@misay https://github.com/YuzukiHD/Yuzukilizard/tree/master/Software/sunxi-mpp/sample/sample_smartIPC_demo

参考这个

@liuxingkeji
可以先在淘宝找到这个板子的驱动板，先接电脑试一试，

数据线再去怼A133，这样可以先排除电源问题。

@whycanservice 重新编译img之后解决了，谢谢！

@lingzhi12321 明白了，谢谢大佬

2e2b57a6-f8a0-40bf-8838-329d9bd8a6d4-image.png 新建文本文档 (9).txt
大佬，我照你的步骤来出现了这样的问题，一跑cedar_test就崩溃，这到底是怎么回事，是因为内存问题吗？

@luka_lee
确认 .h 里面开启了 jpeg 支持吗？

同样遇到了caa5b9ee-f63a-40ca-bef4-31c15feaaeb8-image.png

AAC解码器是闭源的，怎么传递参数进去呢？

@flyn_aw 我的解决了，rst接了电子到gnd，电压信号过低，去掉就可以了

@whycanservice 有个问题SD card 0是sd卡，SD card 1是emmc，SD card 2是spi flash，这个顺序对么

@ah669741
感谢分享宝贵踩坑经验。👍

@xiaofangzi
cifs ?

@shz18877605430

一定要勾选H5协议:

2f59f2d0-4e44-4ba0-8d15-4f59681e51a9-b6db94f5ff75d6db510ebf3c0079167.png

4109bef7-ab4c-429f-9975-da53e55893a7-70f9c9757fde601f4c64962f574b834.jpg

同问，是否要修改设备树信息，麻烦提供个思路

@q1215200171 大佬，你的攻略全面了，解决了，谢谢！

CMA占用了8M，Kernel也占用了一些

buildroot文件系统架构特性。

1、如何修改提示语和账号密码，找到buildroot配置属性BR2_TARGET_GENERIC_HOSTNAME、BR2_TARGET_GENERIC_ISSUE、BR2_TARGET_GENERIC_ROOT_PASSWD修改，如下：

BR2_TARGET_GENERIC_ROOT_PASSWD=“”

2、如何取消账号登入，在/etc/inittab中添加::respawn:-/bin/sh,去掉ttyAS0::respawn:/sbin/getty -L ttyAS0 115200 vt100 # GENERIC_SERIAL，反之亦然

3、如果要修改源码，查看文件系统inittab生成，添加修改就可以。

原神：全低画质 15~40 帧

d96e0fc2-cb41-452b-813b-96057d0a07f6-Screenshot_20230712-132455.png

1c43a525-345a-402b-b971-6bdb67e8ef82-Screenshot_20230712-132515.png

Applications Graphics Acceleration Info: Uptime: 13155175 Realtime: 13155175 ** Graphics info for pid 18983 [com.miHoYo.Yuanshen] ** Stats since: 6718860763285ns Total frames rendered: 104 Janky frames: 28 (26.92%) Janky frames (legacy): 23 (22.12%) 50th percentile: 9ms 90th percentile: 25ms 95th percentile: 44ms 99th percentile: 150ms Number Missed Vsync: 4 Number High input latency: 22 Number Slow UI thread: 5 Number Slow bitmap uploads: 0 Number Slow issue draw commands: 25 Number Frame deadline missed: 28 Number Frame deadline missed (legacy): 8 HISTOGRAM: 5ms=11 6ms=15 7ms=19 8ms=6 9ms=6 10ms=4 11ms=10 12ms=2 13ms=1 14ms=1 15ms=0 16ms=1 17ms=1 18ms=0 19ms=0 20ms=0 21ms=1 22ms=4 23ms=6 24ms=5 25ms=2 26ms=1 27ms=2 28ms=0 29ms=0 30ms=0 31ms=0 32ms=0 34ms=0 36ms=0 38ms=0 40ms=0 42ms=0 44ms=1 46ms=0 48ms=1 53ms=1 57ms=0 61ms=0 65ms=1 69ms=0 73ms=0 77ms=0 81ms=0 85ms=0 89ms=0 93ms=0 97ms=0 101ms=0 105ms=0 109ms=0 113ms=0 117ms=0 121ms=0 125ms=0 129ms=0 133ms=0 150ms=2 200ms=0 250ms=0 300ms=0 350ms=0 400ms=0 450ms=0 500ms=0 550ms=0 600ms=0 650ms=0 700ms=0 750ms=0 800ms=0 850ms=0 900ms=0 950ms=0 1000ms=0 1050ms=0 1100ms=0 1150ms=0 1200ms=0 1250ms=0 1300ms=0 1350ms=0 1400ms=0 1450ms=0 1500ms=0 1550ms=0 1600ms=0 1650ms=0 1700ms=0 1750ms=0 1800ms=0 1850ms=0 1900ms=0 1950ms=0 2000ms=0 2050ms=0 2100ms=0 2150ms=0 2200ms=0 2250ms=0 2300ms=0 2350ms=0 2400ms=0 2450ms=0 2500ms=0 2550ms=0 2600ms=0 2650ms=0 2700ms=0 2750ms=0 2800ms=0 2850ms=0 2900ms=0 2950ms=0 3000ms=0 3050ms=0 3100ms=0 3150ms=0 3200ms=0 3250ms=0 3300ms=0 3350ms=0 3400ms=0 3450ms=0 3500ms=0 3550ms=0 3600ms=0 3650ms=0 3700ms=0 3750ms=0 3800ms=0 3850ms=0 3900ms=0 3950ms=0 4000ms=0 4050ms=0 4100ms=0 4150ms=0 4200ms=0 4250ms=0 4300ms=0 4350ms=0 4400ms=0 4450ms=0 4500ms=0 4550ms=0 4600ms=0 4650ms=0 4700ms=0 4750ms=0 4800ms=0 4850ms=0 4900ms=0 4950ms=0 50th gpu percentile: 3ms 90th gpu percentile: 8ms 95th gpu percentile: 9ms 99th gpu percentile: 10ms GPU HISTOGRAM: 1ms=4 2ms=35 3ms=31 4ms=7 5ms=4 6ms=2 7ms=6 8ms=6 9ms=5 10ms=3 11ms=1 12ms=0 13ms=0 14ms=0 15ms=0 16ms=0 17ms=0 18ms=0 19ms=0 20ms=0 21ms=0 22ms=0 23ms=0 24ms=0 25ms=0 4950ms=0 Pipeline=Skia (OpenGL) CPU Caches: Glyph Cache: 69.44 KB (1 entry) Glyph Count: 26 Total CPU memory usage: 71103 bytes, 69.44 KB (0.00 bytes is purgeable) GPU Caches: Other: Other: 0.00 bytes (1 entry) Image: Texture: 127.59 KB (10 entries) Scratch: Buffer Object: 78.00 KB (2 entries) Texture: 2.00 MB (1 entry) Total GPU memory usage: 2307680 bytes, 2.20 MB (127.59 KB is purgeable) Profile data in ms: com.miHoYo.Yuanshen/com.miHoYo.GetMobileInfo.MainActivity/android.view.ViewRootImpl@a46020a (visibility=0) View hierarchy: com.miHoYo.Yuanshen/com.miHoYo.GetMobileInfo.MainActivity/android.view.ViewRootImpl@a46020a 7 views, 8.70 kB of render nodes Total ViewRootImpl : 1 Total attached Views : 7 Total RenderNode : 8.70 kB (used) / 8.70 kB (capacity)

@whycan 请问一下，这里能查看到的驱动只有一个.o文件和一个.S文件，这个文件是全志自己写的然后编译出来的，还是ddr厂商提供的，内部处理不需要自己管，只需要把这个添加到spl里面就好了

@qinhao4832 在 T113 TF卡启动，上电没反应，需要按复位键，才能启动。 中说：

[ 0.945472] VFS: Cannot open root device "mmcblk0p5" or unknown-block(0,0): error -6

没有生成卡分区

@songguojian 在 T1113-s3烧录55%还是失败 中说：

[06.719]ubi0: good PEBs: 490, bad PEBs: 2, corrupted PEBs: 0

不知道是不是这里问题，换个flash试一试。

遇到同样的问题，请问是如何解决的？谢谢

@memory 在 Android10 制作完全Root版本，A133平台验证通过 中说：

// 添加下面代码至212行处，注意标点符号不要漏掉
{ 06755, AID_ROOT, AID_ROOT, 0, "system/bin/su" }

这里有个小坑，A133 Android10 SDK不要另外添加，找到这行修改即可！

@leefei https://github.com/bigtreetech/CB1-Kernel/blob/kernel-5.16/kernel/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi

@lilazhou 考虑CPU调度问题，Kernel可能调度到其他事项了，需要高速处理建议使用RTOS等开销较小的系统

没什么区别，直接主线6.1了

@hfy1999929 我没有自己复制，直接用的大佬最新的镜像烧录

@whycan 别的总线上block read也都不可以

@atms2013 设备树，lcd部分

@whycanservice 您好，请问[ 1.349938] sunxipart: failed to parse sunxi_gpt!这个是没有手动选择nor flash的原因吗？

@ubuntu 是的。video模式下，屏幕的时序（比如消隐时间）设置不正确也会有残影现象。这时就需要联系屏幕厂家给出优化后的时序了。这里说的不正确不是说画面无法显示，而是画面可以显示，但是有残影等瑕疵

@j_biao 在 V583 USB摄像头编码问题 中说：

@xiaowenge 是的，打错了，好的谢谢

已修改

@awwwwa 感谢大佬的回复，我通过分析 build/pack 使用 ./build.sh packraw
找到了下面那个最终生成的命令
c19acd14-595f-406c-9374-4dba960b0427-image.png

fded34af-2f9f-46d8-8648-5b2d5a9d9b93-image.png
然后把 programmer_img 丢进 buildroot 打包目录，直接编译打包，生成的镜像就可以直接用啦！
bb1056bc-0d52-41b5-bb02-b1c10b7e6b3b-image.png

sunxi_gpt这个我学习一下 怎么融进去 让他自己转换打包。

不得不说，这个 programmer_img 很强大，但是里面怎么实现的我很好奇，当时修改了各种 genimage.cfg的分区类型和头部都不行。

@vincent1 在 V853适配FFMPEG网络推流的摄像头有推荐吗？ 中说：

@mysteryli eye-mpp这个包是要做什么才能获取的吗？我的sdk里面是没有eye-mpp这个包得

不会的，官网下的都有的啊

@dingdong AIC600E3 is a different chip with t113-s4

@awwwwa 嗯！ 貌似console的映射问题导致的。还在查找原因中

@awwwwa 刚测试，重载 img, 就可以了

@geniusz 自带的uboot的bootm命令会自动解压，主线的需要自行配置

@gb2047 全志目前应该还没有带xspi控制器的芯片，因此可能没有这种开发板，毕竟xspi协议比较新。

@awwwwa 真的可以不用ISP就取出CSI的数据？？

@sunxi 你好，请问是怎么解决的，方便分享一下吗

mark 一下。

是否是两个屏幕，分别用独立的 LCD 控制器驱动？

@ddrddr 可能你的framebuffer支持alpha通道，但是填充图像数据的时候没有填写相应alpha数值。检查一下framebuffer格式即可。

010c5b72-14c9-4ac4-9a7a-c6f249e65f43-ca4abf1ffb0fdefea41b44cefe3ab64.jpg

f0c29727-8ed1-409e-b684-86b35a27864f-ce55d5f8ee2d1c7d40362932097efd8.jpg

EC200U-CN 集成GNSS的4G模块。

@vincent1 哈喽哈喽，请问你做网络推流实现了嘛

是否可以创建一路VirChn，同时绑定三路编码(MP4+jpeg+rtsp)，然后在VI上叠Qt的OSD？是OSD效率高，还是采用非绑定模式，先GetCSIFrame后做G2D处理，再send到三路编码的效率高？

@huangyuhan
systemctl不工作

@xzj578029515 遇到同样的问题 请问是怎么适配的

@haaland 不可以，twi是开漏输出内部上拉拉不动的。
硬件spi发送初始化会出现超频问题，st7701s的spi通讯速率200K，硬件spi整个1M上去他就不认了

文档教程： https://aw-r128.100ask.net/zh/rtos/demo/part2/chapter1.html

@lynnl4 1920 1088

@asoul_ava 当然，这个＋10还是+多少还得看自己板子的文件

@livpo 在 v3s串口连接传感器，读取传感器数据时候出错 中说：

能不能打开并通讯，如果可以，说明v3s这个串口驱动有问题

串口直接这样读取，不会存在读取数据不完整，应该有一个中断接收完成的函数把

@liangzhicheng 请问如何配置内核才能打开DRM

@al_lpf 在 R128 datasheet 和 应用手册 哪里可以下载 中说：

@xiaowenge 在 R128 datasheet 和 应用手册 哪里可以下载 中说：

open.allwinnertech.com

这个必须要是公司才能用吗？个人没得看？

是，个人的暂时还没开放

@ejuoy lv2了，下载最新sdk试试

That's cool!

@guoyao 必须是python3.6版本以上

@xjy_5 在 再见了各位！ 中说：

@xiaowenge 那是，性价比这块全志芯片还不错的，如果能自己搞定软件的话... 确实难就难在这，我这里东西都做得差不多了，只是老板想叫我去做bios编程的工作内容，我不同意，试用期也就这样了。

👏 👏 👏 👏 👏

@sunxi uboot和内核目录的config文件中

@xiaowenge 非常感谢，马上试试

@whycanservice2 没有配置呢。还是用的SDK的环境。不过客服给的SDK貌似点不亮2.4的SPI屏。还有纠结中。

@slamdunk31598 LinuxSDK-v1.2验证过是OK的，并未复现您所说的问题。

@awwwwa does anyone have a schematic of this? my question is 3v3 or 1v8 oscillator. I guessed 1v8 since VCC-PLL is 1v8. anyone know for sure? anyone doing this in a production unit. trying to avoid simple crystal capacitance matching etc. prefer using oscillators.

-Ed

已解决：
此处报错可以忽略，后面编译出错参考：https://bbs.aw-ol.com/topic/4661/r128编译rtos失败

@missdangerous

修改CPU频率是在设备树里面修改，同时需要适配cpufreq驱动 文档是2.0版本，请联系代理或FAE获取新版本

@liuruyi 在 阿里云debian系统不支持riscv64 中说：

@xiaowenge debian是有riscv的支持了，我上面参考那个帖子他们这样是能这样用apt下程序

soga，那应该是别的原因，可以再查一下

@mrzhang 安全中心里 把内存隔离关了

查看了《User_Manual》，大概可以在驱动源码里去配置CER和CCR寄存器，打开这个capture捕获功能，配置输入捕获模式
effb552d-51e0-4713-a12f-463261c55946-image.png

读这几个寄存器的值，默认都是0x0，即disabled，默认是没有输入捕获功能的。手册中也没有介绍要如何在设备树中配置，最好还是在驱动源码中手动使能。
9c376ce0-fab3-4c7d-8086-2beac222ce11-image.png
d12dbf50-d8ea-415f-99a3-3dc3cbc218ec-image.png
fd740dd9-4a60-488f-aecc-4b21c5df14ed-image.png

@alvinlbl 这个pmu指的是外置的电池管理pmu，内置的pmu不会使用twi控制输出。

https://r128.docs.aw-ol.com/peripheral/pmu/

感谢帮助，问题已解决

@ckx2022 也就是说要把S模式的程序搞崩溃，才会会到机器模式

学习到了，谢谢大佬

A523_Brief_V1.1.pdf

T527_Brief_V0.11_Draft_Version.pdf

@bsplayer 好赞

@yi20416yi 有没有一种可能，你的手机热点是5G WIFI ， 但是你的机器是 2.4G 的

@zt940508 @zt940508 看起来可以。直接把对应指令机器码放进去。

@frank 这改完 lcd0 不能用了啊

@mc964203886 一般使用Ubuntu 16.04就可以

@cai_yp openSUSE 需要装虚拟机使用

@awwwwa
是不是没有使用外部 L2C，lockdown 由 CP15 控制？如果是的话，在哪里有说明呢。
arm 参考手册上说这个是 implementation spec

这是 ISP 疯狂的一瞥，这是我首先调用camerademo，然后调用sample_uvcout的时候
Screencast from 08-01-2024 22:53:55.webm

@lansecd 1704442509797.png 我用的UART0做调试串口我看资料好像是这样，是还有其他地方没有配置到位吗？

@c305139261 请问怎么进入这个烧录模式

@null037 新手小白，请问t113-s3怎么编译出.ko模块，在板子上找不到呢

@mysteryli 你好，你是怎么生成fb0的啊？方便说一下吗？

@liuqiang 关闭readonly 是在Enable UBI下面

@aaabbb222 实际情况是小客户得不到资料不用，大客户有能力自己设计板子，用不上核心板

@yubeer 你好 请问你的这个问题解决了吗？

@xiaowenge 设备树可以配置默认的背光亮度

@leomini5 VE是编解码器

@chen0505 PA引导是BROM不支持，BROM是固化在芯片里的，如果需要修改需要改版芯片

Note Description D/S Datasheet Support but no sample test S/T Support and sample test √ Support and mass produce X Not support (Blank) Can support but not support now Part Number Capacity JEDEC ID PACKAGE R128 Support Status MT29F2G01ABAGDSF-AAT(NW794) 256M 0x2C, 0x24 SOP-16 D/S MT29F1G01ABAFDSF-AAT(NW808) 128M 0x2C, 0x14 SOP-16 D/S MT29F2G01ABAGDWB 256M 0x2C,0x24 SOP-16 D/S W25N01GVZEIG 128M 0xEF 0xAA 0x21 D/S W25N02KVZEIR 256M 0xEF 0xAA 0x22 MX35LF2GE4AB 256M 0xC2 0x22 16-SOP MX35LF1GE4AB 128M 0xC2 0x12 8-WSON √ MX35LF2GE4AD 256M 0xC2 0x26 0x03 8-WSON D/S MX35LF1G24AD 128M 0xC2 0x14 MX35LF4GE4AD 512M GD5F1GQ4UBYIGR 128M 0xC8 0xD1 8-pad 8X6 WSON D/S GD5F2GQ4UB9IGR 256M 0xC8 0xD2 8-pad 8X6 WSON D/S GD5F1GQ4UCYIG 128M 0xC8 0xB1 0x48 WSON8(8x6mm) D/S GD5F1GQ5UEYIG 128M 0xC8 0x51 D/S GD5F2GQ5UEYIGR 256M 0xC8 0x52 GD5F4GQ6UEYIG 512M 0xC8 0x55 F50L1G41LB(2M) -> F50L1G41LB-104YG2M F50L1G41LB-104YG2ME 128M 0xC8 0x01 0x7F 0x7F 0x7F 8-WSON D/S F50L2G41XA 256M 0x2C, 0x24 DS35Q1GA-1B 128M 0xE5 0x71 8-WSON D/S DS35Q2GA-IB 256M 0xE5 0x72 DS35Q2GBXXX 256M 0xE5 0xf2 DS35Q4GMXXX 512M 0xE5 0xf4 DS35X1GBXXX 1G 0xE5 0xF1 8-WSON TC58CVG2S0H 512M 0x98 0xCD TC58CVG0S3HRAIG 128M 0x98 0xC2 8-WSON D/S FS35ND01G-S1F1QWFI 128M 0xCD 0xB1 WSON8(8x6mm) D/S FS35ND01G-S1Y2 128M 0xCD 0xEA WSON8 F35SQA001G 128M 0xCD 0x71 WSON8 √ F35SQA002G 256M 0xCD 0x72 EM73C044VCD-H 128M 0xD5 0x1C 8-WSON EM73E044SNA 128M 0xD5 0x03 8-WSON ZD35Q1GA-IBR 128M 0xba 0x71 8-WSON D/S PN26G01AWSIUG 128M 0xa1, 0xe1 WSON8(8x6mm) XT26G01A 128M 0x0b,0xe1 D/S XT26G02A 256M 0x0b,0xe2 XT26G04A 512M 0x0b,0xe3 WSON8(8x6mm) XT26G01CWSIG 128M 0x0b,0x11 D/S XT26G02CWSIG 256M 0x0b,0x12 XT26G04CWSIG 512M 0x0b,0x13 XT26G02ELGIGA 256M 0x2c, 0x24 FM25S01 128M 0xa1,0xa1 WSON8(8x6mm) FM25S01A 128M 0xa1,0xe4 FM25S02A 256M 0xa1,0xe5 SCN00SA3W1AI8A 128M 0xC8 0x21 8-WSON S35ML01G3 128M 0x01 0x15 S35ML02G300WH100 256M 0x01 0x25 S35ML04G3 512M 0x01 0x35 HYF1GQ4UDACAE 128M 0xC9 0x21

@guyuandongfang
我也遇到过类似的情况。 看题目 «V853 SDK：Linux内核中的MIPI DSI «

@fleieng 你用的不是PMIC？独立的DcDC那

@awwwwa 该问题已解决，但是有新的问题
b39e16d8-fbb8-4171-9bd5-ecd04d6b4216-047b929afa3b8f2b370ee53b0aa032e.jpg
这个色彩是黑白色，换过多个摄像头，都是黑白色

@pointzero36 这个错误应该是 ISP 信息获取失败了

THIS IS MY .CONF FILE ########### paramter (ref to tulip_cedarx.conf)############ [parameter] rtsp_net_type = 1 #RTSP Network type, 0: "lo", 1: "eth0", 2: "br0", 3: "wlan0" stream_buf_size = 0 #0:default 1/10*yuv420, unit:bytes test_duration = 0 #unit:s, 0:Infinite duration. main_isp = 0 main_vipp = 0 main_src_width = 1920 main_src_height = 1080 main_pixel_format = "aw_lbc_2_0x" #nv21,nv12,yu12,yv12;aw_lbc_2_5x,aw_lbc_2_0x,aw_lbc_1_5x,aw_lbc_1_0x main_wdr_enable = 0 main_vi_buf_num = 3 main_src_frame_rate = 20 #fps main_viChn = 0 #-1:disale main stream main_venc_chn = 0 #-1:disale main stream main_encode_type = "H.265" main_encode_width = 2304 #1280x720->720p, 1920x1080->1080p, 2304x1296->3M, 2560×1440->2k, 3840x2160->4k, 7680x4320->8k main_encode_height = 1296 main_encode_frame_rate = 20 #fps main_encode_bitrate = 1572864 #5M:5242880, 2M:2097152, 1.5M:1572864, 1M:1048576 main_file_path = #"/mnt/extsd/mainStream.raw" #if no path is specified, it will not be saved. main_online_en = 0 main_online_share_buf_num = 2 main_encpp_enable = 1 sub_isp = 0 sub_vipp = 4 sub_src_width = 640 sub_src_height = 360 sub_pixel_format = "aw_lbc_2_0x" #nv21,nv12,yu12,yv12;aw_lbc_2_5x,aw_lbc_2_0x,aw_lbc_1_5x,aw_lbc_1_0x sub_wdr_enable = 0 sub_vi_buf_num = 3 sub_src_frame_rate = 20 #fps sub_vipp_crop_en = 1 sub_vipp_crop_rect_x = 0 sub_vipp_crop_rect_y = 0 sub_vipp_crop_rect_w = 1888 sub_vipp_crop_rect_h = 1072 sub_viChn = 0 #-1:disale sub stream sub_venc_chn = 1 #-1:disale sub stream sub_encode_type = "H.264" sub_encode_width = 640 #1280x720->720p, 1920x1080->1080p, 2560×1440->2k, 3840x2160->4k, 7680x4320->8k sub_encode_height = 360 sub_encode_frame_rate = 20 #fps sub_encode_bitrate = 256000 #5M:5242880, 2M:2097152, 1M:1048576, 0.5M:512000 sub_file_path = #"/mnt/extsd/subStream.raw" #if no path is specified, it will not be saved. sub_encpp_enable = 1 sub_lapse_viChn = 1 #-1:disale sub lapse stream sub_lapse_venc_chn = 2 #-1:disale sub lapse stream sub_lapse_encode_type = "H.264" sub_lapse_encode_width = 640 #1280x720->720p, 1920x1080->1080p, 2560×1440->2k, 3840x2160->4k, 7680x4320->8k sub_lapse_encode_height = 360 sub_lapse_encode_frame_rate = 20 #fps sub_lapse_encode_bitrate = 256000 #5M:5242880, 2M:2097152, 1M:1048576, 0.5M:512000 sub_lapse_file_path = #"/mnt/extsd/subLapseStream.raw" #if no path is specified, it will not be saved. sub_lapse_time = 1000000 #unit:us sub_lapse_encpp_enable = 1 isp_ve_linkage_enable = 1 camera_adaptive_moving_and_static_enable = 0 ve_lens_moving_max_qp = 40 wb_yuv_enable = 0 wb_yuv_buf_num = 1 wb_yuv_start_index = 0 wb_yuv_total_cnt = 10 wb_yuv_stream_channel = 0 #0:main stream, 1:sub stream, 2:sub lapse stream wb_yuv_file_path = "/mnt/extsd/wb_yuv.yuv" AND THIS ERROR OUT : root@TinaLinux:/mnt/extsd# /mnt/extsd/sample_rtsp -path /mnt/extsd/sample_rtsp.c onf WARNING: Logging before InitGoogleLogging() is written to STDERR I0101 03:24:53.447822 1281 sample_rtsp.c:92] <ParseCmdLine> sample virvi2venc path:[/mnt/extsd/sample_rtsp], arg number is [3] I0101 03:24:53.450302 1281 confparser.c:60] <createConfParser> load conf file /mnt/extsd/sample_rtsp.conf ok! I0101 03:24:53.451141 1281 sample_rtsp.c:291] <loadSampleConfig> IspAndVeLinkageEn:1, AdaptEn:0, LensMoveMaxQp:40 Committed_AS: 5532 kB I0101 03:24:53.459729 1281 mpi_sys.c:842] <AW_MPI_SYS_SetConf> kfctmpdir is [/tmp] >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Media Process Platform<<<<<<<<<<<<<<<<<<<<<<<<<<<< modName : MPP-Platform tag : V1.0 Release branch: v5-dev commit: 4eed413532ad87725895a8cb1ba75e22fc328233 date : 20170725 author: jenkins iniparser: cannot open /etc/cedarx.conf iniparser: cannot open /vendor/etc/cedarx.conf I0101 03:24:53.463345 1281 mpi_sys.c:1455] <AW_MPI_SYS_Init> ISP init I0101 03:24:53.464116 1281 isp_version.h:39] <isp_version_info> [ISP]>>>>>>>>>>>>>>>>>>>> ISP VERSION INFO <<<<<<<<<<<<<<<<<<< IPCORE: ISP600 branch: libisp-dev commit: 5b30d9b8f8190196d863bc91576af5356022b433 date : Thu Jan 25 17:23:23 2024 +0800 author: <mayifei@allwinnertech.com> -------------------------------------------------------- I0101 03:24:53.464788 1281 mpi_sys.c:1457] <AW_MPI_SYS_Init> ISP init done I0101 03:24:53.465759 1281 hwdisplay.c:84] <hw_display_init> I0101 03:24:53.466227 1281 hwdisplay.c:993] <hwd_init> (hwd_init 993) I0101 03:24:53.466883 1281 hwdisplay.c:1048] <hwd_init> ret[0][2,0]ch[0]lyl[0] init: enable[0], screenwin[0,0, 0x0], zorder[0], alpha[mode:0, value:0] I0101 03:24:53.490072 1281 audio_hw.c:189] <MakeAllMixerElemsAvailable> pcm open and close, all MixerElems maybe exist. I0101 03:24:53.490593 1281 alsa_interface.c:712] <alsaOpenMixer> open mixer:hw:0 I0101 03:24:53.492970 1281 alsa_interface.c:767] <alsaOpenMixer> set playback vol_val to value: 27 I0101 03:24:53.493490 1281 alsa_interface.c:712] <alsaOpenMixer> open mixer:hw:1 I0101 03:24:53.494908 1281 sample_rtsp.c:422] <configMainStream> main vipp0 ve_online_en:0, dma_buf_num:0, venc ch0 OnlineEnable:0, OnlineShareBufNum:0 I0101 03:24:53.495407 1281 sample_rtsp.c:449] <configMainStream> main EncppSharpAttenCoefPer: 100% I0101 03:24:53.495558 1281 sample_rtsp.c:463] <configMainStream> main vbvThreshSize: 147450, vbvBufSize: 933882 I0101 03:24:53.496132 1281 video.c:107] <video_init> [ISP]video device name is vin_video0 I0101 03:24:53.496365 1281 isp_dev.c:566] <isp_video_open> [ISP]open video device[0], detect isp0 success! I0101 03:24:53.497176 1281 video.c:1063] <video_set_isp_bk_buffer_align> [ISP]video_set_isp_bk_buffer_align yuv_align_en = 0, lbc_align_en = 1 E0101 03:24:53.497363 1281 video.c:1065] <video_set_isp_bk_buffer_align> [ISP_ERR]video0 video_set_isp_bk_buffer_align failed!!! I0101 03:24:53.497919 1281 videoInputHw.c:1104] <videoInputHw_SetChnAttr> ViCh[0] LBC pix:0x3132434c, line_tar_bits[0]:9216, line_tar_bits[1]:13824 I0101 03:24:53.499319 1281 videoInputHw.c:1124] <videoInputHw_SetChnAttr> bs_len:61440, frm_bit:11520 I0101 03:24:53.499939 1286 mpi_sys.c:1073] <MonitorEnvVarThread> detect user environment: I0101 03:24:53.501282 1286 mpi_sys.c:1074] <MonitorEnvVarThread> /tmp/mpp_log_level I0101 03:24:53.501455 1286 mpi_sys.c:1075] <MonitorEnvVarThread> /tmp/mpp_venc_sei_config_param I0101 03:24:53.749066 1281 video.c:172] <video_set_fmt> [ISP]video0 fd[9] ve_online_en=0, dma_buf_num=0 I0101 03:24:53.756470 1281 isp_dev.c:390] <isp_tdm_open> [ISP]tdm_rx device name is sunxi_tdm_rx.0 I0101 03:24:53.757127 1281 isp_dev.c:460] <isp_dev_open> [ISP]open isp device[0] success! E0101 03:24:53.757316 1281 isp_dev.c:956] <isp_sensor_get_configs> [ISP_ERR]gc2053_mipi get config failed: Invalid argument (22). W0101 03:24:53.758671 1281 isp_helper.c:106] <isp_ctx_save_init> [ISP_WARN]open /mnt/extsd/isp0_0_0_0_0_gc2053_mipi_ctx_saved.bin failed, err:No such file or directory. I0101 03:24:53.758980 1281 isp_ini_parse.c:1650] <parser_ini_info> [ISP]prefer isp config: [gc2053_mipi], 0x0, 0, 0, 0 W0101 03:24:53.759608 1281 isp_ini_parse.c:1669] <parser_ini_info> [ISP_WARN]cannot find gc2053_mipi_0_0_0_0_0 isp config, use gc2053_mipi_1920_1088_20_0_0 -> [gc2053_mipi_isp600_20220511_164617_vlc4_day] E0101 03:24:53.762955 1281 isp_manage.c:2575] <isp_ctx_config_init> [ISP_ERR]sensor attribute is not init. I0101 03:24:53.763580 1281 isp.c:1235] <isp_run> [ISP]create isp0 server thread! E0101 03:24:53.765018 1285 isp_dev.c:956] <isp_sensor_get_configs> [ISP_ERR]gc2053_mipi get config failed: Invalid argument (22). W0101 03:24:53.765190 1285 videoInputHw.c:6258] <VideoInputHw_CapThread> fatal error! Get isp[0] sensor information failed! must be called AW_MPI_ISP_Run before AW_MPI_VI_EnableVipp. I0101 03:24:53.767622 1285 videoInputHw.c:6297] <VideoInputHw_CapThread> EnableVipp[0]: vfmt.bufs:3, online:0 E0101 03:24:53.770593 1287 isp_dev.c:718] <isp_dev_start> [ISP_ERR]unable to subscribe to tdm event: Not a tty (25). I0101 03:24:53.798774 1281 videoInputHw.c:1316] <videoInputHw_ChnEnable> receive enable vipp[0] reply: 0x0! iniparser: cannot open /etc/cedarc.conf iniparser: cannot open /etc/cedarc.conf INFO : cedarc <cdc_log_set_level:43>: Set log level to 3 from /vendor/etc/cedarc.conf DEBUG : cedarc <LogVersionInfo:44>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cedar Codec <<<<<<<<<<<<<<<<<<<<<<<<<<<< tag : branch: tina-v853-dev commit: 3975729c81dab9f05e2722e09e64d018b4b03c44 date : Sat Jan 27 15:33:52 2024 +0800 author: chenyibin change-id : I1798fdb3cfa479b7f3eabb212078a906cbe503eb release_author : ericwang patch : ---------------------------------------------------------------------- DEBUG : cedarc <VEncoderRegister:1022>: 1117 register 2:h264 DEBUG : cedarc <VEncoderRegister:1032>: register codec: '2:h264' success. INFO : cedarc <CedarPluginVENCInit_h264:13347>: register h264 encoder success! DEBUG : cedarc <VEncoderRegister:1022>: 1117 register 3:h265 DEBUG : cedarc <VEncoderRegister:1032>: register codec: '3:h265' success. INFO : cedarc <CedarPluginVENCInit_h265:14107>: register h265 encoder success! DEBUG : cedarc <VEncoderRegister:1022>: 1117 register 1:jpeg DEBUG : cedarc <VEncoderRegister:1032>: register codec: '1:jpeg' success. INFO : cedarc <CedarPluginVENCInit_jpeg:3199>: register jpeg encoder success! DEBUG : cedarc <VeInitialize:1138>: shutdown power up ve INFO : cedarc <VeInitialize:1172>: *** ic_version = 0x1302000023010, iniparser: cannot open /etc/cedarc.conf DEBUG : cedarc <CdcIniParserInit:36>: cannot parse file: /etc/cedarc.conf DEBUG : cedarc <VeInitialize:1186>: bUseProcessLock = 0, eVeHwLockType = 0 DEBUG : cedarc <VeInitialize:1226>: *** nPhyOffset = 0x0 DEBUG : cedarc <VeSetSpeed:1734>: *** set ve freq to 400 Mhz *** DEBUG : cedarc <VeInitialize:1281>: ve init ok DEBUG : ionAlloc <__GetIonMemOpsS:965>: *** get __GetIonMemOpsS *** DEBUG : ionAlloc <ion_alloc_open:140>: begin ion_alloc_open DEBUG : ionAlloc <ion_alloc_open:173>: get offset by ve INFO : cedarc <VeInitialize:1172>: *** ic_version = 0x1302000023010, iniparser: cannot open /etc/cedarc.conf DEBUG : cedarc <CdcIniParserInit:36>: cannot parse file: /etc/cedarc.conf DEBUG : cedarc <VeInitialize:1186>: bUseProcessLock = 0, eVeHwLockType = 0 DEBUG : cedarc <VeInitialize:1226>: *** nPhyOffset = 0x0 DEBUG : cedarc <VeSetSpeed:1734>: *** set ve freq to 400 Mhz *** DEBUG : cedarc <VeInitialize:1281>: ve init ok DEBUG : ionAlloc <ion_alloc_open:182>: ** phy offset = 0 DEBUG : cedarc <VeRelease:1334>: ve release ok DEBUG : cedarc <CdcMessageQueueCreate:47>: nMessageSize = 20 DEBUG : cedarc <H265SetParameter:13635>: VENC_IndexParamProductCase: 0 I0101 03:24:53.827952 1281 VideoEnc_Component.c:7350] <VideoEncComponentTunnelRequest> set inputPortTunnelFlag = TRUE I0101 03:24:53.828115 1281 sample_rtsp.c:583] <configSubStream> vipp[4] crop en:1 X:0 Y:0 W:1888 H:1072 I0101 03:24:53.828195 1281 sample_rtsp.c:596] <configSubStream> sub EncppSharpAttenCoefPer: 33% I0101 03:24:53.828260 1281 sample_rtsp.c:610] <configSubStream> sub vbvThreshSize: 24000, vbvBufSize: 152000 I0101 03:24:53.828396 1281 video.c:107] <video_init> [ISP]video device name is vin_video4 I0101 03:24:53.828618 1281 isp_dev.c:566] <isp_video_open> [ISP]open video device[4], detect isp0 success! I0101 03:24:53.828803 1281 video.c:1063] <video_set_isp_bk_buffer_align> [ISP]video_set_isp_bk_buffer_align yuv_align_en = 0, lbc_align_en = 1 E0101 03:24:53.828895 1281 video.c:1065] <video_set_isp_bk_buffer_align> [ISP_ERR]video4 video_set_isp_bk_buffer_align failed!!! I0101 03:24:53.828974 1281 videoInputHw.c:1104] <videoInputHw_SetChnAttr> ViCh[4] LBC pix:0x3132434c, line_tar_bits[0]:3072, line_tar_bits[1]:4608 I0101 03:24:53.829261 1281 videoInputHw.c:1124] <videoInputHw_SetChnAttr> bs_len:20480, frm_bit:3840 I0101 03:24:54.049307 1281 videoInputHw.c:1390] <videoInputHw_SetCrop> vipp[4] set crop X:0, Y:0, Width:1888, Height:1072 E0101 03:24:54.060158 1287 isp_dev.c:274] <isp_stat_process_buffer> [ISP_ERR]AEWB: stats error, skipping buffer. E0101 03:24:54.063049 1285 videoInputHw.c:5931] <videoInputHw_GetData> fatal error! LBC wrong data len or buf size, offset_dst:1555200 + data_len:11520 > size:1556224 E0101 03:24:54.063196 1285 videoInputHw.c:6607] <VideoInputHw_CapThread> fatal error! videoInpuHw get data fail[0xa0108009], check code! E0101 03:24:54.063301 1285 isp_dev.c:956] <isp_sensor_get_configs> [ISP_ERR]gc2053_mipi get config failed: Invalid argument (22). W0101 03:24:54.063377 1285 videoInputHw.c:6258] <VideoInputHw_CapThread> fatal error! Get isp[0] sensor information failed! must be called AW_MPI_ISP_Run before AW_MPI_VI_EnableVipp. I0101 03:24:54.064129 1285 videoInputHw.c:6297] <VideoInputHw_CapThread> EnableVipp[4]: vfmt.bufs:3, online:0 I0101 03:24:54.065692 1281 videoInputHw.c:1316] <videoInputHw_ChnEnable> receive enable vipp[4] reply: 0x0! iniparser: cannot open /etc/cedarc.conf DEBUG : cedarc <CdcIniParserInit:36>: cannot parse file: /etc/cedarc.conf iniparser: cannot open /etc/cedarc.conf DEBUG : cedarc <CdcIniParserInit:36>: cannot parse file: /etc/cedarc.conf DEBUG : cedarc <VencCreate:555>: now cedarc log level:3 INFO : cedarc <cdc_log_set_level:43>: Set log level to 3 from /vendor/etc/cedarc.conf DEBUG : cedarc <LogVersionInfo:44>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cedar Codec <<<<<<<<<<<<<<<<<<<<<<<<<<<< tag : branch: tina-v853-dev commit: 3975729c81dab9f05e2722e09e64d018b4b03c44 date : Sat Jan 27 15:33:52 2024 +0800 author: chenyibin change-id : I1798fdb3cfa479b7f3eabb212078a906cbe503eb release_author : ericwang patch : ---------------------------------------------------------------------- DEBUG : cedarc <VEncoderRegister:1018>: Add '2:h264' fail! '2:h264' already register! DEBUG : cedarc <CedarPluginVENCInit_h264:13351>: h264 encoder had already register! DEBUG : cedarc <VEncoderRegister:1018>: Add '3:h265' fail! '3:h265' already register! DEBUG : cedarc <CedarPluginVENCInit_h265:14111>: h265 encoder had alread register DEBUG : cedarc <VEncoderRegister:1018>: Add '1:jpeg' fail! '1:jpeg' already register! DEBUG : cedarc <CedarPluginVENCInit_jpeg:3203>: jpeg encoder had already register INFO : cedarc <VeInitialize:1172>: *** ic_version = 0x1302000023010, iniparser: cannot open /etc/cedarc.conf DEBUG : cedarc <CdcIniParserInit:36>: cannot parse file: /etc/cedarc.conf DEBUG : cedarc <VeInitialize:1186>: bUseProcessLock = 0, eVeHwLockType = 0 DEBUG : cedarc <VeInitialize:1226>: *** nPhyOffset = 0x0 DEBUG : cedarc <VeSetSpeed:1734>: *** set ve freq to 400 Mhz *** DEBUG : cedarc <VeInitialize:1281>: ve init ok DEBUG : ionAlloc <__GetIonMemOpsS:965>: *** get __GetIonMemOpsS *** DEBUG : ionAlloc <ion_alloc_open:140>: begin ion_alloc_open DEBUG : cedarc <H264EncOpenVer2:10490>: icverion = 0x23010, bIsRegVerE230 = 1 DEBUG : cedarc <CdcMessageQueueCreate:47>: nMessageSize = 20 DEBUG : cedarc <H264SetParameterVer2:12870>: VENC_IndexParamProductCase: 0 I0101 03:24:54.080081 1281 VideoEnc_Component.c:7350] <VideoEncComponentTunnelRequest> set inputPortTunnelFlag = TRUE I0101 03:24:54.080267 1281 sample_rtsp.c:730] <configSubLapseStream> subLapse EncppSharpAttenCoefPer: 33% I0101 03:24:54.080351 1281 sample_rtsp.c:744] <configSubLapseStream> SubLapse vbvThreshSize: 24000, vbvBufSize: 152000 iniparser: cannot open /etc/cedarc.conf DEBUG : cedarc <CdcIniParserInit:36>: cannot parse file: /etc/cedarc.conf iniparser: cannot open /etc/cedarc.conf DEBUG : cedarc <CdcIniParserInit:36>: cannot parse file: /etc/cedarc.conf DEBUG : cedarc <VencCreate:555>: now cedarc log level:3 INFO : cedarc <cdc_log_set_level:43>: Set log level to 3 from /vendor/etc/cedarc.conf DEBUG : cedarc <LogVersionInfo:44>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cedar Codec <<<<<<<<<<<<<<<<<<<<<<<<<<<< tag : branch: tina-v853-dev commit: 3975729c81dab9f05e2722e09e64d018b4b03c44 date : Sat Jan 27 15:33:52 2024 +0800 author: chenyibin change-id : I1798fdb3cfa479b7f3eabb212078a906cbe503eb release_author : ericwang patch : ---------------------------------------------------------------------- DEBUG : cedarc <VEncoderRegister:1018>: Add '2:h264' fail! '2:h264' already register! DEBUG : cedarc <CedarPluginVENCInit_h264:13351>: h264 encoder had already register! DEBUG : cedarc <VEncoderRegister:1018>: Add '3:h265' fail! '3:h265' already register! DEBUG : cedarc <CedarPluginVENCInit_h265:14111>: h265 encoder had alread register DEBUG : cedarc <VEncoderRegister:1018>: Add '1:jpeg' fail! '1:jpeg' already register! DEBUG : cedarc <CedarPluginVENCInit_jpeg:3203>: jpeg encoder had already register INFO : cedarc <VeInitialize:1172>: *** ic_version = 0x1302000023010, iniparser: cannot open /etc/cedarc.conf DEBUG : cedarc <CdcIniParserInit:36>: cannot parse file: /etc/cedarc.conf DEBUG : cedarc <VeInitialize:1186>: bUseProcessLock = 0, eVeHwLockType = 0 DEBUG : cedarc <VeInitialize:1226>: *** nPhyOffset = 0x0 DEBUG : cedarc <VeSetSpeed:1734>: *** set ve freq to 400 Mhz *** DEBUG : cedarc <VeInitialize:1281>: ve init ok DEBUG : ionAlloc <__GetIonMemOpsS:965>: *** get __GetIonMemOpsS *** DEBUG : ionAlloc <ion_alloc_open:140>: begin ion_alloc_open DEBUG : cedarc <H264EncOpenVer2:10490>: icverion = 0x23010, bIsRegVerE230 = 1 DEBUG : cedarc <CdcMessageQueueCreate:47>: nMessageSize = 20 DEBUG : cedarc <H264SetParameterVer2:12870>: VENC_IndexParamProductCase: 0 I0101 03:24:54.094630 1281 sample_rtsp.c:1431] <main> Lapse set TimeLapse 1000000 us I0101 03:24:54.095239 1281 VideoEnc_Component.c:4345] <VideoEncSetTimeLapse> SetTimeLapse: captureIntervalUs=1000000.000000, dstFrameIntervalUs=50000.000000, recType=1 I0101 03:24:54.095392 1281 VideoEnc_Component.c:7350] <VideoEncComponentTunnelRequest> set inputPortTunnelFlag = TRUE WARNING: cedarc <CheckSetParamInt:1039>: Notice: sVbrParam.nQuality is 10, but its suggested value is 1 ! DEBUG : cedarc <H265SetParameter:13487>: VENC_IndexParamPFrameIntraEn: use_intra_in_p_flag:1 I0101 03:24:54.096084 1289 VideoEnc_Component.c:823] <setVbvBufferConfig> user set stream buffer size[933882]bytes I0101 03:24:54.096235 1289 VideoEnc_Component.c:833] <setVbvBufferConfig> user set threshSize[147450]bytes I0101 03:24:54.096324 1289 VideoEnc_Component.c:860] <setVbvBufferConfig> bit rate is 1536Kb, set encode vbv size 933888, frame length threshold 147450 DEBUG : cedarc <H265SetParameter:13036>: set rot angle: p_enc->rot_angle = 0... DEBUG : cedarc <H265SetParameter:13627>: VENC_IndexParamIsNightCaseFlag: is_night_case = 0 I0101 03:24:54.096453 1289 VideoEnc_Component.c:2122] <CedarvVideoEncInit> DropFrameNum: 0 I0101 03:24:54.096525 1289 VideoEnc_Component.c:2138] <CedarvVideoEncInit> VeRecRefBufReduceEnable: 0 DEBUG : cedarc <VencInit:803>: func = VencInit, line = 803 DEBUG : cedarc <VencInit:816>: bOnlineMode = 1, bOnlineChannel = 0 DEBUG : cedarc <VencInit:819>: lbc2.5 = 0, 2.0 = 1, 1.5 = 0, format = 19 DEBUG : cedarc <H265Init:11191>: share buf num = 1 DEBUG : cedarc <BitStreamCreate:129>: BitStreamCreate OK DEBUG : cedarc <h265InitMemRecRefE230:4296>: recRefQsubDataBufSize = 190976, recRefQsubInfoBufSize = 8608, lbcBusSize = 3067904, lbcMode = 1 DEBUG : ionAlloc <__GetIonMemOpsS:965>: *** get __GetIonMemOpsS *** DEBUG : ionAlloc <ion_alloc_open:140>: begin ion_alloc_open INFO : cedarc <VeInitialize:1172>: *** ic_version = 0x1302000023010, iniparser: cannot open /etc/cedarc.conf DEBUG : cedarc <CdcIniParserInit:36>: cannot parse file: /etc/cedarc.conf DEBUG : cedarc <VeInitialize:1186>: bUseProcessLock = 0, eVeHwLockType = 0 DEBUG : cedarc <VeInitialize:1226>: *** nPhyOffset = 0x0 DEBUG : cedarc <VeSetSpeed:1734>: *** set ve freq to 400 Mhz *** DEBUG : cedarc <VeInitialize:1281>: ve init ok E0101 03:24:54.110896 1287 isp_dev.c:859] <isp_sync_debug_info> [ISP_ERR]VIDIOC_VIN_ISP_GET_INFO error! W0101 03:24:54.111092 1287 isp.c:450] <isp_ctx_get_sensor_info> [ISP_WARN]isp debugfs node not support!!!

我，目前，是在局域网，可以利用vlc看到摄像头：rtsp://192.168.1.201:8554/ch1
就是编译了mpp即可。
请教大家：如果我想把摄像头的内容实时投到手机上，这个流程是怎样的？就类似市面上的网络摄像头，可以通过手机实时看的功能。

用的哪个版本的u-boot？

@zifeiyu MAX13487是自动收发的RS485芯片，设备树不需要添加584180ca-7c7d-43a1-a302-40a04476b4b5-image.png