@aw_fans 搞定就好

@mafei 在 D1s tina 如何开机自启动程序 中说：

the system init finished. By default this file does nothing.

或
target/allwinner/t113-nezha/busybox-init-base-files/etc/init.d/rc.final

我用第三方的烧录工具，在榴莲派开发板的网盘下载的

我已经在 linux-sunxi.org 网站找到了SD卡启动流程！！！
资料查找顺序：

linux-sunxi.org -> Community -> linux-sunxi community page -> Category:Community -> 2.1 Bring up your own hardware -> attempting to identify your hardware -> 3.1 Boards -> H5 Boards -> 根据自己的型号选择 -> Manual build -> Manual build howto ->Set up SD-Card for booting

用ubuntu 16.04 安装好相关库就OK了。能留个连续方式吗。我的c200s tina 音视频方面编译报错，有没有大佬求助一下，还有gt911的驱动

@willxhu 在 快速熟悉平台系统 文档资料汇总~ 中说：

求大佬粘贴点干货硬货资料~

有没有什么交流群

@fg_12933 会不会是硬件层没通

@awwwwa 问一下，1、啥是套片 2、实际上就是这LDO和DCDC默认输出是0.9v，先给芯片指定区域供电，完成启动后芯片在通过i2c发送设置指令给pmic是吗

真麻烦啊 几天能升级LV2

@yixintai its the lpi-3h board it has the normal AIC8800 baked in but there is a second wifi module on host board. Really its a cool looking project but so underdeveloped that while I am looking for a corporate solution it may not fit needs due to ambiguous notes and docs. I just need to flesh out the ui in android and strip out some of the issues. I just do want to spend days creating configs if someone has a quick answer. As for Corprate or Hobbyist the answer is both. working on a corprate solution but also do a fair amount of teaching my kids haw to make cool stuff like robots powered by Ai but this project is for work. and yes I know an A133 type board would be best but the the dev boards for them are so limited and the sellers are not cool with sharing bsp with US devs. and I have allwinnertech account but everything is not user friendly. We have to mail in our NDAs and they make it really complicated for poeple who dont live mainland to develop. (I love them and hate them at same time) .

SOLVED

I changed size from 504 to 11504 in the file,
then it pack the img file,

~/LC/Tina-Linux/device/config/chips/f133/configs/mq_r/sys_partition.fex [partition] name = boot-resource size = 11504 downloadfile = "boot-resource.fex" user_type = 0x8000

@helloa 参考pack脚本，制作对应分区

SOLVED,

I used a device to sniff UART between F133 and slave device,
Its RTS CTS line corrupted, so I removed it and everything ok now,

thanks for your kind help

@li6848 个人玩一下还是公司项目，公司项目可以找代理商要sdk

@clock333mhz 成功了吗，h313移植lakka有没有希望？

@cweib 我也是这样的问题，但是使用下面的DDR读写可以正常读写数据，请问dram_para要怎么配置，我使用的是ddr3/4GB，不胜感谢!
dram_para.png

DragonHD新版软件在哪获取啊

@pxclihai 上一次遇到这个问题 是底部焊盘未良好焊接导致的。

我什么时候能做出这样的板子啊，加油

在编译的时候可以看到确实已经编译出bin文件了，而且也复制到target/usr/bin文件夹里面去了，但是貌似打包的时候没有放进去
a875cd30-ac0d-42c2-9914-7d25a6d0c487-1734936238909.png
023f776e-e8e4-4e9b-aea6-2dc1a2b7053c-1734936270736.png
请教一下大家，这种情况应该检查那些东西。

@gwx123

就dts 可能有問題

如果你都確定其他版本可以正確
表示在那個版本的軟硬件設定正確

那事情就簡單了　就是Android 12 設定不正確

我也不是原廠的工程師
只是說明訊息產生的原因
言盡於此

@awwwwa 日志如下

-------- beginning of main 01-01 08:00:05.964 174 174 W lowmemorykiller: LMKD : whitelist android.signature.cts.api.hiddenapi_blacklist_api_27;android.signature.cts.api.hiddenapi_blacklist_api_28;android.signature.cts.api.hiddenapi_blacklist_current;android.media.cts;android.process.media;com.antutu.ABenchMark;com.antutu.benchmark.full;com.antutu.benchmark.full:unity;com.antutu.ABenchMark:push;com.futuremark.dmandroid.application;com.allwinner.batterytest;cn.xender;com.socialnmobile.dictapps.notepad.color.note;org.videolan.vlc; 01-01 08:00:05.964 174 174 I lowmemorykiller: Using psi monitors for memory pressure detection 01-01 08:00:05.966 174 174 I lowmemorykiller: Process polling is supported --------- beginning of kernel 01-01 08:00:02.196 0 0 I : Booting Linux on physical CPU 0x0000000000 [0x410fd034] 01-01 08:00:02.196 0 0 I : Linux version 5.4.125+ (robin@robin) (Android (7485623, based on r416183b1) clang version 12.0.7 (https://android.googlesource.com/toolchain/llvm-project c935d99d7cf2016289302412d708641d52d2f7ee), LLD 12.0.7 (/buildbot/src/android/llvm-r416183/out/llvm-project/lld c935d99d7cf2016289302412d708641d52d2f7ee)) #3 SMP PREEMPT Tue Dec 10 15:33:55 CST 2024 01-01 08:00:02.196 0 0 I Machine model: sun50iw9 01-01 08:00:02.196 0 0 I earlycon: uart8250 at MMIO32 0x0000000005000000 (options '') 01-01 08:00:02.196 0 0 I printk : bootconsole [uart8250] enabled 01-01 08:00:02.196 0 0 I cma : Reserved 8 MiB at 0x00000000bf800000 01-01 08[ 8.365780][ T248] cutils-trace: Error opening trace file: No such file or directory (2) :00:02.196 0 0 D : On node 0 totalpages: 524288 01-01 08:00:02.196 0 0 D DMA32 zone: 8192 pages used for memmap 01-01 08:00:02.196 0 0 D DMA32 zone: 0 pages reserved 01-01 08:00:02.196 0 0 D DMA32 zone: 524288 pages, LIFO batch:63 01-01 08:00:02.196 0 0 I psci : probing for conduit method from DT. 01-01 08:00:02.196 0 0 I psci : PSCIv1.0 detected in firmware. 01-01 08:00:02.196 0 0 I psci : Using standard PSCI v0.2 function IDs 01-01 08:00:02.196 0 0 I psci : Trusted OS migration not required 01-01 08:00:02.196 0 0 I psci : SMC Calling Convention v1.0 01-01 08:00:02.196 0 0 I percpu : Embedded 22 pages/cpu s49944 r8192 d31976 u90112 01-01 08:00:02.196 0 0 D pcpu-alloc: s49944 r8192 d31976 u90112 alloc=22*4096 01-01 08:00:02.196 0 0 D pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 01-01 08:00:02.196 0 0 I : Detected VIPT I-cache on CPU0 01-01 08:00:02.196 0 0 I CPU features: detected: ARM erratum 845719 01-01 08:00:02.196 0 0 I : Built 1 zonelists, mobility grouping on. Total pages: 516096 01-01 08:00:02.196 0 0 I : Kernel command line: earlycon=uart8250,mmio32,0x05000000 clk_ignore_unused initcall_debug=0 console=ttyAS0,115200 loglevel=4 root=/dev/mmcblk0p4 init=/init cma=8M snum=0c001050010248d1f91 mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 androidboot.force_normal_boot=1 androidboot.slot_suffix=_a androidboot.vbmeta.avb_version=2.0 androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=7872 androidboot.vbmeta.digest=5b1037089489ad2fa0c62cd98e9ae2801bc6e393fd0b59a89d303bac5f3f4f8e androidboot.vbmeta.device_state=locked androidboot.veritymode=enforcing androidboot.mode=normal androidboot.serialno=0c001050010248d1f91 androidboot.hardware=sun50iw9p1 boot_type=2 androidboot.boot_type=2 androidboot.secure_os_exist=1 androidboot.trustchain=false androidboot.drmkey=false gpt=1 uboot_message=2018.07-gb99798b(04/04/2023-13:23:26) mbr_offset=1032192 disp_reserve=3686400,0xbbf21000 bootreason=unknow androidboot.dramfreq=720 androidboot.dramsize=2048 loop.max_part=4 android 01-01 08:00:02.196 0 0 I : Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) 01-01 08:00:02.196 0 0 I : Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) 01-01 08:00:02.196 0 0 I mem auto-init: stack:off, heap alloc:off, heap free:off 01-01 08:00:02.196 0 0 I Memory : 1990540K/2097152K available (14076K kernel code, 1366K rwdata, 5684K rodata, 1024K init, 778K bss, 98420K reserved, 8192K cma-reserved) 01-01 08:00:02.196 0 0 I SLUB : HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 01-01 08:00:02.196 0 0 I rcu : Preemptible hierarchical RCU implementation. 01-01 08:00:02.196 0 0 I : Tasks RCU enabled. 01-01 08:00:02.196 0 0 I rcu : RCU calculated value of scheduler-enlistment delay is 25 jiffies. 01-01 08:00:02.196 0 0 I NR_IRQS : 64, nr_irqs: 64, preallocated irqs: 0 01-01 08:00:02.196 0 0 I kfence : initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) 01-01 08:00:02.196 0 0 I random : get_random_bytes called from start_kernel+0x224/0x434 with crng_init=0 01-01 08:00:02.196 0 0 I arch_timer: cp15 timer(s) running at 24.00MHz (virt). 01-01 08:00:02.196 0 0 I clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns 01-01 08:00:02.196 0 0 I sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns 01-01 08:00:02.197 0 0 I clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns 01-01 08:00:02.197 0 0 I : Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) 01-01 08:00:02.197 0 0 I pid_max : default: 32768 minimum: 301 01-01 08:00:02.197 0 0 I LSM : Security Framework initializing 01-01 08:00:02.197 0 0 I SELinux : Initializing. 01-01 08:00:02.197 0 0 I : Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) 01-01 08:00:02.197 0 0 I : Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) 01-01 08:00:02.198 1 1 I : ASID allocator initialised with 32768 entries 01-01 08:00:02.198 1 1 I rcu : Hierarchical SRCU implementation. 01-01 08:00:02.201 1 1 E BOOTEVENT: 4.206998: ON 01-01 08:00:02.206 1 1 I smp : Bringing up secondary CPUs ... 01-01 08:00:02.206 0 0 I : Detected VIPT I-cache on CPU1 01-01 08:00:02.206 0 0 I CPU1 : Booted secondary processor 0x0000000001 [0x410fd034] 01-01 08:00:02.207 0 0 I : Detected VIPT I-cache on CPU2 01-01 08:00:02.207 0 0 I CPU2 : Booted secondary processor 0x0000000002 [0x410fd034] 01-01 08:00:02.207 0 0 I : Detected VIPT I-cache on CPU3 01-01 08:00:02.207 0 0 I CPU3 : Booted secondary processor 0x0000000003 [0x410fd034] 01-01 08:00:02.207 1 1 I smp : Brought up 1 node, 4 CPUs 01-01 08:00:02.207 1 1 I SMP : Total of 4 processors activated. 01-01 08:00:02.207 1 1 I CPU features: detected: 32-bit EL0 Support 01-01 08:00:02.207 1 1 I CPU features: detected: CRC32 instructions 01-01 08:00:02.207 1 1 I CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching 01-01 08:00:02.207 1 1 I : CPU: All CPU(s) started at EL1 01-01 08:00:02.207 12 12 I alternatives: patching kernel code 01-01 08:00:02.208 1 1 I CPU3 : update max cpu_capacity 1024 01-01 08:00:02.209 1 1 I devtmpfs: initialized 01-01 08:00:02.210 0 0 I [ C1] CPU1: update max cpu_capacity 1024 01-01 08:00:02.217 1 1 I : Registered cp15_barrier emulation handler 01-01 08:00:02.217 1 1 I : Registered setend emulation handler 01-01 08:00:02.217 1 1 I clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns 01-01 08:00:02.217 1 1 I : futex hash table entries: 1024 (order: 4, 65536 bytes, linear) 01-01 08:00:02.217 1 1 I pinctrl core: initialized pinctrl subsystem 01-01 08:00:02.218 1 1 I NET : Registered protocol family 16 01-01 08:00:02.220 1 1 I DMA : preallocated 256 KiB pool for atomic allocations 01-01 08:00:02.220 1 1 I audit : initializing netlink subsys (disabled) 01-01 08:00:00.020 173 173 W auditd : type=2000 audit(0.0:1): state=initialized audit_enabled=0 res=1 01-01 08:00:02.220 1 1 I cpuidle : using governor menu 01-01 08:00:02.220 1 1 I hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. 01-01 08:00:02.243 1 1 I ccu : sunxi ccu init OK 01-01 08:00:02.243 1 1 I r_ccu : sunxi ccu init OK 01-01 08:00:02.243 1 1 D : Sunxi ccu sun50iw9-r init OK 01-01 08:00:02.243 1 1 I sun50iw9-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver 01-01 08:00:02.252 1 1 I cryptd : max_cpu_qlen set to 1000 01-01 08:00:02.263 1 1 I iommu : Default domain type: Translated 01-01 08:00:02.263 1 1 I sunxi iommu: irq = 39 01-01 08:00:02.264 1 1 I : SCSI subsystem initialized 01-01 08:00:02.264 1 1 I usbcore : registered new interface driver usbfs 01-01 08:00:02.264 1 1 I usbcore : registered new interface driver hub 01-01 08:00:02.264 1 1 I usbcore : registered new device driver usb 01-01 08:00:02.264 1 1 I videodev: Linux video capture interface: v2.00 01-01 08:00:02.265 1 1 I : Advanced Linux Sound Architecture Driver Initialized. 01-01 08:00:02.265 1 1 I Bluetooth: Core ver 2.22 01-01 08:00:02.265 1 1 I NET : Registered protocol family 31 01-01 08:00:02.265 1 1 I Bluetooth: HCI device and connection manager initialized 01-01 08:00:02.265 1 1 I Bluetooth: HCI socket layer initialized 01-01 08:00:02.265 1 1 I Bluetooth: L2CAP socket layer initialized 01-01 08:00:02.265 1 1 I Bluetooth: SCO socket layer initialized 01-01 08:00:02.265 1 1 I : pwm module init! 01-01 08:00:02.266 1 1 W sun50iw9-r-pinctrl 7022000.pinctrl: 7022000.pinctrl supply vcc-pl not found, using dummy regulator 01-01 08:00:02.266 1 1 W sunxi-i2c5: sunxi-i2c5 supply twi not found, using dummy regulator 01-01 08:00:02.267 1 1 I axp20x-i2c 5-0036: AXP20x variant AXP1530 found 01-01 08:00:02.269 1 1 I axp1530-dcdc1: supplied by regulator-dummy 01-01 08:00:02.269 1 1 I axp1530-dcdc2: supplied by regulator-dummy 01-01 08:00:02.270 1 1 I axp1530-dcdc3: supplied by regulator-dummy 01-01 08:00:02.271 1 1 I axp1530-aldo1: supplied by regulator-dummy 01-01 08:00:02.271 1 1 I axp1530-dldo1: supplied by regulator-dummy 01-01 08:00:02.272 1 1 I axp20x-i2c 5-0036: AXP20X driver loaded 01-01 08:00:02.272 1 1 I sunxi-i2c5: probe success 01-01 08:00:02.272 1 1 I clocksource: Switched to clocksource arch_sys_counter 01-01 08:00:02.273 1 1 I VFS : Disk quotas dquot_6.6.0 01-01 08:00:02.273 1 1 I VFS : Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 01-01 08:00:02.274 1 1 I thermal_sys: Registered thermal governor 'step_wise' 01-01 08:00:02.274 1 1 I thermal_sys: Registered thermal governor 'power_allocator' 01-01 08:00:02.274 1 1 I NET : Registered protocol family 2 01-01 08:00:02.275 1 1 I : IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) 01-01 08:00:02.275 1 1 I : tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) 01-01 08:00:02.275 1 1 I : TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) 01-01 08:00:02.275 1 1 I : TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) 01-01 08:00:02.276 1 1 I TCP : Hash tables configured (established 16384 bind 16384) 01-01 08:00:02.276 1 1 I : UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) 01-01 08:00:02.276 1 1 I : UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) 01-01 08:00:02.276 1 1 I NET : Registered protocol family 1 01-01 08:00:02.276 1 1 I RPC : Registered named UNIX socket transport module. 01-01 08:00:02.276 1 1 I RPC : Registered udp transport module. 01-01 08:00:02.276 1 1 I RPC : Registered tcp transport module. 01-01 08:00:02.276 1 1 I RPC : Registered tcp NFSv4.1 backchannel transport module. 01-01 08:00:02.277 1 1 I NET : Registered protocol family 44 01-01 08:00:02.277 1 1 I : Trying to unpack rootfs image as initramfs... 01-01 08:00:02.394 1 1 I : Freeing initrd memory: 12456K 01-01 08:00:02.398 1 1 I : Initialise system trusted keyrings 01-01 08:00:02.398 1 1 I workingset: timestamp_bits=62 max_order=19 bucket_order=0 01-01 08:00:02.402 1 1 I : Key type cifs.idmap registered 01-01 08:00:02.402 1 1 I fuse : init (API version 7.31) 01-01 08:00:02.434 1 1 I NET : Registered protocol family 38 01-01 08:00:02.434 1 1 I : Key type asymmetric registered 01-01 08:00:02.434 1 1 I : Asymmetric key parser 'x509' registered 01-01 08:00:02.434 1 1 I : Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) 01-01 08:00:02.434 1 1 I : io scheduler mq-deadline registered 01-01 08:00:02.434 1 1 I : io scheduler kyber registered 01-01 08:00:02.434 1 1 I atomic64_test: passed 01-01 08:00:02.436 1 1 E : failed to get standby led pin assign 01-01 08:00:02.441 1 1 E : failed to get network led pin assign 01-01 08:00:02.447 1 1 E : failed to get gpio_sdcard_reused assign 01-01 08:00:02.453 1 1 E : get config err! 01-01 08:00:02.457 1 1 I : [DISP]disp_module_init 01-01 08:00:02.457 1 1 I disp 1000000.disp: Adding to iommu group 0 01-01 08:00:02.458 1 1 D display_fb_request,fb_id: 0 01-01 08:00:02.466 1 1 I : [DISP]disp_module_init finish 01-01 08:00:02.466 1 1 I rtc_ccu : sunxi ccu init OK 01-01 08:00:02.467 1 1 W : sunxi_sid_init()737 - insmod ok 01-01 08:00:02.467 1 1 I Serial : 8250/16550 driver, 4 ports, IRQ sharing disabled 01-01 08:00:02.469 1 1 I : misc dump reg init 01-01 08:00:02.469 1 1 I g2d 1480000.g2d: Adding to iommu group 0 01-01 08:00:02.470 1 1 I G2D : Module initialized.major:246 01-01 08:00:02.470 1 1 I deinterlace 1420000.deinterlace: Adding to iommu group 0 01-01 08:00:02.470 1 1 I deinterlace 1420000.deinterlace: version[1.0.0], ip=0x0 01-01 08:00:02.470 1 1 I : Gralloc Module initialized. 01-01 08:00:02.470 13 13 W cacheinfo: Unable to detect cache hierarchy for CPU 0 01-01 08:00:02.475 1 1 I brd : module loaded 01-01 08:00:02.478 1 1 I loop : module loaded 01-01 08:00:02.479 1 1 I zram : Added device: zram0 01-01 08:00:02.479 1 1 E : [NAND][NE] Not found valid nand node on dts 01-01 08:00:02.486 1 1 D [ADDR_MGT] addr_mgt_probe: module version: v1.0.11 01-01 08:00:02.486 1 1 D [ADDR_MGT] addr_mgt_probe: success. 01-01 08:00:02.487 1 1 I libphy : Fixed MDIO Bus: probed 01-01 08:00:02.487 1 1 I tun : Universal TUN/TAP device driver, 1.6 01-01 08:00:02.487 1 1 I : PPP generic driver version 2.4.2 01-01 08:00:02.487 1 1 I : PPP BSD Compression module registered 01-01 08:00:02.487 1 1 I : PPP Deflate Compression module registered 01-01 08:00:02.487 1 1 I : PPP MPPE Compression module registered 01-01 08:00:02.487 1 1 I NET : Registered protocol family 24 01-01 08:00:02.487 1 1 I : PPTP driver version 0.8.5 01-01 08:00:02.488 1 1 I ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 01-01 08:00:02.488 1 1 I ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver uas 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver usb-storage 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-alauda 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-cypress 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-datafab 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums_eneub6250 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-freecom 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-isd200 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-jumpshot 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-karma 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-onetouch 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-realtek 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-sddr09 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-sddr55 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-usbat 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver xpad 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver usb_acecad 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver aiptek 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver gtco 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver hanwang 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver kbtab 01-01 08:00:02.489 1 1 E axp2101_pek: axp2101-pek can not register without irq 01-01 08:00:02.496 1 1 W axp2101-pek: probe of axp2101-pek.0 failed with error -22 01-01 08:00:02.496 1 1 E sunxi-rtc 7000000.rtc: reset_control_get() failed 01-01 08:00:02.503 1 1 W sunxi-rtc 7000000.rtc: Fail to get clock 'rtc-spi' 01-01 08:00:02.503 1 1 I sunxi-rtc 7000000.rtc: errata__fix_alarm_day_reg_default_value(): ALARM0_DAY_REG=0, set it to 1 01-01 08:00:02.503 1 1 I sunxi-rtc 7000000.rtc: registered as rtc0 01-01 08:00:02.503 1 1 I sunxi-rtc 7000000.rtc: setting system clock to 1970-01-01T00:00:02 UTC (2) 01-01 08:00:02.503 1 1 I sunxi-rtc 7000000.rtc: sunxi rtc probed 01-01 08:00:02.504 1 1 I : i2c /dev entries driver 01-01 08:00:02.504 1 1 I : IR NEC protocol handler initialized 01-01 08:00:02.504 1 1 I : IR RC5(x/sz) protocol handler initialized 01-01 08:00:02.504 1 1 I uvcvideo: Unable to create debugfs directory 01-01 08:00:02.504 1 1 I usbcore : registered new interface driver uvcvideo 01-01 08:00:02.504 1 1 I : USB Video Class driver (1.1.1) 01-01 08:00:02.504 1 1 D : sunxi cedar version 1.1 01-01 08:00:02.504 1 1 I sunxi-cedar 1c0e000.ve: Adding to iommu group 0 01-01 08:00:02.504 1 1 D VE : install start!!! 01-01 08:00:02.504 1 1 I VE : cedar-ve the get irq is 20 01-01 08:00:02.504 1 1 D VE : install end!!! 01-01 08:00:02.505 1 1 I sunxi-cedar soc@3000000: ve1@1c0e000: Adding to iommu group 0 01-01 08:00:02.505 1 1 I VE : device ve1 just use to add iommu master 01-01 08:00:02.505 1 1 I sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) 01-01 08:00:02.505 1 1 I device-mapper: uevent: version 1.0.3 01-01 08:00:02.506 1 1 I device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com 01-01 08:00:02.507 1 1 I hidraw : raw HID events driver (C) Jiri Kosina 01-01 08:00:02.509 1 1 I usbcore : registered new interface driver usbhid 01-01 08:00:02.509 1 1 I usbhid : USB HID core driver 01-01 08:00:02.509 1 1 I ashmem : initialized 01-01 08:00:02.510 1 1 I optee : probing for conduit method from DT. 01-01 08:00:02.510 1 1 I optee : revision 2.5 01-01 08:00:02.510 1 1 I optee : initialized driver 01-01 08:00:02.510 1 1 D : drm_base=0x40000000 01-01 08:00:02.510 1 1 D : drm_size=0x0 01-01 08:00:02.510 1 1 D : tee_base=0x2000000 01-01 08:00:02.510 1 1 I usbcore : registered new interface driver snd-usb-audio 01-01 08:00:02.511 1 1 I netem : version 1.3 01-01 08:00:02.511 1 1 I : u32 classifier 01-01 08:00:02.511 1 1 I : input device check on 01-01 08:00:02.511 1 1 I : Actions configured 01-01 08:00:02.511 1 1 I xt_time : kernel timezone is -0000 01-01 08:00:02.511 1 1 I ipip : IPv4 and MPLS over IPv4 tunneling driver 01-01 08:00:02.512 1 1 I gre : GRE over IPv4 demultiplexor driver 01-01 08:00:02.512 1 1 I ip_gre : GRE over IPv4 tunneling driver 01-01 08:00:02.512 1 1 I : IPv4 over IPsec tunneling driver 01-01 08:00:02.513 1 1 I : Initializing XFRM netlink socket 01-01 08:00:02.513 1 1 I : IPsec XFRM device driver 01-01 08:00:02.513 1 1 I NET : Registered protocol family 10 01-01 08:00:02.514 1 1 I : Segment Routing with IPv6 01-01 08:00:02.514 1 1 I mip6 : Mobile IPv6 01-01 08:00:02.515 1 1 I sit : IPv6, IPv4 and MPLS over IPv4 tunneling driver 01-01 08:00:02.515 1 1 I ip6_gre : GRE over IPv6 tunneling driver 01-01 08:00:02.516 1 1 I NET : Registered protocol family 17 01-01 08:00:02.516 1 1 I NET : Registered protocol family 15 01-01 08:00:02.516 1 1 I Bluetooth: RFCOMM TTY layer initialized 01-01 08:00:02.516 1 1 I Bluetooth: RFCOMM socket layer initialized 01-01 08:00:02.516 1 1 I Bluetooth: RFCOMM ver 1.11 01-01 08:00:02.516 1 1 I Bluetooth: HIDP (Human Interface Emulation) ver 1.2 01-01 08:00:02.516 1 1 I Bluetooth: HIDP socket layer initialized 01-01 08:00:02.516 1 1 I l2tp_core: L2TP core driver, V2.0 01-01 08:00:02.516 1 1 I l2tp_ppp: PPPoL2TP kernel driver, V2.0 01-01 08:00:02.516 1 1 I tipc : Activated (version 2.0.0) 01-01 08:00:02.516 1 1 I NET : Registered protocol family 30 01-01 08:00:02.516 1 1 I tipc : Started in single node mode 01-01 08:00:02.516 1 1 I : registered taskstats version 1 01-01 08:00:02.516 1 1 I : Loading compiled-in X.509 certificates 01-01 08:00:02.516 1 1 I : Key type ._fscrypt registered 01-01 08:00:02.516 1 1 I : Key type .fscrypt registered 01-01 08:00:02.516 1 1 I : Key type fscrypt-provisioning registered 01-01 08:0Gatekeeper_TA_CreateEntryPoint0:02.517 1 1 I : HDMI 2.0 driver init start! 01-01 08:00:02.517 1 1 I : boot_hdmi=false 01-01 08:00:02.518 1 1 I : Can not find the node of esm 01-01 08:00:02.518 1 1 E : ERROR: pinctrl_get for HDMI2.0 DDC fail 01-01 08:00:02.524 1 1 I Get hdmi_power0: aldo1 01-01 08:00:02.524 1 1 W : (NULL device *): deviceless supply aldo1 not found, using dummy regulator 01-01 08:00:02.524 1 1 I Get hdmi_power1: dcdc1 01-01 08:00:02.524 1 1 W : (NULL device *): deviceless supply dcdc1 not found, using dummy regulator 01-01 08:00:02.526 1 1 I : hdmi_cec_init 01-01 08:00:02.526 1 1 I : HDMI2.0 module init end 01-01 08:00:02.526 1 1 E : tv_probe()1574 - of_property_read_string tv_power failed! 01-01 08:00:02.534 1 1 D : tv probe finished! 01-01 08:00:03.160 17 17 I [HDMI receive params]: tv mode: 0xa format:0x0 data bits:0x0 eotf:0x4 cs:0x101 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8 01-01 08:00:03.840 0 0 I [ C0] random: fast init done 01-01 08:00:04.185 17 17 W [DISP] de_rtmx_mgr_apply,line: 456: 01-01 08:00:04.185 17 17 W : ctx->output.hdr_type=0 01-01 08:00:04.185 17 17 W [DISP] de_rtmx_mgr_apply,line: 474: 01-01 08:00:04.185 17 17 W : ctx->output.hdr_type=0 01-01 08:00:04.209 17 17 W [DISP] disp_device_attached_and_enable,line: 235: 01-01 08:00:04.209 17 17 W : attached ok, mgr0<-->dev0 01-01 08:00:04.209 17 17 W [DISP] disp_device_attached_and_enable,line: 248: 01-01 08:00:04.209 17 17 W type : 4,mode:10,fmt:rgb,bits:8bits,eotf:4,cs:257 dvi_hdmi:2, range:2 scan:0 ratio:8 01-01 08:00:04.215 33 33 I sun50iw9-pinctrl 300b000.pinctrl: initialized sunXi PIO driver 01-01 08:00:04.216 33 33 W sun50iw9-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pc not found, using dummy regulator 01-01 08:00:04.216 33 33 I sunxi-mmc 4022000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.20 2021-12-17 11:02) 01-01 08:00:04.216 33 33 I sunxi-mmc 4022000.sdmmc: ***ctl-spec-caps*** 308 01-01 08:00:04.216 33 33 E sunxi-mmc 4022000.sdmmc: sdmmc1111 device,check dts 01-01 08:00:04.224 33 33 I sunxi-mmc 4022000.sdmmc: No vdmmc regulator found 01-01 08:00:04.224 33 33 I sunxi-mmc 4022000.sdmmc: No vd33sw regulator found 01-01 08:00:04.224 33 33 I sunxi-mmc 4022000.sdmmc: No vd18sw regulator found 01-01 08:00:04.224 33 33 I sunxi-mmc 4022000.sdmmc: No vq33sw regulator found 01-01 08:00:04.224 33 33 I sunxi-mmc 4022000.sdmmc: No vq18sw regulator found 01-01 08:00:04.224 33 33 W sunxi-mmc 4022000.sdmmc: Cann't get pin bias hs pinstate,check if needed 01-01 08:00:04.225 33 33 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.238 33 33 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.250 33 33 I sunxi-mmc 4022000.sdmmc: detmode:alway in(non removable) 01-01 08:00:04.251 33 33 I sunxi-mmc 4020000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.20 2021-12-17 11:02) 01-01 08:00:04.251 33 33 I sunxi-mmc 4020000.sdmmc: ***ctl-spec-caps*** 8 01-01 08:00:04.251 33 33 E sunxi-mmc 4020000.sdmmc: sdmmc1111 device,check dts 01-01 08:00:04.258 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.260 33 33 I sunxi-mmc 4020000.sdmmc: No vqmmc regulator found 01-01 08:00:04.260 33 33 I sunxi-mmc 4020000.sdmmc: No vdmmc regulator found 01-01 08:00:04.261 33 33 I sunxi-mmc 4020000.sdmmc: Got CD GPIO 01-01 08:00:04.261 33 33 I sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.261 33 33 I sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator 01-01 08:00:04.261 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.262 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm OD pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.274 33 33 I sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.285 33 33 I sunxi-mmc 4020000.sdmmc: detmode:gpio irq 01-01 08:00:04.285 33 33 I sunxi-mmc 4021000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.20 2021-12-17 11:02) 01-01 08:00:04.285 33 33 I sunxi-mmc 4021000.sdmmc: ***ctl-spec-caps*** 8 01-01 08:00:04.285 33 33 E sunxi-mmc 4021000.sdmmc: sdmmc1111 device,check dts 01-01 08:00:04.292 130 130 I sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.293 33 33 I sunxi-mmc 4021000.sdmmc: No vdmmc regulator found 01-01 08:00:04.293 33 33 I sunxi-mmc 4021000.sdmmc: No vd33sw regulator found 01-01 08:00:04.293 33 33 I sunxi-mmc 4021000.sdmmc: No vd18sw regulator found 01-01 08:00:04.293 33 33 I sunxi-mmc 4021000.sdmmc: No vq33sw regulator found 01-01 08:00:04.293 33 33 I sunxi-mmc 4021000.sdmmc: No vq18sw regulator found 01-01 08:00:04.293 33 33 W sunxi-mmc 4021000.sdmmc: Cann't get pin bias hs pinstate,check if needed 01-01 08:00:04.294 33 33 I sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.298 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm OD pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.298 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm OD pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.301 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm OD pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.304 33 33 I sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.315 33 33 I sunxi-mmc 4021000.sdmmc: detmode:manually by software 01-01 08:00:04.315 33 33 W sun50iw9-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-ph not found, using dummy regulator 01-01 08:00:04.315 33 33 E uart0 : get regulator failed 01-01 08:00:04.321 33 33 W uart0 : uart0 supply uart not found, using dummy regulator 01-01 08:00:04.321 33 33 E uart0 : uart0 error to get fifo size property 01-01 08:00:04.328 33 33 I uart0 : ttyAS0 at MMIO 0x5000000 (irq = 43, base_baud = 1500000) is a SUNXI 01-01 08:00:04.328 33 33 W : sw_console_setup()1807 - console setup baud 115200 parity n bits 8, flow n 01-01 08:00:04.328 33 33 I printk : console [ttyAS0] enabled 01-01 08:00:04.328 33 33 I printk : bootconsole [uart8250] disabled 01-01 08:00:04.329 33 33 E uart1 : get regulator failed 01-01 08:00:04.329 0 0 E : [ C0] sunxi-mmc 4021000.sdmmc: smc 2 p1 err, cmd 52, RTO !! 01-01 08:00:04.334 33 33 W uart1 : uart1 supply uart not found, using dummy regulator 01-01 08:00:04.342 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.342 33 33 I uart1 : ttyAS1 at MMIO 0x5000400 (irq = 44, base_baud = 1500000) is a SUNXI 01-01 08:00:04.343 0 0 E : [ C0] sunxi-mmc 4021000.sdmmc: smc 2 p1 err, cmd 52, RTO !! 01-01 08:00:04.343 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA0 01-01 08:00:04.360 130 130 I sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.360 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA1 01-01 08:00:04.370 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA2 01-01 08:00:04.380 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA3 01-01 08:00:04.390 130 130 I sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.390 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA4 01-01 08:00:04.400 127 127 E sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01) 01-01 08:00:04.410 127 127 E sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01) 01-01 08:00:04.421 130 130 W sunxi-mmc 4021000.sdmmc: card claims to support voltages below defined range 01-01 08:00:04.421 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA5 01-01 08:00:04.431 127 127 E sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01) 01-01 08:00:04.441 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA6 01-01 08:00:04.451 127 127 E sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01) 01-01 08:00:04.462 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA7 01-01 08:00:04.472 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA8 01-01 08:00:04.482 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA9 01-01 08:00:04.491 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 8 timing LEGACY(SDR12) dt B 01-01 08:00:04.492 33 33 W sun50iw9-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pa not found, using dummy regulator 01-01 08:00:04.492 33 33 I : sunxi gmac driver's version: 1.0.0 01-01 08:00:04.492 33 33 I gmac-power0: NULL 01-01 08:00:04.492 33 33 I gmac-power1: NULL 01-01 08:00:04.492 33 33 I gmac-power2: NULL 01-01 08:00:04.493 33 33 E sunxi_ir_startup: get ir protocol failed 01-01 08:00:04.494 33 33 I : Registered IR keymap rc_map_sunxi 01-01 08:00:04.500 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS200 dt B 01-01 08:00:04.500 33 33 I rc0 : sunxi-ir as /devices/platform/soc@3000000/7040000.s_cir/rc/rc0 01-01 08:00:04.500 33 33 I input : sunxi-ir as /devices/platform/soc@3000000/7040000.s_cir/rc/rc0/s_cir_rx 01-01 08:00:04.500 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 100000000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS200 dt B 01-01 08:00:04.501 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 100000000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS(SDR20) dt B 01-01 08:00:04.501 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 52000000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS(SDR20) dt B 01-01 08:00:04.502 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS400 dt B 01-01 08:00:04.502 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 100000000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS400 dt B 01-01 08:00:04.502 33 33 E : failed to get standby led pin assign 01-01 08:00:04.508 33 33 E : failed to get network led pin assign 01-01 08:00:04.514 33 33 E : failed to get gpio_sdcard_reused assign 01-01 08:00:04.520 33 33 I : gpio_pin_1(230) gpio_is_valid 01-01 08:00:04.520 127 127 I mmc0 : new HS400 MMC card at address 0001 01-01 08:00:04.521 127 127 I mmcblk0 : mmc0:0001 AQB11T 14.6 GiB 01-01 08:00:04.521 127 127 I mmcblk0boot0: mmc0:0001 AQB11T partition 1 4.00 MiB 01-01 08:00:04.522 127 127 I mmcblk0boot1: mmc0:0001 AQB11T partition 2 4.00 MiB 01-01 08:00:04.522 127 127 I mmcblk0rpmb: mmc0:0001 AQB11T partition 3 4.00 MiB, chardev (244:0) 01-01 08:00:04.523 33 33 I gpio : 230, name: PH6, ret = 0 01-01 08:00:04.523 33 33 I : gpio-sunxi probe success 01-01 08:00:04.525 33 33 W energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 1 >= em_cap_state0 01-01 08:00:04.525 33 33 D energy_model: Created perf domain 0-3 01-01 08:00:04.525 127 127 I mmcblk0 : p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 01-01 08:00:04.541 1 1 I sunxi-snd-mach soc@3000000: codec_mach: 5096000.codec <-> soc@3000000:codec_plat mapping ok 01-01 08:00:04.541 1 1 I sunxi-snd-mach soc@3000000: ahub_dam_mach: snd-soc-dummy-dai <-> 5097000.ahub_dam_plat mapping ok 01-01 08:00:04.542 1 1 I sunxi-snd-mach soc@3000000: ahub1_mach: snd-soc-dummy-dai <-> soc@3000000:ahub1_plat mapping ok 01-01 08:00:04.543 1 1 I sunxi-snd-mach soc@3000000: ahub2_mach: snd-soc-dummy-dai <-> soc@3000000:ahub2_plat mapping ok 01-01 08:00:04.544 1 1 I cfg80211: Loading compiled-in X.509 certificates for regulatory database 01-01 08:00:04.545 1 1 I cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' 01-01 08:00:04.545 34 34 W platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 01-01 08:00:04.545 34 34 W platform regulatory.0: Falling back to sysfs fallback for: regulatory.db 01-01 08:00:04.545 1 1 W clk : Not disabling unused clocks 01-01 08:00:04.545 1 1 E : get_key_map_info()187 - Failed to find "oe" in dts. 01-01 08:00:04.553 0 0 E : [ C0] sunxi-i2c sunxi-i2c5: SLA+W has been transmitted; ACK not received 01-01 08:00:04.562 1 1 E sunxi-i2c5: engine-mode: xfer failed(dev addr:0x10) 01-01 08:00:04.570 1 1 I : of_property_read_string ac200.tv_regulator_name fail 01-01 08:00:04.570 1 1 E : [ac200] get ave_regulator_name failed! 01-01 08:00:04.576 1 1 E : [ac200] pwm enable 01-01 08:00:04.581 1 1 I : ALSA device list: 01-01 08:00:04.581 1 1 I : #0: audiocodec 01-01 08:00:04.581 1 1 I : #1: ahubdam 01-01 08:00:04.581 1 1 I : #2: ahubhdmi 01-01 08:00:04.581 1 1 I : #3: ahubi2s2 01-01 08:00:04.581 1 1 W alloc_fd: slot 0 not NULL! 01-01 08:00:04.581 1 1 I : Freeing unused kernel memory: 1024K 01-01 08:00:04.596 1 1 E : Kernel init done 01-01 08:00:04.600 1 1 I : Run /init as init process 01-01 08:00:04.672 1 1 I init : init first stage started! 01-01 08:00:04.673 1 1 I init : Unable to open /lib/modules, skipping module loading. 01-01 08:00:04.673 1 1 I init : Copied ramdisk prop to /second_stage_resources/system/etc/ramdisk/build.prop 01-01 08:00:04.673 1 1 I init : Switching root to '/first_stage_ramdisk' 01-01 08:00:04.674 1 1 I init : [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt 01-01 08:00:04.676 1 1 I init : Using Android DT directory /proc/device-tree/firmware/android/ 01-01 08:00:04.693 1 1 I init : [libfs_mgr]Invalid ext4 superblock on '/dev/block/by-name/metadata' 01-01 08:00:04.694 1 1 E EXT4-fs (mmcblk0p19): VFS: Can't find ext4 filesystem 01-01 08:00:04.702 1 1 I init : [libfs_mgr]__mount(source=/dev/block/by-name/metadata,target=/metadata,type=ext4)=-1: Invalid argument 01-01 08:00:04.703 1 1 I random : init: uninitialized urandom read (16 bytes read) 01-01 08:00:04.704 1 1 I init : [libfs_mgr]Created logical partition system_a on device /dev/block/dm-0 01-01 08:00:04.704 1 1 I init : [libfs_mgr]Skipping zero-length logical partition: system_b 01-01 08:00:04.704 1 1 I random : init: uninitialized urandom read (16 bytes read) 01-01 08:00:04.705 1 1 I random : init: uninitialized urandom read (16 bytes read) 01-01 08:00:04.711 1 1 I EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1 01-01 08:00:04.718 1 1 I EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1 01-01 08:00:04.721 1 1 I EXT4-fs (dm-3): mounted filesystem without journal. Opts: barrier=1 01-01 08:00:04.724 1 1 I EXT4-fs (dm-2): mounted filesystem without journal. Opts: barrier=1 01-01 08:00:04.730 1 1 I newfs_msdos: executing /system/bin/newfs_msdos failed: No such file or directory 01-01 08:00:04.731 1 1 I newfs_msdos: newfs_msdos terminated by exit(255) 01-01 08:00:04.732 1 1 E FAT-fs (mmcblk0p23): bogus number of reserved sectors 01-01 08:00:04.739 1 1 I FAT-fs (mmcblk0p23): Can't find a valid FAT filesystem 01-01 08:00:04.770 1 1 W printk : init: 21 output lines suppressed due to ratelimiting 01-01 08:00:04.936 1 1 W init : DM_DEV_STATUS failed for system_ext_a: No such device or address 01-01 08:00:04.936 1 1 E init : Could not update logical partition 01-01 08:00:04.942 1 1 I init : Opening SELinux policy 01-01 08:00:04.952 1 1 I init : Loading SELinux policy 01-01 08:00:04.973 1 1 I SELinux : Permission nlmsg_getneigh in class netlink_route_socket not defined in policy. 01-01 08:00:04.973 1 1 I SELinux : the above unknown classes and permissions will be denied 01-01 08:00:04.973 1 1 I SELinux : policy capability network_peer_controls=1 01-01 08:00:04.973 1 1 I SELinux : policy capability open_perms=1 01-01 08:00:04.973 1 1 I SELinux : policy capability extended_socket_class=1 01-01 08:00:04.973 1 1 I SELinux : policy capability always_check_network=0 01-01 08:00:04.973 1 1 I SELinux : policy capability cgroup_seclabel=0 01-01 08:00:04.973 1 1 I SELinux : policy capability nnp_nosuid_transition=1 01-01 08:00:04.996 173 173 W auditd : type=1403 audit(0.0:2): auid=4294967295 ses=4294967295 lsm=selinux res=1 01-01 08:00:05.008 1 1 I selinux : SELinux: Loaded file_contexts 01-01 08:00:05.008 1 1 I selinux : 01-01 08:00:05.085 1 1 I init : init second stage started! 01-01 08:00:05.086 1 1 E FAT-fs (mmcblk0p23): bogus number of reserved sectors 01-01 08:00:05.094 1 1 I FAT-fs (mmcblk0p23): Can't find a valid FAT filesystem 01-01 08:00:05.094 1 1 E init : mount media_data fail*****Invalid argument 01-01 08:00:05.160 1 1 I init : Using Android DT directory /proc/device-tree/firmware/android/ 01-01 08:00:05.167 1 1 W init : Overriding previous property 'persist.sys.usb.config':'none' with new value 'adb' 01-01 08:00:05.168 1 1 W init : Overriding previous property 'persist.sys.usb.config':'adb' with new value 'none' 01-01 08:00:05.168 1 1 W init : Couldn't load property file '/vendor/default.prop': open() failed: No such file or directory: No such file or directory 01-01 08:00:05.174 1 1 W init : Couldn't load property file '/odm_dlkm/etc/build.prop': open() failed: No such file or directory: No such file or directory 01-01 08:00:05.176 1 1 W init : Couldn't load property file '/oem/build.prop': open() failed: No such file or directory: No such file or directory 01-01 08:00:05.177 1 1 E init : Could not set 'ro.boot.dynamic_partitions' to 'true' while loading .prop filesRead-only property was already set 01-01 08:00:05.191 1 1 E init : Could not set 'ro.boot.dynamic_partitions_retrofit' to 'true' while loading .prop filesRead-only property was already set 01-01 08:00:05.328 1 1 E cgroup1 : Unknown subsys name 'blkio' 01-01 08:00:05.337 1 1 E cgroup1 : Unknown subsys name 'memory' 01-01 08:00:06.010 175 175 W SELinux : Multiple same specifications for softwinner\.multiir. 01-01 08:00:05.548 161 161 I ueventd : ueventd started! 01-01 08:00:06.011 177 177 I SELinux : SELinux: Loaded service_contexts from: 01-01 08:00:06.011 177 177 I SELinux : /vendor/etc/selinux/vndservice_contexts 01-01 08:00:05.553 161 161 I selinux : SELinux: Loaded file_contexts 01-01 08:00:05.553 161 161 I selinux : 01-01 08:00:05.553 161 161 I ueventd : Parsing file /system/etc/ueventd.rc... 01-01 08:00:05.553 161 161 I ueventd : Added '/vendor/etc/ueventd.rc' to import list 01-01 08:00:05.553 161 161 I ueventd : Added '/odm/etc/ueventd.rc' to import list 01-01 08:00:05.554 161 161 I ueventd : Parsing file /vendor/etc/ueventd.rc... 01-01 08:00:05.554 161 161 I ueventd : Unable to read config file '/vendor/etc/ueventd.rc': open() failed: No such file or directory 01-01 08:00:05.554 161 161 I ueventd : Parsing file /odm/etc/ueventd.rc... 01-01 08:00:05.554 161 161 I ueventd : Unable to read config file '/odm/etc/ueventd.rc': open() failed: No such file or directory 01-01 08:00:05.797 158 158 I sunxi-rfkill soc@3000000: rfkill: module version: v1.0.9 01-01 08:00:05.797 158 158 W sunxi-rfkill soc@3000000: rfkill: pinctrl_lookup_state(default) failed! return ffffffffffffffed 01-01 08:00:05.797 158 158 E sunxi-rfkill soc@3000000: rfkill: get gpio chip_en failed 01-01 08:00:05.805 158 158 E sunxi-rfkill soc@3000000: rfkill: get gpio power_en failed 01-01 08:00:05.813 158 158 I sunxi-rfkill soc@3000000: rfkill: wlan_busnum (1) 01-01 08:00:05.813 158 158 W sunxi-rfkill soc@3000000: rfkill: Missing wlan_power. 01-01 08:00:05.813 158 158 I sunxi-rfkill soc@3000000: rfkill: wlan_regon gpio=210 assert=0 01-01 08:00:05.813 158 158 I sunxi-rfkill soc@3000000: rfkill: wlan_hostwake gpio=207 assert=0 01-01 08:00:05.813 158 158 I sunxi-rfkill soc@3000000: rfkill: wakeup source is enabled 01-01 08:00:05.813 158 158 W sunxi-rfkill soc@3000000: rfkill: Missing bt_power. 01-01 08:00:05.813 158 158 I sunxi-rfkill soc@3000000: rfkill: bt_rst gpio=211 assert=0 01-01 08:00:05.892 124 124 I : hdmi_hpd_sys_config_release 01-01 08:00:05.933 1 1 I : Registered swp emulation handler 01-01 08:00:05.977 173 173 I logd.auditd: start 01-01 08:00:06.013 175 175 I SELinux : SELinux: Loaded service_contexts from: 01-01 08:00:06.013 175 175 I SELinux : /system/etc/selinux/plat_service_contexts 01-01 08:00:06.013 175 175 I SELinux : /system_ext/etc/selinux/system_ext_service_contexts 01-01 08:00:06.013 175 175 I SELinux : /vendor/etc/selinux/vendor_service_contexts 01-01 08:00:06.017 176 176 I hwservicemanager: getFrameworkHalManifest: Reading VINTF information. 01-01 08:00:06.028 176 176 I hwservicemanager: getDeviceHalManifest: Reading VINTF information. 01-01 08:00:06.032 185 185 I format_device: Start format /dev/block/by-name/Reserve0 01-01 08:00:06.033 189 189 I format_device: fork to format /dev/block/by-name/Reserve0 01-01 08:00:06.046 1 1 I make_f2fs: 01-01 08:00:06.046 1 1 I make_f2fs: F2FS-tools: mkfs.f2fs Ver: 1.14.0 (2020-08-24) 01-01 08:00:06.046 1 1 I make_f2fs: 01-01 08:00:06.046 1 1 I make_f2fs: Info: Disable heap-based policy 01-01 08:00:06.046 1 1 I make_f2fs: Info: Debug level = 1 01-01 08:00:06.046 1 1 I make_f2fs: Info: Trim is enabled 01-01 08:00:06.046 1 1 I make_f2fs: Info: Set conf for android 01-01 08:00:06.046 1 1 I make_f2fs: Info: Enable utf8 with casefolding 01-01 08:00:06.046 1 1 I make_f2fs: Info: Enable Project quota 01-01 08:00:06.048 1 1 I make_f2fs: Info: No support kernel version! 01-01 08:00:06.049 176 176 I hwservicemanager: getDeviceHalManifest: Successfully processed VINTF information 01-01 08:00:06.049 176 176 I hwservicemanager: getFrameworkHalManifest: Successfully processed VINTF information 01-01 08:00:06.051 176 176 I hwservicemanager: hwservicemanager is ready now. 01-01 08:00:06.056 185 185 I format_device: format /dev/block/by-name/Reserve0 ok

目前排查到应该是sdio问题，sdio3.0的话无法注册wifi，sdio2.0可以注册，但是项目需要支持sdio3.0的，目前是安卓12内核5.4的，sdio3.0怎么才能用呢

用的wifi 模组是8822cs，sdio注册probe都没有跑，这有大佬知道吗

@momoyu 好了，是我的硬件问题

内核配置里面有一个配置开起来：

CONFIG_SUNXI_ADDR_MGT

同时设备树也需要加点东西，&soc节点里面加：

addr_mgt: addr_mgt@0 { compatible = "allwinner,sunxi-addr_mgt"; type_addr_wifi = <0x0>; type_addr_bt = <0x0>; type_addr_eth = <0x0>; status = "okay"; };

@c305139261 请问怎么进入这个烧录模式

我也在找H618的固件包，这个芯片的资源确实很少

@godzhou0909 在 LVDS显示有锯齿 中说：

@anruliu 多谢，改了确实好了
请教一下你改是那个文件,我改了没有效果,还有是不代码如下```
writel((readl(ioremap(0x05461084, 4)) | 0x20000000),
ioremap(0x05461084, 4));

@gao459459 怎么刷知道吗有固件吗

@yuzukitsuru 您好，这个表格不是太明白 clk和数据地址线也需要做等长么？请教下，我按图中的设置有没有什么问题？

@xiqiaou 我的DDR3用dragonhd测试是正常的

@mangogeek 大佬 能给个麻雀调试好麦克和功放的patch吗

@zack84369982 请问你用的哪一个刷机软件？

H616 可以直接用香橙派的固件刷？

机器真的漂亮！！

@slearn 是一样的

@antbot 1719989967848.jpg

我用最新的版本进行验证。

atf 编译没问题。 uboot 中做的修改如下，
a. axp313 的驱动已经包含在uboot，禁止掉原来的axp305, 使用 axp313.
b. 将axp313 的输出做如下调整，
DCDC2 调整为1200， DCDC3 调整为 1500

编译下载后打印如下内容就没任何输出了，

U-Boot SPL 2024.07-rc2-00388-g676903c1b9 (May 17 2024 - 22:20:11 +0800) DRAM: 2048 MiB Trying to boot from FEL

疑问： 好像 DRAM 的大小就没识别正确？ 应该是 1024 MiB .

各位有什么建议吗？

基本上PMIC只是保證時序要求，你如果用獨立的DC/DC 可以完成時序要求沒有不行的
對H616本身來說它不關心外部器件實質為何，只關心是否吻合時序，電壓/電流等條件是否能滿足
當然如果你需要動態調整電壓功能的話那對應的DC/DC 也需要有對應的驅動程序

@livpo 哇看上去非常令人振奋！ 效果很直观！

之前用 PyTorch 做过离线语音识别，最多支持几十个指令词和几十个名词，可以扩展这个场景~ 有需要可以交流交流

-> Device Drivers │
│ -> Network device support (NETDEVICES [=y]) │
│ -> Ethernet driver support (ETHERNET [=y]) │
│ -> STMicroelectronics devices (NET_VENDOR_STMICRO [=y]) │
│ (1) -> STMicroelectronics Multi-Gigabit Ethernet driver (STMMAC_ETH [=y])

-> Device Drivers │
│ -> Network device support (NETDEVICES [=y]) │
│ -> Ethernet driver support (ETHERNET [=y]) │
│ -> STMicroelectronics devices (NET_VENDOR_STMICRO [=y]) │
│ -> STMicroelectronics Multi-Gigabit Ethernet driver (STMMAC_ETH [=m]) │
│ (3) -> STMMAC Platform bus support (STMMAC_PLATFORM [=m])

-> Device Drivers │
│ -> Network device support (NETDEVICES [=y]) │
│ -> Ethernet driver support (ETHERNET [=y]) │
│ -> STMicroelectronics devices (NET_VENDOR_STMICRO [=y]) │
│ -> STMicroelectronics Multi-Gigabit Ethernet driver (STMMAC_ETH [=y]) │
│ -> STMMAC Platform bus support (STMMAC_PLATFORM [=y]) │
│ (1) -> Allwinner sun8i GMAC support (DWMAC_SUN8I [=m])

-> Device Drivers │
│ -> Network device support (NETDEVICES [=y]) │
│ -> Ethernet driver support (ETHERNET [=y]) │
│ -> STMicroelectronics devices (NET_VENDOR_STMICRO [=y]) │
│ -> STMicroelectronics Multi-Gigabit Ethernet driver (STMMAC_ETH [=y]) │
│ (1) -> STMMAC Platform bus support (STMMAC_PLATFORM [=y])

Symbol: PCS_XPCS [=y] │
│ Type : tristate │
│ Defined at drivers/net/pcs/Kconfig:8 │
│ Depends on: NETDEVICES [=y] │
│ Selects: PHYLINK [=y] │
│ Selected by [y]: │
│ - STMMAC_ETH [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_STMICRO [=y] && HAS_IOMEM [=y] && HAS_DMA [=y] && PTP_1588_CLOCK_OPTIONAL [=y] │
│ Selected by [n]: │
│ - NET_DSA_SJA1105 [=n] && NETDEVICES [=y] && NET_DSA [=y] && SPI [=y] && PTP_1588_CLOCK_OPTIONAL [=y]

配置这几个应该就行了，这是kernel6.1的

bootcmd 和 boot args 可以在 uboot 中设置
[*] Enable boot arguments │ │
│ │ (console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait rw) Boot arguments

[*] Enable a default value for bootcmd │ │
│ │ (fatload mmc 0:1 0x40200000 Image;fatload mmc 0:1 0x4fa00000 sun50i-h616-orangepi-zero2.dtb;booti 0x40200000│ │

这样编译后直接能启动

@fleieng 你用的不是PMIC？独立的DcDC那

@awwwwa 那么Edison怎么烧录

用的哪个版本的u-boot？

想要使用wifi adb 应该做什么？

列表目前我的板安装这个操作可以正常使用adb

@unkown 解决了，模块加载没放初始化那里，加载的太晚导致里有些东西没起来。

看着不错啊，另外度盘链接失效了，求补

@davidq 经过多次断电重启，发现有时候在出现“Starting kernel ...”后，能继续下去，但最后还是会卡住。相送日志如下：
boot-log2.txt

@whycanservice 是什么原因调整的啊，能帮忙解释一下吗？

@qi777 可能是串口时钟不支持这个波特率，我在T113-i上也遇到过这个情况，后面修改串口的时钟就不会乱码了。

@yanmingjian H3的刷入系统文件一直重启，能解决吗？

SoC一般不推荐GPIO翻转，如果需要提高需要提高APB的时钟，但是修改APB的时钟会对ＡＰＢ上的全部设备造成影响，例如ＵＡＲＴ，ＴＷＩ，ＰＷＭ，Ｔｉｍｅｒ全部需要重新计算频率配置

1ea7f7cb-1d03-48b4-9151-fb997d0dc2eb-image.png

看看这个帖子有没有帮助：
【FAQ】全志D1芯片 XR829扫卡失败问题排查
https://bbs.aw-ol.com/topic/757/share/1

没什么区别，直接主线6.1了

@leefei https://github.com/bigtreetech/CB1-Kernel/blob/kernel-5.16/kernel/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi

在reboot老化的时候，关闭休眠

从kernel的log来看，安卓层先发起了reboot，内核也收到reboot的消息

#1[2023-07-11,16:56:45][ 41.176369][ T164] init: Received sys.powerctl=‘reboot,’ from pid: 490 (system_server) [2023-07-11,16:56:45][ 41.185428][ T164] init: sys.powerctl: do_shutdown: 0 IsShuttingDown: 0

同时从安卓的log来看，安卓层也会有息屏关机的动作。

downloadFileByUrl.jpg

所以这个时候是刚好在reboot的过程中，安卓执行休眠打断了reboot并且休眠成功。一般建议做reboot老化的时候要关掉休眠，之前也出过类似现象

@lisom 在 h616 怎么加BGA96的DDR4,现在的兼容器件有哪些，软件要怎么适配？ 中说：

杭州 这边 有对应的代理商吗？

我们的代理一般不按照区域分，一般按芯片系列分，且主要集中在深圳
可以找找深圳的H系列代理易信泰 @YiXinTai

SUPPER LIST 中只有一颗是测试过的：H5AN4G6NBJR，有更新吗

@yuzukitsuru 你支持H616的tina，在哪里下载的阿？

@whycanservice 现在tina linux在哪里下载阿？