      2513 Views

      sora1874 Replied at

      @logpi etc/init.d/S51dropbear脚本里面的exec嘛

      3
    • M

      d1s system init 修改成procd-init tplayerdemo出问题
      Posted at • mhcsoft

      0 Votes
      1 Replies
      993 Views

      YuzukiTsuru Replied at

      @mhcsoft 如果要使用这个INIT,要进行一下其他配置。我一般就busybox了

      1
    • Y

      T113S TP-ADC模块,电阻触摸屏飞点问题
      Posted at • y97788

      0 Votes
      2 Replies
      1316 Views

      whycan Replied at

      @y97788
      tslib里面的插件可以部分解决这些问题:

      nano移植驱动ns2009,触摸测试效果有飞线

      2
    • whycan

      芒果派 MQ Pro 开发板
      mq pro • Posted at • whycan晕哥

      0 Votes
      12 Replies
      3904 Views

      J Replied at

      @yuzukitsuru 在 芒果派 MQ Pro 开发板 中说:

      @jr_online 适用

      芒果派麻雀到手试玩
      https://bbs.aw-ol.com/topic/791/share/59

      大佬,可以帮忙看看吗?触屏的没反应😵

      12
    • T

      既然D1/D1S的LVGL8有G2D和双缓 那么LVGL7也值得拥有
      Posted at • TEVET

      0 Votes
      5 Replies
      3557 Views

      T Replied at

      @yelong98 回大佬
      为了摆脱TINA-BSP的磁盘噩梦能舒服地只编译LVGL8在D1S/D1上面肆意玩耍
      https://bbs.aw-ol.com/topic/1084/share/1
      这里已经搞好放上来了,就改改Makefile 就行了,可以脱离bsp编译

      5
    • M

      请问平头哥官网的qemu能运行tina sdk编译出来的rootfs吗?
      Posted at • memory

      0 Votes
      2 Replies
      1553 Views

      whycan Replied at

      试了一下, 可以用:

      ① sudo apt-get install daxctl libpmem-dev -y

      ② tar xvf xuantie-qemu-x86_64-Ubuntu-18.04-20220402-0353.tar.gz -C /

      ③ qemu-riscv64 -L out/d1s-nezha/compile_dir/target/rootfs/ out/d1s-nezha/compile_dir/target/rootfs/bin/login

      2
    • Z

      请问在哪里能够下载编译好的fedora镜像,文档里的链接已经404
      Posted at • zecheng

      0 Votes
      0 Replies
      404 Views

      No one has replied

      0
    • Kirin

      【免签NDA直接下】D1 Tina SDK v1.0正式释放!深入了解RISC-V的每一个DNA!
      Posted at • 陈塘关李靖

      1 Votes
      16 Replies
      8003 Views

      M Replied at

      @yuzukitsuru 好的
      非常感谢

      另外我想知道全志D1哪吒板
      mcycle的时钟评率是多少?

      16
    • X

      d1手册后面会更新完善吗
      Posted at • xiaoxiao

      0 Votes
      2 Replies
      1178 Views

      X Replied at

      @whycan 啊这,那这样多没意思😞

      2
    • YuzukiTsuru

      【硬核干货】D1-H / D1 与D1s 比较图 ,一眼看出区别
      Posted at • 柚木 鉉

      2 Votes
      5 Replies
      5104 Views

      P Replied at

      @yuzukitsuru 有没有EMMC的参考设计呀

      5
    • BedRock

      全志开发板GPIO名命规范(全系列通用)
      Posted at • BedRock

      0 Votes
      6 Replies
      3891 Views

      BedRock Replied at

      @mzh111 32*GPIO(x-A) + num
      32 * 2 + 1 = 65

      6
    • N

      求助大佬。D1s如何修改默认的Debug串口节点为UART3,也就是PB6 PB7
      Posted at • nezhastu

      0 Votes
      6 Replies
      2736 Views

      N Replied at

      @whycan 已经可以了,主要是 board.dts设备树内的节点没有修改好,所以无法启动,但是又遇到了新的问题, 看着log已经加载到了 rootfs ,但是在 init服务这里出错,不知道是什么原因。
      50f06c82-2c6a-4c35-8e25-698b6ce3acdf-图片.png

      6
    • K

      基于D1开发板的 微信/支付宝 物联网(MQTT)支付平台
      微信支付 支付宝 哪吒 • Posted at • kw___

      2 Votes
      5 Replies
      3344 Views

      tigger Replied at

      有没有哪位大佬玩起来了?

      5
    • Y

      d1s 该怎么修改生成分区文件大小
      Posted at • yuwei

      0 Votes
      5 Replies
      2507 Views

      Y Replied at

      @whycan 谢谢晕哥

      5
    • X

      d1h boot0的介绍文档在哪
      Posted at • xiaoxiao

      0 Votes
      3 Replies
      1895 Views

      luojia65 Replied at

      在此我借个楼强烈要求各个厂家提高boot0的透明度,产权代码没事,不给产权代码就行了,又不需要编译,如果不公开最后人去逆向,那产权代码的事情就全都让人知道了
      不公开boot0对引导程序作者是灭顶之灾,我个人认为只做uboot却没有boot0参考,这个和**开发者区别不大

      3
    • Y

      编译时下载文件404
      Posted at • yuwei

      0 Votes
      1 Replies
      771 Views

      whycan Replied at

      浏览器手动下载,复制到 dl/ 目录。

      1
    • Y

      d1s tina 配置里添加dbus 之后编译出现了报错不知道怎么解决
      Posted at • yuwei

      0 Votes
      2 Replies
      1933 Views

      Y Replied at

      @whycan 在 d1s tina 配置里添加dbus 之后编译出现了报错不知道怎么解决 中说:

      for arm only

      最离谱的是我改回来,编译还会报错。

      2
    • undefined


      Posted at •

      Votes
      Replies
      Views
    • 1
    • 2
    • 11
    • 12
    • 13
    • 14
    • 15
    • 18
    • 19
    • 13 / 19

    Copyright © 2024 深圳全志在线有限公司 粤ICP备2021084185号 粤公网安备44030502007680号

    行为准则 | 用户协议 | 隐私权政策