Navigation

    全志在线开发者论坛

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • 在线文档
    • 社区主页
    1. Home
    2. Recent
    Log in to post
    • All categories
    • All Topics
    • New Topics
    • Watched Topics
    • Unreplied Topics

    • 公告
    • 芯片
    •          T Series
    •          A Series
    •          V Series
    •          MR Series
    •          H/F/TV Series
    •          Wireless & Analog Series
    • Special
    •          创龙科技专区
    •          飞凌嵌入式专区
    •          爱搞机专区
    • Technical topics
    •          RTOS
    •          Linux
    •          GUI
    • Others
    •          代码下载问题专区
    •          编译和烧写问题专区
    •          其它全志芯片讨论区
    •          灌水区
    • Forlinx

      飞凌嵌入式T527核心板获得【OpenHarmony生态产品兼容性证书】
      飞凌嵌入式专区 • Posted at • Forlinx

      2 Votes
      0 Replies
      90 Views

      No one has replied

      0
    • Forlinx

      飞凌嵌入式T527核心板+OpenHarmony 4.1,打造工业智能化升级的新范式
      飞凌嵌入式专区 • Posted at • Forlinx

      0 Votes
      0 Replies
      198 Views

      No one has replied

      0
    • T

      t113i 怎么只烧写uboot到SD卡,从SD卡启动
      飞凌嵌入式专区 • Posted at • tigers

      1 Votes
      4 Replies
      766 Views

      T Replied at

      之前在网上看到有大神提供过如下方法但是我没测试成功
      f73c2c77-71f5-48f0-8cbe-bafeb89cb0ea-d26979f7aace50c97300f30d3d0fb226.png
      这里说的要先配置好sys_config.fex 怎么配置

      4
    • L

      想问问怎么获取全志客户服务平台的资源
      飞凌嵌入式专区 • Posted at • lyl20050926

      1 Votes
      1 Replies
      175 Views

      livpo Replied at

      @lyl20050926 用公司账户在全志客户服务平台上按流程注册就可以获取相关资料了

      1
    • T

      单独编译linux-5.4 提示没有规则制作目标 arch/arm/boot/dts/board.dtb
      飞凌嵌入式专区 • Posted at • tigers

      0 Votes
      2 Replies
      516 Views

      T Replied at

      @jasonzhang 嗯,感谢大神

      2
    • T

      uboot-spl
      飞凌嵌入式专区 • Posted at • tigers

      0 Votes
      0 Replies
      178 Views

      No one has replied

      0
    • Forlinx

      【活动】飞凌嵌入式T536开发板试用,写评测,免费送!
      飞凌嵌入式专区 • Posted at • Forlinx

      1 Votes
      0 Replies
      257 Views

      No one has replied

      0
    • L

      T113-S3连接EC-800KCN采用RNDIS上网问题
      飞凌嵌入式专区 • Posted at • Laoliu

      0 Votes
      1 Replies
      319 Views

      W Replied at

      @laoliu 还没拨号吧

      1
    • Forlinx

      智能配电新纪元:基于飞凌嵌入式T536核心板的DTU解决方案
      飞凌嵌入式专区 • Posted at • Forlinx

      0 Votes
      0 Replies
      323 Views

      No one has replied

      0
    • Forlinx

      飞凌嵌入式携手全志,T536全国产核心板重磅发布
      飞凌嵌入式专区 • Posted at • Forlinx

      1 Votes
      0 Replies
      369 Views

      No one has replied

      0
    • Forlinx

      飞凌嵌入式FET527N-C核心板已适配OpenHarmony4.1
      飞凌嵌入式专区 • Posted at • Forlinx

      2 Votes
      3 Replies
      1114 Views

      T Replied at

      @forlinx 好家伙,真厉害

      3
    • Forlinx

      飞凌嵌入式T527核心板已适配Forlinx Desktop 22.04
      飞凌嵌入式专区 • Posted at • Forlinx

      1 Votes
      0 Replies
      580 Views

      No one has replied

      0
    • T

      飞凌T113-i核心板+自制底板 mcp2515驱动失败
      飞凌嵌入式专区 • Posted at • TS_123456789

      0 Votes
      1 Replies
      769 Views

      J Replied at

      @ts_123456789 在 飞凌T113-i核心板+自制底板 mcp2515驱动失败 中说:
      79d371d9-c568-4b3e-ae18-3138d8d8a4a8-image.png
      c8e76249-a186-4f87-9fbc-35578f9f29e4-image.png
      这个报错是mcp驱动返回的错误码,请检查时钟。要求范围在1M~25M之间

      1
    • Forlinx

      飞凌嵌入式T113-i开发板RISC-V核的实时应用方案
      飞凌嵌入式专区 • Posted at • Forlinx

      1 Votes
      0 Replies
      649 Views

      No one has replied

      0
    • Forlinx

      飞凌嵌入式FET527N-C核心板现已适配Android 13
      飞凌嵌入式专区 • Posted at • Forlinx

      1 Votes
      0 Replies
      428 Views

      No one has replied

      0
    • Forlinx

      FET113i-S核心板已支持RISC-V,打造国产化降本的更优解
      飞凌嵌入式专区 • Posted at • Forlinx

      1 Votes
      1 Replies
      532 Views

      A Replied at

      @forlinx 在 FET113i-S核心板已支持RISC-V,打造国产化降本的更优解 中说:

      T113-i的RISC-V核(玄铁C906)资料

      1
    • W

      OK113i-S 编译环境相关 -工具链,内核,文件系统,flash操作工具,flash分区方案 串口
      飞凌嵌入式专区 • Posted at • weilin1375

      0 Votes
      0 Replies
      365 Views

      No one has replied

      0
    • J

      A40i 配置好pwm设备树,却没有/sys/class/pwm节点
      飞凌嵌入式专区 • Posted at • JimmyDai

      1 Votes
      1 Replies
      545 Views

      No one has replied

      1
    • Forlinx

      T536行业首发!飞凌嵌入式FET536-C/FET536-S核心板惊艳亮相
      飞凌嵌入式专区 • Posted at • Forlinx

      1 Votes
      0 Replies
      859 Views

      No one has replied

      0
    • Forlinx

      飞凌嵌入式FET527-C核心板上新!低成本、高算力、新选择
      飞凌嵌入式专区 • Posted at • Forlinx

      0 Votes
      0 Replies
      575 Views

      No one has replied

      0
    • X

      T507现在的固件不适配我的底板,请大佬帮忙看看如何解决
      飞凌嵌入式专区 • Posted at • xexee

      1 Votes
      0 Replies
      761 Views

      No one has replied

      0
    • Forlinx

      飞凌嵌入式技术创新日深圳站,8月26日见!
      飞凌嵌入式专区 • Posted at • Forlinx

      0 Votes
      0 Replies
      763 Views

      No one has replied

      0
    • T

      飞凌OK-T527开发板试用1-开箱体验及开机体验
      飞凌嵌入式专区 • Posted at • timelessxp

      1 Votes
      0 Replies
      852 Views

      No one has replied

      0
    • T

      飞凌OK-T527开发板试用3-nbench性能测试
      飞凌嵌入式专区 • Posted at • timelessxp

      0 Votes
      0 Replies
      769 Views

      No one has replied

      0
    • T

      飞凌OK-T527开发板试用2-局域网内文件传输
      飞凌嵌入式专区 • Posted at • timelessxp

      0 Votes
      0 Replies
      733 Views

      No one has replied

      0
    • C

      飞凌T527扩大rootfs分区(buildroot系统)
      飞凌嵌入式专区 • Posted at • Cohen0415

      1 Votes
      0 Replies
      951 Views

      No one has replied

      0
    • Z

      飞凌OK-T527开发板试用3-modbus使用
      飞凌嵌入式专区 • Posted at • zxfeng

      0 Votes
      0 Replies
      845 Views

      No one has replied

      0
    • S

      飞凌OK-T527开发板试用-2.编译环境搭建
      飞凌嵌入式专区 • Posted at • soso90

      1 Votes
      0 Replies
      758 Views

      No one has replied

      0
    • Z

      飞凌OK-T527开发板试用2-简单的性能测试
      飞凌嵌入式专区 • Posted at • zxfeng

      1 Votes
      0 Replies
      1062 Views

      No one has replied

      0
    • Z

      飞凌OK-T527开发板试用1-开箱+交叉编译
      飞凌嵌入式专区 • Posted at • zxfeng

      1 Votes
      0 Replies
      958 Views

      No one has replied

      0
    • C

      飞凌OKT527开发板U-Boot添加自定义菜单
      飞凌嵌入式专区 • Posted at • Cohen0415

      1 Votes
      0 Replies
      1003 Views

      No one has replied

      0
    • C

      飞凌OKT527开发板1:开箱
      飞凌嵌入式专区 • Posted at • ckyyy

      4 Votes
      0 Replies
      832 Views

      No one has replied

      0
    • S

      飞凌OK-T527开发板试用-1.开箱以及hdmi输出
      飞凌嵌入式专区 • Posted at • soso90

      3 Votes
      0 Replies
      988 Views

      No one has replied

      0
    • Forlinx

      加入AWOL「体验官」 免费玩转T527开发板
      飞凌嵌入式专区 • Posted at • Forlinx

      3 Votes
      1 Replies
      1578 Views

      S Replied at

      这么好的活动,没人顶? 已经报名,坐等审核~

      1
    • tigger

      飞凌T507开发板实现SPI转CAN 全过程
      飞凌嵌入式专区 • Posted at • tigger

      1 Votes
      5 Replies
      2978 Views

      T Replied at

      @uuuuid HI, 这个方案稳定么?我跑一段时间canopen协议就挂掉了

      5
    • C

      请教:t113s3 adb 连接PC,工作正常,PC睡眠后唤醒,adb无法工作,串口log显示adb没有configure,该如何解决啊?
      飞凌嵌入式专区 • Posted at • cuijiadong

      0 Votes
      0 Replies
      813 Views

      No one has replied

      0
    • Forlinx

      飞凌嵌入式FET113i-S核心板在国产FTU中的适配性分析
      飞凌嵌入式专区 • 嵌入式 智能电网 ftu • Posted at • Forlinx

      1 Votes
      0 Replies
      819 Views

      No one has replied

      0
    • B

      OK113i-S开发板-3测试实时系统
      飞凌嵌入式专区 • Posted at • BSPlayer

      3 Votes
      1 Replies
      2283 Views

      xiaogcc23333 Replied at

      @bsplayer 在 OK113i-S开发板-3测试实时系统 中说:

      2.Xenomai:Xenomai提供了一个实时框架,为Linux操作系统添加了实时性能。它支持具有硬实时和软实时要求的应用程序,并通过分时多任务和抢占式调度来提供可预测性。
      这个系统就版本变化比较多,4之前是pipe,5后面是Dovetail,而且与内核版本匹配不太紧密,

      大佬,T113-i可以打dovetail上xenomai3.0吗?我看到xenomai官方说至少5.10的内核就给我劝退了.. 尝试打ipipe上xenomai2.6,编译有个TSC的错误。求教...
      47103b96-5de4-484b-b018-0ed62eadda49-图片.png

      1
    • J

      全志A40i -Linux5.10内核,修改串口波特率问题
      飞凌嵌入式专区 • Posted at • Jeper

      0 Votes
      1 Replies
      1594 Views

      B Replied at

      把调试串口的时钟频率和uart串口波特率改成一样的,应该就行了

      1
    • L

      飞凌 OK113i-C 全志T113-i开发板 rtl8723du WIFI 功能测试及蓝牙驱动移植
      飞凌嵌入式专区 • rtl8723du蓝牙驱动 t113-i • Posted at • lyphotoes

      2 Votes
      3 Replies
      2723 Views

      T Replied at

      学习到了,谢谢大佬

      3
    • J

      T507配置UART为4M波特率,传输数据出现乱码
      飞凌嵌入式专区 • Posted at • Jeper

      0 Votes
      2 Replies
      1666 Views

      J Replied at

      @jingyan
      有测过两块T507互发互收,都是用2M波特率,这样测试又是没有乱码。所以感觉理论上回环也是没有乱码的,跟PC端传输才有乱码。有空我再测一下回环。

      2
    • J

      在A40i开发板的u-boot阶段配置pwm功能
      飞凌嵌入式专区 • Posted at • Jeper

      0 Votes
      0 Replies
      663 Views

      No one has replied

      0
    • livpo

      技术帖 | 飞凌嵌入式T113-i开发板的休眠及唤醒操作
      飞凌嵌入式专区 • Posted at • livpo

      2 Votes
      1 Replies
      1804 Views

      J Replied at

      有没有指定gpio唤醒的方式呢

      1
    • livpo

      如何在飞凌嵌入式T113-i开发板的Buildroot中移植MQTT协议?
      飞凌嵌入式专区 • Posted at • livpo

      0 Votes
      0 Replies
      837 Views

      No one has replied

      0
    • Forlinx

      飞凌嵌入式A40i-H核心板已适配“矿鸿OS”
      飞凌嵌入式专区 • Posted at • Forlinx

      0 Votes
      0 Replies
      1277 Views

      No one has replied

      0
    • B

      OK113i-S开发板-2适配10寸LCD显示
      飞凌嵌入式专区 • Posted at • BSPlayer

      6 Votes
      2 Replies
      2410 Views

      B Replied at

      @dudu152 是的,因为我这个屏幕的40pin排线无法接入板子,只能通过转接板接入。
      这个转接板是我们另一个荣品的产品用的,我这里借用过来的。

      2
    • G

      T507使用mcp2515转CAN问题
      飞凌嵌入式专区 • Posted at • Gawaine

      0 Votes
      19 Replies
      6866 Views

      S Replied at

      @gawaine 在 T507使用mcp2515转CAN问题 中说:

      外部复位pin脚在下电后始终有一个大约0.8V的电平,即使拆掉C122这颗电容,这个0.8V的电平还是存在的,测一下mcp2515的VDD引脚,也有一个0.8V电平,又测了一下PMIC端,DCDC1的输出也有一个0.8V电源,

      你好,遇到同样的问题,请问您最终定位到问题点了吗?

      19
    • T

      【飞凌 OK113i-C 全志T113-i开发板】5.GPIO的控制
      飞凌嵌入式专区 • Posted at • Tristan_C

      0 Votes
      0 Replies
      1370 Views

      No one has replied

      0
    • T

      【飞凌 OK113i-C 全志T113-i开发板】4.WiFi和以太网络的使用
      飞凌嵌入式专区 • Posted at • Tristan_C

      0 Votes
      0 Replies
      1091 Views

      No one has replied

      0
    • B

      OK113i-S开发板-4视频编解码测试
      飞凌嵌入式专区 • Posted at • BSPlayer

      3 Votes
      1 Replies
      2041 Views

      T Replied at

      @bsplayer 好赞

      1
    • B

      OK113i-S开发板体验-1开箱和基本使用
      飞凌嵌入式专区 • Posted at • BSPlayer

      3 Votes
      3 Replies
      3056 Views

      T Replied at

      @bsplayer 好赞

      3
    • L

      飞凌 OK113i-C 全志T113-i开发板 CAN 通信C代码测试
      飞凌嵌入式专区 • t113-i canbus • Posted at • lyphotoes

      2 Votes
      1 Replies
      1580 Views

      L Replied at

      @lyphotoes 工程源码
      can-test-src.zip

      1
    • Forlinx

      【权威认证】飞凌嵌入式FET113i-S核心板国产化率达100%
      飞凌嵌入式专区 • Posted at • Forlinx

      0 Votes
      0 Replies
      853 Views

      No one has replied

      0
    • H

      OKT507-C V2.1 的HDMI怎么输出4K?
      飞凌嵌入式专区 • Posted at • haaland

      0 Votes
      1 Replies
      1440 Views

      N Replied at

      @haaland T507不支持真实的4K显示,硬件受限最大支持2k的buffer。所以超过2k的图片就无法显示

      1
    • T

      【飞凌 OK113i-C 全志T113-i开发板】3.开发环境准备和搭建
      飞凌嵌入式专区 • Posted at • Tristan_C

      3 Votes
      0 Replies
      1056 Views

      No one has replied

      0
    • T

      【飞凌 OK113i-C 全志T113-i开发板】2.一些有用的常用的命令测试
      飞凌嵌入式专区 • Posted at • Tristan_C

      0 Votes
      0 Replies
      1117 Views

      No one has replied

      0
    • T

      【飞凌 OK113i-C 全志T113-i开发板】1.开箱
      飞凌嵌入式专区 • Posted at • Tristan_C

      0 Votes
      0 Replies
      1101 Views

      No one has replied

      0
    • Forlinx

      四大优势!这款T113-i全国产核心板更值得关注
      飞凌嵌入式专区 • Posted at • Forlinx

      0 Votes
      0 Replies
      981 Views

      No one has replied

      0
    • W

      使用A40I芯片想把串口0打印的启动信息显示到显示屏上
      飞凌嵌入式专区 • Posted at • W535438616

      0 Votes
      0 Replies
      560 Views

      No one has replied

      0
    • L

      飞凌 OK113i-C 全志T113-i开发板初体验
      飞凌嵌入式专区 • t113-i 飞凌ok113i t113-i开发环境搭建 • Posted at • lyphotoes

      1 Votes
      0 Replies
      1421 Views

      No one has replied

      0
    • Forlinx

      【开发教程】 OKT507去掉IO扩展芯片,保留扩展引脚功能
      飞凌嵌入式专区 • Posted at • Forlinx

      0 Votes
      0 Replies
      872 Views

      No one has replied

      0
    • Forlinx

      只需4步,让A40i-H开发板的Linux系统拥有中文显示
      飞凌嵌入式专区 • Posted at • Forlinx

      0 Votes
      0 Replies
      994 Views

      No one has replied

      0
    • H

      OKT507 -c在有交互按钮的界面显示AHD摄像头的影像该如何实现
      飞凌嵌入式专区 • Posted at • haaland

      0 Votes
      1 Replies
      1209 Views

      bayche Replied at

      飞凌提供了一个关于camera的一个qt_demo程序,可以参考forlinx_desktop的源码中/OKT507-desktop-release/platform/framework/auto/qt_demo

      1
    • Forlinx

      抢先玩新品!「飞凌嵌入式」邀您担任OK113i-S产品体验官
      飞凌嵌入式专区 • Posted at • Forlinx

      3 Votes
      1 Replies
      973 Views

      No one has replied

      1
    • Forlinx

      T507-H技术帖 | 去掉IO扩展芯片后保留扩展引脚功能的实现方法
      飞凌嵌入式专区 • Posted at • Forlinx

      2 Votes
      0 Replies
      1003 Views

      No one has replied

      0
    • Forlinx

      A40i应用笔记 | 3种常见的网卡软件问题以及排查思路
      飞凌嵌入式专区 • Posted at • Forlinx

      1 Votes
      0 Replies
      1104 Views

      No one has replied

      0
    • newcastle

      调用ALSA音频采集无法识别库问题
      飞凌嵌入式专区 • Posted at • newcastle

      0 Votes
      1 Replies
      1280 Views

      newcastle Replied at

      LIBS += -L/root/workspace/allwinner/A40i/bsp/lichee/out/sun8iw11p1/linux/common/buildroot/host/usr/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/ -lasound

      在pro文件种添加这句好使了➿

      1
    • H

      OKT507-C的录像功能有没有相关的文档介绍
      飞凌嵌入式专区 • Posted at • haaland

      0 Votes
      0 Replies
      648 Views

      No one has replied

      0
    • Forlinx

      为T507-H开发板配置Samba服务,高效实现跨系统的文件共享
      飞凌嵌入式专区 • Posted at • Forlinx

      2 Votes
      0 Replies
      1055 Views

      No one has replied

      0
    • D

      A40i tf卡固化系统到emmc剩余空间指定
      飞凌嵌入式专区 • Posted at • dort91011

      0 Votes
      1 Replies
      1387 Views

      A Replied at

      @dort91011 这个是UDISK分区,是烧录软件在烧录的时候自动划分的空间。如果需要手动配置,请在sys_partition.fex里手动配置这个分区的size

      1
    • N

      T507qt虚拟键盘二次开发
      飞凌嵌入式专区 • Posted at • nzdzhd

      0 Votes
      1 Replies
      999 Views

      bayche Replied at

      @nzdzhd
      这是虚拟键盘存放路径,

      Image_20230911085535.png.thumb.jpg

      可以先尝试修改/home/forlinx/work/OKT507-linux-sdk/platform/framework/auto/sdk_lib/DWKeyboard/src路径下的inputview.cpp文件,具体路径根据你的源码解压路径而定。

      /home/forlinx/work/OKT507-linux-sdk/platform/framework/auto/sdk_lib/DWKeyboard这个路径是所调用的虚拟键盘qt工程的存放位置,改完之后需要修改该路径下Makefile里编写的一些路径,推荐用别的代码编辑器批量替换,因为有700多处需要改,改完之后该路径下执行make生成新的可执行文件,然后回到源码路径全编译,打包新镜像烧写即可

      1
    • D

      飞凌OKT507C在安卓系统启动时如何设置GPIO口为高电平
      飞凌嵌入式专区 • Posted at • ddrddr

      1 Votes
      0 Replies
      845 Views

      No one has replied

      0
    • B

      更换lcd屏幕
      飞凌嵌入式专区 • Posted at • bigfly

      0 Votes
      0 Replies
      1050 Views

      No one has replied

      0
    • Z

      T507如何适配千兆网口rtl8211
      飞凌嵌入式专区 • Posted at • Z_z

      0 Votes
      0 Replies
      772 Views

      No one has replied

      0
    • H

      电阻屏反应速度查看
      飞凌嵌入式专区 • Posted at • haaland

      0 Votes
      1 Replies
      1047 Views

      Y Replied at

      尝试将android工具getevent移植到linux中,可以成功查看电阻屏的反馈速度。
      参考了 https://www.cnblogs.com/liangliangge/p/12921889.html 中的办法
      工具的源码路径为:android/system/core/toolbox/getevent.c
      其中源码中getevent.c文件中内容有修改
      由于头文件input.h-labels.h生成过程中涉及权限问题,直接新建了input.h-labels.h文件并复制黏贴了参考链接中的内容
      Makefile文件参考了 lichee/buildroot-201611/target/user_rootfs_apps/cmd/subs 下的工程里的Makefile

      用getevent -lrt命令输出时间戳、上报速率等,要计算事件之间的时间间隔,我们可以取两个连续事件的时间戳(括号内的数值)并计算它们之间的差值。这个时间戳的单位不太清楚。

      1
    • zznzzn

      四线电阻触摸屏测试tslib无法校准,而且点击按钮无反应
      飞凌嵌入式专区 • Posted at • zznzzn

      0 Votes
      1 Replies
      1014 Views

      livpo Replied at

      您可以尝试一下在驱动里面加一些打印信息,看看您这个驱动是否有正常加载,看您这样像是没有把驱动正常加载进去。

      1
    • M

      A40i修改uart_debug_port之后烧录不了
      飞凌嵌入式专区 • Posted at • MasterLu

      0 Votes
      0 Replies
      954 Views

      No one has replied

      0
    • X

      T507烧写后启动还是Forlinx桌面
      飞凌嵌入式专区 • Posted at • xinqian_kb

      0 Votes
      1 Replies
      1201 Views

      xiaowenge Replied at

      看看log,确认一下有没有烧进去,以及烧到哪个存储介质去了

      1
    • M

      A40I AP问题
      飞凌嵌入式专区 • Posted at • MasterLu

      0 Votes
      1 Replies
      1322 Views

      M Replied at

      @masterlu
      random: Trying to read entropy from /dev/random
      Configuration file: /etc/hostapd.conf
      nl80211: Supported cipher 00-0f-ac:1
      nl80211: Supported cipher 00-0f-ac:5
      nl80211: Supported cipher 00-0f-ac:2
      nl80211: Supported cipher 00-0f-ac:4
      nl80211: Using driver-based off-channel TX
      nl80211: key_mgmt=0xd0f enc=0xf auth=0x7 flags=0x800d8c0 rrm_flags=0x0 probe_resp_offloads=0x0 max_stations=0 max_remain_on_chan=5000 max_scan_ssids=9
      nl80211: interface wlan0 in phy phy0
      nl80211: Set mode ifindex 7 iftype 3 (AP)
      nl80211: Setup AP(wlan0) - device_ap_sme=1 use_monitor=0
      nl80211: Subscribe to mgmt frames with AP handle 0x1dfbdd0 (device SME)
      nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1dfbdd0 match=04 multicast=0
      nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1dfbdd0 match=0501 multicast=0
      nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1dfbdd0 match=0503 multicast=0
      nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1dfbdd0 match=0504 multicast=0
      nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1dfbdd0 match=06 multicast=0
      nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1dfbdd0 match=08 multicast=0
      nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1dfbdd0 match=09 multicast=0
      nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1dfbdd0 match=0a multicast=0
      nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1dfbdd0 match=11 multicast=0
      nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x1dfbdd0 match=7f multicast=0
      nl80211: Register frame type=0xb0 (WLAN_FC_STYPE_AUTH) nl_handle=0x1dfbdd0 match= multicast=0
      nl80211: Enable Probe Request reporting nl_preq=0x1e00ea0
      nl80211: Register frame type=0x40 (WLAN_FC_STYPE_PROBE_REQ) nl_handle=0x1e00ea0 match= multicast=0
      rfkill: Cannot open RFKILL control device
      nl80211: RFKILL status not available
      nl80211: Add own interface ifindex 7 (ifidx_reason -1)
      nl80211: if_indices[16]: 7(-1)
      phy: phy0
      BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
      nl80211: No channel number found for frequency 5920 MHz
      nl80211: No channel number found for frequency 5940 MHz
      nl80211: Regulatory information - country=00
      nl80211: 2402-2472 @ 40 MHz 20 mBm
      nl80211: 2457-2482 @ 40 MHz 20 mBm (no IR)
      nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
      nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR)
      nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
      nl80211: 57240-63720 @ 2160 MHz 0 mBm
      nl80211: Added 802.11b mode based on 802.11g information
      nl80211: Mode IEEE 802.11g: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467[NO_IR] 2472[NO_IR] 2484[DISABLED]
      nl80211: Mode IEEE 802.11a: 5170[DISABLED] 5180[DISABLED] 5190[DISABLED] 5200[DISABLED] 5210[DISABLED] 5220[DISABLED] 5230[DISABLED] 5240[DISABLED] 5260[DISABLED] 5280[DISABLED] 5300[DISABLED] 5320[DISABLED] 5500[DISABLED]
      nl80211: Mode IEEE 802.11b: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467[NO_IR] 2472[NO_IR] 2484[DISABLED]
      Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=20 dBm
      Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=20 dBm
      Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=20 dBm
      Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=20 dBm
      Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=20 dBm
      Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=20 dBm
      Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=20 dBm
      Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=20 dBm
      Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=20 dBm
      Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=20 dBm
      Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=20 dBm
      Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=20 dBm
      Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=20 dBm
      Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=20 dBm
      Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=20 dBm
      Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=20 dBm
      Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=20 dBm
      Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=20 dBm
      Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=20 dBm
      Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=20 dBm
      Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=20 dBm
      Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=20 dBm
      Completing interface initialization
      Mode: IEEE 802.11g Channel: 3 Frequency: 2422 MHz
      DFS 0 channels required radar detection
      nl80211: Set freq 2422 (ht_enabled=0, vht_enabled=0, he_enabled=0, bandwidth=20 MHz, cf1=2422 MHz, cf2=0 MHz)

      freq=2422 he_enabled=0 vht_enabled=0 ht_enabled=0 channel_type=0
      RATE[0] rate=10 flags=0x1
      RATE[1] rate=20 flags=0x1
      RATE[2] rate=55 flags=0x1
      RATE[3] rate=110 flags=0x1
      RATE[4] rate=60 flags=0x0
      RATE[5] rate=90 flags=0x0
      RATE[6] rate=120 flags=0x0
      RATE[7] rate=180 flags=0x0
      RATE[8] rate=240 flags=0x0
      RATE[9] rate=360 flags=0x0
      RATE[10] rate=480 flags=0x0
      RATE[11] rate=540 flags=0x0
      hostapd_setup_bss(hapd=0x1dfb060 (wlan0), first=1)
      nl80211: flush -> DEL_STATION wlan0 (all)
      Using interface wlan0 with hwaddr f0:c8:14:7b:5a:4b and ssid "hostapd_test"
      Deriving WPA PSK based on passphrase
      SSID - hexdump_ascii(len=12):
      68 6f 73 74 61 70 64 5f 74 65 73 74 hostapd_test
      PSK (ASCII passphrase) - hexdump_ascii(len=8): [REMOVED]
      PSK (from passphrase) - hexdump(len=32): [REMOVED]
      random: Got 20/20 random bytes
      Get randomness: len=32 entropy=0
      GMK - hexdump(len=32): [REMOVED]
      Get randomness: len=32 entropy=0
      Key Counter - hexdump(len=32): [REMOVED]
      WPA: Delay group state machine start until Beacon frames have been configured
      nl80211: Set beacon (beacon_set=0)
      nl80211: Beacon head - hexdump(len=63): 80 00 00 00 ff ff ff ff ff ff f0 c8 14 7b 5a 4b f0 c8 14 7b 5a 4b 00 00 00 00 00 00 00 00 00 00 64 00 11 04 00 0c 68 6f 73 74 61 70 64 5f 74 65 73 74 01 08 82 84 8b 96 0c 12 18 24 03 01 03
      nl80211: Beacon tail - hexdump(len=35): 2a 01 04 32 04 30 48 60 6c 30 18 01 00 00 0f ac 02 02 00 00 0f ac 04 00 0f ac 02 01 00 00 0f ac 02 00 00
      nl80211: ifindex=7
      nl80211: beacon_int=100
      nl80211: beacon_rate=0
      nl80211: rate_type=0
      nl80211: dtim_period=2
      nl80211: ssid=hostapd_test beacon_int=100 dtim_period=2
      nl80211: hidden SSID not in use
      nl80211: privacy=2
      nl80211: auth_algs=0x3
      nl80211: wpa_version=0x2
      nl80211: key_mgmt_suites=0x2
      nl80211: pairwise_ciphers=0x18
      nl80211: group_cipher=0x8
      wlan0: Deauthenticate all stations at BSS start
      nl80211: sta_remove -> DEL_STATION wlan0 ff:ff:ff:ff:ff:ff --> -22 (Invalid argument)
      WPA: Start group state machine to set initial keys
      WPA: group state machine entering state GTK_INIT (VLAN-ID 0)
      Get randomness: len=32 entropy=0
      GTK - hexdump(len=32): [REMOVED]
      WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0)
      wpa_driver_nl80211_set_key: ifindex=7 (wlan0) alg=2 addr=0x8560c key_idx=1 set_tx=1 seq_len=0 key_len=32 key_flag=0x1a
      nl80211: NEW_KEY
      nl80211: KEY_DATA - hexdump(len=32): [REMOVED]
      broadcast key
      nl80211: NL80211_CMD_SET_KEY - default key
      nl80211: Set wlan0 operstate 0->1 (UP)
      netlink: Operstate: ifindex=7 linkmode=-1 (no change), operstate=6 (IF_OPER_UP)
      nl80211: TX queue param set: queue=0 aifs=1 cw_min=3 cw_max=7 burst_time=15 --> res=-95
      Failed to set TX queue parameters for queue 0.
      nl80211: TX queue param set: queue=1 aifs=1 cw_min=7 cw_max=15 burst_time=30 --> res=-95
      Failed to set TX queue parameters for queue 1.
      nl80211: TX queue param set: queue=2 aifs=3 cw_min=15 cw_max=63 burst_time=0 --> res=-95
      Failed to set TX queue parameters for queue 2.
      nl80211: TX queue param set: queue=3 aifs=7 cw_min=15 cw_max=1023 burst_time=0 --> res=-95
      Failed to set TX queue parameters for queue 3.
      wlan0: interface state UNINITIALIZED->ENABLED
      wlan0: AP-ENABLED
      wlan0: Setup of interface done.
      ctrl_iface not configured!
      RTM_NEWLINK: ifi_index=7 ifname=wlan0 operstate=6 linkmode=0 ifi_family=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
      nl80211: Event message available
      nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlan0
      nl80211: New station 78:62:56:c1:26:31
      nl80211: Assoc Req IEs - hexdump(len=0): [NULL]
      wlan0: Event ASSOC (0) received
      wlan0: STA 78:62:56:c1:26:31 IEEE 802.11: associated
      STA did not include WPS/RSN/WPA IE in (Re)AssocReq
      New STA
      ap_sta_add: register ap_handle_timer timeout for 78:62:56:c1:26:31 (300 seconds - ap_max_inactivity)
      No WPA/RSN IE from STA
      nl80211: sta_remove -> DEL_STATION wlan0 78:62:56:c1:26:31 --> 0 (Success)
      nl80211: Set STA flags - ifname=wlan0 addr=78:62:56:c1:26:31 total_flags=0x0 flags_or=0x0 flags_and=0xfffffff1 authorized=0
      nl80211: sta_remove -> DEL_STATION wlan0 78:62:56:c1:26:31 --> 0 (Success)
      ap_free_sta: cancel ap_handle_timer for 78:62:56:c1:26:31
      nl80211: Event message available
      nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlan0
      nl80211: Delete station 78:62:56:c1:26:31
      wlan0: Event DISASSOC (1) received
      wlan0: STA 78:62:56:c1:26:31 IEEE 802.11: disassociated
      Disassociation notification for unknown STA 78:62:56:c1:26:31
      nl80211: Event message available
      nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlan0
      nl80211: New station 78:62:56:c1:26:31
      nl80211: Assoc Req IEs - hexdump(len=0): [NULL]
      wlan0: Event ASSOC (0) received
      wlan0: STA 78:62:56:c1:26:31 IEEE 802.11: associated
      STA did not include WPS/RSN/WPA IE in (Re)AssocReq
      New STA
      ap_sta_add: register ap_handle_timer timeout for 78:62:56:c1:26:31 (300 seconds - ap_max_inactivity)
      No WPA/RSN IE from STA
      nl80211: sta_remove -> DEL_STATION wlan0 78:62:56:c1:26:31 --> 0 (Success)
      nl80211: Set STA flags - ifname=wlan0 addr=78:62:56:c1:26:31 total_flags=0x0 flags_or=0x0 flags_and=0xfffffff1 authorized=0
      nl80211: sta_remove -> DEL_STATION wlan0 78:62:56:c1:26:31 --> 0 (Success)
      ap_free_sta: cancel ap_handle_timer for 78:62:56:c1:26:31
      nl80211: Event message available
      nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlan0
      nl80211: Delete station 78:62:56:c1:26:31
      wlan0: Event DISASSOC (1) received
      wlan0: STA 78:62:56:c1:26:31 IEEE 802.11: disassociated
      Disassociation notification for unknown STA 78:62:56:c1:26:31
      nl80211: Event message available
      nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlan0
      nl80211: New station 78:62:56:c1:26:31
      nl80211: Assoc Req IEs - hexdump(len=0): [NULL]
      wlan0: Event ASSOC (0) received
      wlan0: STA 78:62:56:c1:26:31 IEEE 802.11: associated
      STA did not include WPS/RSN/WPA IE in (Re)AssocReq
      New STA
      ap_sta_add: register ap_handle_timer timeout for 78:62:56:c1:26:31 (300 seconds - ap_max_inactivity)
      No WPA/RSN IE from STA
      nl80211: sta_remove -> DEL_STATION wlan0 78:62:56:c1:26:31 --> 0 (Success)
      nl80211: Set STA flags - ifname=wlan0 addr=78:62:56:c1:26:31 total_flags=0x0 flags_or=0x0 flags_and=0xfffffff1 authorized=0
      nl80211: sta_remove -> DEL_STATION wlan0 78:62:56:c1:26:31 --> 0 (Success)
      ap_free_sta: cancel ap_handle_timer for 78:62:56:c1:26:31
      nl80211: Event message available
      nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlan0
      nl80211: Delete station 78:62:56:c1:26:31
      wlan0: Event DISASSOC (1) received
      wlan0: STA 78:62:56:c1:26:31 IEEE 802.11: disassociated
      Disassociation notification for unknown STA 78:62:56:c1:26:31
      nl80211: Event message available
      nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlan0
      nl80211: New station 78:62:56:c1:26:31
      nl80211: Assoc Req IEs - hexdump(len=0): [NULL]
      wlan0: Event ASSOC (0) received
      wlan0: STA 78:62:56:c1:26:31 IEEE 802.11: associated
      STA did not include WPS/RSN/WPA IE in (Re)AssocReq
      New STA
      ap_sta_add: register ap_handle_timer timeout for 78:62:56:c1:26:31 (300 seconds - ap_max_inactivity)
      No WPA/RSN IE from STA
      nl80211: sta_remove -> DEL_STATION wlan0 78:62:56:c1:26:31 --> 0 (Success)
      nl80211: Set STA flags - ifname=wlan0 addr=78:62:56:c1:26:31 total_flags=0x0 flags_or=0x0 flags_and=0xfffffff1 authorized=0
      nl80211: sta_remove -> DEL_STATION wlan0 78:62:56:c1:26:31 --> 0 (Success)
      ap_free_sta: cancel ap_handle_timer for 78:62:56:c1:26:31
      nl80211: Event message available
      nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlan0
      nl80211: Delete station 78:62:56:c1:26:31
      wlan0: Event DISASSOC (1) received
      wlan0: STA 78:62:56:c1:26:31 IEEE 802.11: disassociated
      Disassociation notification for unknown STA 78:62:56:c1:26:31
      1
    • B

      T507显示分辨率自适应问题
      飞凌嵌入式专区 • Posted at • bsxing

      0 Votes
      1 Replies
      1578 Views

      Y Replied at

      hdmi的分辨率可以指定,也可以使用fb1、fb0双显

      1
    • S

      T3 SPI转CAM-mcp2525发送一帧数据中断一直拉低问题
      飞凌嵌入式专区 • Posted at • shanks1956

      0 Votes
      0 Replies
      1004 Views

      No one has replied

      0

    精华推荐

    • 【水经验混下载权限专用贴】如何升级LV2拉取SDK
    • T113/D1-H (MQ-Pro)驱动 OV5640 摄像头(内含驱动源码)
    • 全志在线开源芯片 新 SDK 平台下载方法汇总
    • 新 SDK 平台下载 D1-H/D1s SDK
    • 新 SDK 平台下载 V853 SDK
    • 新 SDK 平台下载 R329 SDK
    • 新 SDK 平台下载 MR813 SDK
    • 新 SDK 平台下载 XR806 SDK
    • D1s 哪吒开发板,电阻屏的配置方法
    • V85x E907 小核开发与使用
    • [哪吒开发板]Tina Linux SPI主从通信验证实录
    • T113-S3入门资料汇总(避坑指南)一
    • 【加精】D1 tina Docker 编译环境制作和使用
    • Tina Linux 存储介质切换:eMMC,SPI NAND,SPI NOR,SD Card,SD NAND
    • 【资料】V853&&V851 硬件参考设计
    换一批

    随便看看

    • 100s tina 32bit frambuffer
    • sunxi图层之间的显示切换
    • T113 电阻触摸屏 如何配置,
    • 5G技术大发展,PCB板厂工艺和技术新要求,你都了解吗
    • SDK源码获取—R329智能语音开发板入门
    • win10系统安装烧录驱动不成功
    • 直接使用rrtbin文件然后用go无法拉起来吗? 必须要用sbi吗?
    • 在D1开发板上运行Dahdi和Asterisk IPPBX
    • 系统运行一段时间emmc就报错
    • LVDS 显示异常
    • 全志507---千兆网口不能正常使用
    • 请问T113-S3一直运行不稳定,请问可能是有哪些原因啊?
    • 请问D1-H怎样只更新uboot呢?
    • v853报错
    • T113的SPIDEV只能发送几次,就卡住了?
    • 1 / 1

    精华推荐

    • 【水经验混下载权限专用贴】如何升级LV2拉取SDK
    • T113/D1-H (MQ-Pro)驱动 OV5640 摄像头(内含驱动源码)
    • 全志在线开源芯片 新 SDK 平台下载方法汇总
    • 新 SDK 平台下载 D1-H/D1s SDK
    • 新 SDK 平台下载 V853 SDK
    • 新 SDK 平台下载 R329 SDK
    • 新 SDK 平台下载 MR813 SDK
    • 新 SDK 平台下载 XR806 SDK
    • D1s 哪吒开发板,电阻屏的配置方法
    • V85x E907 小核开发与使用
    • [哪吒开发板]Tina Linux SPI主从通信验证实录
    • T113-S3入门资料汇总(避坑指南)一
    • 【加精】D1 tina Docker 编译环境制作和使用
    • Tina Linux 存储介质切换:eMMC,SPI NAND,SPI NOR,SD Card,SD NAND
    • 【资料】V853&&V851 硬件参考设计
    换一批

    随便看看

    • 100s tina 32bit frambuffer
    • sunxi图层之间的显示切换
    • T113 电阻触摸屏 如何配置,
    • 5G技术大发展,PCB板厂工艺和技术新要求,你都了解吗
    • SDK源码获取—R329智能语音开发板入门
    • win10系统安装烧录驱动不成功
    • 直接使用rrtbin文件然后用go无法拉起来吗? 必须要用sbi吗?
    • 在D1开发板上运行Dahdi和Asterisk IPPBX
    • 系统运行一段时间emmc就报错
    • LVDS 显示异常
    • 全志507---千兆网口不能正常使用
    • 请问T113-S3一直运行不稳定,请问可能是有哪些原因啊?
    • 请问D1-H怎样只更新uboot呢?
    • v853报错
    • T113的SPIDEV只能发送几次,就卡住了?