Navigation

    全志在线开发者论坛

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • 在线文档
    • 社区主页
    1. Home
    2. Popular
    Log in to post
    • All categories
    • All Topics
    • New Topics
    • Watched Topics
    • Unreplied Topics
    • All Time
    • Day
    • Week
    • Month

    • 公告
    • 芯片
    •          T Series
    •          A Series
    •          V Series
    •          MR Series
    •          H/F/TV Series
    •          Wireless & Analog Series
    • Special
    •          创龙科技专区
    •          飞凌嵌入式专区
    •          爱搞机专区
    • Technical topics
    •          RTOS
    •          Linux
    •          GUI
    • Others
    •          代码下载问题专区
    •          编译和烧写问题专区
    •          其它全志芯片讨论区
    •          灌水区
    • S

      v853板子做为usb device通过usb接入pc,有没推荐好的方案或者开源的库和案例来传输私有音视频.
      V Series • Posted at • sofia

      0 Votes
      6 Replies
      2335 Views

      A Replied at

      @sofia USB 2.0 的速率,大约为 34MByte/s

      6
    • X

      losetup 无法设置循环设备:没有这样的文件或目录
      V Series • Posted at • xjy_5

      0 Votes
      6 Replies
      2554 Views

      X Replied at

      @awwwwa 感谢回复,现在可以用了,我都不知道有这些配置
      现在的make menuconfig 的配置
      13da7059-f608-4ec5-b5a5-94782e411ff8-image.png

      make kernel_menuconfig的配置,搜loop,选的第二个
      bc7fe151-8861-4a80-a0df-36112a3d222c-image.png

      6
    • S

      关于全志4.9版本内核一个bug
      V Series • Posted at • sofia

      0 Votes
      6 Replies
      2630 Views

      X Replied at

      @sofia 你看电路图呗,100ask上是把usbhub和otg接口用一个开关芯片一起接到typec,又用两个电阻把otg接口接到typec,我用的时候老是不稳定,现在把usbhub摘掉了,稳多了。

      6
    • L

      D1s芯片 PhoenixSuit 烧写失败请求指导
      编译和烧写问题专区 • Posted at • lyg116

      0 Votes
      6 Replies
      2770 Views

      whycan Replied at

      (全开源)D1s排针版本资料汇总
      https://bbs.aw-ol.com/topic/3792

      6
    • M

      V3s nor flash 烧录之后必须断电才能引导?
      编译和烧写问题专区 • Posted at • march1993

      0 Votes
      6 Replies
      2705 Views

      A Replied at

      @march1993 不太清楚NOR的布局,可以试试换NAND。V3s比较老的平台了解的不多

      6
    • A

      V853 SDK : PMU TWI
      V Series • Posted at • Alb702

      0 Votes
      6 Replies
      2866 Views

      A Replied at

      @awwwwa 在 V853 SDK : PMU TWI 中说:

      V853s

      我在 lunch 中选择了v853s-sc1718v选项。 使用 sys_config.fex 中的必要参数重建系统。 现在 boot0 阶段运行没有错误。
      谢谢你!

      6
    • I

      f133采用melis sdk 1.4,打包后无法通过phoenixsuit下载到norflash
      MR Series • Posted at • iincity

      0 Votes
      6 Replies
      2881 Views

      xiaowenge Replied at

      @iincity 在 f133采用melis sdk 1.4,打包后无法通过phoenixsuit下载到norflash 中说:

      @xiaowenge 芯片是f133A,选的里面的f133-b工程😞

      那肯定不行的,chipID都不一样,烧不进去的

      6
    • C

      T113 修改打印日志口
      MR Series • Posted at • cwj1986521

      0 Votes
      6 Replies
      2476 Views

      C Replied at

      @wanglang
      参考下
      https://bbs.aw-ol.com/topic/1673/全志芯片tina-linux-修改-uart-引脚-uart端口/3
      这个 按这个来处理 就能正常了

      6
    • D

      V851s使用spi nand启动不了 VFS: Cannot open root device "ubi0_4" or unknown-block(0,0): error -2
      V Series • Posted at • daMing123

      0 Votes
      6 Replies
      2191 Views

      L Replied at

      解决了吗?遇到同样的问题,太折腾了

      6
    • L

      Meils的PWM BUG
      MR Series • Posted at • leomini5

      0 Votes
      6 Replies
      2450 Views

      L Replied at

      @awwwwa 你这个也是错的,这么写会把所有通道都关掉,而不是指定的那个……

      6
    • baiwen

      V851SE TinyVision地表最帅AI开发板来了! @yuzukihd
      V Series • Posted at • 100ask

      1 Votes
      6 Replies
      3033 Views

      C Replied at

      @q1215200171 非常感谢

      6
    • L

      启动内核卡在Waiting for root device /dev/mmcblk0p2...
      V Series • Posted at • lmmuyu

      0 Votes
      6 Replies
      3684 Views

      R Replied at

      @lmmuyu 谢谢。我试试

      6
    • Y

      XR819连接wiif无反应
      Wireless & Analog Series • Posted at • y97788

      0 Votes
      6 Replies
      2995 Views

      Y Replied at

      终于调通了,简直就是一个大坑...由于WiFi驱动里面cfg80211.h的接口定义跟内核版本的cfg80211.h的接口不一致,导致调用时传入的数据不对了,但是奇怪的是,这编译时或者运行时为什么不报错呢......

      6
    • M

      R128 WIFI AP模式获取连接设备的IP地址的问题
      A Series • Posted at • Mxf4511

      0 Votes
      6 Replies
      3103 Views

      M Replied at

      @awwwwa 好的,感谢我试试

      6
    • C

      R818 ubuntu20.04编译
      编译和烧写问题专区 • Posted at • camperzzz

      0 Votes
      6 Replies
      2849 Views

      G Replied at

      请问一下 Ubuntu2404 可不可以正常编译呢

      6
    • C

      XR829在T113-i芯片+原SDK基础上蓝牙有成功过的伙伴吗?
      Wireless & Analog Series • Posted at • chrisvista

      0 Votes
      6 Replies
      2515 Views

      C Replied at

      @chrisvista 已经看到了是5.4.61

      6
    • L

      T113 ledc 驱动bug 长时间运行以后出错
      MR Series • Posted at • leomini5

      1 Votes
      6 Replies
      2505 Views

      L Replied at

      @awwwwa. 这个又随机出现了一次,这次好了,刚启动就卡了

      [ 9.846865] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 9.854673] ubi0: good PEBs: 492, bad PEBs: 0, corrupted PEBs: 0 [ 9.861417] ubi0: user volume: 9, internal volumes: 1, max. volumes count: 128 [ 9.869527] ubi0: max/mean erase counter: 6/2, WL threshold: 4096, image sequence number: 0 [ 9.878910] ubi0: available PEBs: 0, total reserved PEBs: 492, PEBs reserved for bad PEB handling: 20 [ 9.889275] ubi0: background thread "ubi_bgt0d" started, PID 1123 [ 9.897344] block ubiblock0_5: created from ubi0:5(rootfs) [ 9.903517] initcall ubi_init+0x0/0x230 returned 0 after 404120 usecs [ 9.910787] calling init_sunxi_hci_class+0x0/0x40 @ 1 [ 9.916628] initcall init_sunxi_hci_class+0x0/0x40 returned 0 after 60 usecs [ 9.924540] calling usb_manager_init+0x0/0x10 @ 1 [ 9.930782] probe of soc@3000000:usbc0@0 returned 1 after 650 usecs [ 9.937986] initcall usb_manager_init+0x0/0x10 returned 0 after 7861 usecs [ 9.945705] calling of_fdt_raw_init+0x0/0x80 @ 1 [ 9.952628] initcall of_fdt_raw_init+0x0/0x80 returned 0 after 1586 usecs [ 9.960266] calling tcp_congestion_default+0x0/0x14 @ 1 [ 9.966229] initcall tcp_congestion_default+0x0/0x14 returned 0 after 3 usecs [ 9.974245] calling regulatory_init_db+0x0/0x90 @ 1 [ 9.979947] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 9.986496] initcall regulatory_init_db+0x0/0x90 returned 0 after 11 usecs [ 9.989659] cfg80211: failed to load regulatory.db [ 9.997336] calling clk_disable_unused+0x0/0xd8 @ 1 [ 10.008337] clk: Not disabling unused clocks [ 10.013131] initcall clk_disable_unused+0x0/0xd8 returned 0 after 4676 usecs [ 10.021067] calling regulator_init_complete+0x0/0x4c @ 1 [ 10.027140] initcall regulator_init_complete+0x0/0x4c returned 0 after 2 usecs [ 10.035242] calling of_platform_sync_state_init+0x0/0x10 @ 1 [ 10.041720] initcall of_platform_sync_state_init+0x0/0x10 returned 0 after 2 usecs [ 10.050226] calling alsa_sound_last_init+0x0/0x78 @ 1 [ 10.055991] ALSA device list: [ 10.059333] #0: audiocodec [ 10.062566] initcall alsa_sound_last_init+0x0/0x78 returned 0 after 6415 usecs [ 10.070682] alloc_fd: slot 0 not NULL! [ 10.077875] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [ 10.087696] devtmpfs: mounted [ 10.092960] Freeing unused kernel memory: 1024K [ 10.106639] Run /pseudo_init as init process [ 10.338332] UBIFS (ubi0:7): Mounting in unauthenticated mode [ 10.344830] UBIFS (ubi0:7): background thread "ubifs_bgt0_7" started, PID 1160 [ 10.416213] UBIFS (ubi0:7): recovery needed [ 10.595230] UBIFS (ubi0:7): recovery completed [ 10.600446] UBIFS (ubi0:7): UBIFS: mounted UBI device 0, volume 7, name "rootfs_data" [ 10.609269] UBIFS (ubi0:7): LEB size: 258048 bytes (252 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 10.620423] UBIFS (ubi0:7): FS size: 43352064 bytes (41 MiB, 168 LEBs), journal size 2064385 bytes (1 MiB, 8 LEBs) [ 10.632059] UBIFS (ubi0:7): reserved for root: 2047624 bytes (1999 KiB) [ 10.639502] UBIFS (ubi0:7): media format: w5/r0 (latest is w5/r0), UUID DE81D6D0-9195-433E-8407-0A0643D8B249, small LPT model [ 10.776081] UBIFS (ubi0:8): Mounting in unauthenticated mode [ 10.782660] UBIFS (ubi0:8): background thread "ubifs_bgt0_8" started, PID 1189 [ 10.853232] UBIFS (ubi0:8): recovery needed [ 10.905789] UBIFS (ubi0:8): recovery completed [ 10.910922] UBIFS (ubi0:8): UBIFS: mounted UBI device 0, volume 8, name "UDISK" [ 10.919146] UBIFS (ubi0:8): LEB size: 258048 bytes (252 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 10.930293] UBIFS (ubi0:8): FS size: 6451200 bytes (6 MiB, 25 LEBs), journal size 2064385 bytes (1 MiB, 6 LEBs) [ 10.941623] UBIFS (ubi0:8): reserved for root: 304706 bytes (297 KiB) [ 10.948859] UBIFS (ubi0:8): media format: w5/r0 (latest is w5/r0), UUID 8DD93196-4954-4BBB-BAAA-6A26D5F11D42, small LPT model [ 11.090716] calling init_module+0x0/0x1000 [usb_storage] @ 1192 [ 11.097644] usbcore: registered new interface driver usb-storage [ 11.104418] initcall init_module+0x0/0x1000 [usb_storage] returned 0 after 6720 usecs [ 11.133041] calling init_module+0x0/0x1000 [sunxi_gpadc] @ 1195 [ 11.140948] sunxi_gpadc_init,2151, success [ 11.145919] initcall init_module+0x0/0x1000 [sunxi_gpadc] returned 0 after 4897 usecs [ 11.384656] calling init_module+0x0/0x1000 [8821cs] @ 1199 [ 11.520716] probe of mmc1:0001:1 returned 1 after 129665 usecs [ 11.531869] initcall init_module+0x0/0x1000 [8821cs] returned 0 after 136826 usecs [ 12.671358] start_addr=(0x8000), end_addr=(0x10000), buffer_size=(0x8000), smp_number_max=(4096) [ 12.934865] file system registered [ 12.959776] configfs-gadget 4100000.udc-controller: failed to start g1: -19 [ 12.993136] read descriptors [ 12.996396] read strings [ 13.143867] Mass Storage Function, version: 2009/09/11 [ 13.151051] LUN: removable file: (no medium) [ 13.171584] ffs_data_put(): freeing [ 13.466759] sunxi_usb_udc 4100000.udc-controller: 4100000.udc-controller supply udc not found, using dummy regulator [ 17.316670] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 40.386516] usb1-vbus: disabling [ 73.449941] sunxi-ohci 4200400.ohci1-controller: ohci_irq: fullspeed or lowspeed device disconnect [ 73.460075] sunxi-ehci 4200000.ehci1-controller: ehci_irq: highspeed device connect [ 73.468701] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 73.496491] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 73.526478] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 73.556476] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 73.586476] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 73.616476] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 73.646478] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 73.676481] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 73.689137] sunxi-ehci 4200000.ehci1-controller: ehci_irq: highspeed device disconnect [ 73.698074] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 73.710304] sunxi-ohci 4200400.ohci1-controller: ohci_irq: fullspeed or lowspeed device connect [ 73.720095] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 73.746480] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 73.776481] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 73.806482] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 73.836477] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 73.866474] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 73.896477] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 73.926474] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 73.956476] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 73.986474] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.016476] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.046475] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.076473] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.106477] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.136475] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.166475] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.196474] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.226475] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.238724] usb 2-1: new low-speed USB device number 6 using sunxi-ohci [ 74.256473] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.268714] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.280944] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.293195] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.305446] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.317710] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.329974] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.342204] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.354501] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.366733] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.416499] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.446494] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.476487] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.506479] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.536475] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.566484] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.596480] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.626477] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.638736] usb 2-1: device descriptor read/64, error -62 [ 74.656474] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.668724] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.680952] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.696464] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.708702] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.720947] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.733180] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.745403] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.757631] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.769866] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.782084] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.794292] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.806515] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.818737] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.830943] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.843160] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.855376] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.867595] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.879839] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.892065] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.904287] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.916516] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.928765] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.940996] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.953220] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.965472] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.977710] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 74.989919] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 75.002136] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 75.014349] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 75.026586] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 75.038795] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 75.051020] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 75.063238] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 75.075444] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 75.096466] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 75.108682] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 75.120910] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 75.133142] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 75.145366] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 75.157627] sunxi_ledc_irq_handler()1313 - wait time is more than 600000 ns,going to reset ledc and drop this operation! [ 75.496515] usb 2-1: device descriptor read/64, error -62 [ 75.836505] usb 2-1: new low-speed USB device number 7 using sunxi-ohci [ 76.056508] usb 2-1: device descriptor read/64, error -62 [ 76.406499] usb 2-1: device descriptor read/64, error -62 [ 76.526556] usb usb2-port1: attempt power cycle [ 77.076511] usb 2-1: new low-speed USB device number 8 using sunxi-ohci [ 77.526498] usb 2-1: device not accepting address 8, error -62 [ 77.746515] usb 2-1: new low-speed USB device number 9 using sunxi-ohci [ 78.186522] usb 2-1: device not accepting address 9, error -62 [ 78.193154] usb usb2-port1: unable to enumerate USB device
      6
    • Z

      mboot和mkernel可以代替make命令吗
      编译和烧写问题专区 • Posted at • ZiFeiYu

      0 Votes
      6 Replies
      2325 Views

      Z Replied at

      @awwwwa 好的谢谢

      6
    • S

      有没有搞过蓝牙wifi模块 RF测试的啊
      编译和烧写问题专区 • Posted at • SkrLOU

      0 Votes
      6 Replies
      2601 Views

      S Replied at

      @kunyi 我现在单纯的去编译出wifi_test,blue_test,推到板子里都有问题啊![c8dc1721-08cc-4f42-a5d3-7a368b9bc237-$@(3@C$}}F5(}@3M6FL]V.png](/assets/uploads/files/1711589918564-c8dc1721-08cc-4f42-a5d3-7a368b9bc237-3-c-f-96-5-96-3m6fl-v.png)
      这个是为啥啊

      6
    • F

      请问哪位大佬还有t113的SDK?
      灌水区 • Posted at • fameL

      2 Votes
      6 Replies
      2553 Views

      Y Replied at

      @f8999823 我能搜到

      6
    • lajuchenghui

      使用tinyvision制作简单的网络摄像机IPCv2
      V Series • Posted at • 逸俊晨晖

      8 Votes
      6 Replies
      2975 Views

      N Replied at

      大佬太厉害了👍 ,最终的延迟有多少?

      6
    • E

      T113-S3 LDOA-OUT 输出 2.1V
      T Series • Posted at • Edward.X

      0 Votes
      6 Replies
      1958 Views

      Q Replied at

      确实是底部引脚没焊接到,我重新用锡膏有底部加热锡熔化进去后LDOA-OUT输出电压是1.8V了

      6
    • Y

      T113的TinaLinux分配给/mnt/UDISK太大 如何加大给文件系统的根目录 也就是overlay
      其它全志芯片讨论区 • Posted at • ysc3650145

      1 Votes
      6 Replies
      2322 Views

      Y Replied at

      @fanhua 在 T113的TinaLinux分配给/mnt/UDISK太大 如何加大给文件系统的根目录 也就是overlay 中说:

      修改一下openwrt的分区表
      位置在Tina5.0-V1.1-Old/openwrt/openwrt/target/linux/t113-方案名/base-files/etc/config

      config 'mount' option target '/overlay' option device '/dev/by-name/UDISK' option options 'rw,async' option enabled '1'

      我的是t113-bingpi_m2好像就没有这目录啊

      6
    • Q

      T113 fw_printenv工具使用不了
      T Series • Posted at • qz_18732517808

      0 Votes
      6 Replies
      2048 Views

      Y Replied at

      怎么处理的,我遇到相同问题了,解决了吗?

      6
    • qinmu

      adb烧录失败
      编译和烧写问题专区 • Posted at • qinmu

      0 Votes
      6 Replies
      1915 Views

      L Replied at

      @q87552 卸载设备,进入FEL模式重新识别设备,之后把未知设备安装驱动就能安装成功了,你试一下,在FEL模式好像才能安装这个驱动

      6
    • Y

      Tian的t113使用UDISK作为overlay,但是每次跟新镜像的时候有一些数据还是上次更新前的。
      其它全志芯片讨论区 • Posted at • ysc3650145

      0 Votes
      6 Replies
      1465 Views

      Z Replied at

      @ysc3650145 PhoenixSuit_V2.0.1.zip ,我的主板是用SPINAND的,烧录SD卡要用PhoenixCard,你试试格式化SD卡后再烧录?

      6
    • L

      t113-s3支持双屏同显,和异显吗
      T Series • Posted at • lyg116

      2 Votes
      6 Replies
      2083 Views

      S Replied at

      @lyg116 那是支持不?如果不用spi方案~ 4lane的mipi,没法分成两个2lane驱动两个屏吧

      6
    • W

      求助:V851编译失败
      V Series • Posted at • wuwenli_81

      0 Votes
      6 Replies
      1009 Views

      J Replied at

      @wuwenli_81 请上传完整log,如果numpy编译不过,可以尝试menuconfig里关闭这项配置暂时跳过

      6
    • T

      T113-S3,adb shell乱码[T113_QA0002]
      T Series • Posted at • tivon

      0 Votes
      6 Replies
      2290 Views

      T Replied at

      换了一个版本的ADB工具解决
      PowerShell下还是有乱码,但是通过cmd命令切换到普通命令行模式下再进行adb shell就不会出乱码了
      cmd模式下输入adb version得到以下版本信息
      Android Debug Bridge version 1.0.41
      Version 34.0.4-10411341
      下载地址
      https://pan.baidu.com/s/159llUDg8st8MXYmeQ1FMUg?pwd=mp3o

      6
    • T

      T113-S3手动改变IO输出电平失败[T113_QA0004]
      T Series • Posted at • tivon

      1 Votes
      6 Replies
      1471 Views

      T Replied at

      已解决,通过https://v853.docs.aw-ol.com/soft/dev_gpio/中的方法试验成功

      6
    • E

      F133 RTSCTS LINE
      H/F/TV Series • Posted at • emresensoy

      0 Votes
      6 Replies
      1055 Views

      E Replied at

      SOLVED,

      I used a device to sniff UART between F133 and slave device,
      Its RTS CTS line corrupted, so I removed it and everything ok now,

      thanks for your kind help

      6
    • X

      T507启动卡启动失败,用的是供应商提供的镜像,但是启动显示找不到内核镜像是为什么?
      T Series • Posted at • Xiduanya

      0 Votes
      6 Replies
      913 Views

      X Replied at

      @awwwwa 因为我是想在量产卡烧录的时候做一个烧录进度条显示在lvds接口的屏幕上,然后根据之前其他平台的开发经验,是在启动卡内dd镜像到emmc同时显示进度条,所以才做的启动卡。
      如果可以的话,不知道是否有推荐的方法或者最佳实践可以实现这一点?

      6
    • q1215200171

      轻算力也能玩大模型,V821成功对接DeepSeek和豆包视觉大模型
      V Series • Posted at • budbool

      3 Votes
      6 Replies
      1481 Views

      J Replied at

      @indream 👍 👍 👍

      6
    • T

      求一份v3s tina sdk
      V Series • Posted at • TX_dw

      1 Votes
      6 Replies
      997 Views

      I Replied at

      @tx_dw github上有v3s linux sdk

      6
    • L

      T113S3 I2C异常
      T Series • Posted at • lztmfx

      0 Votes
      6 Replies
      699 Views

      Z Replied at

      @lztmfx DMA功能的

      6
    • Kirin

      【转载】探游·R329·AI部署实战(二)移植搭建AI环境
      A Series • Posted at • 陈塘关李靖

      0 Votes
      5 Replies
      2635 Views

      BedRock Replied at

      问一下AIPU在 D1上有适配吗

      5
    • LogPI

      连接wifi无法ping通
      MR Series • Posted at • LogPI

      0 Votes
      5 Replies
      2801 Views

      whycan Replied at

      @rcfly 学习了

      5
    • C

      V833@Melis4.0 开发QuickStart
      RTOS • melis • Posted at • caozilong

      0 Votes
      5 Replies
      4289 Views

      C Replied at

      @pcmxz 在 V833@Melis4.0 开发QuckStart 中说:

      终于把melis上支持ap6212/ap6181的驱动搞稳定咯,melis什么时候把自带的ap6203开源啊?

      👍 望分享模组集成的过程,让坛主给你加鸡腿😃

      5
    • Q

      D1为什么没有把2路GPADC引出来
      MR Series • Posted at • qhddz

      0 Votes
      5 Replies
      2308 Views

      Kirin Replied at

      @qhddz 是的,30pin的话愿意是给麦克风用的,需要线序对上的专门的排线,我们有做带按键的麦克风子板。但是如果是用做GPADC的话,觉得还是单独放在插针的地方比较好,这样插上去就能用,也不会和麦克风子板冲突,以免硬件没有集成的时候插了麦克风子板就不能用您说的这些传感器了

      5
    • Marleo

      D1内部的SRAM是多大呢
      MR Series • Posted at • Marleo

      0 Votes
      5 Replies
      2372 Views

      Kirin Replied at

      @chenhongji 在 D1内部的SRAM是多大呢 中说:

      @marleo 手册在哪下载呢

      全志客户服务平台:https://open.allwinnertech.com/#/doc?menuID=2
      ——》文档中心
      ——》D1

      5
    • baiwen

      完整支持buildroot 2021 LTS构建D1开发板SD卡系统镜像
      MR Series • Posted at • 100ask

      3 Votes
      5 Replies
      3434 Views

      Q Replied at

      @whycan 这条指令是平头哥扩展指令集的,一般的编译器会出问题吧,

      5
    • K

      官方能提供一个R329的应用案例吗
      A Series • Posted at • kingsong

      0 Votes
      5 Replies
      2375 Views

      Kirin Replied at

      @kingsong 在 官方能提供一个R329的应用案例吗 中说:

      @kirin 躲起来 不是更没人了😞

      不好意思 打错字了 ,躲->多

      5
    • Kirin

      2021年D1哪吒开发板第一期成果汇报
      MR Series • Posted at • 陈塘关李靖

      1 Votes
      5 Replies
      3366 Views

      E Replied at

      @xiaowenge
      不负所爱,自创奇迹:哪吒D1板卡 系统OS介绍
      https://www.risc-vduino.cc/thread-1998-1-1.html

      5
    • H

      请教下:刚拿到的板子,只有hdmi显示器,连接板子后没有任何显示,该如何处理
      MR Series • Posted at • heinhe

      0 Votes
      5 Replies
      2147 Views

      H Replied at

      @heinhe 看了帖子说intel可以,amd的不行。查了自己的电脑,是intel的4G32位win10,换了Intel的8G64位win10,可以烧写并hdmi显示了

      5
    • A

      D1的原理图是不是有问题?
      MR Series • Posted at • andy89926

      0 Votes
      5 Replies
      2274 Views

      mangogeek Replied at

      @andy89926 在 D1的原理图是不是有问题? 中说:

      SBA0和SWE交换

      SBA0和SWE交换参考@Kirin 的回答,应该是芯片内部线序有了改动但原理图库还是旧的。

      5
    • D

      Debian系统文件在哪里
      MR Series • Posted at • dj

      0 Votes
      5 Replies
      1681 Views

      BedRock Replied at

      @dengjijiang 可以的你使用串口连接终端,然后在终端将桌面 restart 试试

      5
    • tigger

      百度TTS语音引擎测试,效果挺不错,感觉大部分播音员被AI取代指日可待。
      其它全志芯片讨论区 • tts baidu • Posted at • tigger

      0 Votes
      5 Replies
      2372 Views

      tigger Replied at

      11305E1F906D8AE1DB7E33096941AAC4.jpg

      刚刚一个朋友给我推荐了 恐龙贝克 的app, 可以调整音色, 阿这 ...

      5
    • cube_work

      我也来试一试编译 A33 android sdk,编译环境Ubuntu18.04,make版本v4.1
      其它全志芯片讨论区 • a33 android • Posted at • cube_work

      0 Votes
      5 Replies
      2582 Views

      K Replied at

      @cube_work
      绝世好文,跟着一步一步果然OK了,这里也学到了一点👏 👏 👏

      1、下载 jdk-6u45-linux-x64.bin,解压到 /usr/java/ 目录这个操作
      需要在把 jdk-6u45-linux-x64.bin 解压到 /usr/java/ 目录之后,在 /usr/java/ 目录下执行

      sudo ./jdk-6u45-linux-x64.bin

      之后在 /usr/java/ 路径下既可看到 jdk-6u45-linux-x64的文件夹,

      2、之后再执行

      export ANDROID_JAVA_HOME="/usr/java/jdk1.6.0_45" export JAVA_HOME="/usr/java/jdk1.6.0_45"

      设置环境变量

      这里再附上下载的jdk-6u45-linux-x64.bin

      5
    • S

      ubuntu环境使用 repo init 命令出错
      代码下载问题专区 • Posted at • songsong

      0 Votes
      5 Replies
      1836 Views

      whycan Replied at

      @songsong 您客气了,有什么问题发帖就可以了,尽力帮忙解决。

      5
    • cube_work

      请问这个懒人创意发牌器是纯机械的, 还是电子+机械的?
      灌水区 • Posted at • cube_work

      0 Votes
      5 Replies
      2040 Views

      cube_work Replied at

      @bedrock 在 请问这个懒人创意发牌器是纯机械的, 还是电子+机械的? 中说:

      @ubuntu 逐渐开始发挥想象力了。。。。那我建议直接 识别加防止出老千(我就是庄家)

      那我只能卖瓜子花生矿泉水了。。。

      5
    • BedRock

      这个雪花灯效果怎么样
      灌水区 • Posted at • BedRock

      0 Votes
      5 Replies
      1552 Views

      O Replied at

      这板子怎么镂的出来呀。

      5
    • aldfaaa

      Tina通过命令行连接WiFi
      MR Series • Posted at • whycan矿工-小叶

      3 Votes
      5 Replies
      3465 Views

      S Replied at

      @yi20416yi log提示你检查驱动,你要先确定内核配置文件里面WiFi相关的驱动和选项都选好了,WiFi驱动也没问题并且编译上了,还有那你设备树sdio引脚和WiFi regon什么的引脚之类的,再或者你WiFi驱动的固件文件是对的,嗯。。很多

      5
    • N

      BUG不想解了,在全志客户服务平台怒充20万块钱,让全志工程师给我捏脚
      其它全志芯片讨论区 • Posted at • nezha

      0 Votes
      5 Replies
      2466 Views

      U Replied at

      谁帮我充支付宝,我可以捏到他破产。

      5
    • X

      Neza-D1开发板学习之红外发送与接收篇
      MR Series • Posted at • xfdr0805

      0 Votes
      5 Replies
      2900 Views

      M Replied at

      2D19A367117644CDA4CB7A5711AC620B.jpg

      所有解码器全勾上了,左边两个可以识别,右边两个欧普照明的遥控器不能识别,这两个好像是带学习功能的,估计是自定义协议了。

      5
    • xiaowenge

      【素材汇总】XR806芯片及开发板图片素材汇总
      公告 • Posted at • DOT小文哥

      0 Votes
      5 Replies
      2396 Views

      q1215200171 Replied at

      XR806kkkkk.png
      XR806详情.docx

      5
    • BedRock

      【模块第三弹】哪吒中的LEDC的驱动
      MR Series • Posted at • BedRock

      0 Votes
      5 Replies
      2798 Views

      H Replied at

      LEDC在一个机型上要真正用起来,的确是个比较吸引视觉的部件,但32还是少了点

      5
    • BedRock

      请教一下大神们,嵌入式中有没有类似游戏机的开源框架
      爱搞机专区 • Posted at • BedRock

      0 Votes
      5 Replies
      2691 Views

      whycan Replied at

      https://steward-fu.github.io/website/handheld.htm
      司徒的教學網站

      5
    • C

      D1 CoreMark运行时报错
      MR Series • Posted at • codwine

      0 Votes
      5 Replies
      2320 Views

      BedRock Replied at

      @codwine 应该是 1.8.5 你看看这个下载下来是不是 riscv64-glibc-gcc-thead_20200702
      gcc 版本为 gcc version 8.1.0 (C-SKY RISCV Tools V1.8.4 B20200702)

      5
    • C

      播放音频会有很响的 “啵” 的一声
      MR Series • Posted at • chenlinfei

      0 Votes
      5 Replies
      2599 Views

      C Replied at

      @whycan

      在初始化的时候开启codec,后面不关,可以避免,估计功耗会高点,另外就是断电这个“啵”还是会有

      diff --git a/sound/soc/sunxi/sun20iw1-codec.c b/sound/soc/sunxi/sun20iw1-codec.c
      index 1dcccdafd..3591e5d17 100644
      --- a/sound/soc/sunxi/sun20iw1-codec.c
      +++ b/sound/soc/sunxi/sun20iw1-codec.c
      @@ -679,8 +679,8 @@ static int sunxi_codec_headphone_event(struct snd_soc_dapm_widget *w,
      (0x1 << HP_DRVEN), (0x1 << HP_DRVEN));
      break;
      case SND_SOC_DAPM_PRE_PMD:

      snd_soc_component_update_bits(component, SUNXI_HP2_REG, (0x1 << HP_DRVEN), (0x0 << HP_DRVEN));

      +// snd_soc_component_update_bits(component, SUNXI_HP2_REG,
      +// (0x1 << HP_DRVEN), (0x0 << HP_DRVEN));
      /* A version of the chip cannot be disable HPLDO and RMC_EN */
      if (sunxi_get_soc_ver() & 0x7) {
      snd_soc_component_update_bits(component, SUNXI_POWER_REG,
      @@ -693,10 +693,10 @@ static int sunxi_codec_headphone_event(struct snd_soc_dapm_widget *w,
      snd_soc_component_update_bits(component, SUNXI_RAMP_REG,
      (0x1 << RMC_EN), (0x1 << RMC_EN));
      }

      snd_soc_component_update_bits(component, SUNXI_HP2_REG, (0x1 << HP_DRVOUTEN), (0x0 << HP_DRVOUTEN)); snd_soc_component_update_bits(component, SUNXI_HP2_REG, (0x1 << RAMP_OUT_EN), (0x0 << RAMP_OUT_EN));

      +// snd_soc_component_update_bits(component, SUNXI_HP2_REG,
      +// (0x1 << HP_DRVOUTEN), (0x0 << HP_DRVOUTEN));
      +// snd_soc_component_update_bits(component, SUNXI_HP2_REG,
      +// (0x1 << RAMP_OUT_EN), (0x0 << RAMP_OUT_EN));
      #ifdef SUNXI_CODEC_DAP_ENABLE
      if (hw_cfg->dacdrc_cfg & DAP_HP_EN)
      dacdrc_enable(component, 0);
      @@ -1261,6 +1261,15 @@ static void sunxi_codec_init(struct snd_soc_component *component)
      if (sunxi_codec->hw_config.dachpf_cfg)
      dachpf_config(component);
      #endif
      +

      snd_soc_component_update_bits(component, SUNXI_HP2_REG, (0x1 << HP_DRVEN), (0x1 << HP_DRVEN)); snd_soc_component_update_bits(component, SUNXI_HP2_REG, (0x1 << HP_DRVOUTEN), (0x1 << HP_DRVOUTEN)); snd_soc_component_update_bits(component, SUNXI_HP2_REG, (0x1 << RAMP_OUT_EN), (0x1 << RAMP_OUT_EN));

      }

      static int sunxi_codec_startup(struct snd_pcm_substream *substream,

      5
    • L

      我的哪吒板子串口经常打印这个奇怪的信息
      MR Series • Posted at • long0304

      0 Votes
      5 Replies
      2201 Views

      whycan Replied at

      @long0304
      问题有点奇怪,能用USB口刷固件吗?

      5
    • q1215200171

      基于星辰处理器的全志XR806鸿蒙开发板上手体验
      Wireless & Analog Series • xr806 鸿蒙 • Posted at • budbool

      0 Votes
      5 Replies
      3022 Views

      Z Replied at

      @xiaowenge 您用什么样IDE ,华为DevEco Device Tool 支持XR806吗?

      5
    • whycan

      全志D1s可以申请样片了,本站网友开源原理图与PCB送三片D1s芯片(不能与其他网友作品雷同),还能送三片液晶显示屏
      MR Series • d1s 液晶 lcd • Posted at • whycan晕哥

      1 Votes
      5 Replies
      3238 Views

      BedRock Replied at

      跟着大佬脚步(复刻)

      5
    • mangogeek

      麻雀播放麻雀
      H/F/TV Series • Posted at • mangogeek

      0 Votes
      5 Replies
      2406 Views

      R Replied at

      @mangogeek 大佬 能给个麻雀调试好麦克和功放的patch吗

      5
    • K

      基于D1开发板的 微信/支付宝 物联网(MQTT)支付平台
      MR Series • 微信支付 支付宝 哪吒 • Posted at • kw___

      2 Votes
      5 Replies
      3361 Views

      tigger Replied at

      有没有哪位大佬玩起来了?

      5
    • Z

      鸿蒙OS下 XR806串口操作
      Wireless & Analog Series • Posted at • zhugx

      1 Votes
      5 Replies
      2809 Views

      S Replied at

      @zhugx 串口2和串口3直接调用接口即可。你是担心配置串口2会影响到串口1吗?不会的,串口之间是相互独立的。

      5
    • whycan

      芒果的D1s麻雀还没出来,我们的 40PIN RGB 转 I80 模块安排上了。
      MR Series • d1s 麻雀 芒果 i80 rgb • Posted at • whycan晕哥

      0 Votes
      5 Replies
      2553 Views

      whycan Replied at

      IMG_20211129_144100.jpg IMG_20211129_144037.jpg

      5
    • M

      V3s 驱动 RTL8723DS 蓝牙,出了这个问题,请问怎么解决呢?
      其它全志芯片讨论区 • rtl8723ds 蓝牙 • Posted at • memory

      0 Votes
      5 Replies
      3386 Views

      M Replied at

      cc6d8f3f-0114-4897-89a4-347eb2e53cbb-5A7DB279591CB0CDF5A4E05C47D06FA4.jpg

      b142582f-46af-4aa4-8a60-a14206e30a8eH)_U92XW8J@4109UD.png

      看我的,V3s 8723DS 跑 a2dp_sink_demo,完全OK

      5
    • q1215200171

      RISC-V SoC + AI | 在全志 D1「哪吒」开发板上,跑个 ncnn 神经网络推理框架的 demo
      MR Series • d1 ncnn • Posted at • budbool

      0 Votes
      5 Replies
      3422 Views

      R Replied at

      mark 一下 大神

      5
    • S

      资源都够用情况下,选V3S还是D1S?
      其它全志芯片讨论区 • Posted at • Vogelweide

      0 Votes
      5 Replies
      2874 Views

      A Replied at

      D1S比V3S开放的资料多吧

      5
    • q1215200171

      【FAQ】全志D1芯片 如何对D1主频进行调节?
      其它全志芯片讨论区 • d1 faq 技术支持 • Posted at • budbool

      3 Votes
      5 Replies
      4125 Views

      xiaowenge Replied at

      @tang123456 在 【FAQ】全志D1芯片 如何对D1主频进行调节? 中说:

      @sunmin 兄弟你找到cpufreq了吗,我也遇到一样的问题了

      内核配置make ARCH=riscv menuconfig里的频率条件节点选上了吗?固件重新烧了吗?确认烧进去了吗?

      5
    • L

      请提供HDMI与MIPI同时显示输出的源代码,谢谢!
      MR Series • Posted at • 永远有多远

      0 Votes
      5 Replies
      2308 Views

      WhycanService Replied at

      @heihei123 调用libuapi,开两个屏就行

      5
    • M

      D1s的芯片手册
      MR Series • Posted at • mycmos

      0 Votes
      5 Replies
      2687 Views

      Z Replied at

      @amturing 在 D1s的芯片手册 中说:

      希望能帮到你
      F133_User_Manual_V1.0.pdf
      F133_Datasheet_V1.0_whycan.pdf

      请问这个f133的手册也能用于D1么?

      5
    • C

      XR806板子异常崩溃,无法重新下载固件的问题
      Wireless & Analog Series • Posted at • cszzlsw

      0 Votes
      5 Replies
      2500 Views

      iysheng Replied at

      @cszzlsw 估计是下载的系统有问题了,换了 windows7 莫名其妙 就好了。Image 1.png

      5
    • M

      XR806桌面备忘录/天气预报/相册项目开题报告
      Wireless & Analog Series • Posted at • mysteryli

      1 Votes
      5 Replies
      2309 Views

      H Replied at

      @mysteryli 😧 我忘记了我有装2.x

      5
    • nawgnehz

      [同济课堂问题]编译ncnn时产生cmake报错
      MR Series • Posted at • Wine

      0 Votes
      5 Replies
      2576 Views

      H Replied at

      @nawgnehz 您好,我也遇到了和您相同的问题,请问您后来是怎么解决的呢。

      5
    • L

      XR806是否可用类似SDIO接口与CPU连接,并作为Linux的一个外设网卡设备?
      Wireless & Analog Series • Posted at • langsir

      0 Votes
      5 Replies
      2143 Views

      tigger Replied at

      @langsir
      那用SPI吧

      5
    • R

      D1s的SPI1通信卡死问题
      MR Series • Posted at • ricky

      0 Votes
      5 Replies
      2505 Views

      Q Replied at

      请大佬及时分享解决问题的经验,小弟感激不尽

      5
    • R

      D1s全志公版uart驱动是否支持485?
      MR Series • Posted at • ricky

      0 Votes
      5 Replies
      2619 Views

      Q Replied at

      建议不要使用公版485驱动,貌似我有遇到过问题,问题就是拉发送引脚的前 数据已经发了,那不完犊子了

      5
    • M

      请问怎么让D1的Linux log 显示 CST 时间呢?而不是UTC时间。
      MR Series • Posted at • memory

      0 Votes
      5 Replies
      2151 Views

      S Replied at

      改成这样 TIMESTAMP=TZ=UTC-8 date +"%Y-%m-%d %H:%M:%S" 搞定:

      $ repo diff lichee/linux-5.4/scripts/mkcompile_h project lichee/linux-5.4/ diff --git a/scripts/mkcompile_h b/scripts/mkcompile_h index 4578e413b..f861eed94 100755 --- a/scripts/mkcompile_h +++ b/scripts/mkcompile_h @@ -36,7 +36,7 @@ else fi if [ -z "$KBUILD_BUILD_TIMESTAMP" ]; then - TIMESTAMP=`date` + TIMESTAMP=`TZ=UTC-8 date +"%Y-%m-%d %H:%M:%S"` else TIMESTAMP=$KBUILD_BUILD_TIMESTAMP fi

      正常了:

      root@TinaLinux:/# root@TinaLinux:/# cat /proc/version Linux version 5.4.61 (smartcar@ubuntu) (riscv64-unknown-linux-gnu-gcc (C-SKY RISCV Tools V1.8.4 B20200702) 8.1.0, GNU ld (GNU Binutils) 2.32) #3 PREEMPT 2022-03-10 10:50:30 root@TinaLinux:/#
      5
    • U

      a133安装lxde桌面,桌面怎么是这样的
      其它全志芯片讨论区 • Posted at • ulichi

      0 Votes
      5 Replies
      2499 Views

      X Replied at

      @ulichi 在 a133安装lxde桌面,桌面怎么是这样的 中说:

      fb颜色格式

      FB颜色格式如何修改?

      5
    • D

      D1 uart2 PD1&PD2引脚电平有脉冲,求解?
      MR Series • Posted at • dianjixz

      0 Votes
      5 Replies
      2643 Views

      whycan Replied at

      @suitjune
      检查 .sunxi.dts 这个最终生成的设备树文件。

      5
    • M

      D1 哪吒解码视频文件测试
      MR Series • 视频解码 哪吒 d1 • Posted at • memory

      1 Votes
      5 Replies
      3273 Views

      W Replied at

      请问如何编译decodertest呢?

      make menuconfig *** <*>decodertest

      执行编译
      后报错

      decodertest.c:13:21: fatal error: cdx_log.h: No such file or directory #include <cdx_log.h> ^ compilation terminated. make[3]: *** [decodertest.o] Error 1
      5
    • M

      关于CE模块AES算法key的问题
      A Series • Posted at • mengxp

      0 Votes
      5 Replies
      2459 Views

      M Replied at

      问题解决了。

      我今天看到了 v833 的 Tina_Linux_Secure_Development_Guide.pdf 文档,里面有 TA 使用 SSK 加密的案例,查看了tina相关的代码,有一个sign.py,看了下,确认了加密引擎确实是使用原始SSK加密的,没有做什么黑盒变换。

      那特么为什么我自己写的bootloader在调用CE使用ssk加密的结果异常呢?

      想来optee肯定有相关的接口,找了下也就是
      #define TEESMC_SSK_ENCRYPT 0
      #define TEESMC_SSK_DECRYPT 3

      由于optee是闭源的,只能拿IDA逆了一下看他是怎么做的。
      发现了一个奇怪的事情,既然CE是使用SSK作为key,那代码里为什么要申请一个 256 字节的keyBuf呢?

      然后我试着在我的bootloader里面,给 task desc 的 key 指向了一个 256 字节的缓冲,果然OK了!!!

      5
    • M

      请问 F1C200s 可以同时输出到LCD 和 TV 上吗?
      其它全志芯片讨论区 • tv f1c200s • Posted at • memory

      0 Votes
      5 Replies
      2297 Views

      YuzukiTsuru Replied at

      @tigger 可以

      5
    • T

      既然D1/D1S的LVGL8有G2D和双缓 那么LVGL7也值得拥有
      MR Series • Posted at • TEVET

      0 Votes
      5 Replies
      3588 Views

      T Replied at

      @yelong98 回大佬
      为了摆脱TINA-BSP的磁盘噩梦能舒服地只编译LVGL8在D1S/D1上面肆意玩耍
      https://bbs.aw-ol.com/topic/1084/share/1
      这里已经搞好放上来了,就改改Makefile 就行了,可以脱离bsp编译

      5
    • M

      小淘气 F1C100s /F1C200s 开发板
      其它全志芯片讨论区 • 小淘气 f1c100s f1c200s 开发板 cvbs • Posted at • memory

      0 Votes
      5 Replies
      2411 Views

      M Replied at

      cc630102-263c-4fba-9a6a-c334e7cd0e35-CFB6B9FC861A51A577FD85449B4D3527.jpg

      再来试一试 TV OUT,正常。

      5
    • C

      tplayer是否会支持同时播放3个视频
      MR Series • Posted at • chenlinfei

      0 Votes
      5 Replies
      2567 Views

      C Replied at

      试了下最新的V2.0代码,支持多个视频,但是跑3个视频跑不起来。

      5
    • tigger

      飞凌T507开发板实现SPI转CAN 全过程
      飞凌嵌入式专区 • Posted at • tigger

      1 Votes
      5 Replies
      2998 Views

      T Replied at

      @uuuuid HI, 这个方案稳定么?我跑一段时间canopen协议就挂掉了

      5
    • H

      有没有哪位大神在D1S上跑过ov5640或者其他sensor的,走DVP-CSI
      MR Series • Posted at • Honey130602

      2 Votes
      5 Replies
      3226 Views

      S Replied at

      解决了,是因为没走I2C。需要在kernel_menuconfig里把sunxi platform devices下将select cci or cci to twi选项换为twi。

      5
    • J

      哪吒D1 wifi无法使用
      MR Series • Posted at • junchao82

      0 Votes
      5 Replies
      2943 Views

      H Replied at

      参考安装网址:https://d1.docs.aw-ol.com/d1_dev/
      安装的是:Debian by Sipeed

      出现完全一样的wlan无法驱动问题

      5
    • M

      请问T113S3到底有没有CAN总线?有的话,是那些引脚?
      MR Series • Posted at • M68000

      0 Votes
      5 Replies
      2411 Views

      BedRock Replied at

      英特尔:付费解锁

      5
    • q1215200171

      华清远见推出基于全志D1-H的嵌入式RISC-V实验箱
      MR Series • Posted at • budbool

      1 Votes
      5 Replies
      3010 Views

      B Replied at

      @xiaowenge 面对高校会限制发展的,生态很难做起来的

      5
    • YuzukiTsuru

      【硬核干货】D1-H / D1 与D1s 比较图 ,一眼看出区别
      MR Series • Posted at • 柚木 鉉

      2 Votes
      5 Replies
      5136 Views

      P Replied at

      @yuzukitsuru 有没有EMMC的参考设计呀

      5
    • Z

      A33 uboot在线仿真环境搭建
      编译和烧写问题专区 • Posted at • zjbxzf

      0 Votes
      5 Replies
      2130 Views

      Z Replied at

      @zjbxzf 问题解决用KGDB就行

      5
    • xiaowenge

      D1s有芯片了兄弟们!开源方案设计送芯片啦
      MR Series • Posted at • DOT小文哥

      2 Votes
      5 Replies
      1880 Views

      xiaowenge Replied at

      又给小伙伴们寄出了10片,数量不多了,还有人要的吗?
      109c1b64-4888-441f-a33c-864576c78df6-image.png

      5
    • D

      麻雀D1s ,编译了新的Tina_d1_open_v2,选择了D1S,用TF卡烧录,启动时候卡住了,挂载不了文件系统,各位大神帮忙看下
      MR Series • Posted at • daMing123

      0 Votes
      5 Replies
      3034 Views

      D Replied at

      @yuzukitsuru 试试,我已经解决了,在board.dts中,有个引脚占用了,我修改了下,就行了。

      5
    • L

      r818平台下 android sdk 烧录问题
      编译和烧写问题专区 • Posted at • leijianbin1988

      0 Votes
      5 Replies
      2075 Views

      xiaowenge Replied at

      @yuzukitsuru 在 r818平台下 android sdk 烧录问题 中说:

      @whycan ???还可以这样

      原来你们都不知道。。。

      5
    • mangogeek

      MQ-Pro默认是带彩排的
      MR Series • Posted at • mangogeek

      0 Votes
      5 Replies
      1986 Views

      A Replied at

      @xiaowenge 看见了,已下单😁

      5
    • YuzukiTsuru

      XR32 CSI验证发现有点问题,求大佬给个OV7670、GC0308 的demo我抄抄
      Wireless & Analog Series • Posted at • 柚木 鉉

      0 Votes
      5 Replies
      2376 Views

      G Replied at

      @yuzukitsuru 我也Layout一个试试

      5
    • X

      d1 mipi接口电平疑问
      MR Series • Posted at • xiaoxiao

      0 Votes
      5 Replies
      1944 Views

      X Replied at

      @yuzukitsuru 👍 谢谢

      5

    精华推荐

    • 【水经验混下载权限专用贴】如何升级LV2拉取SDK
    • T113/D1-H (MQ-Pro)驱动 OV5640 摄像头(内含驱动源码)
    • 全志在线开源芯片 新 SDK 平台下载方法汇总
    • 新 SDK 平台下载 D1-H/D1s SDK
    • 新 SDK 平台下载 V853 SDK
    • 新 SDK 平台下载 R329 SDK
    • 新 SDK 平台下载 MR813 SDK
    • 新 SDK 平台下载 XR806 SDK
    • D1s 哪吒开发板,电阻屏的配置方法
    • V85x E907 小核开发与使用
    • [哪吒开发板]Tina Linux SPI主从通信验证实录
    • T113-S3入门资料汇总(避坑指南)一
    • 【加精】D1 tina Docker 编译环境制作和使用
    • Tina Linux 存储介质切换:eMMC,SPI NAND,SPI NOR,SD Card,SD NAND
    • 【资料】V853&&V851 硬件参考设计
    换一批

    随便看看

    • 新手第一次调试TINA的mipi-dsi 遇到一些问题,恳请大佬们有空指导!万分感谢
    • T113 报错end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
    • 有d1s的开发环境,怎么升到t133-s3开发环境
    • 急需开发小程序
    • Tina Linux安装
    • 修改D1s的串口控制台,成功了但没完全成功,只能输出,不能输入,请教原因。(转)
    • 录制视频文件,断电后文件大小变为0KB
    • R818模组的底板,也相当于是小pad前身
    • D1哪吒开发板上运行Debian桌面系统
    • XR806的WIFI发射功率可以修改吗
    • 也来驱动8080屏
    • H616这个脚本好像可以用来只更新u-boot
    • t113-s3 eMMc问题
    • mkimage: Exec format error
    • T5编码H264接口报错
    • 1
    • 2
    • 8
    • 9
    • 10
    • 11
    • 12
    • 60
    • 61
    • 10 / 61

    精华推荐

    • 【水经验混下载权限专用贴】如何升级LV2拉取SDK
    • T113/D1-H (MQ-Pro)驱动 OV5640 摄像头(内含驱动源码)
    • 全志在线开源芯片 新 SDK 平台下载方法汇总
    • 新 SDK 平台下载 D1-H/D1s SDK
    • 新 SDK 平台下载 V853 SDK
    • 新 SDK 平台下载 R329 SDK
    • 新 SDK 平台下载 MR813 SDK
    • 新 SDK 平台下载 XR806 SDK
    • D1s 哪吒开发板,电阻屏的配置方法
    • V85x E907 小核开发与使用
    • [哪吒开发板]Tina Linux SPI主从通信验证实录
    • T113-S3入门资料汇总(避坑指南)一
    • 【加精】D1 tina Docker 编译环境制作和使用
    • Tina Linux 存储介质切换:eMMC,SPI NAND,SPI NOR,SD Card,SD NAND
    • 【资料】V853&&V851 硬件参考设计
    换一批

    随便看看

    • 新手第一次调试TINA的mipi-dsi 遇到一些问题,恳请大佬们有空指导!万分感谢
    • T113 报错end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
    • 有d1s的开发环境,怎么升到t133-s3开发环境
    • 急需开发小程序
    • Tina Linux安装
    • 修改D1s的串口控制台,成功了但没完全成功,只能输出,不能输入,请教原因。(转)
    • 录制视频文件,断电后文件大小变为0KB
    • R818模组的底板,也相当于是小pad前身
    • D1哪吒开发板上运行Debian桌面系统
    • XR806的WIFI发射功率可以修改吗
    • 也来驱动8080屏
    • H616这个脚本好像可以用来只更新u-boot
    • t113-s3 eMMc问题
    • mkimage: Exec format error
    • T5编码H264接口报错